Used Horizontal Belt Extractors

Used WSI 2.2 Meter Extended Gravity Twin Wire Mud Press, Model MM-2200-EXT

Used- WSI 2.2 Meter Extended Gravity Twin Wire Mud Press, Model MM-2200-EXT Gravity. Designed and built to receive pre-processed conditioned" mud sludge flow and remove a major portion of the water (Filtrate) from the mud. The average design flow of the 2.2 meter unit is 250 gallons per minute (gpm). Unit functions to dewater sludge by entrapping a uniform thin layer of conditioned sludge between two endless, porous synthetic belts. The feed box receives conditioned mud sludge flow from the upstream sludge conditioning system and distributes it in a uniform layer over the belt as the belt moves the sludge layer forward from feed box onto the gravity zone. The sludge moving through gravity zone is initially dewatered as gravity pulls the filtrate from the sludge layer through the porous belt to the catchment pan below. The wedge zone entraps the gravity thickened sludge forming a sludge sheet between the two belts. Filtrate (liquid extracted from the sludge) is pressed from the entrapped sludge cake as it traverses the length of the wedge zone to the Doctor blades. Mechanical pressure is applied to the belts to force a major portion filtrate from the sludge as it traverses the machine experiencing ever increasing pressure along its path to the dried sludge discharge point. Dry weight is 35,000 lbs; Serial # WBP-2.2M-25.0-004, New in 2017.

Used Belmer Winkle Press Dewatering Belt Press VPK 2S | High-Capacity Sludge Dewatering System

Used Belmer Winkle Press Dewatering Belt Press VPK 2S | High-Capacity Sludge Dewatering System. Belt working width measures 1500 mm (48") x 15500 mm (50 4") long. 2 x 21 spray nozzles. Water pressure 6 bar (90 PSI), 18 x 188 mm (7.33") Dia driving rolls. Belt speed 2.61 m/min (85"/min), Stainless steel frame. Unit features hydraulically controlled belt tracking device. Includes (1) 4 kW / 6 HP, 400V powerpack feeder belt drive. 1.7 kW / 2.3 hp, 460V main press belt drive with variable speed control (1) Sludge pump, (1) Polymer station (1) Control panel. Overall dimensions 5600 mm (182") long x 2534 mm (823") width (transport width) x 2250 mm (73") high, Weight empty 9.5 tonnes. Operating weight 10.5 tonnes. Previously used in a WWT application. New 2022. Our freight specialists can assist with freight and customs documentation to ensure smooth transition.

Used Press Technologies 120-WT Twin Wire Wedge Thickener | 10’ Belt Sludge Dewatering System

Used- Press Technologies Twin Wire Wedge Thickener, Model 120-WT. 10' wide belt. Uses (2) 40 HP dual press drive motors. Utilizes (2) 12'' wide filtrate drain troughs. Pulp is discharged through 25 HP screw conveyor. Includes all associated electrical components, transformers, pumps, motors, and valves.

MFR: Press Technology

Used Ashbrook-Simon-Hartley Aquabelt Gravity Belt Thickener Type AB Size 4 – Municipal & Industrial Sludge Thickening System

Used Ashbrook-Simon-Hartley Aquabelt Gravity Belt Thickener Type AB Size 4 Municipal & Industrial Sludge Thickening System. Designed for continuous gravity thickening of municipal and industrial wastewater sludges. Unit features an approximately 3.2 meter wide x 9.425 meter long drainage belt supported by a galvanized steel frame and includes a feed tank along with an FRP exhaust hood for odor and vapor containment. Previously installed in a municipal wastewater treatment facility and removed from service following a process change. Suitable for increasing sludge solids concentration ahead of belt filter presses, centrifuges, digesters, and other downstream sludge dewatering equipment.

MFR: Ashbrook

Used Ashbrook-Simon-Hartley Aquabelt Type AB Size 4 Gravity Belt Thickener for Municipal & Industrial Sludge

Used Ashbrook-Simon-Hartley Aquabelt Type AB Size 4 Gravity Belt Thickener for Municipal & Industrial Sludge. Designed for continuous gravity thickening of municipal and industrial wastewater sludges. Unit features an approximately 3.2 meter wide x 9.425 meter long drainage belt supported by a galvanized steel frame and includes a feed tank along with an FRP exhaust hood for odor and vapor containment. Previously installed in a municipal wastewater treatment facility and removed from service following a process change. Suitable for increasing sludge solids concentration ahead of belt filter presses, centrifuges, digesters, and other downstream sludge dewatering equipment.

MFR: Ashbrook

Used Aquabelt Type AB Size 4 Gravity Belt Thickener – Continuous Sludge Thickening System

Used Aquabelt Type AB Size 4 Gravity Belt Thickener Continuous Sludge Thickening System. Designed for continuous gravity thickening of municipal and industrial wastewater sludges. Unit features an approximately 3.2 meter wide x 9.425 meter long drainage belt supported by a galvanized steel frame and includes a feed tank along with an FRP exhaust hood for odor and vapor containment. Previously installed in a municipal wastewater treatment facility and removed from service following a process change. Suitable for increasing sludge solids concentration ahead of belt filter presses, centrifuges, digesters, and other downstream sludge dewatering equipment.

MFR: Ashbrook

Used Komline Sanderson Gravabelt Gravity Belt Thickener for Sale

Used- Komline Sanderson Gravabelt Gravity Belt Thickener, Model G25. Stainless steel construction. 36" W x 23'3" L belt size. 17-85 FPM. 16 GPM @ 85 PSI water requirements. 185 hours. Driven by a 1 HP, 1750 RPM, 3/60/230-460V motor. Previously used for wastewater treatment. OAD: 16'2 L x 5'6 W x 6' H.

MFR: Komline Sanderson