Used Homogenizers

Stock# 49670002

Used- APV Gaulin Homogenizer, Type 200-3.0P. Approximately 7,936 gallon (30000 liter) per hour at 3,150 PSI (210 bar). Driven by a 300 hp/200Kw, 3Ph/50cycle/380volt, motor. 3-piston compression block with valve. Stainless steel covers and access door. Mounted on carbon steel frame. Over all dimensions 9’8” (3000 mm) long x 7’8” (2400 mm) w x 5’4” (1650 mm) high. Weight 7.6 tonnes. Built 1999. Includes control panel. Used on milk in the dairy industry.

Stock# 49670003

Used- APV Gaulin Homogenizer, Type G 132Q-2.5P. Approximately 5,820 gallon (22000 liter) per hour at 2,625 PSI (175 bar). Driven by a 198HP/132Kw, 3Ph/50cycle/380volt, motor. 5-Piston compression block with valve. Stainless steel covers and access door. Mounted on carbon steel frame. Over all dimensions 93" (2860 mm) long x 61" (1890 mm) w x 54" (1650 mm) high. Weight 6 tonnes. Built 2005. Includes control panel. Used on milk in the dairy industry.

Stock# 49670005

Used- APV Rannie Homogenizer, Type 75.118. Approximately 4500 gallon (17000 liter) per hour at 3000 PSI (200 bar). Driven by approximate 135 Kw 380volt/3Ph/50cycle motor. 3-piston compression block with valve (2x ceramic, 1 stainless steel). Piston diameter: 2.9" (75 mm), Stroke: 4.6" (118 mm). 2 stage, hydraulic pressure control. Stainless steel covers and access door. Mounted on carbon steel frame. No controls. Over all dimensions 104" (3200 mm) long x 48" (1500 mm) wide x 55" (1700 mm) high. Weight 4.2 tonnes. Built 2000. Used in the dairy industry.

Stock# 49418001

Used- Mizuho Industries Vacuum Emulsifying Homogenizer System, Model VT-1-1000, Stainless Steel. Consisting of (1) 1000 Liter (264 gallon) reactor, product contact 316L stainless steel, jacket 304 stainless steel, approximate 40" diameter x 48" straight side, dished top and bottom, no ratings. Opening top cover: 6" x 4" with sight glass, (3) 3", (3) 2", 1.5", 1" Triple agitation system: (1) anchor style side and bottom scraper, driven by a 7.5 hp, 3/60/460 volt, 1185 rpm motor thru gear box, 1/25 ratio (Requires scrapers). (1) Paddle mixer, (6) inner paddles approximate 7-1/2" x 4" x 1/2" thick, driven by a 3 hp, 3/60/480 volt, 1190 rpm thru gearbox 1/25 ratio. (1) Ultra Mixer, driven by 30 hp, 3/60/480 volt, 3565 rpm motor. Top cover hydraulic lifting system with hydraulic pack driven by 5.5 kW motor. Auto tilting discharge, driven by 1.5 hp motor, also center bottom outlet discharge. (1) Mizuho temperature control unit, Model H.C.-1000, 304 stainless steel, Serial # 39-1156-U, built 1999, 3/60/460 volt. Consists of (1) jacket tank, approximate 48" diameter x 56" straight side, flat top and bottom, (3) separate internal coils, agitator with 3-blade turbine. (1) Circulation pump. (2) Control panels, #1" with (2) temperature controllers, (1) programmable temperature controller, Allen Bradley 1771-P7 PLC, 3" with (3) ABB ACS 600 drives for agitation. Includes gould centrifugal pump, (2) approximate 40 gallon plastic tanks, thermoscientific Model 3510 lab cabinet, hydrofogger, Nash 5 hp vacuum pump, Welch 1/2 hp vacuum pump. System Serial # 39-1156-H. Built 1999.

Stock# 50095001

Used- Avestin Model Emulsiflex B3 Homogenizer. Air powered, single acting, high pressure pump. Maximum pressure 30,000 psi / 200 MPa. Maximum pneumatic pressure 150 psi / 1 MPa. Mounted on a base with rubber feet. Serial# B300720.

