Complete Plants For Sale

Hydrogen Plant, designed by Hydro-Chem (a Linde company)

Used- Hydrogen Plant, designed by Hydro-Chem (a Linde company), operates at a capacity of 2,266 Nm/hr (80,000 SCFH) and produces hydrogen with a purity of 99.99%. Built in 2004, the plant was engineered to use natural gas feedstock composed of 97.97% methane, 1.37% CO2, 2.49% N2, and 3.53% ethane. The hydrogen product maintains a 99.99% purity at a maximum temperature of 100F and a minimum discharge pressure of 200 psig. The syngas reformer utilizes a nickel catalyst. The plant equipment has been dismantled and is ready for quick shipment. Major equipment includes the Feed Heater (HX-101), Desulfurizer Vessel (V-101), Steam/Gas Lateral (SP-779), Reformer (R-101), Reformer Effluent Steam Generator (WH-104), Shift Converter (V-102), Shift Effluent Steam Generator (WH-105), Process Cooler (HX-104), Deaerator Exchanger (HX-103), Boiler Feed Water Exchangers (HX-102A & B), Deaerator (V-106), Steam Drum (V-107), Cold Condensate Separator (V-104), Flue Gas Steam Superheater (WH-101), Flue Gas Steam Generator (WH-102), Blowdown Drum (V-108), Economizer (WH-103), ID Fan (F-101), Cold Condensate Drum (V-104), Vent Gas Drum (V-105), and Adsorbers (A-101A through A-101D).

Title: Used Crown Iron Works Model 48 Milling Ring Flash Drying System? | Industrial Drying System

Used- Crown Iron Works, Model 48, Milling Ring Flash Drying System. It was designed and used for food-grade orange pulp with 17,000 Lbs/Hr capacity but the plant can be used for a wide range of applications in various industries including: Drying food products such as grains, cereals, fruits, vegetables, herbs, and spices. Pharmaceutical ingredients, intermediates, and final products Drying various chemicals, including powders, granules, and crystalline materials Drying minerals and mining products such as ores, concentrates, and mineral powders Animal Feed Drying and processing environmental materials, such as sludges, biomass, and waste products. System designed for drying of powers, filter & centrifuge cakes, and slurries where a discrete and fine end product is desired. The Milling Flash Dryer is basically a low energy jet mill, that uses jets of low-pressure air to encourage inter particle collisions between pieces of feed material. These inter particle collisions break up the feed material in the dryer with no moving parts in the dryer or airstream. The dryer is in the shape of a torus, or donut that is broken up into 2 basic areas: (1) Manifold & Milling area; (2) Classifier. The ideal feed material for the Flash Dryer is a crumbly and free flowing cake that breaks up readily when it enters the drying air stream. The feed material enters the recirculating hot air upstream of the first nozzle, with the centrifugal forces generated by the air concentrating the material in the area above the nozzles. Particle-to-particle collisions begin immediately, deagglomerating the material before hard agglomerates can form. A tremendous amount of surface area is created allowing evaporation to occur quickly, thereby depressing air temperature in a very short period of time. Centrifugal forces are generated by the recirculating gases within the dryer, forcing the larger particles to the peripheral walls. Finer material is displaced towards the inside radius of the dryer where the classifier outlet is located. Fine product exits the dryer along with the exhaust gas vapor. Larger particles or agglomerates are recycled to the nozzle area dryer for further de-agglomeration and drying.

MFR: Crown Iron Works

LIQUIDATION - Refrigerated Joule Thomson Effect (J-T) Natural Gas Liquids Extrac

Used- Joule Thomson Effect, Refrigerated Joule Thomson Effect (J-T) Natural Gas Liquids Extraction Plant" Consisting of: Mol Sieve Dryer Skid and Accumulator/Economizer Skid: AND JT Skid with Liquid Separators: - 1,535 MBTU/HR Cold gas/ gas exchanger, 1200 PSIG Tube 720 PSIG Shell - High Pressure Cold Separator, 24" x 8, 1200 PSIG- Low Pressure Cold Separator, 30" x 10, 720 PSIG - Optimux 4 20 mA controllers, Rosemount guided wave level transmitters, Foxboro pressure and temperature transmitters - Accumulator, 36" x 8 300 PSIG - Economizer, 24" x 8 300 PSIG - Optimux 4 20 mA controllers, Rosemount guided wave level Transmitter, Foxboro pressure transmitters - 15,000 MCFD at = 10 lbs/MMSCF water inlet for 1 PPM water outlet - Inlet Coalescer: 16" x 76", 1200 PSIG, - Inlet Dryers: 42" x 116", 1200 PSIG - On skid PLC controlled 120 kW regeneration gas heater- 10 Micron dust filter, 1200 PSIG - Regeneration gas cooler and separator, 301 MBTU/HR, 250 PSIG - Optimux 4 20 mA controllers, Rosemount guided wave level transmitters, Foxboro pressure and flow transmitters-Electronic controlled, pneumatically operated AE switching valves AND Chiller kid - 2,119 MBTU/HR Warm gas/ gas exchanger, 1200 PSIG Tube 720 PSIG Shell- 949 MBTU/HR Chiller, 1200 PSIG Tube 300 PSIG Shell- Vaporizer, 300 PSIG - Optimux 4 20 mA controllers, Rosemount guided wave level transmitter, Foxboro pressure transmitter. Also includes Skid Mounted Gas Compressor 800 HP, 15 Foot Bore x 16 " Stroke, 300 to 400 rpm, with Harsco Model Ajax 108H Gas Cooler and DCL Model RCZ2110V14 Exhaust Muffler and Accessories. Delivery and Metering System to Include: ECI Battery Cabinet (2013) Hydra-Cell Model D10C9300002 , Explosion Proof Pump (2014), Micro Motion Midel CMF50M314N6BAEZZZ Mass Flow Meter (2014) Micro Motion Model CMF300M356N6BAEZZZ Mass Flow Meter (2014) with Assorted Piping nd Valves and Holding Tank, Liquid Controls Model ESAR/SP3 Flow Meters, (2014) Each with Digital Readouts and Accessories; (Readouts are Located in Office), Explostion Proof Pump, (2013) 20 HP. Explosion Proof Pump (2013) 20 HP, etc.

