CALL 630-350-2200
View All Equipment Auctions OEM & New Equipment
Appraisals Equipment Reconditioning Asset Management Plant Liquidation Financing Centrifuge Parts & Services
Company Overview Meet Our Team Locations & Contact

Explore our extensive equipment marketplace

Discover a wide range of used processing and packaging machinery tailored to meet your industry needs. Use our advanced search features to find the perfect equipment quickly and efficiently.

Recently added products

https://images.aaronequipment.com/ItemImages/Cooling-Towers/Cooling-Towers/Marley-MHF7113_54334001_aa.jpg
View

Stock No.:

54334001

Used Marley Double Flow Cooling Tower | 450 Ton Industrial Cooling System (Model MHF7113)

Used- 450 Ton Marley Double Flow Cooling Tower Model MHF7113. 410-746 ton cooling capacity, based on 3gpm/ton at 95 f hot water 85 F cold water 78 F wet bulb configuration. Built 2016. Dimensions 13'-11" long x 25'-10" wide x 22' tall 41,310lbs.

MFR: Marley

https://images.aaronequipment.com/ItemImages/Tanks/Stainless-1000-4999-Gal/Mueller-Corp_10151628_aa.jpg
View

Stock No.:

10151628

Used Mueller 4,150 Gallon Stainless Steel Jacketed Tank | Brewery Fermentation Vessel

Used- Mueller 4,150 gallon Stainless Steel Jacketed Tank.97 7/16" OD x 219". Internal rated 15 psi at 100 degrees F.304 stainless steel, vertical, dished head, cone bottom.Serial # 164585-1. Previous use was for brewery fermentation.

MFR: Mueller Corp

https://images.aaronequipment.com/ItemImages/Tanks/Stainless-1000-4999-Gal/Mueller-Corp_10151629_aa.jpg
View

Stock No.:

10151629

Mueller 4,150 Gallon Stainless Steel Fermentation Tank – Jacketed Vessel

Mueller 4,150 Gallon Stainless Steel Fermentation Tank Jacketed Vessel.97 7/16" OD x 219". Internal rated 15 psi at 100 degrees F.304 stainless steel, vertical, dished head, cone bottom. Serial # 164585-2.Previous use was for brewery fermentation.

MFR: Mueller Corp

https://images.aaronequipment.com/ItemImages/Tanks/Stainless-1000-4999-Gal/Mueller-Corp_10151630_aa.jpg
View

Stock No.:

10151630

Used Mueller 4,150 Gallon Brewery Fermenter – Stainless Steel Tank

Used Mueller 4,150 Gallon Brewery Fermenter Stainless Steel Tank. 97 7/16" OD x 219".Internal rated 15 psi at 100 degrees F.304 stainless steel, vertical, dished head, cone bottom.Serial # 164585-3.Previous use was for brewery fermentation.

MFR: Mueller Corp

https://images.aaronequipment.com/ItemImages/Mixers/Continuous-Mixer/Scott-Turbon-TSM42156_53183002_aa.jpg
View

Stock No.:

53183002

Unused Scott TSM42156 Twin-Shaft Continuous Mixer – 5 TPH Industrial Continuous Paddle Blender

Unused Scott TSM42156 Twin-Shaft Continuous Mixer 5 TPH Industrial Continuous Paddle Blender. 42" x 156" shaft dimensions. Designed for 33 lbs/cubic foot. Rated 5 tons/hour. 5 minute retention time. Carbon steel construction. 12" x 24" inlet, 12" x 36" discharge. 120 RPM blender speed. 20 HP shaft mount gear reducer. Driven by a 20 HP, 3/60/230-460V motor. Built 2021.

MFR: Scott Turbon

https://images.aaronequipment.com/ItemImages/Cooling-Towers/Cooling-Towers/Evapco-ATWB-4-3E9-Z_54391001_aa.jpg
View

Stock No.:

54391001

Used EVAPCO ATWB 4-3E9 Z Closed Circuit Cooling Tower – 42 Ton Process Fluid Cooler (2018)

Used- EVAPCO Process Cooling Tower, Model ATWB 4-3E9 Z. Approximately 42 Nominal Tons. 131 GPM flow rate. Closed Circuit. (2) 2 HP fans, approximate 18,110 CFM. 100 degrees F entering fluid temperature, 90 degrees F leaving fluid temp, 78 degrees F wet-bulb temperature. Stainless steel basin. Built 2018.

