CALL 630-350-2200
View All Equipment Auctions OEM & New Equipment
Appraisals Equipment Reconditioning Asset Management Plant Liquidation Financing
Company Overview Meet Our Team Locations & Contact

Explore our extensive equipment marketplace

Discover a wide range of used processing and packaging machinery tailored to meet your industry needs. Use our advanced search features to find the perfect equipment quickly and efficiently.

Recently added products

https://images.aaronequipment.com/ItemImages/Reactors/Carbon-Steel-and-Alloy-Reactors/Autoclave-Engineers-PV4941_11585100_aa.jpg
View

Stock No.:

11585100

Used Autoclave Engineers PV4941 Hastelloy C High Pressure Reactor – 6000 PSI – 0.25L – Electric Jacketed

Used- Autoclave Engineers Hastelloy C High Pressure Reactor, Model PV4941. Flat top. Dished bottom. Body is approximately 1.75" ID X 6" Deep. Approximately .25 Liter (.066 Gallon) Body rated 6000 psi. Penn Special PV4941. Top head bolted - rated 5700 psi @ 650 degree F. Top mounted drive with agitator. Electric Jacket. Mounted in stand.

MFR: Autoclave Engineers

https://images.aaronequipment.com/ItemImages/Mixers/Double-Arm-Mixer/Paul-O-Abbe-SBM-025_52106003_aa.jpg
View

Stock No.:

52106003

In-Stock Paul O. Abbe 0.25 Gallon Sigma Mixer with Jacket & VFD Controls

New and In-Stock Paul O. Abbe Model SBM-0.25 Laboratory Sigma Blade Mixer. .25 Gallon Working Capacity. Double U" shaped bowl casting machined on center line. Removable idle end allows blades to be removed. 304 SS. Rated Vacuum Internal. Internal and External welds are continuous, ground smooth, flush and pit free. Internal Surface is 180 Grit, 20-30 Ra. External Surface is Glass Bead Blasted. Free flowing open jacket with baffles for even distribution of heating media. Jacket is constructed of 304 SS and rated 14.7 psig @ 400 Deg. F with NPT Connections. Insulation Shroud is 1" Chloride Free Rock Wool with welded SS Shroud. Cover is a Clear Lexan design with Manual Clamps and Safety Switch. Thermowell is mounted through the Lexan Cover. Manual Tilt to Approx. 105 Degrees. Blades are Cast 304 SS Tangential Sigma Design. Four (4) PTFE packing glands with adjustable stainless-steel followers. Four (4) sealed roller bearing on the drive side only. Driven by a HP all stainless steel motor and stainless steel reducer. 304 SS Support Frame. Controls are NEMA 4X Stainless Steel and Supplied Loose. Includes- HP ABB VFD, Speed control potentiometer, RPM readout (front blade speed), Product temperature readout, Start/stop push buttons, Dual pushbuttons for discharge (see drawing below), Forward/reverse switch, Integration of limit switch on cover, Electrical input: 460 volt, 3-phase, 60 Hz, Dimensions 12" W X 24" H x 24". This Mixer is Brand New and In-Stock. Ready for Immediate Delivery and comes with a 1 Year Warranty. It can be inspected under power in our shop in Belvidere, IL.

MFR: Paul O Abbe

https://images.aaronequipment.com/ItemImages/Mixers/Double-Cone-V-Mixers/Patterson-Kelley-LB-17_80685a.jpg
Submit Offer $750 View

Stock No.:

80685

Used Patterson-Kelley 8 Qt Twin Shell Dry Blender – 0.26 Cu. Ft., 304 SS, 1/8 HP Motor

Used- Patterson-Kelley Twin Shell Dry Blender, (0.26) Cubic Feet (8 quart) Capacity, 304 Stainless Steel. (2) 7-1/2" Diameter x 13" long shells, 2 charge ports with (1) cover, (1) missing, oval bottom outlet with cover. Driven by a 1/8 hp, 1/60/115/230 volt, 1725 rpm gearmotor. Mounted on stand.

