CALL 630-350-2200
View All Equipment Auctions OEM & New Equipment
Appraisals Equipment Reconditioning Asset Management Plant Liquidation Financing
Company Overview Meet Our Team Locations & Contact

Explore our extensive equipment marketplace

Discover a wide range of used processing and packaging machinery tailored to meet your industry needs. Use our advanced search features to find the perfect equipment quickly and efficiently.

Recently added products

https://images.aaronequipment.com/ItemImages/Mills/Ball-Mill/Paul-O-Abbe-BM223_54444001_ab.jpg
View

Stock No.:

54444001

Unused Paul O. Abbe BM-223 Ball Mill – Stainless Steel Industrial Grinding Mill

Unused Model BM-223 all-stainless-steel ball mill featuring a 2 tapered cylinder for full discharge and a split, hinged clamshell dry discharge housing. The cylinder measures 40 inches in diameter by 44 inches long inside the shell, with an internal finish of 32 RA (180 grit polish) and a shell thickness of 5/8 inch. The cylinder and product-contact surfaces are constructed of 304 stainless steel. Welded lifter bars terminate 1.5 inches from the ends, with welds laid down and ground to a minimum 1/4 inch radius and finished pit-free. The total mill volume is 32 ft (234 gallons), with a dry working volume of 8 ft (25% of total). The unit includes a 13.25 inch by 14.75 inch rectangular cover hatch frame welded into the side of the mill, a stainless steel grinding cover contoured to the inside radius, and a stainless steel dry discharge cover with 0.25 inch slots. The dry discharge housing fully encloses the mill cylinder to capture and direct solids to a chute or hopper, utilizing the patented 2 taper for full discharge (US Patent 10,086,379, Oct 2, 2018). The clamshell housing design incorporates stainless counterweights and stainless steel construction, with a nominal 60 chute/hopper below the mill and a 12 inch square bottom opening. Housing product-contact surfaces are 304 stainless steel with a 32 RA (180 grit polish) finish. Discharge height is 48 inches from hatch to floor. Additional features include a sliding UHMW cover on top of the housing. The mill drive is an SEW hollow bore, 20 HP TEFC motor rated for 230/460 volt, 3-phase, 60 Hz operation, providing a nominal cylinder speed of 24 RPM. The system is supported by two welded A" frame stands with box-style extensions for added height, constructed of carbon steel and coated with Sherwin-Williams Tile Clad epoxy. Overall dimensions are 138 inches high by 105 inches long by 64 inches deep.

MFR: Paul O Abbe

https://images.aaronequipment.com/ItemImages/Dryers-Drying-Equipment/Oven/54444002_ab.jpg
View

Stock No.:

54444002

Friedrich Industrial Ovens (Qty 2) – Process Heating Ovens Lot

Qty (2) Friedrichs Oven (Parts located at Rick's Shop and main Oven located at a rigging company) *ONLY 1 CONTROL CABINET & STAINLESS STEEL EXHAUST GOES WITH LOT*

https://images.aaronequipment.com/ItemImages/Screeners-Sifters/Circular-Screener-Parts/Sweco_54444005_aa.jpg
Submit Offer $750 View

Stock No.:

54444005

New Sweco 30” Diameter Screens – Lot of Vibratory Separator Screens (Various Mesh Sizes)

New/ Unused Sweco Parts. Lot of 30" Diameter Screens with various mesh sizes.

MFR: Sweco

https://images.aaronequipment.com/ItemImages/Centrifuges/Decanter/Flottweg-Z4-4-441_54481001_aa.jpg
View

Stock No.:

54481001

Used Flottweg Z4D/4-454 Decanter Centrifuge | Solid Bowl 316SS Wastewater Centrifuge

Used- Flottweg Z4D/4-454 Solid Bowl Decanter Centrifuge. 316 Stainless Steel construction (product contact areas), maximum bowl speed 3500 rpm, single lead conveyor with welded hardfacing. Feed pipe, lubrication system, adjustable liquid plate dams, Approx 30 KW (40.2 HP) main drive motor, coupling, frame/casing, vibration isolators, safety guards. (1) Control panel, (1) Hydraulic unit, (1) 20 container, on wheels. Previously used in a wastewater treatment application. Our freight specialists can assist with freight and customs documentation to help make a smooth transfer.

