CALL 630-350-2200
View All Equipment Auctions OEM & New Equipment
Appraisals Equipment Reconditioning Asset Management Plant Liquidation Financing
Company Overview Meet Our Team Locations & Contact

Explore our extensive equipment marketplace

Discover a wide range of used processing and packaging machinery tailored to meet your industry needs. Use our advanced search features to find the perfect equipment quickly and efficiently.

Recently added products

https://images.aaronequipment.com/ItemImages/Dryers-Drying-Equipment/Drum-Dryers/Escher-Wyss-WS-2359_41174072_aa.png
View

Stock No.:

41174072

Used Escher Wyss ZW 2350 Double Drum Dryer | 1,000 kg/hr | Industrial Drum Drying System

Used Escher Wyss ZW 2350 Double Drum Dryer | 1,000 kg/hr | Industrial Drum Drying System. Capacity 1000 Kgs/Hr (2200 Lbs/Hr) 1500 mm (58.5") dia x 2500 mm (97.5") st. side drums. 26 RPM drum speed. Heating pressure 8 bar (120 PSI), Heating steam pressure 4 bar (60 PSI). Complete with (1) Blower, (1) Dust collector, Sifter/5 Station sack filling unit and additional infrastructure. Previously skimmed milk concentrated with 45% dry matter content. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Escher Wyss

https://images.aaronequipment.com/ItemImages/Tanks/Stainless-5000-Gal-and-up/Unknown_13075038_aa.jpg
View

Stock No.:

13075038

Stainless Steel Tank 5,800 Gallons with Agitation

Used- Stainless Steel Tank 5,800 Gallons with Agitation. Overall approx 19'H x 9' dia Approx Vessel Dimensions: 13'T X 105". Approx Vessel Capacity: 5,800 Gallons.

MFR: Unknown

https://images.aaronequipment.com/ItemImages/Blanchers-Cookers/Blanchers-Cookers/Dodman-Ltd_50295002_aa.jpg
View

Stock No.:

50295002

Used Dodman Ltd. Model DST 010 Rotary Drum Blanching System

Used- Dodman Ltd. Model DST 010 Rotary Drum Blanching System. Consisting of: (1) Dodman Ltd. rotary drum rehydration blancher. Type DST 010, Stainless steel construction. Includes water regulating pump and manifold. On 4 legs. Overall dimensions: 7' 5" width x 18'5" long x 9'1" high (2300 mm width x 5700 mm long x 2800 mm high). (1) Dodman Ltd. rotary drum chiller, Type FPM 632, Stainless steel construction. 59" diameter x 124" straight side (1800 mm diameter x 3800 straight side) chilling drum. Includes water regulating pump and manifold. On 4 legs. New 1996. Overall dimensions: 78" width x 124" long x 85" high (2400 mm width x 3800 mm long x 2600 mm high). (3) Locker rectangle in/outfeed screens/sifters, stainless steel construction. 1400 rpm. Frame mounted on 4 legs. Previous used on vegetables. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible

MFR: Dodman Ltd.

https://images.aaronequipment.com/ItemImages/Centrifuges/Decanter/Sharples-P-660_50058011_aa.jpg
View

Stock No.:

50058011

Used Sharples P-660 Super-D-Canter Centrifuge | 6000 RPM | New Motors & PLC Panel | Stainless Steel | 1-Year Warranty

Used Sharples P-660 Super-D-Canter Centrifuge | 6000 RPM | New Motors & PLC Panel | 1-Year Warranty, stainless steel construction (product contact areas, max bowl speed 6000 rpm, single lead conveyor w/welded hardfacing wear protection, base, casing, feed pipe, 95:1 planetary gearbox, (New) 10 HP Main Drive motor, (New) 5 hp backdrive motor, mounted plate w/ vibration Isolations. Mounted on approx. 4 stainless steel stand w/casters, safety guards, (New) programable logic control/drive panel. (Reconditioned with warranty)

MFR: Sharples

https://images.aaronequipment.com/ItemImages/Columns/Columns/Unknown_50467009_aa.jpg
Submit Offer $1,500 View

Stock No.:

50467009

Buy Used 6" PFA Jacketed Column – Heat Transfer & Corrosion Protection

Used- 6" PFA lined column, jacketed.

