CALL 630-350-2200
View All Equipment Auctions OEM & New Equipment
Appraisals Equipment Reconditioning Asset Management Plant Liquidation Financing
Company Overview Meet Our Team Locations & Contact

Explore our extensive equipment marketplace

Discover a wide range of used processing and packaging machinery tailored to meet your industry needs. Use our advanced search features to find the perfect equipment quickly and efficiently.

Recently added products

https://images.aaronequipment.com/ItemImages/Heat-Exchangers/Shell-and-Tube-Carbon/Fabsco_10749159_aa.jpg
View

Stock No.:

10749159

Fabsco Shell and Tube Heat Exchanger, 299 Square Foot

Used Fabsco Shell and Tube Heat Exchanger, 299 Square Foot. Carbon steel tubes rated 405 psi at 32 to 330 degrees F. 13' Tube length. Carbon steel head. Carbon steel shell rated 405 psi at 5 to 300 degrees F. 15'' Shell diameter. National Board # 11282, Serial # S21-13258-9, built 2023.

MFR: Fabsco

https://images.aaronequipment.com/ItemImages/Mills/FitzMill/Fitzpatrick-D_10211226_aa.jpg
View

Stock No.:

10211226

Used Fitzpatrick Fitzmill Model D Comminuting Machine – 3 HP, Stainless Contact, Gravity Fed

Used- Fitzpatrick Fitzmill Comminuting Machine, Model D. Stainless steel material in contact with product. 3HP. Unit is gravity fed with slanted inlet throat with an opening of 4.75"H X 5.75"W. 6" wide milling chamber with a 10" diameter rotor. Mill Rotor: 16 pivoting blades, plain bars 1" wide X 0.25" thick. Bottom discharge hopper with 7.75" flange, 42.25" above base elevation. Portable carbon steel stand with a base area of 42" X 46". 3HP two-speed v-belt drive, 1750 RPM TEFC motor. Supply power: 115/230V, 60Hz, single phase AC. Bottom sizing screens not included.

MFR: Fitzpatrick

https://images.aaronequipment.com/ItemImages/Plastics-Equipment/Extruders-Single-Screw-Extruder/Buss_10151571_aa.jpg
View

Stock No.:

10151571

Used 100mm Buss Kneader System with Hot Feed Extruder & Gala Underwater Pelletizer | 200 HP | 2,000 lb/hr PVC Line

Used 100mm Buss Kneader System with Hot Feed Extruder & Gala Underwater Pelletizer | 200 HP | 2,000 lb/hr PVC Line, includes 5.94/1 gearbox, jacketed barrel and clam shell barrel opening. Includes operator control panel. Kneader will discharge into approximately 5.5" o.d. (140mm) hot feed extruder with 7/1 L/D, jacketed barrel driven by 75 hp motor. Includes Used #6 Gala underwater pelletizer with 12.1 ECLNBF Gtala spin dryer. Extra new die plates available at additional cost. The Buss line was last run on flexible PVC at 2000 lb/hr in August 2022.

MFR: Buss

https://images.aaronequipment.com/ItemImages/Valves/Valves/Crepaco-761-Series_45053468_aa.jpg
View

Stock No.:

45053468

Unused Alfa Laval Tri-Clover 3" 316L Stainless Y Body Shut-Off Valves

Unused Tri-Clover (Alfa Laval) "Y" Body Shut-Off Valves, Model 761-90M-29L-3-316L-34-4-3, Lot of 4. 316L Stainless steel. Molded rubber seat. 3" Port size. Air-Actuated. New in box. (Quantity of 4).

MFR: Crepaco

https://images.aaronequipment.com/ItemImages/Plastics-Equipment/Hopper-Blending-Feeding-Equipment/Novatec-MCS-206_43752066_aa.jpg
Submit Offer $2,500 View

Stock No.:

43752066

Used Novatech MCS-206 3-Component Blending System – Pneumatic Pump, 3 HP, Controls

Used- Novatech 3 Component Blending System, Model MCS-206. Consisting of: (1) Novatec pneumatic pump, Model UPU, driven by a 3 hp motor with filter, and multi-station panel, Serial # 12-343-0842. Includes receivers, and controls, Serial # 12-243-0177. Last used with a 2.5" extrusion line.