MFR: Evapco

https://images.aaronequipment.com/ItemImages/Coating-Pans/Coating-Pans/54039002_aa.jpg
View

Stock No.:

54039002

Used Spray Dynamics Spray Coating System – FastBack Feeder, Liquid & Dry Applicators, SS Mix Tanks, Built 2008

Used- Spray Dynamics Spray Coating System. Consisting of: Heat and Control Fast Back conveyor feeder, Model CV-FB200A15; Spray Dynamics Soft Flight stainless steel coating drum (42" D x 96" L) w/ Model MS-III liquid applicator; Uni-Spense dry ingredient dispensing system; Tank system w/ 150 gallon stainless steel mix tank w/ agitation and 200 gallon stainless steel single wall tank w/ agitation; Control panel. Built 2008. Previously used for cereal.

https://images.aaronequipment.com/ItemImages/Reactors/Glass-Lined-Reactors/11453437_aa.jpg
View

Stock No.:

11453437

Used R&M Italia 160L Glass Lined Reactor Train with 70L Receiver – 150 PSI – XP Agitator – Tycon Reglass – QVF System

Used- R & M 160 Liter Italia Glass Reactor Train with 160 Liter Glass Lined Reactor. Removable dish top, dish bottom, intermediate QVF glass mid section, rated 150 psi and full vacuum at +356/-112 F internal, jacketed for 150 psi and full vacuum at +356/-112 F, top mounted 1 hp, 230/460 volt, xp agitator drive, mechanical seal, 3 blade retreat curve agitator, tube baffle, 70 liter R & M Italia receiver, glass lined, removable dish top, dish bottom, internediated QVF glass mid section, rated 150 psi and full vacuum at 356 F internal, jacketed for 150 psi and full vacuum at 356 F, reactor and receiver bottom lift/lower mechanisms, reglass tycon reactor bottom serial# 1109, national board# 650, receiver serial# 8037, national board# 423, reactor reglassed by Tycon in 2005.

https://images.aaronequipment.com/ItemImages/Reactors/Glass-Lined-Reactors/11453438_aa.jpg
View

Stock No.:

11453438

Used R&M Italia 160L Glass Lined Reactor Train with 70L Receiver – 150 PSI – Jacketed – XP Agitator – QVF Sections

Used- 160 liter R & M Italia 160 liter glass lined reactor, removable dish top, dish bottom, intermediate QVF glass mid section, rated 150 psi and full vacuum at 356 F internal, jacketed for 150 psi and full vacuum at 356 F, top mounted 1 hp, 230/460 volt, xp agitator drive, mechanical seal, 3 blade retreat curve agitator, tube baffle, 70 liter R & M Italia receiver, glass lined, removable dish top, dish bottom, intermediated QVF glass mid section, rated 150 psi and full vacuum at 356 F internal, jacketed for 150 psi and full vacuum at 356 F, , reactor and receiver bottom lift/lower mechanisms, reactor serial# 8047, national board# 425, receiver serial# 8040, national board# 427

https://images.aaronequipment.com/ItemImages/Heat-Exchangers/Plate-Type/T13_54112001_aa.jpg
Submit Offer $3,950 View

Stock No.:

54112001

Used Thermaline T13 Plate Heat Exchanger – Stainless Steel, 975,672 BTU/Hr

Used- Thermaline Plate Heat Exchanger, Model T13, Stainless Steel. Approximately 42.9 square feet. Flow rate: 44 GPM (Process Side), 145 GPM (Service process). Heat exchanged 975,672 BTU/Hr. Designed temperature 150 psi at 300 degrees F. Gasket material EPDM, CLIP. (33) Plate material 0.6mm, 316 Stainless Steel, CDX. Frame material 304 stainless steel. Serial# 27423-21.

https://images.aaronequipment.com/ItemImages/Heat-Exchangers/Plate-Type/T13_54112002_aa.jpg
Submit Offer $3,950 View

Stock No.:

54112002

Stainless Steel Thermaline Plate Heat Exchanger, 44/145 GPM – Used T13 Model

Pre-Owned Thermaline Plate Heat Exchanger, Model T13, Stainless Steel. Approximately 42.9 square feet. Flow rate: 44 GPM (Process Side), 145 GPM (Service process). Heat exchanged 975,672 BTU/Hr. Designed temperature 150 psi at 300 degrees F. Gasket material EPDM, CLIP. (33) Plate material 0.6mm, 316 Stainless Steel, CDX. Frame material 304 stainless steel. Serial# 27423-22.

https://images.aaronequipment.com/ItemImages/Heat-Exchangers/Plate-Type/T13_54112003_aa.jpg
Submit Offer $3,950 View

Stock No.:

54112003

Used Thermaline Plate Heat Exchanger, Stainless steel.

Thermaline Model T13 Plate Heat Exchanger - Used, Stainless Steel. Approximately 42.9 square feet. Flow rate: 44 GPM (Process Side), 145 GPM (Service process). Heat exchanged 975,672 BTU/Hr. Designed temperature 150 psi at 300 degrees F. Gasket material EPDM, CLIP. (33) Plate material 0.6mm, 316 Stainless Steel, CDX. Frame material 304 stainless steel. Serial# 27423-23.

