CALL 630-350-2200
View All Equipment Auctions OEM & New Equipment
Appraisals Equipment Reconditioning Asset Management Plant Liquidation Financing
Company Overview Meet Our Team Locations & Contact

Explore our extensive equipment marketplace

Discover a wide range of used processing and packaging machinery tailored to meet your industry needs. Use our advanced search features to find the perfect equipment quickly and efficiently.

Recently added products

https://images.aaronequipment.com/ItemImages/Boilers/Water-Tube/Miura-LXH-300SG-07_53802003_aa.jpeg
View

Stock No.:

53802003

Buy Used 2015 Miura LXH-300SG-07 Steam Boiler – 10,350 LB/HR Capacity

Used Miura Model LXH-300SG-07 Natural Gas Fired Steam LX Series Boiler. 300HP Capacity. Maximum allowable working pressure 300 psi. Heating surface area 613 square feet. Design temperature 500 degrees F. Maximum designed steaming capacity 10,350 LB/HR. Input 2,919 minimum to 11,678 maximum x 1,000 BTU/Hr. Maximum manifold press 30" W.C. Gas inlet pressure minimum 3 psi to maximum 5 psi. 25HP blower. 15HP feed pump. National Board# 11339, Serial# CA01750087, Built 2015. 3/60/575 Volt.

MFR: Miura

https://images.aaronequipment.com/ItemImages/Boilers/Water-Tube/Miura-LXL-200SG-12_53802004_aa.jpg
View

Stock No.:

53802004

Used Miura LXL-200SG-12 Industrial Steam Boiler | 200 BHP | Gas-Fired | 6900 lb/

Used Miura LX Natural Gas Fired Steam Boiler, Model LXL-200SG-12. 200HP Capacity. Maximum allowable working pressure 30 psi. Heating surface area 367 square feet. Design temperature 300 degrees F. Maximum designed steaming capacity 6,900 LB/HR. Input 1,969 minimum to 7,877 maximum x 1,000 BTU/Hr. Maximum manifold press 26" W.C. Gas inlet pressure minimum 3 psi to maximum 5 psi. 15HP blower. 1.5HP feed pump. National Board# 11335, Serial# CA01550090, Built 2015. 3/60/575 Volt.

MFR: Miura

https://images.aaronequipment.com/ItemImages/Bakery-Equipment/Bakery-Equipment/Hobart-H-600-T_409353_aa.jpg
View

Stock No.:

409353

Pre-Owned Hobart 60 Qt. Mixer H-600-T – Commercial Dough Mixer

Used Hobart Model H-600-T Mixer. 60 Quart capacity. Approximate 18" Diameter X 16" deep bowl. Driven by a 1hp. 3/60/208 Volt, 5.9 Amp motor. Manual tilt. Serial# 1814053.

MFR: Hobart

https://images.aaronequipment.com/ItemImages/Packaging-Equipment/Case-Erectors-Bliss-Box/Moen-PF106-BIFQV_72719002_aa.jpg
View

Stock No.:

72719002

Used Moen PF106-BIFQV Bliss Box Former with SS-231 Case Sealer – 30/35 CPM

Used- Moen Model PF106-BIFQV Bliss Box Former/Bliss Erector with Moen Model SS-231 Continuous Motion Case Sealer. Erector capable of speeds up to 30 cases per minute. Forms a 3 piece bliss box out of end panels, internal flanges and body wrap. Case size range: 8" - 24" (length) x 8" - 24" (width) x 4" - 12" (height). Flat die cut blank range: Body wrap length: 16" - 56", Body wrap width: 12" - 29", end panel width: 8" - 28", end panel height: 4" - 17". Has a Proface HMI and Allen Bradley Compactlogix PLC Control. 3/60/460V. Moen case sealer capable of speeds up to 35cpm. Case / Box size range 7" to 18" long x 8" to 20" wide x 4" to 14" depth. Moen glue system. Last running pet food.

MFR: Moen

https://images.aaronequipment.com/ItemImages/Plastics-Equipment/Temperature-Controllers-Hot-Oil-Units/Mokon-HF4C96DT_54492001_aa.jpg
View

Stock No.:

54492001

Unused Mokon HF4C96DT Hot Oil Temperature Controller | 96 kW Thermal Fluid Heating System

Unused Mokon HF4C96DT Hot Oil Temperature Controller | 96 kW Thermal Fluid Heating System. (1) Zone, 96 kW. 5 HP motor. Maximum fluid temperature 600 degrees F. Contains 58 gallon reservoir tank. 0.5 HP Supply pump. 3/60/460V, built 2020.

MFR: Mokon

https://images.aaronequipment.com/ItemImages/Plastics-Equipment/Temperature-Controllers-Hot-Oil-Units/Mokon-HF4C96DT_54492002_aa.jpg
View

Stock No.:

54492002

Industrial Thermal Fluid Heating System | Unused Mokon 96 kW Hot Oil Controller

Industrial Thermal Fluid Heating System | Unused Mokon 96 kW Hot Oil Controller. (1) Zone, 96 kW. 5 HP motor. Maximum fluid temperature 600 degrees F. Contains 58 gallon reservoir tank. 0.5 HP Supply pump. 3/60/460V, built 2020.