MFR: Unknown

https://images.aaronequipment.com/ItemImages/Mills/2-Roll-Mill/Stewart-Bolling-6-x-12-_51065016_aa.jpg
Submit Offer $6,750 View

Stock No.:

51065016

Used Stewart Bolling 6" x 12" Two Roll Mill – Industrial Rubber & Plastics Processing

Used- Stewart Bolling 6" x 12" Pilot Two Roll Mill. Approximate 6" diameter x 12" long chrome cored rolls. Driven by 5 hp, 3/60/220/440 volt gear motor, single speed, fixed gear ratio. Unit has front and back knee safeties, and over the roll safety cage. Two point manual adjustment, split end guides. Serial# 2560.

MFR: Stewart Bolling

https://images.aaronequipment.com/ItemImages/Mills/Sand-Media/Unknown_50556009_aa.jpg
Submit Offer $3,500 View

Stock No.:

50556009

Used - Paint Media Mill, 8" x 30" Milling Chamber, 6 Gallon, 10 HP Motor

Used- Paint Media Mill. includes 8" diameter X 30" high milling chamber, approximate 6 gallon. Stainless Steel screening section, jacketed chamber. Driven by 10 HP, 220/440 V, 1740 RPM, 3-phase, 60 cycle motor. Previously used at paint processing facility and in working condition when removed from service. No Manufacturers Tag.

MFR: Unknown

https://images.aaronequipment.com/ItemImages/Centrifuges/Decanter/Sharples-P660_14191145_aa.jpg
View

Stock No.:

14191145

Used Sharples P-660 Decanter Centrifuge | 6000 RPM | Stainless Steel | 7.5 HP Main Drive | Mounted w/ Vibration Isolation

Used Sharples P-660 Decanter Centrifuge | 6000 RPM | Stainless Steel | 7.5 HP Main Drive | Mounted w/ Vibration Isolation. Stainless Steel. Main drive motor 7.5 hp 3/60/230-460 volts, fixed speed. Backdrive motor2 hp 3/60/208 230-460 volts fixed speed. 6000 rpm max speed, 95:1 gearbox. Mounted on table with vibration isolators.

MFR: Sharples

https://images.aaronequipment.com/ItemImages/Kettles/Stainless-Steel-0-499-Gallon/Vulcan-K6ETT_409352_aa.jpg
Submit Offer $5,000 View

Stock No.:

409352

Pre-Owned Vulcan K6ETT Electric Counter Kettle | 6 Gal | 50 PSI

Used Vulcan-Hart Model K6ETT Electric Counter Tilting Kettle, 6 Gallon Capacity. Approximately 11.8" Diameter x 14-1/2" deep. Ellipsoidal bottom. 2/3 Jacketed rated 50psi at -20 to 300 degrees F. Frame mounted. National board# 21596, Serial# 46-3002235, Built 2011. 3/1PH 50/60HZ 8/10KW 208/240V requirements.

MFR: Vulcan

https://images.aaronequipment.com/ItemImages/Mixers/Plow-Mixer/Lodige-FKM600D_47890001_aa.jpg
Submit Offer $7,220 View

Stock No.:

47890001

Lodige FKM600D Plow Mixer

Used- Lodige Batch Type Plow Mixer, Model FKM600D. 6 Cubic Feet Working Capacity (10 Total), 304 Stainless Steel. Non-jacketed mixing chamber approximate 32" diameter x 50" long. 4" Diameter shaft with (3) bolt on plows and (2) bolt on end scrappers. (2) Approximate 18" x 15-1/2" side access doors. Top openings (2) 12". 9" x 7" Bottom outlet with a manual operated door, air purge seals. Driven by an approximate 10 hp motor thru Falk reducer. Includes a control panel with an Allen-Bradley PanelView 600 and a SLC 5/04 CPU. Mounted on a carbon steel stand. Serial # 9046.