MFR: Flottweg

https://images.aaronequipment.com/ItemImages/Filters/Horizontal-Belt-Extractor/Press-Technology-120-WT_54456001_aa.jpeg
View

Stock No.:

54456001

Used Press Technologies 120-WT Twin Wire Wedge Thickener | 10’ Belt Sludge Dewatering System

Used- Press Technologies Twin Wire Wedge Thickener, Model 120-WT. 10' wide belt. Uses (2) 40 HP dual press drive motors. Utilizes (2) 12'' wide filtrate drain troughs. Pulp is discharged through 25 HP screw conveyor. Includes all associated electrical components, transformers, pumps, motors, and valves.

MFR: Press Technology

https://images.aaronequipment.com/ItemImages/General-Equipment/General-Equipment/54444012_aa.jpg
Submit Offer $1,250 View

Stock No.:

54444012

Used Stainless Steel Powder Hopper – Vacuum Transfer Feed System

Used Powder Hopper, Stainless steel, last running vacuum powder transfer.

https://images.aaronequipment.com/ItemImages/Chillers/Air-Cooled-Chillers/RH1P4221ST_54444013_ae.jpg
Submit Offer $1,250 View

Stock No.:

54444013

Rheem Air Conditioner Model RH1P4221STANJA – 208/240V Single Phase AC Unit

Used Rheem Air Conditioner, Model RH1P4221STANJA. Unit rated for 208 / 240 volts, single phase, 60 Hz, with nominal current draw of 7.0 amps.

https://images.aaronequipment.com/ItemImages/Plastics-Equipment/Sheet-Extrusion-Lines/PTI-6500_54436001_aa.jpg
View

Stock No.:

54436001

Used PTI Trident 6500 Sheet Extrusion Line – 6.5" 500 HP High-Output Plastic Sheet Production System

Used- PTI Trident Sheet Extrusion Line, Model 6500. 6.5" screw diameter. 36:1 L/D. 500 HP, 1800 RPM main drive. With Flender gearbox; PTI model H6018 sheet takeoff system; Revolution Roll stand; EDI 54" W dies; Sandvik 60" stainless steel belt, water cooled dual zone cooling system; pull rolls; trim saws (capable of max. thickness of 1.25"); Vulcan automatic sheet-stacker (capable of .25-.75 thickness, up to 120" length); dust collector; granulation equipment. Titan PLC control system. 3/60/460V. Built 2006.

MFR: PTI

https://images.aaronequipment.com/ItemImages/Plastics-Equipment/Size-Reduction-Grinders-and-Granulators/Cumberland-284-GRAN-3_54599004_aa.jpg
Submit Offer $6,500 View

Stock No.:

54599004

Used- Cumberland Granulator, Model 284 GRAN 3KN, Serial# 425000-7644.

MFR: Cumberland

https://images.aaronequipment.com/ItemImages/Dust-Collectors/Dust-Collectors/Mikro-Corporation_54599001_aa.jpg
View

Stock No.:

54599001

Used- Mikro- Pulsaire Fabric Filter.

MFR: Mikro Corporation

https://images.aaronequipment.com/ItemImages/Generators/Steam-Turbine/Solar-Centaur-40_54601001_aa.jpg
View

Stock No.:

54601001

Used CAT Solar Turbines Centaur 40 Natural Gas Turbine Power Package – Approx. 3.7 MW

Used- Cat Solar Turbines Turbine Package. Approximate output of 3.5 MW per unit/Approximately 7 MW total. Natural gas powered. Consists of (2) Solar Turbine Model Centaur 40; Exhaust systems; Gas-fired burner systems; Associated electrical infrastructure. Configured for venting or integration with steam generation systems. Serial# HG85083 and HG85093. Reported approximate 30,000 operating hours.

MFR: Solar

https://images.aaronequipment.com/ItemImages/Tanks/Carbon-Steel/25000-gal_54602001_aa.jpg
View

Stock No.:

54602001

Unused Lannon 25,000 Gallon Carbon Steel Horizontal Storage Tank – 11' Diameter x 35'3" Long

Unused- Lannon Horizontal Tank, 25,000 Gallon. Carbon steel construction. 11' diameter x 35'3" long. Top manway. Side mounted ladder. Mounted on saddle. Built 2017.

Recently reduced items

https://images.aaronequipment.com/ItemImages/Mixers/Paddle-Mixer/Paul-O-Abbe_52919007_aa.jpeg
Submit Offer $5,190 View

Stock No.:

52919007

Used Paul O Abbe Stainless Steel Fluidizer – 0.7 Cu Ft for Sale

Used- Paul O Abbe Fluidizer, Stainless Steel. Approximate 0.7 cubic feet, 20 liter. Non jacketed trough, 16" wide x 18-1/2" long x 18-1/2" deep. (2) 1-1/2" diameter x 15" long shafts, each have (14) 3" long x 3" wide x 1/8" thick paddles on 1/2" diameter posts. Driven by (2) .33hp, 3/60/230/460 volt, 1700rpm motors, through a reducer 8:1. Bottom bombay doors. 9-1/2" Diameter bottom discharge, 20" discharge height. Includes mounted control panel. Mounted on (4) casters. Serial# A45254.