Wax Solvent Recrystallization Unit.

Used- Wax Solvent Recrystallization Unit. Design built by Plant Process Equipment, rated approximately 400 bbl./day. Skid mounted. All pressure vessels are National Board rated. Designed to 5% oil remaining in paraffin wax from a plastic to fuels facility. Major pieces of equipment include: - 8 scraped wall exchangers - 2 rotary drum filters - Ammonia refrigeration system - Fulton hot oil skid - 2 random packed stripper columns - Associated vessels, heat exchangers, pumps, instruments, etc. More information to come and upon request. Built 2020.

30 TPD ASU with NLU Plant

Used- 30 TPD ASU with NLU Plant designed & supplied by Cosmodyne USA in 1995. Argon purification unit non-cryogenic (H2 used for O2 removal). Power 1,361 kW. Main products; Liquid Oxygen (LOX) purity 99.6% O2 Liquid Nitrogen (LIN) purity 5 ppm O2 Liquid Argon (LAr) purity 99.999% Ar. Main equipment; Main air compressor; Ingersoll Rand Nitrogen compressors; Ingersoll Rand Expansion turbines; ACD Pre-purification unit; Cosmodyne Refrigeration units Coldbox; Cosmodyne Control system Siemens PCS7; ASU had been in operation since commissioning in 1996 and was stopped in Q3 2023 due to commissioning of new ASU. Refurbished rotor assemblies for air compressor available as spare. Refurbished spare motor available that can be used for air or nitrogen compressors. ASU major turnaround maintenance required before restart. The plants expansion turbine, nitrogen & main compressors, pre-purification, refrigeration units and all other machinery are in good condition, and the plant itself is in fully working and operational condition. Additionally, the control panel is modified to the latest PCS-7M Siemens Control System. Plat equipment: (3) Centec main air compressors; (2) ACD turbines; (1) Jalal cooling tower; (3) cooling water pumps; (3) Copland refrigeration systems; (1) Cosmodyne purification skid; (1) Cosmodyne argon purification skid; (1) Cosmodyne cold box; (1) Cosmodyne Control Room and LV Power distribution panels (containerized); (3) Servomax O2 analyzers; (1) Teledyne N2% analyzer; (1) Teledyne hydrogen % analyzer; (1) Horiba PPM CO2 analyzer; (1) Cryogenic Batch tank (12000Sm3 Liquide Oxygen); (1) Cryognic Liquid Oxygen transfer pump.

Used Complete 153,000bpd Crude Oil Terminal Stabilization Plant

Used- Complete 153,000bpd Crude Oil Terminal Stabilization Plant consisting of: (1) Degasser Unit (Unit ID 9600) with Heat Transfer Unit, (1) Gas Plant (Unit ID 9400), (1) Liquified Gas Treating Unit (Unit ID 9330). Including piping, valves, safety equipment and additional infrastructure. Further details and technical documentation are available upon request. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

Used ANHYDRO Falling Film Vacuum Evaporator – 6,500 kg/h | MVR x2 | 5 Calendria | CIP

Used- ANHYDRO falling film vacuum evaporator. Complete ANHYDRO falling film vacuum evaporator with mechanical vapour recompression units Was originally designed as a TVR evaporator and in operation for milk concentration in a Norwegian dairy. This evaporator plant was relocated and redesigned by BONTECH A/S (Denmark) for 6.500 kg/hour water evaporation for stick water from fish industry and now operating with 2 units of mechanical vapour recovery units (MVR) in serial connection. The 5 calendria has a total of 121, 100, 38, 38 and 13 pipes - each ?51 mm and 7 meters long. It is complete with CIP plant and still installed. This plant is in excellent working condition and ready to be relocated and put back in operation, after reconditioning of pumps etc. The Westfalia separator is not included in this listing. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible

