CALL 630-350-2200
View All Equipment Auctions OEM & New Equipment
Appraisals Equipment Reconditioning Asset Management Plant Liquidation Financing Centrifuge Parts & Services
Company Overview Meet Our Team Locations & Contact

Explore our extensive equipment marketplace

Discover a wide range of used processing and packaging machinery tailored to meet your industry needs. Use our advanced search features to find the perfect equipment quickly and efficiently.

Recently added products

https://images.aaronequipment.com/ItemImages/Tanks/Stainless-0-499-Gal/Alloy-Products_42948001_a.jpg
Submit Offer $500 View

Stock No.:

42948001

Used Alloy Products 5-Gallon 316L Stainless Steel Pressure Tank – 135 PSI, Vertical

Used- Alloy Products Pressure Tank, Approximately 5 Gallon, 316L Stainless Steel, Vertical. 9' Diameter x 14" straight side. Dished top and bottom. Polished internal rated 135 psi at 20 to 135 degress F. Openings top (2) 7/8, (2) 3/8, 5 x 6 oval, no cover. Rubber skirt mounted.

MFR: Alloy Products

https://images.aaronequipment.com/ItemImages/Mixers/Disperser-Mixer/Mooney_43205001_a.jpg
Submit Offer $3,500 View

Stock No.:

43205001

Used Mooney Slow-Speed Disperser – 5 HP, 18” Bowtie Blade, Air/Oil Lift

Used- Mooney Slow Speed Disperser. 1-1/2" Diameter x 48" long shaft with a 18" diameter bowtie blade. Driven by a 5hp, 3/60/230/460 volt, 1730 rpm motor. Manual speed control, air/oil lift. Pedestal mounted.

MFR: Mooney

https://images.aaronequipment.com/ItemImages/Kettles/Stainless-Steel-0-499-Gallon/Lee-Ind_11059338_aa.jpg
View

Stock No.:

11059338

Lee Jacketed Mix Kettle

Used- Lee 5 Gallon (20L) Jacketed Mix Kettle with Scraper Blades. Internal rated 20 PSI at 332 Degrees F. Jacket rated 90 PSI @ 332 Degrees F. No motor included. Unit has tilt out mixer, air actuator assist needs to be replaced.

MFR: Lee Ind

https://images.aaronequipment.com/ItemImages/Plastics-Equipment/Size-Reduction-Grinders-and-Granulators/Cumberland-1456i_10755185_aa.jpg
View

Stock No.:

10755185

Used Cumberland 1456i Granulator – 75 HP Twin Shear Rotor with 68" Pull Rolls

Used- Cumberland Granulator, Model 1456i. 14" x 56" feed throat. Three (3) knife twin shear rotor with two (2) bed knifes. Rotor is belt driven by a 75 HP, 3/60/460 Volt motor. 68" wide in feed pull rolls with 5 HP D/C motor. Feed rolls are pneumatically actuated. Upper and lower feed rolls are poly covered. Pull roll hopper only. No controls included.

MFR: Cumberland

https://images.aaronequipment.com/ItemImages/Mixers/Paddle-Mixer/Phlauer-AJSP141-6DDPSW_10128102_aa.jpg
View

Stock No.:

10128102

Used Phlauer AJSP141-6DDPSW Twin Shaft Paddle Blender | 5 Cu Ft Stainless Steel Mixer

Used- Phlauer model AJSP141-6DDPSW twin shaft paddle blender with a side entering chopper, 5 cubic foot capacity. Stainless steel construction. The twin shaft paddle blender has a 1.5 hp drive on each shaft and the chopper is driven by a 3 hp motor. This unit is equipped with a small dosing tank with spray nozzles. The pipe to the spray nozzles is threaded brass but should be easy to replace with stainless fittings if necessary. The control panel is mounted at one end with a VFD. It is all mounted on a stand with casters for mobility. This unit requires 600 vac 3 ph and includes a 480 to 600 vac step up transformer. Overall dimensions are 80" wide x 52" long x 48" tall. Serial number 99110.