MFR: Patterson Kelley

https://images.aaronequipment.com/ItemImages/Mixers/Double-Arm-Mixer/Winkworth-MZ2-Vacuum_53031007_aa.jpg
View

Stock No.:

53031007

Used Winkworth Z2 Vacuum Double Arm Mixer – 1.75L, 316 SS, Industrial

Used- Winkworth Vacuum Double Arm Mixer, Model Z2 Vacuum, 316 Stainless Steel. Working capacity 1.75 liters. Approximate 140mm (5.5") x 140mm (5.5") x 109mm (4.29") deep jacketed vacuum trough. Internal rated 60 psi at 300 degrees C (572 F). Jacket rated for 3.5 bar (50psi) at 300 degrees C (572 F). Dual overlapping sigma style mixing blades. Driven by a .37kw (1/2hp), 3/60/460 volt, 1690 rpm gear motor, manual speed control, output 19 to 95 rpm. Top vacuum cover with 2.5" sight glass. Control panel. Includes VWR international model 1166 temperature controller. Base mounted on cart. Serial# 16564.

MFR: Winkworth

https://images.aaronequipment.com/ItemImages/Mixers/Homogenizer-Mixers/Tokushu-Kika_48681_aa.jpg
View

Stock No.:

48681

Used Tokushukika Kogyco Agi-Homo Mixer – 20 Gal, 316 SS, Hydraulic Tilt, Jacketed

Used- Tokushukika Kogyco Co Ltd Agi-Homo Mixer, Model 20-50. 20 Gallon (75 liter) working capacity. 316 Stainless steel polished interior. Stainless steel jacketed rated to 40 psi (2.6 bar). Tiltable bowl 18-1/2" (476 mm) diameter x 18-1/2" (476 mm) deep. Counter rotating paddle agitator with end scrapers. 0.4 kw (0.6 hp) 220 volt. In combination with homo mixer. 2-3/4" (97 mm) diameter turbine blade, 1.5 kw (2.25 hp) 220 volt. Hemi bottom. Dish top with hydraulic tilt. 0.75 kw (1.12 hp) 220 volt. 1-1/2" (41 mm) cbo with shut-off valve. Unitized with separate control panel and starters. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Tokushu Kika

https://images.aaronequipment.com/ItemImages/Dryers-Drying-Equipment/Double-Cone-V-Rotary-Vacuum/Paul-O-Abbe-RCVD-12_53008001_af.jpeg
View

Stock No.:

53008001

Used Paul O Abbe RCVD-12 Rota-Cone Vacuum Dryer – 304 Stainless Steel

Used- Paul O Abbe Rota-Cone Vacuum Dryer, Model RCVD-12, 304 Stainless Steel. Vessel volume: 0.61 cubic feet total, 0.4 cubic feet operating. approximately 12" diameter x 6" straight side bowl. Internal rated 200 psig / FV at -20 to 375 degrees F. Jacket rated 60 psi at -20 to 375 degrees F. Driven by a 1/4HP, 3/60/230-460 volt gear motor, through a reducer 51:1 ratio. Speed of rotation 0 - 5 rpm. (2) 4" openings. Mounted on base. National Board# 253, Serial# 11121-439RCVD. 3/60/240 Volt.

MFR: Paul O Abbe

https://images.aaronequipment.com/ItemImages/Reactors/Stainless-Steel-0-499-Gallon/DCI_45247008_aa.jpg
Submit Offer $1,250 View

Stock No.:

45247008

Used DCI 3-Liter (0.79-Gallon) 316 Stainless Steel Reactor – Jacketed, Vertical

Used- DCI Reactor, 3 Liter (0.79 Gallon), 316 Stainless Steel, Vertical. 6" Diameter x 8" straight side, flat tri-clamp top, dished bottom. Internal rated +40/-15 psi at -20 to 300 degrees F, jacket rated +10/-15 psi at -20 to 300 degrees F. Openings: top 3/4", 5/8", 5/16", 1" tri-clamp; 1/4" center bottom outlet. Mounted on 3 stainless steel legs. Serial #JS2221-E. Built 2002.

MFR: DCI

https://images.aaronequipment.com/ItemImages/Filters/Nutsche-Filter/Rosenmund-RGFD-005-_45874001_aa.jpg
View

Stock No.:

45874001

Used De Dietrich Rosenmund ROLAB RGFD 0.05-09 Filter Dryer for Sale

Used- De Dietrich Rosenmund Pilot Scale Filter/Dryer, Pressure rated Vessel. Type ROLAB RGFD 0.06-09. Material of construction is Hastelloy 2.4602 on product contact parts. Inside volume 11.37 gallon (43 liter). Internal and jacket pressure rated 90PSI (6bar) and full vacuum (-1) at -4-+302 deg F. (-20 to +150 Deg. C). Inside Test pressure 141 PSI (9.4 bar), Jacket test pressure 168 PSI (11.2 bar). Complete with heated agitator, side discharge and drive. Explosion proofed control. On 8 legs, mobile on wheels. Serial # RGFD 0.06-09-20308.

