CALL 630-350-2200
View All Equipment Auctions OEM & New Equipment
Appraisals Equipment Reconditioning Asset Management Plant Liquidation Financing
Company Overview Meet Our Team Locations & Contact

Explore our extensive equipment marketplace

Discover a wide range of used processing and packaging machinery tailored to meet your industry needs. Use our advanced search features to find the perfect equipment quickly and efficiently.

Recently added products

https://images.aaronequipment.com/ItemImages/Tanks/Stainless-0-499-Gal/JBT-Foodtech_54573003_ae.jpg
View

Stock No.:

54573003

Unused JBF 360 Gallon Stainless Steel Dual-Drive Jacketed Kettle, 316L stainless steel product contact, ASME U-stamped insulated jacket rated 100 PSI at 300F, approximately 360-gallon capacity, dish top with cone bottom, top-mounted hinged manway, dual-drive agitation system with 7.5 HP motor and gear reducers, single shaft with dual 3-blade turbine impellers, side sweep, bottom sweep, and angled kicker blade for high-efficiency mixing, 3-inch bottom center discharge, 230/460V, 60 Hz, 3-phase. Suitable for food, pharmaceutical, cosmetic, and chemical processing requiring heating, cooling, blending, and high-viscosity mixing.

MFR: JBT Foodtech

https://images.aaronequipment.com/ItemImages/Dryers-Drying-Equipment/Double-Cone-V-Rotary-Vacuum/Paul-O-Abbe-108-RCVD_53959001_aa.jpg
View

Stock No.:

53959001

Used Paul O Abbe Rota-Cone Vacuum Dryer, 240 Cu Ft Capacity – Model 108 RCVD, Stainless Steel, Fully Refurbished

Used- Paul O Abbe Rota-Cone Vacuum Dryer, Model 108 RCVD. 304 stainless steel. 240 cubic feet working capacity, 365 cubic feet total capacity. #4 Polished internal 108 diameter, rated 30 psi at 500 deg F to full vacuum. Carbon steel jacket rated 40 psi at 500 deg F coincident with full vacuum on internal. 20" diameter top port with cover, 12" center bottom outlet. Driven by a 10 hp, 3/60/230/460 volt gear motor with brake, ratio 82.6 to 1. Approximate 4 rpm cone. Mounted on carbon steel stands. Includes Wintek Vacuum Pump Skid, Mokon Chiller and Mokon hot water circulating unit. 2016 refurbishment included: General clean up; New Vacuum Line; New Oil Feed Box; New Drive & Idler Side Bearings; New Gear Wheel; New Spray Line; New Pinion Gear; New Gear Guard; New Valve w/ Gear Wheel Operator; New Gearmotor w/ Brake; Polished product contact areas to 180 Grit. 260" L x 120" W x 170" H. Approx. 18,000 lbs.

MFR: Paul O Abbe

https://images.aaronequipment.com/ItemImages/Mixers/Ribbon-Blenders/Precision-Stainless-300-Gal-37-cu-ft_54244001_aa.png
View

Stock No.:

54244001

Used Precision Stainless 37 Cu Ft (300 Gallon) Jacketed Double Ribbon Blender | 150 PSI Jacket | 5 HP Drive | Bottom Knife-Gate Discharge

Used Precision Stainless 37 Cu Ft (300 Gallon) Jacketed Double Ribbon Blender | 150 PSI Jacket | 5 HP Drive | Bottom Knife-Gate Discharge. Heavy-duty U-shaped trough with dual-ribbon agitator for fast, uniform blending, Jacket rated to 150PSI @ 400 Deg F. Drive Motor: 5 HP, 460/230V, 5 EW-EURO DRIVE, 3- phase AC motor, 480V, Iron Horse ACN, VFD Bottom discharge with knife-gate valve for efficient product release Polished interior finish for easy cleaning and sanitary operation Ideal for food, chemical, pharmaceutical, or cosmetic powder applications Dimensions: 8 L x 43" W x 58"H Weight (lb.): 3,200 lbs