MFR: Paul O Abbe

https://images.aaronequipment.com/ItemImages/Dryers-Drying-Equipment/Rotary-Hot-Air/Summerlot_52919005_aa.jpg
View

Stock No.:

52919005

Used Summerlot Engineered Products Dryer – 316 Stainless Steel

Used- Summerlot Engineered Products Dryer, 316 Stainless Steel. Cantilevered S/C. 12" long x 6" wide feed hopper, with a 3-3/4" diameter x 48" long screw, 3/4" pitch. Driven by a 1hp, 3/60/208-230/460 volt, 1755 rpm motor. Approximately 10" diameter x 136" long dryer vessel, with (4) fixed baffles. Driven by a 2hp, 3/60/230/460 volt, 1140 rpm motor through reducer, 5.76:1. Approximate 8" diameter discharge with a Flowseal valve. 36" Discharge height. Serial# 88211.

MFR: Summerlot

https://images.aaronequipment.com/ItemImages/Tanks/Stainless-1000-4999-Gal/Vendome-Copper-and-Brass_10128097_aa.jpg
View

Stock No.:

10128097

1,000 gallon Vendome stainless steel processor with dual agitation.

1,000 gallon Vendome stainless steel processor with dual agitation. The bottom and the sides are jacketed. The dimple jackets are rated at 100 psi @ 338F. This unit is equipped with side scrape agitation (5 hp) and a 50 hp top entering homogenizing mixer. 230/460 vac 3 ph electric power required. There is one adjustable baffel inside. The vessel is 72" diameter x 60" straight side with a dished top and bottom. Bottom jacket nozzles are two- 2" RFSO flanges. Side jacket has four-2" RFSO flanges as in/out flanges. Bottom has one 3"tri-clamp nozzle. Top has one- 18" hinged lid manway, one 6" x 18" rectangular inlet, one 6" tri-clamp nozzle, one- 4" sightglass, three-3" nozzles, five- 2" nozzles, and one 1" nozzle. This unit stands on 4 stainless steel pipe legs. National board #299. The skin over the jacket has some dents and repairs. The jackets passed our hydro tests. Built in March 2004.

MFR: Vendome Copper & Brass

https://images.aaronequipment.com/ItemImages/Dryers-Drying-Equipment/Oven/PB-1542_50028005_aa.jpg
View

Stock No.:

50028005

Unused JBT Foodtech FORMCOOK Progrill Contact Cooker – Model PB-1542 Electric ProBake

Unused- JBT Foodtech FORMCOOK Progrill Contact Cooker. Model PB-1542 Electric ProBake. With 10 Degree Incline and Top Belt. Overall Belt Width 60". Usable Belt Width 59", Cooking Length 13.78'. Seven Lower Electric Platens, Upper and Lower Teflon Style Belting. Electrical Specifications 460/3/60 (110/1/60), Electric Drive, Basic Belt Cleaning System, Digital Read-out System, 12" Out-feed Conveyor, Standard Exhaust Fan. Controllogix Processor disconnects on all motors. HMI Screen A. Platens 3/60/460 / 1/60/110 Electric Drive.

Explore our guides.

Enhance your equipment knowledge with our resources.

April 7, 2026

Everything You Should Know Before Buying Used Cannabis Equipment

The cannabis industry has been booming, and with this growth comes the need for efficient and cost-effective manufacturing solutions.

Cannabis Industry Blog

April 7, 2026

Everything You Should Know Before Buying A Used Stainless Steel Tank

What do you need to know before buying a stainless-steel tank?

Tanks Blog

April 7, 2026

Everything You Should Know Before Buying A Used Roll Compactor

Industrial roll compactors play a vital role in material compaction across various industries.

Used Equipment Blog

Sell Equipment

Have surplus equipment? We offer flexible options including direct purchase, consignment, or listing on our marketplace — all backed by trusted professionals.

Learn about selling

Buy Used Equipment

Discover one of the world’s largest inventories of used processing and packaging equipment — ready to ship and backed by decades of industry expertise.

Browse all equipment

Auctions

Join global buyers and sellers at AIS-hosted auctions featuring top-quality surplus equipment from leading facilities around the world.

View current auctions