MFR: Rosenmund

https://images.aaronequipment.com/ItemImages/Heat-Exchangers/Shell-and-Tube-Stainless/Alfa-Laval-EH-W15_49896023_aa.jpg
View

Stock No.:

49896023

Used Alfa Laval EH-W15 Heat Exchanger with Control Panel – 60kW, 10 Bar, Built 2014

Used- Alfa laval Model EH-W15 Heat Exchanger. 0,015 m3 (approximately 0.16sqft) shell/tubes volume, 10bar 160 degrees C Shell rating. 3x480 volt, 60kw power requirements. Serial# POM 215963, built 2014. Includes panel. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Alfa Laval

https://images.aaronequipment.com/ItemImages/Filters/Nutsche-Filter/Rosenmund-RGFD_43339002_aa.jpg
View

Stock No.:

43339002

Unused Rosenmund Guedu RGFD Filter Dryer – 316L Stainless Steel, PLC Controlled

Unused- Rosenmund Guedu RGFD Filter Dryer fabricated of 316L stainless steel with approximately 0.25 m2 filtration area. This premium OEM agitated filter dryer was never installed or placed into service. Features include a side solids discharge and column-mounted, two-arm S-blade heated agitator with mechanical seal and bellows for filtration, cake washing, mixing, and vacuum drying in a single enclosed vessel. Includes an APOVAC explosion-proof gas recirculation system and an additional APOVAC unit originally supplied for a tray dryer. Mechanical components are present; however, controls were never built, and the purchaser will need to design and implement a control system. Engineering drawings are available. Ideal for pilot plant, process development, scale-up, and small-batch production of pharmaceutical APIs, fine chemicals, specialty chemicals, biotechnology products, and other high-value materials requiring contained filtration and drying. Built in 2001.

MFR: Rosenmund

https://images.aaronequipment.com/ItemImages/Filters/Nutsche-Filter/Rosenmund-RSD-03-528-89_11585050_aa.jpg
View

Stock No.:

11585050

Rosenmund Filter Dryer RSD -3 Square Meter

Used- Rosenmund Filter Dryer RSD -3, (0.3) Square Meter, Model # RSD-0.3-528-89. T316L stainless steel contacts. Internal rated 100 psi / Full vacuum at 400 degrees F. T304L Stainles steel Jacket rated 150 psi at 400 degrees F. Maximum capacity vessel 45 gallon. Hydraulic agitator. Side discharge. Built 1990. NB 911. Vacuum pump, receiver and control panel. Apovac 3.2/850 PMZF2510 Liquid Ring vacuum pump skid mounted with receiver.

MFR: Rosenmund

https://images.aaronequipment.com/ItemImages/Mills/3-Roll-or-More/52283018_aa.jpg
Submit Offer $6,750 View

Stock No.:

52283018

Used Douglas Aircraft 3-Roll Mill – 2.5" x 7" Rolls, 3/4 HP Motor

Used- Douglas Aircraft 3-Roll Mill. Includes 2-1/2" diameter X 7" face mild steel rolls. Manual spacing adjustment on rolls. Unit includes apron discharge, end plates and electrical panel. Driven by 3/4 HP, 220/440 Volts, 3-phase, 60 Hz, 1725 RPM motor. Foot pedal actuated.

Recently reduced items

https://images.aaronequipment.com/ItemImages/Mixers/Paddle-Mixer/Paul-O-Abbe_52919007_aa.jpeg
Submit Offer $5,190 View

Stock No.:

52919007

Used Paul O Abbe Stainless Steel Fluidizer – 0.7 Cu Ft for Sale

Used- Paul O Abbe Fluidizer, Stainless Steel. Approximate 0.7 cubic feet, 20 liter. Non jacketed trough, 16" wide x 18-1/2" long x 18-1/2" deep. (2) 1-1/2" diameter x 15" long shafts, each have (14) 3" long x 3" wide x 1/8" thick paddles on 1/2" diameter posts. Driven by (2) .33hp, 3/60/230/460 volt, 1700rpm motors, through a reducer 8:1. Bottom bombay doors. 9-1/2" Diameter bottom discharge, 20" discharge height. Includes mounted control panel. Mounted on (4) casters. Serial# A45254.