MFR: Anhydro

Used Fishmeal Plant – 10 MT/Hour Raw Material Intake, Complete Processing Line

Used- Fishmeal Plant, 10 MT/Hour raw material intake consisting of: Infeed mill breaker, Atlas vertical cooker, Atlas screw press, Atlas disc dryer, Alfa Laval decanter, Flottweg Tricanter, 3 effect Evaporator, Cooling towers, Morisa Boilers, Conveying, Controls and additional infrastructure. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

Used Complete Lipids Production Plant – Evaporator, Alfa Laval Disc Centrifuge, Centritherm & Tanks

Used- Complete Lipids Production Plant. Consisting of: Modified Niro recirculating single effect evaporator (Ethanol extraction) operating in a semi-continuous manner. Alfa Laval Centri-therm Model CT6, 1.1kg(lb) per kg (lb) evaporated water, max concentrate viscosity 20,000cP, 11.5kW. Seitel Model SE13X centrifugal self-cleaning separator, sludge chamber capacity 1.7 liter, bowl speed 9600rpm, 5.5kW, max outlet pressure 4 bar, skimming capacity 2,000 liter, clarification & standardization capacity 3,000 liter per hour. CECO Rotary Sieve / Strainer Lipids filter tank. Page & Macrae Condenser vessel, shell rated 5 to 95 degrees C at -101.4 to 0 kPA, tube rated 24 to 35 degrees C at 0 to 500 kPa. Jacketed and single wall Stainless steel Tanks and Reactors, Heat Exchangers, Pumps, Valves, Controls. Bag Dump station & screw conveyor ancillary controls, and piping. Being sold as is, loaded on customers trucks. All motors are 50 cycles. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

Used Crown Iron Works Model 48 Milling Ring Flash Drying System | Food Grade Industrial Flash Dryer

Used- Crown Iron Works, Model 48, Milling Ring Flash Drying System. It was designed and used for food-grade orange pulp with 17,000 Lbs/Hr capacity but the plant can be used for a wide range of applications in various industries including: Drying food products such as grains, cereals, fruits, vegetables, herbs, and spices. Pharmaceutical ingredients, intermediates, and final products Drying various chemicals, including powders, granules, and crystalline materials Drying minerals and mining products such as ores, concentrates, and mineral powders Animal Feed Drying and processing environmental materials, such as sludges, biomass, and waste products. System designed for drying of powers, filter & centrifuge cakes, and slurries where a discrete and fine end product is desired. The Milling Flash Dryer is basically a low energy jet mill, that uses jets of low-pressure air to encourage inter particle collisions between pieces of feed material. These inter particle collisions break up the feed material in the dryer with no moving parts in the dryer or airstream. The dryer is in the shape of a torus, or donut that is broken up into 2 basic areas: (1) Manifold & Milling area; (2) Classifier. The ideal feed material for the Flash Dryer is a crumbly and free flowing cake that breaks up readily when it enters the drying air stream. The feed material enters the recirculating hot air upstream of the first nozzle, with the centrifugal forces generated by the air concentrating the material in the area above the nozzles. Particle-to-particle collisions begin immediately, deagglomerating the material before hard agglomerates can form. A tremendous amount of surface area is created allowing evaporation to occur quickly, thereby depressing air temperature in a very short period of time. Centrifugal forces are generated by the recirculating gases within the dryer, forcing the larger particles to the peripheral walls. Finer material is displaced towards the inside radius of the dryer where the classifier outlet is located. Fine product exits the dryer along with the exhaust gas vapor. Larger particles or agglomerates are recycled to the nozzle area dryer for further de-agglomeration and drying.

MFR: Crown Iron Works

Complete Plastics Recycling & Compounding Manufacturing Plant Featuring Multiple Twin Screw Extrusion Lines, Recycling Systems, Silos, Laboratories & Industrial Real Estate

Used- Complete Plastics Compounding Extrusion Plant consisting of: (1) Leistriz ZSE 60-40D MAXX Twin Screw Extrusion Line output 900-1200 kgs per hour, (1) Coperion ZSK 70 SC Twin Screw Extrusion Line output 800-1000 per hour, (1) Noris ZSC 60 Twin Screw Extrusion Line output 650-800 kgs per hour, (1) Leistritz ZSE 60 MAXX-36D Twin Screw Extruder, (1) Lindner Micromat 2500 Single Roll Shredder, (1) Dreher Plastics Granulation & Washing System, (1) THM Recycling Solutions Granulation System, (1) Zeppelin CMB 300 High Intensive Mixer.(6) Zeppelin Silos, (1) Pilot Plant, (2) Labs, (1) Injection Molding Machine, Workshop, Waste Water Treatment, Production and Storage buildings & much more. Previously used in a plastic recycling application. Can be purchased incl. buildings and land.

Linde Engineering C3 splitter plant

Used- Linde Engineering C3 splitter plant unit with a feed capacity of 14 tons/hr. of chemical grade propylene and 23 tons/hr. of refinery grade propylene. Equipment suits for polymer raisin production plants for PET/PP/HDPE/LDPE. New 2012, Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Linde