CALL 630-350-2200
View All Equipment Auctions OEM & New Equipment
Appraisals Equipment Reconditioning Asset Management Plant Liquidation Financing Centrifuge Parts & Services
Company Overview Meet Our Team Locations & Contact

Explore our extensive equipment marketplace

Discover a wide range of used processing and packaging machinery tailored to meet your industry needs. Use our advanced search features to find the perfect equipment quickly and efficiently.

Recently added products

https://images.aaronequipment.com/ItemImages/Pumps/Stainless-Centrifugal/53140008_aa.png
Submit Offer $587 View

Stock No.:

53140008

Buy Used ARO Air Diaphragm Pumps – High-Performance Fluid Transfer

Lot of (2) Used- ARO Air Operated Diaphragm Pumps.

https://images.aaronequipment.com/ItemImages/General-Equipment/General-Equipment/53140013_aa.png
Submit Offer $750 View

Stock No.:

53140013

USA Lab 12L Digital Heating Mantle – 1400W, 12L Capacity, 300°C Max

Used USA Lab 12L Digital Heating Mantle. 12L Capacity. Approximate 15.74" diameter x 11.81". 1400W Mantle, 1000W Jacket. 60W motor. Maximum temperature 300 degrees C. Max 3000 RPM. 220v Power.

https://images.aaronequipment.com/ItemImages/Chillers/Chillers/HC-5-10_53140014_aa.png
Submit Offer $1,000 View

Stock No.:

53140014

Used USA Lab HC-5/10 Circulating Chiller & Heater – 5L, 30L/min Flow

Used- USA Lab Model HC-5/10 Circulating Chiller & Heater. Pump flow rate 30L/min. 5L Reservoir capacity. Refrigerating BTU's 4,500 to 1,000. Heating Power 1000 W. Batch# 20050258. 1/60/110 Volt, 20 Amp. Built 2020.

https://images.aaronequipment.com/ItemImages/Lab-Equipment/Lab-Equipment/53140015_aa.png
Submit Offer $300 View

Stock No.:

53140015

Buy Used SH-3 Hot Plate Stirrer – 5000ml, 1-Inch Stir Bar, Lab-Ready

Used- SH-3 Hot Plate Magnetic Stirrer 5000ml Volume with Dual Control and 1 Inch Stir Bar

https://images.aaronequipment.com/ItemImages/Cannabis-Equipment/Drying-Equipment/IEC_52675001_aa.jpg
View

Stock No.:

52675001

Used Industrial Hemp Dryer for Sale – IEC Thermo 3000S, 3000 lbs/hr, Gas-Fired

Used- IEC Thermo High-Efficiency Multi-Phase Hemp Dryer, Model 3000S. 3000 pounds/hour Wet Hemp Feed-In Capacity at 70% Moisture Level. 88 Gallons/Hour LP and 8,000 Cubic Feet/Hour Natural Gas. Metered Feed-in Conveyor/Hopper, Feed-out Auger, and Connecting Conveyors. Continuous Feed, 2-3-Minute Drying Time, Protection of your Cultivars with Low Temperature Operations, Biomass Reaching no more than 130-140 Degrees F.

MFR: IEC

https://images.aaronequipment.com/ItemImages/Mills/Roller-Mill/YGM-75_52900001_aa.jpg
View

Stock No.:

52900001

Used Shibo YGM-75 Roller Mill – 22 kW Motor, Carbon Steel | 160 RPM Industrial Grinder

Used- Shibo Manufacturing Model YGM-75 Roller Mill. Driven by 22kw (29.5hp) motor. Carbon Steel. 160 RPM rotor speed.

https://images.aaronequipment.com/ItemImages/Water-Treatment-Equipment/Water-Treatment-Equipment/Alfa-Laval_52878005_aa.jpg
View

Stock No.:

52878005

Used Alfa Laval Membrane System with Ultrafiltration (UF) – 130 m³/h Permeate Flow

Used-Alfa Laval Membrane System with Ultrafiltration UF, Permeate flow rate 130 m3/h (570 gpm) per Vessel, Design average flux of 30 l/m2h, Spiral feed spacer of 30 mil. (2) Vessels each pair with a common feed line and the ability to share on CIP System.

