Used Basket Bottom Dump Centrifuges

Ketema 32" x 20" Mark III Perforated Basket Centrifuge.

Used- Ketema 32" x 20" Mark III Perforated Basket Centrifuge. Stainless steel construction (product contact areas); Top load, bottom unload with hydraulic plow discharge; Max bowl speed 1325 rpm; Rated 96#/cu. ft. capacity, Unit is on 33.5" heavy duty leg extensions; Top cover is sealed and air tight, includes hinged access door; 20 HP hydraulic drive; 3 phase, 230/460 voltage; Includes set of stairs with platform for operator. Previous customer ran with a nitrogen blanket.

MFR: Ketema

Used Sharples SP-5500 Solid Bowl Basket Centrifuge, Sludge Pak

Used- Sharples SP-5500 Sludge-Pak Solid Bowl Basket Centrifuge, 316 Stainless Steel. Maximum bowl speed 1500, tri-pod suspension system, 40" x 24" basket, pneumatic single motion plow assembly, pneumatic skimmer assembly, 3-way skimmer valve, vibration switch, feed pipe, 40 hp oilgear hydraulic drive system, control.

MFR: Sharples

Sandborn 48" x 24" Perforate Basket Centrifuge. Used.

Used-Sandborn 48" x 24" Perforate Basket Centrifuge. 316SS. Bottom unload. Maximum bowl speed 1150 rpm, Maximum operating temp. 150 degrees F. Maximum product bulk density 80 lb/ft3. Maximum pressure .3 psi. Air operated plow. SS feed tube, plow, wash pipe and inspection glass rinse line. Power pack details:20 hp, 1755 rpm, rated for 3800 psi and 300 ft/lb of torque.

MFR: Sanborn

Ketema/ATM 48" x 30" Mark III Perforated Basket Centrifuge. Used.

Used-Ketema/ATM 48" x 30" Mark III Perforated Basket Centrifuge, 316L stainless steel construction (product contact areas), top load, bottom unload, Max bowl speed 1380 rpm, tri-pod suspension, single motion plow, feed and rinse pipes, rated 85#/cu. ft. capacity, hinged inspection door w/sight-glass, (2) CIP nozzles; Built 1992.

MFR: Ketema

Used Escher Wyss V-130 Ploughing Centrifuge – 1250mm SS Bowl, 950 RPM, 30 kW, Hydraulic Drive, Nitrogen Purged

Used- Escher Wyss Ploughing Centrifuge Type V-130 with Stainless Steel Nitrogen Purged Bowl 1,250mm Dia X 600mm Deep with Hydraulic Plough Centrifuge and Drive Motor 30 kW (40.2 hp). Hydromatic Drive with Rexroth Hydraulic Pneumatic Sequence Controls. 950 rpm. Made in 1977. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Escher Wyss

Used US Centrifuge Solid Wall Basket Centrifuge

Used- US Centrifuge Solid Wall Basket Centrifuge, Model M412, Carbon Steel. liquid/solids separation, Hinged top cover with feed pipe, bottom driven with motor. Includes a sludge tank with (2) Wilden diaphragm pumps and a control panel with an Emerson Commander SK drive. Mounted on a common frame. Ideal for liquid clarification application.#!

MFR: US Centrifuge

Used Sandorn 60" x 30" Basket Centrifuge with Scraper Discharge & XP Drive

Used- Sandorn 60" x 30" Basket Centrifuge. Top in/Bottom out. Scraper Discharge. Has a broken suspension link (believe is a 29" link arm). Has 50 HP, explosion proof (XP) Top mounted Drive.

US Centrifuge; Model A262. Used.

Used- US Centrifuge, Model A262; Capable of running up to 40 gallons/minute; Bowl volume 4 Gallons; Maximum Bowl speed 2500 RPM; Bowl diameter 18"; Max "G" Force @ OD 1600 x one gravity; Maximum Operating temperature 160 degrees F; Maximum Particle size 1/4"; Feed Pressure 5 PSI @ 40 gpm; Stainless Steel bowl; unit housed in a 8'x10' container; 50" Long x 34.25" Wide x 50" High (without stand, approximately 90" with stand); Approximately 3,000 lbs (5,000 with container); Last used for manure separation pilot project.

MFR: US Centrifuge

Used Ellerwerk Basket Centrifuge – Stainless Steel, 8.8 Liter Capacity

Used- Ellerwerk Basket Centrifuge. Stainless steel construction. 2300 RPM. 8.8 liter (approx. 2.3 gallon) capacity. 50 degrees C (122 degrees F) max. operating temperature. 6 bar operating pressure. 15mm impeller diameter. Built 1986.

MFR: Ellerwerk