MFR: Lodige

https://images.aaronequipment.com/ItemImages/Plastics-Equipment/Extruders-Single-Screw-Extruder/Davis-Standard-Thermatic_54506008_aa.jpg
View

Stock No.:

54506008

Used & Reconditioned Davis-Standard Thermatic 60IN60 6" Single Screw Extruder – 400 HP, 24:1 L/D, Thermatic Clamp

Used & Reconditioned Davis-Standard Thermatic 60IN60 6" Single Screw Extruder 400 HP, 24:1 L/D, Thermatic Clamp. 24:1 L/D ratio, water-cooled barrel, integrated water reservoir, recirculation pump, and heat exchanger. Equipped with a 17.21:1 gearbox rated for 424 HP capacity with a 1.5 service factor, powered by a new 400 HP TECO AC motor (Model EPS4004, 1,800 RPM, 449TX frame) and new TECO AC drive (Model EQ7-4450-C). Includes five barrel heating zones and six die heating zones with new Novus temperature controllers and amp gauges, swing-arm operator station with speed pod, pressure and screw speed gauges, and a 42" centerline height. Fitted with a Thermatic clamp and barrier flight screw; screw and barrel are within serviceable tolerances. Heater bands have been electrically tested, barrel plumbing and heat exchangers have been flow checked, and five new Red Hat solenoid valves have been installed. Approximate overall dimensions are 216" L x 80" W x 90" H. Originally built 2004.

MFR: Davis Standard

https://images.aaronequipment.com/ItemImages/Plastics-Equipment/Extruders-Single-Screw-Extruder/Davis-Standard-60IN60TPIH_54506009_aa.jpg
View

Stock No.:

54506009

Used Davis-Standard 60IN60TPIH 6" Single Screw Extruder – 34:1 L/D, 400 HP, Vented Barrel with ABB Drive

Used Davis-Standard 60IN60TPIH 6" Single Screw Extruder 34:1 L/D, 400 HP, Vented Barrel with ABB Drive. Features a 34:1 L/D ratio with a water-cooled, vented barrel incorporating six cooling zones; vent is located approximately 130" from the center of the feed throat and is currently plugged. Cooling system includes a 1/2 HP recirculation pump, heat exchanger, and 32" x 24" x 12" water reservoir. Driven by a 400 HP WEG AC motor (1,790 RPM) with ABB AC drive and a Davis-Standard Model 60IN60TPIH gearbox featuring a 17.2:1 ratio and rated for 526 HP with a 1.5 service factor. Temperature controls include six-barrel zone Solo 4896 controllers and seven die zone Omron E5EC controllers. Operator controls feature a speed pod with screw RPM, motor load percentage, and pressure transducer gauges. Includes hopper, 42" centerline height, and serial number PT238. Approximate footprint is 25' L x 8' W. Built 1994.

MFR: Davis Standard

Recently reduced items

https://images.aaronequipment.com/ItemImages/Mixers/Paddle-Mixer/Paul-O-Abbe_52919007_aa.jpeg
Submit Offer $5,190 View

Stock No.:

52919007

Used Paul O Abbe Stainless Steel Fluidizer – 0.7 Cu Ft for Sale

Used- Paul O Abbe Fluidizer, Stainless Steel. Approximate 0.7 cubic feet, 20 liter. Non jacketed trough, 16" wide x 18-1/2" long x 18-1/2" deep. (2) 1-1/2" diameter x 15" long shafts, each have (14) 3" long x 3" wide x 1/8" thick paddles on 1/2" diameter posts. Driven by (2) .33hp, 3/60/230/460 volt, 1700rpm motors, through a reducer 8:1. Bottom bombay doors. 9-1/2" Diameter bottom discharge, 20" discharge height. Includes mounted control panel. Mounted on (4) casters. Serial# A45254.

