Explore our extensive equipment marketplace

Discover a wide range of used processing and packaging machinery tailored to meet your industry needs. Use our advanced search features to find the perfect equipment quickly and efficiently.


Recently added products

https://images.aaronequipment.com/ItemImages/Generators/Diesel-Fuel-and-Natural-Gas-Fuel/MTU-Onsite-Energy-DS900_54541007_aa.jpg

Stock No.:

54541007

MTU Rolls-Royce 900 kW Standby Generator – Tier 2 Diesel Engine – Unused 2024

MTU Rolls-Royce 900 kW Standby Generator Tier 2 Diesel Engine Unused 2024. Rated 900 kW/1125 kV. MTU 22.4L Diesel Engine, 1800 RPM, EPA Tier 2 Certified for Emergency Standby. Permanent Magnet Generator Alternator with Digital Voltage Regulator & Generator Strip Heater. Sound Level 3 Enclosure with Vertical Air Discharge, Steel Construction, 130 MPH Wind Load Rated, 74.9 dBA, Space Heater, Motorized Intake Louvers. Internally Mounted Silencer within Enclosure, Critical Grade. MGC-3050 Digital Control Panel, Mounted Left Side, Paralleling Capabilities. ModBus TCP/IP Communications. Remote Mounted Annunciator, Meets NFPA 110 Level 1. Remote Mounted Emergency Stop, Break Glass Station, Nema 3R For Outdoor Installation. 1200 Amp Breaker, 3-Pole, 100% Rated with Electronic LSI Trip, Mounted Right Side, Motor Operated Block. 5000W, 1ph, 208V Heater. 10 Amp, 24VDC / 120VAC 1ph Battery Charger. NFPA-110 Level 1 Compliance, UL2200 Listed Fuel Tank: 1515 Gallon, 24 Hour Run Time at Full Load, UL 142 Listed. Built 2024.

MFR: MTU Onsite Energy

https://images.aaronequipment.com/ItemImages/Generators/Diesel-Fuel-and-Natural-Gas-Fuel/MTU-Onsite-Energy-DS900_54541008_aa.jpg

Stock No.:

54541008

2024 MTU Rolls-Royce DS900 900 kW Diesel Generator Set – UL2200 Listed & NFPA 110 Level 1

Unused- 2024 MTU Rolls-Royce DS900 900 kW Diesel Generator Set UL2200 Listed & NFPA 110 Level 1. Rated 900 kW/1125 kV. MTU 22.4L Diesel Engine, 1800 RPM, EPA Tier 2 Certified for Emergency Standby. Permanent Magnet Generator Alternator with Digital Voltage Regulator & Generator Strip Heater. Sound Level 3 Enclosure with Vertical Air Discharge, Steel Construction, 130 MPH Wind Load Rated, 74.9 dBA, Space Heater, Motorized Intake Louvers. Internally Mounted Silencer within Enclosure, Critical Grade. MGC-3050 Digital Control Panel, Mounted Left Side, Paralleling Capabilities. ModBus TCP/IP Communications. Remote Mounted Annunciator, Meets NFPA 110 Level 1. Remote Mounted Emergency Stop, Break Glass Station, Nema 3R For Outdoor Installation. 1200 Amp Breaker, 3-Pole, 100% Rated with Electronic LSI Trip, Mounted Right Side, Motor Operated Block. 5000W, 1ph, 208V Heater. 10 Amp, 24VDC / 120VAC 1ph Battery Charger. NFPA-110 Level 1 Compliance, UL2200 Listed Fuel Tank: 1515 Gallon, 24 Hour Run Time at Full Load, UL 142 Listed. Built 2024.

MFR: MTU Onsite Energy

https://images.aaronequipment.com/ItemImages/Generators/Diesel-Fuel-and-Natural-Gas-Fuel/MTU-Onsite-Energy-DS900_54541009_aa.jpg

Stock No.:

54541009

Unused MTU Rolls-Royce DS900 900 kW Emergency Standby Diesel Generator with 1,515 Gallon Fuel Tank