MFR: Precision Stainless

https://images.aaronequipment.com/ItemImages/Filters/Horizontal-Belt-Vacuum/Pannevis-RT_88940_aa.jpg
View

Stock No.:

88940

Industrial Vacuum Belt Filter - Pannevis RT, 316 SS & Polypropylene

Used- Pannevis Horizontal Vacuum Belt Filter, Type RT, 316 Stainless Steel/Polypropylene Construction. Approximate 5.3 square meter filtration area. Filter 960 x 5600mm. Vacuum tray. Driven by a .75 kw, 3/50/380 volt varispeed motor. Mounted on a carbon steel frame. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Pannevis

https://images.aaronequipment.com/ItemImages/Tanks/Stainless-1000-4999-Gal/Feldmeier_50800019_aa.jpg
View

Stock No.:

50800019

Used Feldmeier 3,700 Gallon Vertical Single Wall Mix Tank.

Used- Feldmeier 3,700 Gallon Vertical Single Wall Mix Tank. 316L stainless steel. Cone bottom. Tank height is 19'6". Sidewall is dented. Ladder is with the tank, no safety cage.

MFR: Feldmeier

https://images.aaronequipment.com/ItemImages/Silos/Silos/Peabody_49997003_aa.jpg
View

Stock No.:

49997003

Used Peabody TecTank Lime Silo – 3704 Cu. Ft. Carbon Steel Storage Silo

Used- Peabody TecTank Lime Silo. 3704 cu. ft. tank volume. 11' 11" diameter x 44' tall. Carbon steel construction. welded; Cone bottom; Rotary airlock valve; Slide gate; Bin vent. Mounted on (4) carbon steel legs.

MFR: Peabody

https://images.aaronequipment.com/ItemImages/Mixers/Ribbon-Blenders/Paul-O-Abbe-RB-375_10715053_aa.jpg
View

Stock No.:

10715053

In STOCK AND New- Paul O. Abbe, Model RB-375 Ribbon Blender

NEW & IN STOCK- Paul O. Abbe, Model RB-375 Ribbon Blender.In -Stock . 375 Cubic Foot working capacity. 441 Cubic Foot total volume. Type 304 stainless steel polished. Food grade. All stainless steel construction. Trough dimensions: Approximately 67.7" wide x 157.5" long x 78.8" deep. Internal double spiral ribbon. Packing glands and pillow block bearings. 75 hp SEW Euro drive hollow bore design. 230/460 volt, 1775 rpm, 3/60 with approximately output 20 rpm. Top cover with hold down clamps and limit switch. Center Loading cover with welded safety grate, 30" wide x 50" long. Approximate 5.5" wide x 27.6" flush air operated plug valve. Discharge housing is approximate 20.5" wide x 36.2" long. Approximately 4" discharge height. Approximate weight 20,944 pounds. Approximate overall dimensions: 91.9" wide x 237.1" long x 104.7" high. Controls are available upon request.

MFR: Paul O Abbe

https://images.aaronequipment.com/ItemImages/Tanks/Stainless-1000-4999-Gal/54154001_ac.jpg
View

Stock No.:

54154001

Used – 3,800 Gallon Stainless Steel Vertical Storage Tank – 316 SS, Flat Top, Di

Used- Stainless Steel Vertical Storage Tank, Approximately 3800 Gallon Capacity, 316 Stainless Steel. Flat top, Dish bottom. Approximately 94" diameter x 128" straight side. Openings Top" (3) 2" 23" x 23" manway with cover. 2" Center bottom outlet, approximate 9" discharge height. Mounted on (4) Carbon steel legs.

https://images.aaronequipment.com/ItemImages/Dryers-Drying-Equipment/Spray-Dryer/MDL-050CM_54393001_aa.jpeg
View

Stock No.:

