Used Calciner and Indirect Fire Dryers

Stock# 10128036

Used- CO Bartlett & Snow Indirect Fired Rotary Calciner. 14" diameter stainless steel tube. Hot section is 7' 8" long and it has 4 heating zones. Water spray cooling sections is 4'. Overall tube length is 18' 5". Tube is capable of 3.92 rpm to 11.8 rpm. Rated for temperatures up to 1200 F. Equipped with a variable speed 4" x 3' screw type product infeed. Unitize frame. Last used in chemical operation. Overall dimensions: 32' long x 6' wide x 6' high.

Stock# 10678019

Used-Rotary Calciner / Calcining Furnace. Tube is 12" diameter (305 mm) x 22'6" long (7 meter), Assuming Tube is constructed of Stainless steel or better. The unit is natural gas fired with 8 zones / elements. Approximate overall size is 29'6" long (9 meter) x 9'3/4" (3 meter) high and 2m wide. The barrel length is approximate, constructed from stainless steel. Drying temperature 932 - 1,112 deg F (500 - 600 C). Calcining temperature 1,382 - 1,472 deg F (750 - 800 C). Max operating temperature 1,652 deg F (900 deg C). Residence time 1 - 2 hours. Production 10 kg solids/hour. Atmosphere 3% H2/N2. Furnace is used to calcine minrals in powder form or slurry under a protective Hydrogen / Nitrogen atmosphere.

Stock# 10128028

Used- CO Bartlett and Snow Indirect Fired Rotary Calciner. 14" diameter stainless steel tube. Hot section is 7' 8" long and has 4 heating zones. Water spray cooling sections is 4'. Overall tube length is 18' 5". Tube is capable of 3.92 rpm to 11.8 rpm. Rated for temperatures up to 1200 F. A variable speed 4" x 3' screw type product infeed. Mounted on a unitize frame. Overall dimensions are 32' long x 6'wide x 6' high. Last used in chemical operation.

Stock# 47834001

Used- Indirect Fired Continuous Rotary Reactor/Kiln System. Tube is constructed of 304 stainless steel. 970 mm (38.19") diameter x 7100 mm (279.53") long. Stationery chamber is constructed of carbon steel. All wetted pars are 304 stainless steel. Fully automatic North American heater. Temperature is suitable for processing of material up to 600 deg C (1112 Degrees F). Stationery end: 1 end breaching double wall insulated. Heating media: gas/oil. Screw feeder. Skid mounted.

Stock# 49885001

Used- FEECO International Indirect Electrically Heated Rotary Calciner. Approximate 7' diameter x 55' overall length Incoloy 803 drum, approximate 42' (3) zone heated length. Maximum heat input 1050 KW, maximum continuous operating temperature 2,000 degrees F, Counter-current solids and gas flow. Driven by a 20hp, 3/60/230/460 volt, 1750 rpm motor with a Falk reducer, ratio 80.930 to 1. 316 Stainless steel inlet & outlet breeching hoods. Unit was designed to process up to 6.7 wet tons at 50% moisture of paper sludge. Serial# D20063850, built 2006.