Unused MTU Rolls-Royce DS900 900 kW Emergency Standby Diesel Generator with 1,515 Gallon Fuel Tank. Rated 900 kW/1125 kV. MTU 22.4L Diesel Engine, 1800 RPM, EPA Tier 2 Certified for Emergency Standby. Permanent Magnet Generator Alternator with Digital Voltage Regulator & Generator Strip Heater. Sound Level 3 Enclosure with Vertical Air Discharge, Steel Construction, 130 MPH Wind Load Rated, 74.9 dBA, Space Heater, Motorized Intake Louvers. Internally Mounted Silencer within Enclosure, Critical Grade. MGC-3050 Digital Control Panel, Mounted Left Side, Paralleling Capabilities. ModBus TCP/IP Communications. Remote Mounted Annunciator, Meets NFPA 110 Level 1. Remote Mounted Emergency Stop, Break Glass Station, Nema 3R For Outdoor Installation. 1200 Amp Breaker, 3-Pole, 100% Rated with Electronic LSI Trip, Mounted Right Side, Motor Operated Block. 5000W, 1ph, 208V Heater. 10 Amp, 24VDC / 120VAC 1ph Battery Charger. NFPA-110 Level 1 Compliance, UL2200 Listed Fuel Tank: 1515 Gallon, 24 Hour Run Time at Full Load, UL 142 Listed. Built 2024.

MFR: MTU Onsite Energy

https://images.aaronequipment.com/ItemImages/Reactors/Stainless-Steel-500-999-Gallon/Imperial-Steel_52393002_aa.jpeg

Stock No.:

52393002

Used Imperial Steel 900 Gallon Reactor – 304 Stainless Steel, 60 PSI

Used- Imperial Steel Reactor, Approximately 900 Gallon Capacity, 304 Stainless Steel. Approximately 75" diameter x 36" straight side. Dished top and bottom. Internal rated 60 psi at -20 to 200 degrees F. Shell 4" half oval coil jacket rated 60 psi at 200 degrees F, bottom head bar type jacket. Openings top: 18" diameter manway with cover, 6", (4) 2", (2) 1". 2" Center bottom outlet. Mounted on (4) carbon steel legs. Serial# Y04-019, National Board# 2167.

MFR: Imperial Steel

https://images.aaronequipment.com/ItemImages/Tanks/Stainless-5000-Gal-and-up/Unknown_50800043_aa.jpg

Stock No.:

50800043

Used 9,000 Gallon Stainless Steel Insulated Storage Tank – 112" Diameter x 272" OAH

Used- Approximate 9,000 Gallon Stainless Steel Tank, 112" diameter x 272" overall height. Cone top, dish bottom, insulated. Top and side manway. Mounted on 4 carbon steel legs.

MFR: Unknown

https://images.aaronequipment.com/ItemImages/Tanks/Stainless-5000-Gal-and-up/54344001_aa.jpg

Stock No.:

54344001

Used M.L. Smith Jr. 9,000 Gallon 316L Stainless Steel Vertical Tank – 8' x 24', 200°F Rated

Used- M.L Smith Jr. 316L Stainless Steel Vertical Tank, 9,000 Gallon. 96" diameter x 288" straight side. 3/16" thick walls. Atmospheric at 200 degrees F. Slight cone top, flat bottom. Openings Top: 6", 3". (2) 24" diameter side manways, 3" side bottom outlet with 6" discharge height. Serial# 0298. Built 2006.

https://images.aaronequipment.com/ItemImages/Reactors/Stainless-Steel-5000-Gallon-and-up/Industrial-Alloy-Fab_53767003_aa.jpg

Stock No.:

53767003

Used 9,000 Gallon 316 SS Vertical Agitated Reactor | Half-Pipe Jacket | Full Vacuum | Internal Coil | Industrial Alloy Fabricators

Used 9,000 Gallon 316 SS Vertical Agitated Reactor | Half-Pipe Jacket | Full Vacuum | Internal Coil | Industrial Alloy Fabricators. Approx. 108" D x approx. 259" straight side. 6" D bottom outlet. Flat top and bottom. 15 PSI internal pressure. 300 degrees F internal temp. 50 PSI jacket pressure. 300 degrees F jacket temp. Half pipe/limpet jacket type. Full vacuum internal. 304 stainless steel jacket. Has internal coil. Has (4) sidewall mounted, full-length straight baffles. Wide sweep impeller. Two-tier, (3) blade agitator. 2.5 HP, 37 RPM drive. 1.5HP, 1155 RPM motor. NB 2033. Mounted on skirt. Built 1992.