54393001

Unused GF Corporation MDL-050CM Micro Mist Spray Dryer – 3 kg/h Stainless Steel Lab Spray Drying System (2021)

Unused GF Corporation Micro Mist Spray Dryer, Model MDL-050CM. Stainless steel construction. 3kg/h (6.6 lbs/hour) evaporation capacity (inlet 200 degrees C/392 degrees F, outlet 60 degrees C/140 degrees F). Approx. 39" diameter X 40" straight side drying chamber. Four-fluid nozzle. Co-current air flow pattern. Cyclone and filter bag collection. 50ml/min liquid feed pump. Touch screen controls. 5kW heater. 3ph/200V. Built 2021.

https://images.aaronequipment.com/ItemImages/Heat-Exchangers/Shell-and-Tube-Stainless/Kennedy_13140018_a.jpg
View

Stock No.:

13140018

Used Approximately 3900 Square Foot Kennedy Tank & Manufacturing Co Heat Exchanger

Used- Kennedy Tank & Manufacturing Co Horizontal Heat Exchanger. 304 Stainless shell and tube side. Overall dimensions: 44" diameter x 20'6" long. Shell rated 50 at 250 degree F and tubes rated 38/FV at 250 degree F. Built 1997. Mounted on short saddles. Fittings: top (1) 4", (2) 6"; shell vent/drain (2) 2"; bottom (1) 24" and (1) 6". Tubes are 15' face to face length with (990) 1" tubes. Included bolt-on dished heads. Approximately 3900 Square Foot

MFR: Kennedy

https://images.aaronequipment.com/ItemImages/Heat-Exchangers/Plate-Type/Tranter-UFX-85-6-SP-401_11453484_aa.jpeg
View

Stock No.:

11453484

Used Tranter UFX-85-6-SP-401 Plate Heat Exchanger – High-Efficiency Thermal Transfer

Used 3,908 sq ft Tranter Superchanger Plate Heat Exchanger, model UFX-85-6-SP-401, stainless steel plates, rated 230 psi at 250 f, 12" inlet/outlet, built 2000

MFR: Tranter

https://images.aaronequipment.com/ItemImages/Heat-Exchangers/Plate-Type/Tranter-UFX-85-6-SP-401_11453485_aa.jpeg
View

Stock No.:

11453485

Used Tranter 3,908 Sq. Ft. Superchanger Plate Heat Exchanger – Model UFX-85-6-SP-401

Used- Tranter 3,908 sq ft Superchanger Plate Heat Exchanger, Model UFX-85-6-SP-401. Stainless steel plates. Rated 230 psi at 250 degrees F. 12" Inlet/outlet. Built 2000.

MFR: Tranter

Recently reduced items

https://images.aaronequipment.com/ItemImages/Mixers/Paddle-Mixer/Paul-O-Abbe_52919007_aa.jpeg
Submit Offer $5,190 View

Stock No.:

52919007

Used Paul O Abbe Stainless Steel Fluidizer – 0.7 Cu Ft for Sale

Used- Paul O Abbe Fluidizer, Stainless Steel. Approximate 0.7 cubic feet, 20 liter. Non jacketed trough, 16" wide x 18-1/2" long x 18-1/2" deep. (2) 1-1/2" diameter x 15" long shafts, each have (14) 3" long x 3" wide x 1/8" thick paddles on 1/2" diameter posts. Driven by (2) .33hp, 3/60/230/460 volt, 1700rpm motors, through a reducer 8:1. Bottom bombay doors. 9-1/2" Diameter bottom discharge, 20" discharge height. Includes mounted control panel. Mounted on (4) casters. Serial# A45254.