MFR: Phlauer

https://images.aaronequipment.com/ItemImages/Mixers/Disperser-Mixer/K-and-H-Manufacturing_50556015_aa.jpg
Submit Offer $4,500 View

Stock No.:

50556015

Used K & H Manufacturing Post-Type Mixer – 5 HP, Manual Height Adjustment

Used- K & H Manufacturing Post-Type Mixer. Shaft measures 1-1/2" diameter with 6" diameter housing. Housing includes (2) paddle blades with one blade measuring 18" long x 1-1/2" wide extending from bottom of housing. Mounted on frame with manual height adjustment. Driven by 5 hp, 220/440 V, 1200 rpm, 3/60Hz motor. Previously used at paint processing facility. Good condition.

MFR: K & H Manufacturing

https://images.aaronequipment.com/ItemImages/Mixers/Homogenizer-Mixers/3H_51891001_aa.jpg
Submit Offer $6,500 View

Stock No.:

51891001

Used Gifford Wood Model 3H-71 High Shear Homogenizer – 5 HP, 316 SS, XP Motor

Used Gifford Wood Model 3H-71 High Shear/ Homogenizer/ Disperser/ Emulsifier. Mixer is 316 stainless steel and includes stand with hydraulic jack for placement inside mixing vessel. Driven by 5 HP, 230/460 Volt, 3505 RPM, UL Explosion Proof (XP) Motor. Shaft size is 1-3/16" diameter X 46" long with 3-7/8" diameter homogenizing head. Stand includes Westward 8-Ton Hoist with manual hydraulic jack.

https://images.aaronequipment.com/ItemImages/Mills/Hammer-Mill/Entoleter-ECM_52283012_aa.jpg
Submit Offer $5,500 View

Stock No.:

52283012

Buy Used Entoleter ECM Impact Mill – High-Speed Pulverizer, 3600 RPM

Used- Entoleter Centrimil Impact Mill, Model ECM. Carbon steel construction. Includes 16" diameter rotor with 3/8" diameter pins and 2-part rotating disc. Includes 8" X 3-1/2" top infeed and 6" diameter center bottom discharge. Driven by 5 HP, 220/440V, 3-phase, 60 Hz, 3600 RPM motor. Mounted on a frame. Catalog# 110778-20, Serial# 3931.

MFR: Entoleter

https://images.aaronequipment.com/ItemImages/Mills/Hammer-Mill/Quadro-194_54499001_aa.jpg
View

Stock No.:

54499001

Used Quadro Comil Model 194 Cone Mill | 5 HP Pharmaceutical & Food Milling System

Used- Quadro Comil, Model 194. Rated up to 2400 lbs/hour (dependent on wet/dry and product size). 6" inlet, 10" outlet diameter. 5HP. Built 2001. Previously used for food products.

MFR: Quadro

https://images.aaronequipment.com/ItemImages/Fork-Lifts-Lift-Trucks/Fork-Lifts-Lift-Trucks/Hyster-H110FT_54433001_aa.jpeg
View

Stock No.:

54433001

Used Hyster H110FT Forklift – 10,250 lb Capacity Diesel Lift Truck with Side Shift & Fork Positioner (2014)

Used- Hyster Fork Lift, Model H110FT. Rated up to 10,250 lb lift capacity. With Cascade sideshifting fork positioner. 48'' Forks. Operates with Ultra-Low Sulfur diesel fuel. Reported to have 14,300 hours. Serial #S005V03693M, built 2014.

MFR: Hyster

https://images.aaronequipment.com/ItemImages/Air-Conditioners/Air-Conditioners/ISRTU1-I75-15-5T_54428004_aa.jpg
View

Stock No.:

54428004

Unused Inspire Canopy Series 5 Ton Air Conditioner ISRTU1-I.75-15-5T – Compact Commercial Rooftop HVAC Unit (2023)

Unused- Inspire Canopy Series Air Conditioner, Model ISRTU1-I.75-15-5T. Rated 5 nominal tons. 3/60/460 Built 2023.

https://images.aaronequipment.com/ItemImages/Air-Conditioners/Air-Conditioners/ISRTU1-I75-15-5T_54428005_aa.jpg
View

Stock No.:

54428005

Unused Inspire Canopy 5 Ton Rooftop HVAC Unit – Compact 460V Commercial Air Conditioning System (2023)

Unused Inspire Canopy 5 Ton Rooftop HVAC Unit Compact 460V Commercial Air Conditioning System, Model ISRTU1-I.75-15-5T. Rated 5 nominal tons. 3/60/460Built 2023

Recently reduced items

https://images.aaronequipment.com/ItemImages/Mixers/Paddle-Mixer/Paul-O-Abbe_52919007_aa.jpeg
Submit Offer $5,190 View