MFR: Alfa Laval

https://images.aaronequipment.com/ItemImages/Homogenizers/Homogenizers/PX32011_52801001_aa.jpg
View

Stock No.:

52801001

Used Bertoli Giotto PX32011 High Pressure Pump – Stainless Steel | 3/60/460V | Baby Food Grade Application

Used- Bertoli Giotto Series Model PX32011 Stainless Steel High Pressure Pump. Last used in baby food nutritional operation. 3/60/460V

https://images.aaronequipment.com/ItemImages/Bins/Bins/52850005_aa.jpeg
Submit Offer $3,325 View

Stock No.:

52850005

Used Storage Bin, 304 Stainless Steel, 600 gallons

Used- Storage Bin, 304 Stainless Steel, Approximately 600 gallons, Vertical. Approximately 47" diameter x 76" straight side, 32" long cone. Dish Top, Coned Bottom. Openings top: 16" manway with (2) 1-1/2", 1" threaded openings on flange, (2) 4" with sight glass, 2-1/2" side top opening. 16" Diameter center bottom outlet. Side lug mounted.

https://images.aaronequipment.com/ItemImages/Complete-Plants/Complete-Plants-2/Crown-Iron-Works_52857001_aa.jpg
View

Stock No.:

52857001

Title: Used Crown Iron Works Model 48 Milling Ring Flash Drying System? | Industrial Drying System

Used- Crown Iron Works, Model 48, Milling Ring Flash Drying System. It was designed and used for food-grade orange pulp with 17,000 Lbs/Hr capacity but the plant can be used for a wide range of applications in various industries including: Drying food products such as grains, cereals, fruits, vegetables, herbs, and spices. Pharmaceutical ingredients, intermediates, and final products Drying various chemicals, including powders, granules, and crystalline materials Drying minerals and mining products such as ores, concentrates, and mineral powders Animal Feed Drying and processing environmental materials, such as sludges, biomass, and waste products. System designed for drying of powers, filter & centrifuge cakes, and slurries where a discrete and fine end product is desired. The Milling Flash Dryer is basically a low energy jet mill, that uses jets of low-pressure air to encourage inter particle collisions between pieces of feed material. These inter particle collisions break up the feed material in the dryer with no moving parts in the dryer or airstream. The dryer is in the shape of a torus, or donut that is broken up into 2 basic areas: (1) Manifold & Milling area; (2) Classifier. The ideal feed material for the Flash Dryer is a crumbly and free flowing cake that breaks up readily when it enters the drying air stream. The feed material enters the recirculating hot air upstream of the first nozzle, with the centrifugal forces generated by the air concentrating the material in the area above the nozzles. Particle-to-particle collisions begin immediately, deagglomerating the material before hard agglomerates can form. A tremendous amount of surface area is created allowing evaporation to occur quickly, thereby depressing air temperature in a very short period of time. Centrifugal forces are generated by the recirculating gases within the dryer, forcing the larger particles to the peripheral walls. Finer material is displaced towards the inside radius of the dryer where the classifier outlet is located. Fine product exits the dryer along with the exhaust gas vapor. Larger particles or agglomerates are recycled to the nozzle area dryer for further de-agglomeration and drying.

MFR: Crown Iron Works

https://images.aaronequipment.com/ItemImages/Cannabis-Equipment/Drying-Equipment/52858001_aa.jpg
View

Stock No.:

52858001

Continuous Belt-Style Dryer – Propane/Natural Gas, Low-Temp, 40ft Long, 2020

Used- Large Capacity Commercial Food / Hemp/ Agricultural Belt Style Continuous Dryer; dryer body measures 8 feet wide by 8 feet tall by 40 feet long with additional loading conveyor belt 8 feet wide by 17 feet; UL approved electrical circuits, heater and heater controls; software is US written and supported; 480 three phase power; 24 hour run cycles; multipurpose quick change burners; Variable temperature burners to 50,000 BTUs; max dry at 180 degrees; Drying cycles with propane or can be changed to natural gas; has been modified to dry at substantially slower speeds to increase yield and limited diminishing effects of Turpines and other desirable nutrients from hemp or other plants.. Built new in 2020. Like new condition with only 40 hours of set up and run time. As of listing, expert set up and dial in time available, can assist in shipping. Make offer. The unit was last used for drying industrial hemp but is also suitable for a variety of agricultural, food, and industrial applications. Guoxin

https://images.aaronequipment.com/ItemImages/Pumps/Sump-Pumps/S3000HH_52627001_aa.jpg
View

Stock No.:

52627001

Unused Stancor S3000HH Submersible Dewatering Pump – 30HP, 4” NPT Discharge

Unused - Stancor High Head Submersible Dewatering Pump, Model S3000HH. ESA Approved. 575V / 30A / 30HP / 3 Phase. Maximum Volumetric Flow Rate: 500 US gpm, Maximum Head: 380 feet, Discharge: 4" NPT. Weight: 320 lbs - Dimensions (Diameter x Height): 16-1/8" x 39-1/8".418. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

Recently reduced items

https://images.aaronequipment.com/ItemImages/Mixers/Paddle-Mixer/Paul-O-Abbe_52919007_aa.jpeg
Submit Offer $5,190 View

Stock No.:

52919007

Used Paul O Abbe Stainless Steel Fluidizer – 0.7 Cu Ft for Sale

Used- Paul O Abbe Fluidizer, Stainless Steel. Approximate 0.7 cubic feet, 20 liter. Non jacketed trough, 16" wide x 18-1/2" long x 18-1/2" deep. (2) 1-1/2" diameter x 15" long shafts, each have (14) 3" long x 3" wide x 1/8" thick paddles on 1/2" diameter posts. Driven by (2) .33hp, 3/60/230/460 volt, 1700rpm motors, through a reducer 8:1. Bottom bombay doors. 9-1/2" Diameter bottom discharge, 20" discharge height. Includes mounted control panel. Mounted on (4) casters. Serial# A45254.