MFR: Paul O Abbe

https://images.aaronequipment.com/ItemImages/Dryers-Drying-Equipment/Rotary-Hot-Air/Summerlot_52919005_aa.jpg
View

Stock No.:

52919005

Used Summerlot Engineered Products Dryer – 316 Stainless Steel

Used- Summerlot Engineered Products Dryer, 316 Stainless Steel. Cantilevered S/C. 12" long x 6" wide feed hopper, with a 3-3/4" diameter x 48" long screw, 3/4" pitch. Driven by a 1hp, 3/60/208-230/460 volt, 1755 rpm motor. Approximately 10" diameter x 136" long dryer vessel, with (4) fixed baffles. Driven by a 2hp, 3/60/230/460 volt, 1140 rpm motor through reducer, 5.76:1. Approximate 8" diameter discharge with a Flowseal valve. 36" Discharge height. Serial# 88211.

MFR: Summerlot

https://images.aaronequipment.com/ItemImages/Tanks/Stainless-1000-4999-Gal/Vendome-Copper-and-Brass_10128097_aa.jpg
View

Stock No.:

10128097

1,000 gallon Vendome stainless steel processor with dual agitation.

1,000 gallon Vendome stainless steel processor with dual agitation. The bottom and the sides are jacketed. The dimple jackets are rated at 100 psi @ 338F. This unit is equipped with side scrape agitation (5 hp) and a 50 hp top entering homogenizing mixer. 230/460 vac 3 ph electric power required. There is one adjustable baffel inside. The vessel is 72" diameter x 60" straight side with a dished top and bottom. Bottom jacket nozzles are two- 2" RFSO flanges. Side jacket has four-2" RFSO flanges as in/out flanges. Bottom has one 3"tri-clamp nozzle. Top has one- 18" hinged lid manway, one 6" x 18" rectangular inlet, one 6" tri-clamp nozzle, one- 4" sightglass, three-3" nozzles, five- 2" nozzles, and one 1" nozzle. This unit stands on 4 stainless steel pipe legs. National board #299. The skin over the jacket has some dents and repairs. The jackets passed our hydro tests. Built in March 2004.

MFR: Vendome Copper & Brass

https://images.aaronequipment.com/ItemImages/Dryers-Drying-Equipment/Oven/PB-1542_50028005_aa.jpg
View

Stock No.:

50028005

Unused JBT Foodtech FORMCOOK Progrill Contact Cooker – Model PB-1542 Electric ProBake

Unused- JBT Foodtech FORMCOOK Progrill Contact Cooker. Model PB-1542 Electric ProBake. With 10 Degree Incline and Top Belt. Overall Belt Width 60". Usable Belt Width 59", Cooking Length 13.78'. Seven Lower Electric Platens, Upper and Lower Teflon Style Belting. Electrical Specifications 460/3/60 (110/1/60), Electric Drive, Basic Belt Cleaning System, Digital Read-out System, 12" Out-feed Conveyor, Standard Exhaust Fan. Controllogix Processor disconnects on all motors. HMI Screen A. Platens 3/60/460 / 1/60/110 Electric Drive.

Explore our guides.

Enhance your equipment knowledge with our resources.

April 7, 2026

Everything You Should Know Before Buying Used Cannabis Equipment

The cannabis industry has been booming, and with this growth comes the need for efficient and cost-effective manufacturing solutions.

Cannabis Industry Blog

April 7, 2026

Everything You Should Know Before Buying A Used Stainless Steel Tank

What do you need to know before buying a stainless-steel tank?

Tanks Blog

April 7, 2026

Everything You Should Know Before Buying A Used Roll Compactor

Industrial roll compactors play a vital role in material compaction across various industries.

Used Equipment Blog

Sell Equipment

Have surplus equipment? We offer flexible options including direct purchase, consignment, or listing on our marketplace — all backed by trusted professionals.

Learn about selling

Buy Used Equipment

Discover one of the world’s largest inventories of used processing and packaging equipment — ready to ship and backed by decades of industry expertise.

Browse all equipment

Auctions

Join global buyers and sellers at AIS-hosted auctions featuring top-quality surplus equipment from leading facilities around the world.

View current auctions