CALL 630-350-2200
View All Equipment Auctions OEM & New Equipment
Appraisals Equipment Reconditioning Asset Management Plant Liquidation Financing
Company Overview Meet Our Team Locations & Contact

Explore our extensive equipment marketplace

Discover a wide range of used processing and packaging machinery tailored to meet your industry needs. Use our advanced search features to find the perfect equipment quickly and efficiently.

Recently added products

https://images.aaronequipment.com/ItemImages/Heat-Exchangers/Shell-and-Tube-Stainless/10749156_aa.jpg
View

Stock No.:

10749156

Used Wuxi Chemical Equipment Shell & Tube Heat Exchanger, 234 Sq Ft, Duplex 2205, 2023

Used Wuxi Chemical Equipment 234 sq. ft. Horizontal Shell and Tube Heat Exchanger. Duplex 2205 stainless steel tubes rated 532 psi at 32 to 430 degrees F. 9' Tube length. 316L Stainless Steel shell rated 186.7 psi at 32 to 430 degrees F. 15'' Shell diameter. Carbon steel head. National Board # 531, Serial # WHA22-030-1, built 2023.

https://images.aaronequipment.com/ItemImages/Generators/Diesel-Fuel-and-Natural-Gas-Fuel/Cummins-235GFBC_53555002_aa.jpg
View

Stock No.:

53555002

Cummins Standby Natural Gas Generator, Model 235GFBC

Used Cummins Standby Natural Gas Generator, Model 235GFBC, rated at 235 kW and housed in a weather-protective enclosure. This generator is powered by a Cummins GTA855G3 natural gas engine, serial number 25303054, producing approximately 354 hp. Unit is configured for 3 phase, 60 Hz, 480 V operation at 1800 RPM and was built in 2005. The generator currently shows approximately 920 operating hours, making it a low-hour standby power unit well suited for dependable backup power applications.

MFR: Cummins

https://images.aaronequipment.com/ItemImages/Filters/Rotary-Disc-Filters/Prime-RFP24S_53696001_aa.jpg
View

Stock No.:

53696001

Industrial Rotary Fan Press – 24" Model RFP24S, Epoxy Coated, Pneumatic & Polymer System

Unused- Prime Solution 24" Rotary Fan Press, Model RFP24S. 304 stainless steel filter plates and support rotor; Epoxy coated carbon steel housings, base, and moveable dewatering platform (on adjustable V-track casters); In-line full port pneumatic mixer w/ 4-port injection ring; PVC sludge retention manifold with clear site tube cleanout; pneumatic sludge by-pass control valve; sludge feed magnetic flow meter; Rotary lobe sludge pump; Air compressor with receiver; Emulsion polymer feed/blend system with integrated controls; 1.5 HP direct gear drive system. Includes touch screen control panel, 3/60/575V. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Prime

https://images.aaronequipment.com/ItemImages/Dryers-Drying-Equipment/Hollowscrew/S-Howes-24U24-JS_53912001_aa.jpg
View

Stock No.:

53912001

Stainless Steel 24” U-Trough Screw Conveyor with Thermal Heating & Cooling

Used- S. Howes U-Trough Thermal Processing Screw Conveyor, Model 24U24-JS. 24" diameter screw, 24' Long inside dimension. Oversized 16" diameter shaft pipe, Journals thru-bored to allow heating fluid flow through shaft. 22' Overall jacket length; 14.9 psig design pressure. Designed for thermal fluid heating/cooling media or low pressure steam. 316 stainless steel construction in product contact and jacket areas. 3" inlet/outlet on main body; 1" on heated/cooling screw. Fulton control panel 120-VAC, 1-Phase, 60HZ with 6 digital PID temperature controllers. 3 x 3" pneumatic valves for inlet fluid control on main body of screw conveyor. 1 x 1" pneumatic valve for inlet fluid control on screw. 10 x 3" manual gate valves for support plumbing, Sectional covers. Driven by a 15 hp, 3/60/460V motor. Machine # 117390, New in 2012. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: S Howes

https://images.aaronequipment.com/ItemImages/Screeners-Sifters/Circular-Screeners/Kason-K-24-2-SS-P_54209003_aa.jpg
Submit Offer $4,500 View

Stock No.:

54209003

Used Kason 24" Portable Stainless Steel Screener | Model K-24-2-SS-P | 1/3 HP Motor | Includes Decks, Rings & Screens

Used Kason 24" Portable Stainless Steel Screener, Model K-24-2-SS-P, 1/3 HP Motor. Includes Decks, Rings & Screens. Driven by a 1/3hp, 3/60/460 volt, 1140rpm motor. Mounted on carbon steel cart with casters. Serial# KC-1045.