Recently reduced items

https://images.aaronequipment.com/ItemImages/Mixers/Paddle-Mixer/Paul-O-Abbe_52919007_aa.jpeg
Submit Offer $5,190 View

Stock No.:

52919007

Used Paul O Abbe Stainless Steel Fluidizer – 0.7 Cu Ft for Sale

Used- Paul O Abbe Fluidizer, Stainless Steel. Approximate 0.7 cubic feet, 20 liter. Non jacketed trough, 16" wide x 18-1/2" long x 18-1/2" deep. (2) 1-1/2" diameter x 15" long shafts, each have (14) 3" long x 3" wide x 1/8" thick paddles on 1/2" diameter posts. Driven by (2) .33hp, 3/60/230/460 volt, 1700rpm motors, through a reducer 8:1. Bottom bombay doors. 9-1/2" Diameter bottom discharge, 20" discharge height. Includes mounted control panel. Mounted on (4) casters. Serial# A45254.

MFR: Paul O Abbe

https://images.aaronequipment.com/ItemImages/Dryers-Drying-Equipment/Rotary-Hot-Air/Summerlot_52919005_aa.jpg
View

Stock No.:

52919005

Used Summerlot Engineered Products Dryer – 316 Stainless Steel

Used- Summerlot Engineered Products Dryer, 316 Stainless Steel. Cantilevered S/C. 12" long x 6" wide feed hopper, with a 3-3/4" diameter x 48" long screw, 3/4" pitch. Driven by a 1hp, 3/60/208-230/460 volt, 1755 rpm motor. Approximately 10" diameter x 136" long dryer vessel, with (4) fixed baffles. Driven by a 2hp, 3/60/230/460 volt, 1140 rpm motor through reducer, 5.76:1. Approximate 8" diameter discharge with a Flowseal valve. 36" Discharge height. Serial# 88211.

MFR: Summerlot

https://images.aaronequipment.com/ItemImages/Dryers-Drying-Equipment/Oven/PB-1542_50028005_aa.jpg
View

Stock No.:

50028005

Unused JBT Foodtech FORMCOOK Progrill Contact Cooker – Model PB-1542 Electric ProBake

Unused- JBT Foodtech FORMCOOK Progrill Contact Cooker. Model PB-1542 Electric ProBake. With 10 Degree Incline and Top Belt. Overall Belt Width 60". Usable Belt Width 59", Cooking Length 13.78'. Seven Lower Electric Platens, Upper and Lower Teflon Style Belting. Electrical Specifications 460/3/60 (110/1/60), Electric Drive, Basic Belt Cleaning System, Digital Read-out System, 12" Out-feed Conveyor, Standard Exhaust Fan. Controllogix Processor disconnects on all motors. HMI Screen A. Platens 3/60/460 / 1/60/110 Electric Drive.

https://images.aaronequipment.com/ItemImages/Pumps/Stainless-Centrifugal/APV-Crepaco-W20-20_53011006_aa.jpeg
Submit Offer $2,375 View

Stock No.:

53011006

High-Efficiency APV Crepaco W20/20 Pump – 105 GPM, 3500 RPM

High-Efficiency APV Crepaco W20/20 Pump 105 GPM, 3500 RPM. Approximate 105 gallons per minute, 95 head feet @ 3500 rpm. Approximate 2" inlet, 2" outlet. Driven by a 5hp, 3/60/230/460 volt, 3500 rpm motor. Serial# H-9296-95.

MFR: APV/Crepaco

Explore our guides.

Enhance your equipment knowledge with our resources.

April 7, 2026

Everything You Should Know Before Buying Used Cannabis Equipment

The cannabis industry has been booming, and with this growth comes the need for efficient and cost-effective manufacturing solutions.

Cannabis Industry Blog

April 7, 2026

Everything You Should Know Before Buying A Used Stainless Steel Tank

What do you need to know before buying a stainless-steel tank?

Tanks Blog

April 7, 2026

Everything You Should Know Before Buying A Used Roll Compactor

Industrial roll compactors play a vital role in material compaction across various industries.

Used Equipment Blog

Sell Equipment

Have surplus equipment? We offer flexible options including direct purchase, consignment, or listing on our marketplace — all backed by trusted professionals.

Learn about selling

Buy Used Equipment

Discover one of the world’s largest inventories of used processing and packaging equipment — ready to ship and backed by decades of industry expertise.

Browse all equipment

Auctions

Join global buyers and sellers at AIS-hosted auctions featuring top-quality surplus equipment from leading facilities around the world.

View current auctions