MFR: Industrial Alloy Fab

https://images.aaronequipment.com/ItemImages/Reactors/Stainless-Steel-5000-Gallon-and-up/Industrial-Alloy-Fab_53767005_aa.jpg

Stock No.:

53767005

Used 9,000 Gallon 316 Stainless Steel Jacketed Reactor with Internal Coil & Agitation | Industrial Alloy Fabricators

Used 9,000 Gallon 316 Stainless Steel Jacketed Reactor with Internal Coil & Agitation | Industrial Alloy Fabricators. Stainless Steel 316. Approx. 108" D x approx. 259" straight side. 6" D bottom outlet. Dish top and bottom. 15 PSI internal pressure. 300 degrees F internal temp. 50 PSI jacket pressure. 300 degrees F jacket temp. Half pipe/limpet jacket type. Full vacuum internal. 304 stainless steel jacket. Has internal coil. Has (4) sidewall mounted, full-length straight baffles. Wide sweep impeller. Two-tier, (3) blade agitator. 2.5 HP, 37 RPM drive. 1.5HP, 1155 RPM motor. NB 2032. Mounted on skirt. Built 1992.

MFR: Industrial Alloy Fab

https://images.aaronequipment.com/ItemImages/Heat-Exchangers/Plate-Type/TetraPak-N35_53485001_aa.jpg

Stock No.:

53485001

Used APV (Tetra Pak) Plate Heat Exchanger – Model N35, 908 Sq. Ft., 10 Bar

Used- APV (Tetra Pak) Plate Heat Exchanger, Model N35. 84.4 m2 / 908 Square Feet. 10 bar (145 psi). 0 - 95 degrees c (32 - 203 degrees F.). Qty (300) plus Plates. Control panel with A/B panelview plus 600 HMI. Mounted on expandable frame.

MFR: TetraPak

https://images.aaronequipment.com/ItemImages/Reactors/Stainless-Steel-5000-Gallon-and-up/14191139_aa.jpg

Stock No.:

14191139

Unused 9,100-Gallon 304L Stainless Steel Reactor by Borghi Srl

Unused 304L Stainless Steel Reactor, 9100 Gallon Capacity. Manufactured by Borghi Srl. 8200 gallon working capacity. Internal MAWP 87 psi @ 400F. Halfpipe jacket MAWP 174 psi @ 400F. Half pipe jacketed on bottom half of shell and bottom head. Sanitary polished internal and exterior top shell. Dome top and bottom with 2" Center bottom outlet. Top flange and (4) internal baffles with vortex breaker. (4) Lug mounted. Does not include motor and agitator. 20" top manway. Diameter 9.84 ft x height 19.03 ft. Weight 21,605 lb. National Board and PED (Double certification). Serial #PP052B, NB #5. Built 2025. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

https://images.aaronequipment.com/ItemImages/Plastics-Equipment/Cast-Film-Lines/Unknown_49296010_aa.jpg

Stock No.:

49296010

Used Industrial Bare Middle Cooling Roll – 36" O.D. x 92" Face for PV Film Processing

Used- Bare Middle Cooling Roll. 36" O.D. x 92" face. For Schkopau PV film line.

MFR: Unknown

https://images.aaronequipment.com/ItemImages/Plastics-Equipment/Cast-Film-Lines/Unknown_49296011_aa.jpg

Stock No.:

49296011

Used Bare Middle Cooling Roll for Schkopau PV Film Line – 36" O.D. x 92" Face

Used- Bare Middle Cooling Roll For Schkopau PV film line. 36" O.D. x 92" face.

MFR: Unknown

Recently reduced items

https://images.aaronequipment.com/ItemImages/Mixers/Paddle-Mixer/Paul-O-Abbe_52919007_aa.jpeg

Stock No.:

52919007

Used Paul O Abbe Stainless Steel Fluidizer – 0.7 Cu Ft for Sale

Used- Paul O Abbe Fluidizer, Stainless Steel. Approximate 0.7 cubic feet, 20 liter. Non jacketed trough, 16" wide x 18-1/2" long x 18-1/2" deep. (2) 1-1/2" diameter x 15" long shafts, each have (14) 3" long x 3" wide x 1/8" thick paddles on 1/2" diameter posts. Driven by (2) .33hp, 3/60/230/460 volt, 1700rpm motors, through a reducer 8:1. Bottom bombay doors. 9-1/2" Diameter bottom discharge, 20" discharge height. Includes mounted control panel. Mounted on (4) casters. Serial# A45254.