MFR: Novatec

https://images.aaronequipment.com/ItemImages/Mills/Mills-Others/Sturtevant-2-10_48417002_aa.jpg
Submit Offer $4,650 View

Stock No.:

48417002

Used Sturtevant Sample Grinder – Model 2-10, 100-400 lbs/hr Capacity, Carbon Steel

Used- Sturtevant Sample Grinder, Model 2-10, Carbon Steel. Approximate capacity 100 to 400 pounds per hour, product size 20 to 100 mesh. (1) 10" diameter grinding disc, driven by a 3 hp, 3/60/208-230/460 volt, 1750 rpm motor. Hinged door with (1) 10" diameter stationary grinding disc. Approximate top inlet 6-1/4" x 2-1/4", bottom outlet 6-3/4" x 4-3/8". Mounted on a carbon steel frame. Serial #1170.

MFR: Sturtevant

https://images.aaronequipment.com/ItemImages/Mixers/Disperser-Mixer/Scott-Turbon-1XEV-1_50510001_aa.jpg
Submit Offer $4,513 View

Stock No.:

50510001

Used Scott Turbon 1XEV-1 Mixer & Lee Industries 1-Gallon Reactor – 3 HP, Stainless Steel

Used- Scott Turbon Mixer, Model 1XEV-1, Stainless Steel. Approximate 9-3/4" long mixing shaft. Driven by a 3 hp, 3/60/230/460 volt, 3500 rpm motor. Air operated raise. Includes Lee Industries Reactor, Approximate 1 Gallon (4 Liters), Model 4LDBT. Internal 316L Stainless steel rated 45 psi at -20 to 325 degrees F, vacuum designed. 304 Stainless steel jacket rated 50 psi at -20 to 325 degrees F. Dished top head with 3" tri-clamp openings (missing clamp), (5) 3/4", (5) Bolts missing off top head. Vessel openings side: 1-1/2", 3/4", bottom: 1-1/2" with valve. Reactor Serial # C5087C. Built 1997. Includes control panel with A/B controller. Mounted on stainless steel frame with casters. Serial # 4060-1A.

MFR: Scott Turbon

https://images.aaronequipment.com/ItemImages/Mills/Jar-Mill/Paul-O-Abbe-JBM_52710004_aa.jpg
Submit Offer $6,950 View

Stock No.:

52710004

Pre-Owned Paul O Abbe Jar Rolling Mill – 3” x 60” Rolls, 86-258 RPM

Used- Paul O Abbe Single Tier Jar Rolling Mill Enclosure, Model JRM. 3" Diameter x 60" wide rolls. Roll speed: 86 to 258 rpm, set rolls at 169 rpm. Approximate 3/4hp, 3/60/230/460 volt, motor. Sound attenuated enclosure. Mounted on fork-liftable base. Serial# A35796. Capable of being two-tier. ***THIS MACHINE IS OFFERED FOR RENTAL. ASK AN AARON EQUIPMENT PROFESSIONAL FOR MORE INFORMATION***

MFR: Paul O Abbe

https://images.aaronequipment.com/ItemImages/Mixers/Disperser-Mixer/Ross-Industries-HSD-3_54425002_ae.jpg
View

Stock No.:

54425002

Used Charles Ross HSD-3 High Speed Disperser 3 Gallon Lab Mixer

Used Charles Ross & Son High Speed Disperser, Model HSD-3. Designed for laboratory and pilot-scale mixing and dispersion. Approximate 3-gallon working capacity, vertical shaft batch type, handling viscosities up to approximately 50,000 cP. 5-1/4" Diameter disperser blade. Driven by approximately 3 HP inverter-duty TEFC motor, 230/460V, 3 phase, 50/60 Hz, with variable speed drive. Wetted parts are 304 stainless steel with painted carbon steel frame and V-belt drive. Features air/oil hydraulic lift with adjustable head. Bench or floor mounted, open vessel design. Suitable for paints, coatings, inks, adhesives, and chemical applications.