MFR: Mokon

https://images.aaronequipment.com/ItemImages/Machine-Tools/Machine-Tools/Fico-MMS-X_54315002_aa.jpg
View

Stock No.:

54315002

Used BESI Fico MMS-X Molding Machine – 180 Ton Clamp Force (Built 2023)

Used- Besi Molding Machine, Model Fico MMS-X. 180 ton max. clamp force. Up to 125mm x 300mm x 10mm strip size. 150mm max. mold opening. 150 bar max. transfer pressure. 14, 14.3, 16, or 18mm pellet diameter. Max. of 12 plungers. +/- 2 degrees C max. cavity temperature difference. 3/50-60/208-480V. Built 2023.

https://images.aaronequipment.com/ItemImages/Packaging-Equipment/Stretch-Wrappers-Automatic/Mollers_73402001_aa.jpg
View

Stock No.:

73402001

Used Moellers Automatic Stretch Hooding System – 40 Loads per Hour, Variable Frequency Drive

Used- Moellers Automatic Stretch Hooding System. 40 loads per hour capacity; 42" x 42" minimum load size; 46" x 46" maximum load size; 30" (including pallet) minimum load height; 108" (including pallet) maximum height; 1 HP variable frequency conveyor drive motor; .5 HP film drive motor; 1.5 variable frequency carriage drive motor; 2,000 Watts 48V impulse sealing gate; 1 SCFM air consumption. Includes the film drive system, precision film impulse sealing system, flying knife film cut-off, and under pallet stretch function. New in 2011.

MFR: Mollers

https://images.aaronequipment.com/ItemImages/Packaging-Equipment/Beverage-Equipment-Carbonated-Monoblock/BC15-12-12-1-Tribloc_73435001_aa.jpg
View

Stock No.:

73435001

Used Moravek Carbonated Beverage Filling Line – Model BC15 + 12/12/1 | 12 & 22 oz Changeover | Craft Beer | 2014

Used- Moravek Carbonated Beverage Filling Line, Model BC15 + 12/12/1. Includes Tribloc filler with 12 oz and 22 oz changeover parts. Filler includes pre-filter valve cluster including vacuum pump, rinser infeed and peracetic doser, conveyance for infeed and outfeed. We also have misc spare parts. Last used on craft-style beer. New 2014. 3/60/480V.

https://images.aaronequipment.com/ItemImages/Cannabis-Equipment/Extraction-and-Processing-Equipment/FIYRR-XTR_53811001_ab.jpg
View

Stock No.:

53811001

Used MRX Xtractor FIYRR-XTR 20L Supercritical CO2 Extraction System

Used MRX Xtractor, model FIYRR-XTR 20L, Supercritical, close loop, fluid/CO2/botanical extraction system. Run time dependent on biomass quarator vessels, with NBN - 1325, 1322, 1324 ( 2015) 230-460v, 50/60hz. Control panel with AB PanelView Hmi and Compact Logix ethernet module. Festo pneumatic valve control bank, maximator pneumatic part. Haskel refrigerant recovery pump, associated valves on tubular stainless frame. ntity, 1800psi, dual phase pump ( liquid ad gas), with JV Northwest Inc, stainless extraction, accumulation and separator vessels, with NBN - 1325, 1322, 1324 ( 2015) 230-460v, 50/60hz, control panel with AB PanelView Hmi and Compact Logix ethernet module, Festo pneumatic valve control bank, maximator pneumatic part, Haskel refrigerant recovery pump, associated valves on tubular stainless frame.

https://images.aaronequipment.com/ItemImages/Presses/Screw-De-Watering/MS-10_54528001_aa.jpg
View

Stock No.:

54528001

Used AL-INS MS-10 Stainless Steel Screw Press Separator – 75-100 GPM Capacity – Built 2024

Used- AL-INS Screw Press Separator, Model MS-10. Stainless steel construction. Approx. 75-100 GPM flow rate. 0.25mm screen size. 10" auger size. 10" discharge. Driven by a 15hp 3/60/230/460v 1776/37 rpm motor. Serial# 0024, Built 2024. Previously used for juices.

https://images.aaronequipment.com/ItemImages/Packaging-Equipment/Scales-Packaging-Combination/MP-14-1000-400-H-UL_72602004_aa.jpg
View

Stock No.:

72602004

Used Multipond MP-14-1000-400-H-UL 14-Head Radial Combination Net Weigh Scale

Used- Multipond Model MP-14-1000-400-H-UL 14 Head Radial Combination Net Weigh Scale with Dimpled Buckets.Capable of speeds up to 200 WPM (depending on application). Has 1 Liter 1000cc dimpled surface buckets. CE Certified. Includes vibratory cross feeder and scale stand. Last used in food operation mounted above a Yeaman cartoner.