MFR: Paul O Abbe

https://images.aaronequipment.com/ItemImages/Dryers-Drying-Equipment/Rotary-Hot-Air/Summerlot_52919005_aa.jpg

Stock No.:

52919005

Used Summerlot Engineered Products Dryer – 316 Stainless Steel

Used- Summerlot Engineered Products Dryer, 316 Stainless Steel. Cantilevered S/C. 12" long x 6" wide feed hopper, with a 3-3/4" diameter x 48" long screw, 3/4" pitch. Driven by a 1hp, 3/60/208-230/460 volt, 1755 rpm motor. Approximately 10" diameter x 136" long dryer vessel, with (4) fixed baffles. Driven by a 2hp, 3/60/230/460 volt, 1140 rpm motor through reducer, 5.76:1. Approximate 8" diameter discharge with a Flowseal valve. 36" Discharge height. Serial# 88211.

MFR: Summerlot

https://images.aaronequipment.com/ItemImages/Tanks/Stainless-1000-4999-Gal/Vendome-Copper-and-Brass_10128097_aa.jpg

Stock No.:

10128097

1,000 gallon Vendome stainless steel processor with dual agitation.

1,000 gallon Vendome stainless steel processor with dual agitation. The bottom and the sides are jacketed. The dimple jackets are rated at 100 psi @ 338F. This unit is equipped with side scrape agitation (5 hp) and a 50 hp top entering homogenizing mixer. 230/460 vac 3 ph electric power required. There is one adjustable baffel inside. The vessel is 72" diameter x 60" straight side with a dished top and bottom. Bottom jacket nozzles are two- 2" RFSO flanges. Side jacket has four-2" RFSO flanges as in/out flanges. Bottom has one 3"tri-clamp nozzle. Top has one- 18" hinged lid manway, one 6" x 18" rectangular inlet, one 6" tri-clamp nozzle, one- 4" sightglass, three-3" nozzles, five- 2" nozzles, and one 1" nozzle. This unit stands on 4 stainless steel pipe legs. National board #299. The skin over the jacket has some dents and repairs. The jackets passed our hydro tests. Built in March 2004.

MFR: Vendome Copper & Brass

https://images.aaronequipment.com/ItemImages/Dryers-Drying-Equipment/Oven/PB-1542_50028005_aa.jpg

Stock No.:

50028005

Unused JBT Foodtech FORMCOOK Progrill Contact Cooker – Model PB-1542 Electric ProBake

Unused- JBT Foodtech FORMCOOK Progrill Contact Cooker. Model PB-1542 Electric ProBake. With 10 Degree Incline and Top Belt. Overall Belt Width 60". Usable Belt Width 59", Cooking Length 13.78'. Seven Lower Electric Platens, Upper and Lower Teflon Style Belting. Electrical Specifications 460/3/60 (110/1/60), Electric Drive, Basic Belt Cleaning System, Digital Read-out System, 12" Out-feed Conveyor, Standard Exhaust Fan. Controllogix Processor disconnects on all motors. HMI Screen A. Platens 3/60/460 / 1/60/110 Electric Drive.

Explore our guides.

Enhance your equipment knowledge with our resources.

Read Everything You Should Know Before Buying Used Cannabis Equipment

Everything You Should Know Before Buying Used Cannabis Equipment

The cannabis industry has been booming, and with this growth comes the need for efficient and cost-effective manufacturing solutions.

Read Everything You Should Know Before Buying A Used Stainless Steel Tank

Everything You Should Know Before Buying A Used Stainless Steel Tank

What do you need to know before buying a stainless-steel tank?

Read Everything You Should Know Before Buying A Used Roll Compactor

Everything You Should Know Before Buying A Used Roll Compactor

Industrial roll compactors play a vital role in material compaction across various industries.

Sell Equipment

Have surplus equipment? We offer flexible options including direct purchase, consignment, or listing on our marketplace — all backed by trusted professionals.

Buy Used Equipment

Discover one of the world’s largest inventories of used processing and packaging equipment — ready to ship and backed by decades of industry expertise.

Auctions

Join global buyers and sellers at AIS-hosted auctions featuring top-quality surplus equipment from leading facilities around the world.