MFR: Ross Industries

https://images.aaronequipment.com/ItemImages/Plastics-Equipment/Extruders-Single-Screw-Extruder/Welex-HS-30-40D_54129004_aa.jpg
View

Stock No.:

54129004

Used Welex HS 3.0 40D SV Single Screw Extruder | 3" Screw | 40:1 L/D | 1520 RPM | 550 HP VFD Drive | Vented Barrel

Used Welex HS 3.0 40D SV Single Screw Extruder | 3" Screw | 40:1 L/D | 1520 RPM | 550 HP VFD Drive | Vented Barrel. 1520 RPM max. screw speed. Electric heated, air cooled barrel. Vented barrel. 57" barrel center line. 3" x 9" oversized water cooled feed throat. Touch screen operator control. Direct driven by a 412kW (approx. 550 HP) variable frequency motor, 3/60/480V. Serial# 8454. Built 2009.

MFR: Welex

https://images.aaronequipment.com/ItemImages/Mixers/Double-Cone-V-Mixers/Patterson-Kelley-3-Cu-Ft_54228003_aa.jpg
View

Stock No.:

54228003

Used Patterson Kelley 3 Cu. Ft. Twin Shell Dry V-Blender – Stainless Steel

Used Patterson Kelley 3 Cubic Foot Twin Shell Dry V-Blender, Stainless Steel. 3 cubic foot capacity. Max material density 70 lbs./cubic foot. Top charge ports with covers. 16" diameter x 26" long vessel sections. 6" Diameter center bottom outlet with 41" discharge height. Driven by a 3/4hp, 3phase 50/60 hz, 208-220/440 volt, 1725/1425rpm motor. Mounted on painted carbon steel frame. Serial# 147566.

MFR: Patterson Kelley

https://images.aaronequipment.com/ItemImages/Heat-Exchangers/Shell-and-Tube-Stainless/Ketema-MVHT-1-A-S_50467039_aa.jpg
Submit Offer $1,500 View

Stock No.:

50467039

Buy Used Ketema Shell & Tube Heat Exchanger – 3.2 Sq. Ft., High-Pressure Rated

Used- Ketema Shell & Tube Heat Exchanger, 3.2 Square Feet, Type MVHT-1-A-SS. (28) .375" diameter x 14" long 316 stainless steel tubes rated 300 psi and full vacuum at 650 degrees F. Carbon steel shell rated 150 psi at 400 degrees F. Size 4-Y-14. 1.5" tubes inlet/outlets, 1" shell inlet/outlets. Serial # WL-950429/2.

MFR: Ketema

Recently reduced items

https://images.aaronequipment.com/ItemImages/Mixers/Paddle-Mixer/Paul-O-Abbe_52919007_aa.jpeg
Submit Offer $5,190 View

Stock No.:

52919007

Used Paul O Abbe Stainless Steel Fluidizer – 0.7 Cu Ft for Sale

Used- Paul O Abbe Fluidizer, Stainless Steel. Approximate 0.7 cubic feet, 20 liter. Non jacketed trough, 16" wide x 18-1/2" long x 18-1/2" deep. (2) 1-1/2" diameter x 15" long shafts, each have (14) 3" long x 3" wide x 1/8" thick paddles on 1/2" diameter posts. Driven by (2) .33hp, 3/60/230/460 volt, 1700rpm motors, through a reducer 8:1. Bottom bombay doors. 9-1/2" Diameter bottom discharge, 20" discharge height. Includes mounted control panel. Mounted on (4) casters. Serial# A45254.