Stock No.:

52919007

Used Paul O Abbe Stainless Steel Fluidizer – 0.7 Cu Ft for Sale

Used- Paul O Abbe Fluidizer, Stainless Steel. Approximate 0.7 cubic feet, 20 liter. Non jacketed trough, 16" wide x 18-1/2" long x 18-1/2" deep. (2) 1-1/2" diameter x 15" long shafts, each have (14) 3" long x 3" wide x 1/8" thick paddles on 1/2" diameter posts. Driven by (2) .33hp, 3/60/230/460 volt, 1700rpm motors, through a reducer 8:1. Bottom bombay doors. 9-1/2" Diameter bottom discharge, 20" discharge height. Includes mounted control panel. Mounted on (4) casters. Serial# A45254.

MFR: Paul O Abbe

https://images.aaronequipment.com/ItemImages/Dryers-Drying-Equipment/Rotary-Hot-Air/Summerlot_52919005_aa.jpg
View

Stock No.:

52919005

Used Summerlot Engineered Products Dryer – 316 Stainless Steel

Used- Summerlot Engineered Products Dryer, 316 Stainless Steel. Cantilevered S/C. 12" long x 6" wide feed hopper, with a 3-3/4" diameter x 48" long screw, 3/4" pitch. Driven by a 1hp, 3/60/208-230/460 volt, 1755 rpm motor. Approximately 10" diameter x 136" long dryer vessel, with (4) fixed baffles. Driven by a 2hp, 3/60/230/460 volt, 1140 rpm motor through reducer, 5.76:1. Approximate 8" diameter discharge with a Flowseal valve. 36" Discharge height. Serial# 88211.

MFR: Summerlot

https://images.aaronequipment.com/ItemImages/Dryers-Drying-Equipment/Oven/PB-1542_50028005_aa.jpg
View

Stock No.:

50028005

Unused JBT Foodtech FORMCOOK Progrill Contact Cooker – Model PB-1542 Electric ProBake

Unused- JBT Foodtech FORMCOOK Progrill Contact Cooker. Model PB-1542 Electric ProBake. With 10 Degree Incline and Top Belt. Overall Belt Width 60". Usable Belt Width 59", Cooking Length 13.78'. Seven Lower Electric Platens, Upper and Lower Teflon Style Belting. Electrical Specifications 460/3/60 (110/1/60), Electric Drive, Basic Belt Cleaning System, Digital Read-out System, 12" Out-feed Conveyor, Standard Exhaust Fan. Controllogix Processor disconnects on all motors. HMI Screen A. Platens 3/60/460 / 1/60/110 Electric Drive.

https://images.aaronequipment.com/ItemImages/Pumps/Stainless-Centrifugal/APV-Crepaco-W20-20_53011006_aa.jpeg
Submit Offer $2,375 View

Stock No.:

53011006

High-Efficiency APV Crepaco W20/20 Pump – 105 GPM, 3500 RPM

High-Efficiency APV Crepaco W20/20 Pump 105 GPM, 3500 RPM. Approximate 105 gallons per minute, 95 head feet @ 3500 rpm. Approximate 2" inlet, 2" outlet. Driven by a 5hp, 3/60/230/460 volt, 3500 rpm motor. Serial# H-9296-95.

MFR: APV/Crepaco

Explore our guides.

Enhance your equipment knowledge with our resources.

April 7, 2026

Everything You Should Know Before Buying Used Cannabis Equipment

The cannabis industry has been booming, and with this growth comes the need for efficient and cost-effective manufacturing solutions.

Cannabis Industry Blog

April 7, 2026

Everything You Should Know Before Buying A Used Stainless Steel Tank

What do you need to know before buying a stainless-steel tank?

Tanks Blog

April 7, 2026

Everything You Should Know Before Buying A Used Roll Compactor

Industrial roll compactors play a vital role in material compaction across various industries.

Used Equipment Blog

Sell Equipment

Have surplus equipment? We offer flexible options including direct purchase, consignment, or listing on our marketplace — all backed by trusted professionals.

Learn about selling

Buy Used Equipment

Discover one of the world’s largest inventories of used processing and packaging equipment — ready to ship and backed by decades of industry expertise.

Browse all equipment

Auctions

Join global buyers and sellers at AIS-hosted auctions featuring top-quality surplus equipment from leading facilities around the world.

View current auctions