Recently reduced items

https://images.aaronequipment.com/ItemImages/Mixers/Paddle-Mixer/Paul-O-Abbe_52919007_aa.jpeg
Submit Offer $5,190 View

Stock No.:

52919007

Used Paul O Abbe Stainless Steel Fluidizer – 0.7 Cu Ft for Sale

Used- Paul O Abbe Fluidizer, Stainless Steel. Approximate 0.7 cubic feet, 20 liter. Non jacketed trough, 16" wide x 18-1/2" long x 18-1/2" deep. (2) 1-1/2" diameter x 15" long shafts, each have (14) 3" long x 3" wide x 1/8" thick paddles on 1/2" diameter posts. Driven by (2) .33hp, 3/60/230/460 volt, 1700rpm motors, through a reducer 8:1. Bottom bombay doors. 9-1/2" Diameter bottom discharge, 20" discharge height. Includes mounted control panel. Mounted on (4) casters. Serial# A45254.

MFR: Paul O Abbe

https://images.aaronequipment.com/ItemImages/Dryers-Drying-Equipment/Rotary-Hot-Air/Summerlot_52919005_aa.jpg
View

Stock No.:

52919005

Used Summerlot Engineered Products Dryer – 316 Stainless Steel

Used- Summerlot Engineered Products Dryer, 316 Stainless Steel. Cantilevered S/C. 12" long x 6" wide feed hopper, with a 3-3/4" diameter x 48" long screw, 3/4" pitch. Driven by a 1hp, 3/60/208-230/460 volt, 1755 rpm motor. Approximately 10" diameter x 136" long dryer vessel, with (4) fixed baffles. Driven by a 2hp, 3/60/230/460 volt, 1140 rpm motor through reducer, 5.76:1. Approximate 8" diameter discharge with a Flowseal valve. 36" Discharge height. Serial# 88211.

MFR: Summerlot

https://images.aaronequipment.com/ItemImages/Tanks/Stainless-1000-4999-Gal/Vendome-Copper-and-Brass_10128097_aa.jpg
View

Stock No.:

10128097

1,000 gallon Vendome stainless steel processor with dual agitation.

1,000 gallon Vendome stainless steel processor with dual agitation. The bottom and the sides are jacketed. The dimple jackets are rated at 100 psi @ 338F. This unit is equipped with side scrape agitation (5 hp) and a 50 hp top entering homogenizing mixer. 230/460 vac 3 ph electric power required. There is one adjustable baffel inside. The vessel is 72" diameter x 60" straight side with a dished top and bottom. Bottom jacket nozzles are two- 2" RFSO flanges. Side jacket has four-2" RFSO flanges as in/out flanges. Bottom has one 3"tri-clamp nozzle. Top has one- 18" hinged lid manway, one 6" x 18" rectangular inlet, one 6" tri-clamp nozzle, one- 4" sightglass, three-3" nozzles, five- 2" nozzles, and one 1" nozzle. This unit stands on 4 stainless steel pipe legs. National board #299. The skin over the jacket has some dents and repairs. The jackets passed our hydro tests. Built in March 2004.

MFR: Vendome Copper & Brass

https://images.aaronequipment.com/ItemImages/Dryers-Drying-Equipment/Oven/PB-1542_50028005_aa.jpg
View

Stock No.:

50028005

Unused JBT Foodtech FORMCOOK Progrill Contact Cooker – Model PB-1542 Electric ProBake

Unused- JBT Foodtech FORMCOOK Progrill Contact Cooker. Model PB-1542 Electric ProBake. With 10 Degree Incline and Top Belt. Overall Belt Width 60". Usable Belt Width 59", Cooking Length 13.78'. Seven Lower Electric Platens, Upper and Lower Teflon Style Belting. Electrical Specifications 460/3/60 (110/1/60), Electric Drive, Basic Belt Cleaning System, Digital Read-out System, 12" Out-feed Conveyor, Standard Exhaust Fan. Controllogix Processor disconnects on all motors. HMI Screen A. Platens 3/60/460 / 1/60/110 Electric Drive.

Explore our guides.

Enhance your equipment knowledge with our resources.

April 7, 2026

Everything You Should Know Before Buying Used Cannabis Equipment

The cannabis industry has been booming, and with this growth comes the need for efficient and cost-effective manufacturing solutions.

Cannabis Industry Blog

April 7, 2026

Everything You Should Know Before Buying A Used Stainless Steel Tank

What do you need to know before buying a stainless-steel tank?

Tanks Blog

April 7, 2026

Everything You Should Know Before Buying A Used Roll Compactor

Industrial roll compactors play a vital role in material compaction across various industries.

Used Equipment Blog

Sell Equipment

Have surplus equipment? We offer flexible options including direct purchase, consignment, or listing on our marketplace — all backed by trusted professionals.

Learn about selling

Buy Used Equipment

Discover one of the world’s largest inventories of used processing and packaging equipment — ready to ship and backed by decades of industry expertise.

Browse all equipment

Auctions

Join global buyers and sellers at AIS-hosted auctions featuring top-quality surplus equipment from leading facilities around the world.

View current auctions