MFR: Paul O Abbe

https://images.aaronequipment.com/ItemImages/Dryers-Drying-Equipment/Rotary-Hot-Air/Summerlot_52919005_aa.jpg
View

Stock No.:

52919005

Used Summerlot Engineered Products Dryer – 316 Stainless Steel

Used- Summerlot Engineered Products Dryer, 316 Stainless Steel. Cantilevered S/C. 12" long x 6" wide feed hopper, with a 3-3/4" diameter x 48" long screw, 3/4" pitch. Driven by a 1hp, 3/60/208-230/460 volt, 1755 rpm motor. Approximately 10" diameter x 136" long dryer vessel, with (4) fixed baffles. Driven by a 2hp, 3/60/230/460 volt, 1140 rpm motor through reducer, 5.76:1. Approximate 8" diameter discharge with a Flowseal valve. 36" Discharge height. Serial# 88211.

MFR: Summerlot

https://images.aaronequipment.com/ItemImages/Tanks/Stainless-1000-4999-Gal/Vendome-Copper-and-Brass_10128097_aa.jpg
View

Stock No.:

10128097

1,000 gallon Vendome stainless steel processor with dual agitation.

1,000 gallon Vendome stainless steel processor with dual agitation. The bottom and the sides are jacketed. The dimple jackets are rated at 100 psi @ 338F. This unit is equipped with side scrape agitation (5 hp) and a 50 hp top entering homogenizing mixer. 230/460 vac 3 ph electric power required. There is one adjustable baffel inside. The vessel is 72" diameter x 60" straight side with a dished top and bottom. Bottom jacket nozzles are two- 2" RFSO flanges. Side jacket has four-2" RFSO flanges as in/out flanges. Bottom has one 3"tri-clamp nozzle. Top has one- 18" hinged lid manway, one 6" x 18" rectangular inlet, one 6" tri-clamp nozzle, one- 4" sightglass, three-3" nozzles, five- 2" nozzles, and one 1" nozzle. This unit stands on 4 stainless steel pipe legs. National board #299. The skin over the jacket has some dents and repairs. The jackets passed our hydro tests. Built in March 2004.

MFR: Vendome Copper & Brass

https://images.aaronequipment.com/ItemImages/Dryers-Drying-Equipment/Oven/PB-1542_50028005_aa.jpg
View

Stock No.:

50028005

Unused JBT Foodtech FORMCOOK Progrill Contact Cooker – Model PB-1542 Electric ProBake

Unused- JBT Foodtech FORMCOOK Progrill Contact Cooker. Model PB-1542 Electric ProBake. With 10 Degree Incline and Top Belt. Overall Belt Width 60". Usable Belt Width 59", Cooking Length 13.78'. Seven Lower Electric Platens, Upper and Lower Teflon Style Belting. Electrical Specifications 460/3/60 (110/1/60), Electric Drive, Basic Belt Cleaning System, Digital Read-out System, 12" Out-feed Conveyor, Standard Exhaust Fan. Controllogix Processor disconnects on all motors. HMI Screen A. Platens 3/60/460 / 1/60/110 Electric Drive.

Explore our guides.

Enhance your equipment knowledge with our resources.

April 7, 2026

Everything You Should Know Before Buying Used Cannabis Equipment

The cannabis industry has been booming, and with this growth comes the need for efficient and cost-effective manufacturing solutions.

Cannabis Industry Blog

April 7, 2026

Everything You Should Know Before Buying A Used Stainless Steel Tank

What do you need to know before buying a stainless-steel tank?

Tanks Blog

April 7, 2026

Everything You Should Know Before Buying A Used Roll Compactor

Industrial roll compactors play a vital role in material compaction across various industries.

Used Equipment Blog

Sell Equipment

Have surplus equipment? We offer flexible options including direct purchase, consignment, or listing on our marketplace — all backed by trusted professionals.

Learn about selling

Buy Used Equipment

Discover one of the world’s largest inventories of used processing and packaging equipment — ready to ship and backed by decades of industry expertise.

Browse all equipment

Auctions

Join global buyers and sellers at AIS-hosted auctions featuring top-quality surplus equipment from leading facilities around the world.

View current auctions