MFR: Kason

https://images.aaronequipment.com/ItemImages/Dryers-Drying-Equipment/Hollowscrew/Denver-D24-24-6_54447001_aa.jpeg
View

Stock No.:

54447001

Denver Sala Holo-Flite Dryer D24-24-6 | Refurbished Indirect Thermal Sludge Dryer System

Fully Refurbished Denver Sala Holo-Flite Dryer, Model D24-24-6. Indirect thermal sludge drying processor with dual holo-flite screws and vapor dome. Fully refurbished with new components. 316 Stainless Steel contact surfaces. (2) Screws 24'' diameter x 24' long, rated for 150 psi at 650 degrees F. Non-contact carbon steel exterior trough jacket rated 30 psi at 650 degrees F, Hot Oil or Water/Glycol heating medium. 10 HP Baldor motor. Contains Sumitomo Cyclo 6000 gearbox. Tomaso Built process control system provides fully automated operation of the Denver-Sala D24-24-6 dryer, ensuring consistent product quality, maximum throughput, and equipment protection across variable feed conditions; Product Temperature Protection, Residence Time Control, Feed Interlock System, Dynamic Safety Overrides, Vapor & Pressure Control, Mechanical Protection, Thermal Oil Control, Recipe-Based Operation, CIP Mode, HMI Interface. Fully refurbished 12/23/2025.

MFR: Denver

https://images.aaronequipment.com/ItemImages/Feeders/Vibratory/Carrier-FC2410051-4304_71239_a.jpg
Submit Offer $4,250 View

Stock No.:

71239

Used Carrier Ampli-Flow Vibrating Feeder – Model FC2410051/4304, Stainless Steel

Used- Carrier Vibrating Equipment Ampli-Flow Vibrating Feeder, Model FC2410051/4304, Stainless Steel. 24" wide x 72" long, single deck with scalper type insert. Driven by an approximate 1 hp motor.

MFR: Carrier

https://images.aaronequipment.com/ItemImages/Screeners-Sifters/Circular-Screeners/Sweco-SS24Y44A3P_10151591_aa.jpg
View

Stock No.:

10151591

Used Sweco SS24Y44A3P3WCXB Stainless Steel Vibratory Screener – 24" Single Deck Separator

Used- Sweco Stainless Steel Screener, Model SS24Y44A3P3WCXB. 24" diameter. Single deck, 2 separation. (2) 6" diameter outlets. Driven by 1/3 hp motor, 1145 rpm, 460V. Serial# 953894-A08/10. Mounted on stand.

MFR: Sweco

https://images.aaronequipment.com/ItemImages/Filters/Rotary-Vacuum-Filters/Alar-Engineering_13527030_aa.jpg
View

Stock No.:

13527030

Used Alar Auto-Vac Rotary Vacuum Drum Filter System – 2' x 2', Model 220

Used- 2' x 2' Alar "Auto-Vac" Rotary Vacuum Drum Filter System. Drum measures 2' diameter x 2' long. Model Auto-Vac 220. Carbon steel drum. With motorized advancing knife discharge. On base with poly tank and .3 HP Lightnin Agitator drive, shaft and prop, 5 HP Atlantic Fluidics Vacuum Pump and receiver pump. Filter agitator with .3 HP drive. .5 HP drum drive gear reduced, chain driven with guard. Unit looks to be in good condition.

MFR: Alar Engineering

https://images.aaronequipment.com/ItemImages/Plastics-Equipment/Sheet-Extrusion-Lines/D9060_40425041_aa.jpg
View

Stock No.:

40425041

Complete Sheeting Line – 24" Cooling Stack, Puller Cutter, Trim Press & Heater

Used- 24" Vinyletech Abbottstown Sheeting Cooling Stack, Model D9060. Approximately 24" wide x 12" diameter cooling drum, with 21" wide x 12" diameter mating drum, 24" wide x 8" diameter idler drum, serial# 22654, Vinyletech serial# 06181. includes Abbottstown puller cutter combo, model D9051, serial# 22952, Abbottstown trim press, model D8652, serial# 22657, 36 kw Compaheat heating system, model TC4-9-4P4 zone, 9 kw per zone, 208-230 volt, serial# 23010, 75 kva transformer.

https://images.aaronequipment.com/ItemImages/Coating-Pans/Coating-Pans/Thomas-Engineering-24-111_48558004_aa.jpg
View

Stock No.:

48558004

Used Thomas Engineering Accela-Cota Coating Pan – Model 24-111, Stainless Steel

Used- Thomas Engineering Coating Pan, Model "Accela-Cota" 24-111, Stainless Steel. Approximate working capacity of 40 pounds. Serial # 24-328.

MFR: Thomas Engineering

https://images.aaronequipment.com/ItemImages/Coating-Pans/Coating-Pans/Vector-Freund-Hi-Coater_47453001_aa.jpg
View

Stock No.:

47453001

Used Vector Freund Hi-Coater Coating Pan – Stainless Steel, 24" Diameter

Used- Vector Freund Hi-Coater Coating Pan. Stainless Steel coating chamber approximate 24" diameter x 16" deep with internal baffles. Unit includes blowers and control panel. New York Blower, Shop # C-5206-110, size 2104A05, driven by 5 hp, 3/60/230/460 volt, 3470 RPM motor, 3.5" diameter inlet, 3" outlet. Requires spray gun. Previously used in pharmaceutical application.