Stock# 50095002

Used- Avestin Model Emulsiflex B3 Homogenizer. Air powered, single acting, high pressure pump. Maximum pressure 30,000 psi / 200 MPa. Maximum pneumatic pressure 150 psi / 1 MPa. Mounted on a base with rubber feet. Serial# B300770.

Stock# 49789001

Used- B.E.E. International Ltd. Homogenizer, Model Mini DeBEE. 15-5PH/304 Stainless Steel. Flow rate, 400 milliliters per hour, 22 liters per hour, 6.3 gallons per hour. Continuous flow up to 250 milliliters per minute. Adjustable operating pressure 2,000 to 45,000 PSI (140 to 3,100 BAR). Adjustable back pressure 0 to 5,000 PSI (0 to 345 BAR). 3 phase, 50/60 hertz, 220 VAC-5.5 HP (4KW). Mounted on cart with casters. Serial# 1528.

Stock# 42564001

Used- Avestin High Pressure Homogenizer, Model Emulsiflex-C50, 17-4 PH Stainless Steel. Air/gas driven, double acting high pressure pump. Rated 500 to 30,000 psi maximum, minimum sample 25 milliliters, capacity of 15-50 liters/hour (3.96-13.21 gallons). Requires an electronic control box.

Stock# 49801003

Used- APV Rannie Homogenizer, Type 5-12, 38, 15-7Mo Stainless Steel. Approximate capacity 21 gallons per hour (80 L/H), 5800 psi (400 bar) maximum. 3 piece valve house, manual 2 stage homogenizing valve assembly. Approximate 1" inlet/outlet. Driven by a 3 kW, 3/50/400 volt, 720 rpm motor. Mounted on a frame. Serial# 1-02,119.

Stock# 48882001

Used- APV Homogenizer, Type: LAB100-6TBSX, 304 Stainless Steel. Capacity 31.7 gallons per hour (120 L/H), 5801 psi (400 bar) maximum pressure. 3 piece valve housing, single stage homogenizing valve assembly. Approximately 1" inlet/outlet. Driven by a 2.2 kW motor. Serial# 94L34421. Incomplete/parts needed.

Stock# 47316001

Used- Soavi B. & Figli SPA Homogenizer, Model CA/60R, 2205 Stainless Steel. Rated 5000 liters per hour (1320 gallons) at 175 stroke per minute, maximum pressure 150 bar (2175 psi). (3) Pistons 55 x 345mm. Driven by a 22kw, 3/50/380 volt, 1455 rpm motor. Serial# 1791.

Stock# 45053105

Used- Rannie Homogenizer, Model 50.120H, 2205 Stainless Steel. Capacity 7400 Liters per hour (1954.9 Gallon), maximum homogenizing pressure 552 bar (8004.2 psi). Driven by a 200 hp, 460 volt, 885 rpm motor. 5200 Hours on meter. 50mm Plunger, 120mm stroke. Approximate 900 rpm crank speed. Serial # 1.89.235. Built 1989.

Stock# 49620014

Used- Niro Soavi Homogenizer, Model NS3037-H, 2507 Stainless Steel. Approximate capacities 3170 gallons per hour at 1500 psi to 211 gallons per hour at 22,000 psi. Driven by a 40 hp, 3/60/230/460 volt 1190 rpm motor. Serial # 2437, built 1993. Includes a feed skid with an Alfa Laval GHPD positive displacement pump, Model SRU-4NLS, Serial # 02-5-10008A, driven by a 5 hp, 3/60/230/460 volt, 1725 rpm gear motor, ratio 4.5 to 1, (1) L.J. Star bubble trap, (1) Allegheny Bradford heat exchanger. Shell & tubes rated 150 psi at -20 to 350 degrees F, Serial # 10923-1-1, built 2002, and (2) control panels. Both pieces mounted on casters.