MFR: Paul O Abbe

https://images.aaronequipment.com/ItemImages/Dryers-Drying-Equipment/Rotary-Hot-Air/Summerlot_52919005_aa.jpg
View

Stock No.:

52919005

Used Summerlot Engineered Products Dryer – 316 Stainless Steel

Used- Summerlot Engineered Products Dryer, 316 Stainless Steel. Cantilevered S/C. 12" long x 6" wide feed hopper, with a 3-3/4" diameter x 48" long screw, 3/4" pitch. Driven by a 1hp, 3/60/208-230/460 volt, 1755 rpm motor. Approximately 10" diameter x 136" long dryer vessel, with (4) fixed baffles. Driven by a 2hp, 3/60/230/460 volt, 1140 rpm motor through reducer, 5.76:1. Approximate 8" diameter discharge with a Flowseal valve. 36" Discharge height. Serial# 88211.

MFR: Summerlot

https://images.aaronequipment.com/ItemImages/Tanks/Stainless-1000-4999-Gal/Vendome-Copper-and-Brass_10128097_aa.jpg
View

Stock No.:

10128097

1,000 gallon Vendome stainless steel processor with dual agitation.

1,000 gallon Vendome stainless steel processor with dual agitation. The bottom and the sides are jacketed. The dimple jackets are rated at 100 psi @ 338F. This unit is equipped with side scrape agitation (5 hp) and a 50 hp top entering homogenizing mixer. 230/460 vac 3 ph electric power required. There is one adjustable baffel inside. The vessel is 72" diameter x 60" straight side with a dished top and bottom. Bottom jacket nozzles are two- 2" RFSO flanges. Side jacket has four-2" RFSO flanges as in/out flanges. Bottom has one 3"tri-clamp nozzle. Top has one- 18" hinged lid manway, one 6" x 18" rectangular inlet, one 6" tri-clamp nozzle, one- 4" sightglass, three-3" nozzles, five- 2" nozzles, and one 1" nozzle. This unit stands on 4 stainless steel pipe legs. National board #299. The skin over the jacket has some dents and repairs. The jackets passed our hydro tests. Built in March 2004.

MFR: Vendome Copper & Brass

https://images.aaronequipment.com/ItemImages/Dryers-Drying-Equipment/Oven/PB-1542_50028005_aa.jpg
View

Stock No.:

50028005

Unused JBT Foodtech FORMCOOK Progrill Contact Cooker – Model PB-1542 Electric ProBake

Unused- JBT Foodtech FORMCOOK Progrill Contact Cooker. Model PB-1542 Electric ProBake. With 10 Degree Incline and Top Belt. Overall Belt Width 60". Usable Belt Width 59", Cooking Length 13.78'. Seven Lower Electric Platens, Upper and Lower Teflon Style Belting. Electrical Specifications 460/3/60 (110/1/60), Electric Drive, Basic Belt Cleaning System, Digital Read-out System, 12" Out-feed Conveyor, Standard Exhaust Fan. Controllogix Processor disconnects on all motors. HMI Screen A. Platens 3/60/460 / 1/60/110 Electric Drive.

Explore our guides.

Enhance your equipment knowledge with our resources.

April 7, 2026

Everything You Should Know Before Buying Used Cannabis Equipment

The cannabis industry has been booming, and with this growth comes the need for efficient and cost-effective manufacturing solutions.

Cannabis Industry Blog

April 7, 2026

Everything You Should Know Before Buying A Used Stainless Steel Tank

What do you need to know before buying a stainless-steel tank?

Tanks Blog

April 7, 2026

Everything You Should Know Before Buying A Used Roll Compactor

Industrial roll compactors play a vital role in material compaction across various industries.

Used Equipment Blog

Sell Equipment

Have surplus equipment? We offer flexible options including direct purchase, consignment, or listing on our marketplace — all backed by trusted professionals.

Learn about selling

Buy Used Equipment

Discover one of the world’s largest inventories of used processing and packaging equipment — ready to ship and backed by decades of industry expertise.

Browse all equipment

Auctions

Join global buyers and sellers at AIS-hosted auctions featuring top-quality surplus equipment from leading facilities around the world.

View current auctions