MFR: Vector/Freund

Recently reduced items

https://images.aaronequipment.com/ItemImages/Mixers/Paddle-Mixer/Paul-O-Abbe_52919007_aa.jpeg
Submit Offer $5,190 View

Stock No.:

52919007

Used Paul O Abbe Stainless Steel Fluidizer – 0.7 Cu Ft for Sale

Used- Paul O Abbe Fluidizer, Stainless Steel. Approximate 0.7 cubic feet, 20 liter. Non jacketed trough, 16" wide x 18-1/2" long x 18-1/2" deep. (2) 1-1/2" diameter x 15" long shafts, each have (14) 3" long x 3" wide x 1/8" thick paddles on 1/2" diameter posts. Driven by (2) .33hp, 3/60/230/460 volt, 1700rpm motors, through a reducer 8:1. Bottom bombay doors. 9-1/2" Diameter bottom discharge, 20" discharge height. Includes mounted control panel. Mounted on (4) casters. Serial# A45254.

MFR: Paul O Abbe

https://images.aaronequipment.com/ItemImages/Dryers-Drying-Equipment/Rotary-Hot-Air/Summerlot_52919005_aa.jpg
View

Stock No.:

52919005

Used Summerlot Engineered Products Dryer – 316 Stainless Steel

Used- Summerlot Engineered Products Dryer, 316 Stainless Steel. Cantilevered S/C. 12" long x 6" wide feed hopper, with a 3-3/4" diameter x 48" long screw, 3/4" pitch. Driven by a 1hp, 3/60/208-230/460 volt, 1755 rpm motor. Approximately 10" diameter x 136" long dryer vessel, with (4) fixed baffles. Driven by a 2hp, 3/60/230/460 volt, 1140 rpm motor through reducer, 5.76:1. Approximate 8" diameter discharge with a Flowseal valve. 36" Discharge height. Serial# 88211.

MFR: Summerlot

https://images.aaronequipment.com/ItemImages/Tanks/Stainless-1000-4999-Gal/Vendome-Copper-and-Brass_10128097_aa.jpg
View

Stock No.:

10128097

1,000 gallon Vendome stainless steel processor with dual agitation.

1,000 gallon Vendome stainless steel processor with dual agitation. The bottom and the sides are jacketed. The dimple jackets are rated at 100 psi @ 338F. This unit is equipped with side scrape agitation (5 hp) and a 50 hp top entering homogenizing mixer. 230/460 vac 3 ph electric power required. There is one adjustable baffel inside. The vessel is 72" diameter x 60" straight side with a dished top and bottom. Bottom jacket nozzles are two- 2" RFSO flanges. Side jacket has four-2" RFSO flanges as in/out flanges. Bottom has one 3"tri-clamp nozzle. Top has one- 18" hinged lid manway, one 6" x 18" rectangular inlet, one 6" tri-clamp nozzle, one- 4" sightglass, three-3" nozzles, five- 2" nozzles, and one 1" nozzle. This unit stands on 4 stainless steel pipe legs. National board #299. The skin over the jacket has some dents and repairs. The jackets passed our hydro tests. Built in March 2004.

MFR: Vendome Copper & Brass

https://images.aaronequipment.com/ItemImages/Dryers-Drying-Equipment/Oven/PB-1542_50028005_aa.jpg
View

Stock No.:

50028005

Unused JBT Foodtech FORMCOOK Progrill Contact Cooker – Model PB-1542 Electric ProBake

Unused- JBT Foodtech FORMCOOK Progrill Contact Cooker. Model PB-1542 Electric ProBake. With 10 Degree Incline and Top Belt. Overall Belt Width 60". Usable Belt Width 59", Cooking Length 13.78'. Seven Lower Electric Platens, Upper and Lower Teflon Style Belting. Electrical Specifications 460/3/60 (110/1/60), Electric Drive, Basic Belt Cleaning System, Digital Read-out System, 12" Out-feed Conveyor, Standard Exhaust Fan. Controllogix Processor disconnects on all motors. HMI Screen A. Platens 3/60/460 / 1/60/110 Electric Drive.

Explore our guides.

Enhance your equipment knowledge with our resources.

April 7, 2026

Everything You Should Know Before Buying Used Cannabis Equipment

The cannabis industry has been booming, and with this growth comes the need for efficient and cost-effective manufacturing solutions.

Cannabis Industry Blog

April 7, 2026

Everything You Should Know Before Buying A Used Stainless Steel Tank

What do you need to know before buying a stainless-steel tank?

Tanks Blog

April 7, 2026

Everything You Should Know Before Buying A Used Roll Compactor

Industrial roll compactors play a vital role in material compaction across various industries.

Used Equipment Blog

Sell Equipment

Have surplus equipment? We offer flexible options including direct purchase, consignment, or listing on our marketplace — all backed by trusted professionals.

Learn about selling

Buy Used Equipment

Discover one of the world’s largest inventories of used processing and packaging equipment — ready to ship and backed by decades of industry expertise.

Browse all equipment

Auctions

Join global buyers and sellers at AIS-hosted auctions featuring top-quality surplus equipment from leading facilities around the world.

View current auctions