MFR: Paul O Abbe

https://images.aaronequipment.com/ItemImages/Dryers-Drying-Equipment/Rotary-Hot-Air/Summerlot_52919005_aa.jpg
View

Stock No.:

52919005

Used Summerlot Engineered Products Dryer – 316 Stainless Steel

Used- Summerlot Engineered Products Dryer, 316 Stainless Steel. Cantilevered S/C. 12" long x 6" wide feed hopper, with a 3-3/4" diameter x 48" long screw, 3/4" pitch. Driven by a 1hp, 3/60/208-230/460 volt, 1755 rpm motor. Approximately 10" diameter x 136" long dryer vessel, with (4) fixed baffles. Driven by a 2hp, 3/60/230/460 volt, 1140 rpm motor through reducer, 5.76:1. Approximate 8" diameter discharge with a Flowseal valve. 36" Discharge height. Serial# 88211.

MFR: Summerlot

https://images.aaronequipment.com/ItemImages/Tanks/Stainless-1000-4999-Gal/Vendome-Copper-and-Brass_10128097_aa.jpg
View

Stock No.:

10128097

1,000 gallon Vendome stainless steel processor with dual agitation.

1,000 gallon Vendome stainless steel processor with dual agitation. The bottom and the sides are jacketed. The dimple jackets are rated at 100 psi @ 338F. This unit is equipped with side scrape agitation (5 hp) and a 50 hp top entering homogenizing mixer. 230/460 vac 3 ph electric power required. There is one adjustable baffel inside. The vessel is 72" diameter x 60" straight side with a dished top and bottom. Bottom jacket nozzles are two- 2" RFSO flanges. Side jacket has four-2" RFSO flanges as in/out flanges. Bottom has one 3"tri-clamp nozzle. Top has one- 18" hinged lid manway, one 6" x 18" rectangular inlet, one 6" tri-clamp nozzle, one- 4" sightglass, three-3" nozzles, five- 2" nozzles, and one 1" nozzle. This unit stands on 4 stainless steel pipe legs. National board #299. The skin over the jacket has some dents and repairs. The jackets passed our hydro tests. Built in March 2004.

MFR: Vendome Copper & Brass

https://images.aaronequipment.com/ItemImages/Dryers-Drying-Equipment/Oven/PB-1542_50028005_aa.jpg
View

Stock No.:

50028005

Unused JBT Foodtech FORMCOOK Progrill Contact Cooker – Model PB-1542 Electric ProBake

Unused- JBT Foodtech FORMCOOK Progrill Contact Cooker. Model PB-1542 Electric ProBake. With 10 Degree Incline and Top Belt. Overall Belt Width 60". Usable Belt Width 59", Cooking Length 13.78'. Seven Lower Electric Platens, Upper and Lower Teflon Style Belting. Electrical Specifications 460/3/60 (110/1/60), Electric Drive, Basic Belt Cleaning System, Digital Read-out System, 12" Out-feed Conveyor, Standard Exhaust Fan. Controllogix Processor disconnects on all motors. HMI Screen A. Platens 3/60/460 / 1/60/110 Electric Drive.

Explore our guides.

Enhance your equipment knowledge with our resources.

April 7, 2026

Everything You Should Know Before Buying Used Cannabis Equipment

The cannabis industry has been booming, and with this growth comes the need for efficient and cost-effective manufacturing solutions.

Cannabis Industry Blog

April 7, 2026

Everything You Should Know Before Buying A Used Stainless Steel Tank

What do you need to know before buying a stainless-steel tank?

Tanks Blog

April 7, 2026

Everything You Should Know Before Buying A Used Roll Compactor

Industrial roll compactors play a vital role in material compaction across various industries.

Used Equipment Blog

Sell Equipment

Have surplus equipment? We offer flexible options including direct purchase, consignment, or listing on our marketplace — all backed by trusted professionals.

Learn about selling

Buy Used Equipment

Discover one of the world’s largest inventories of used processing and packaging equipment — ready to ship and backed by decades of industry expertise.

Browse all equipment

Auctions

Join global buyers and sellers at AIS-hosted auctions featuring top-quality surplus equipment from leading facilities around the world.

View current auctions