MFR: Paul O Abbe

https://images.aaronequipment.com/ItemImages/Dryers-Drying-Equipment/Rotary-Hot-Air/Summerlot_52919005_aa.jpg
View

Stock No.:

52919005

Used Summerlot Engineered Products Dryer – 316 Stainless Steel

Used- Summerlot Engineered Products Dryer, 316 Stainless Steel. Cantilevered S/C. 12" long x 6" wide feed hopper, with a 3-3/4" diameter x 48" long screw, 3/4" pitch. Driven by a 1hp, 3/60/208-230/460 volt, 1755 rpm motor. Approximately 10" diameter x 136" long dryer vessel, with (4) fixed baffles. Driven by a 2hp, 3/60/230/460 volt, 1140 rpm motor through reducer, 5.76:1. Approximate 8" diameter discharge with a Flowseal valve. 36" Discharge height. Serial# 88211.

MFR: Summerlot

https://images.aaronequipment.com/ItemImages/Tanks/Stainless-1000-4999-Gal/Vendome-Copper-and-Brass_10128097_aa.jpg
View

Stock No.:

10128097

1,000 gallon Vendome stainless steel processor with dual agitation.

1,000 gallon Vendome stainless steel processor with dual agitation. The bottom and the sides are jacketed. The dimple jackets are rated at 100 psi @ 338F. This unit is equipped with side scrape agitation (5 hp) and a 50 hp top entering homogenizing mixer. 230/460 vac 3 ph electric power required. There is one adjustable baffel inside. The vessel is 72" diameter x 60" straight side with a dished top and bottom. Bottom jacket nozzles are two- 2" RFSO flanges. Side jacket has four-2" RFSO flanges as in/out flanges. Bottom has one 3"tri-clamp nozzle. Top has one- 18" hinged lid manway, one 6" x 18" rectangular inlet, one 6" tri-clamp nozzle, one- 4" sightglass, three-3" nozzles, five- 2" nozzles, and one 1" nozzle. This unit stands on 4 stainless steel pipe legs. National board #299. The skin over the jacket has some dents and repairs. The jackets passed our hydro tests. Built in March 2004.

MFR: Vendome Copper & Brass

https://images.aaronequipment.com/ItemImages/Dryers-Drying-Equipment/Oven/PB-1542_50028005_aa.jpg
View

Stock No.:

50028005

Unused JBT Foodtech FORMCOOK Progrill Contact Cooker – Model PB-1542 Electric ProBake

Unused- JBT Foodtech FORMCOOK Progrill Contact Cooker. Model PB-1542 Electric ProBake. With 10 Degree Incline and Top Belt. Overall Belt Width 60". Usable Belt Width 59", Cooking Length 13.78'. Seven Lower Electric Platens, Upper and Lower Teflon Style Belting. Electrical Specifications 460/3/60 (110/1/60), Electric Drive, Basic Belt Cleaning System, Digital Read-out System, 12" Out-feed Conveyor, Standard Exhaust Fan. Controllogix Processor disconnects on all motors. HMI Screen A. Platens 3/60/460 / 1/60/110 Electric Drive.

Explore our guides.

Enhance your equipment knowledge with our resources.

April 7, 2026

Everything You Should Know Before Buying Used Cannabis Equipment

The cannabis industry has been booming, and with this growth comes the need for efficient and cost-effective manufacturing solutions.

Cannabis Industry Blog

April 7, 2026

Everything You Should Know Before Buying A Used Stainless Steel Tank

What do you need to know before buying a stainless-steel tank?

Tanks Blog

April 7, 2026

Everything You Should Know Before Buying A Used Roll Compactor

Industrial roll compactors play a vital role in material compaction across various industries.

Used Equipment Blog

Sell Equipment

Have surplus equipment? We offer flexible options including direct purchase, consignment, or listing on our marketplace — all backed by trusted professionals.

Learn about selling

Buy Used Equipment

Discover one of the world’s largest inventories of used processing and packaging equipment — ready to ship and backed by decades of industry expertise.

Browse all equipment

Auctions

Join global buyers and sellers at AIS-hosted auctions featuring top-quality surplus equipment from leading facilities around the world.

View current auctions