August 20, 2026
Guide to Equipment Photography for Faster Sales
Learn equipment photography tips that can help sell used machinery faster, including 360° photos, clean backgrounds, spec tags, lighting, and image quality.
Discover a wide range of used processing and packaging machinery tailored to meet your industry needs. Use our advanced search features to find the perfect equipment quickly and efficiently.
Cannabis Equipment
5 subcategories
Dryers - Drying Equipment
13 subcategories
Mills
10 subcategories
Packaging Equipment
229 subcategories
71 Categories
751 Manufacturers
Browse all equipmentStock No.:
73301001Used- Cousins Automatic Stretch Wrapper, Model Titan 4100-35-FA. Rated up to 35 loads/hour; 50" L x 50" W x 86" H max. load size; 24" W x 24" L x 24" H min. load size; Double flange bearing support system; Twin V-belt drive pulleys with belt tensioner; Super Rapid Thread 20" capacity pre-stretch film carriage; Special film threading device; 33-313% fixed stretch capability; 1-12 RPM rotational speed c/w soft start acceleration; 1/2 HP DC variable speed motor; Panasonic PLC. 1/60/115V.
MFR: Cousins
Stock No.:
73299001Used- Douglas Axiom Wraparound Case/Tray Packer. Capable of speeds up to 46 cycles per minute (Depending on application). Inside case dimensions: 4.4" - 8.8" (direction of travel) x 8.8" - 13.2" (across machine) x 2.5" - 5.16" (height). 3/60/480V. Last running cups with 115mm (4.5 inch) diameter rim, 24oz was 4 inch tall, 32oz was 5.5 inch tall, 2ct and 6ct packages possible.
MFR: Douglas Machine
Stock No.:
10151488Used- Rubicon Shell/Tube Heat Exchanger, Model VT221B1-216V. 1,554 square feet surface area; Stainless Steel; National Board #2105; Serial #3472-2; 150 psi @ 200F shell MAWP; 200/FV @ 200F tubes MAWP; carbon steel shell material; 304 stainless steel tubes material; OAD: 26" dia. x 216" long; Additional information: (577) 0.75" x 168" long 304 stainless steel tubes, vertical design. Built 2008.
MFR: Rubicon
Stock No.:
73298001Used- Ohlson Bucket Combination Scale, Model MHW-CW14. Capable of speeds up to 140 weighments/minute; 14 heads; Stainless steel construction; 25-500g weigh range; 500mL/1300mL/2500mL capacity. 2 kW input power; 50/60220V. Built 2014. Spare parts included. Mezzanine NOT INCLUDED.
MFR: Ohlson
Stock No.:
53547003Used- Forward Waters Technologies Corp, (FWTC) Forward Osmosis Water Treatment System. Unique and patented industrial FO (iFO) technology, utilizing their revolutionary three Step process, achieving high-rate water extraction within a low energy continuous process. The (3) three step process developed by Forward Water Technologies, enables iFO systems to achieve maximum water extraction from the most challenging process streams, using minimum energy with one of the lowest life cycle costs. Leveraging developments in chemistry, material sciences and best-in-class operations, FWTC offers the most advanced and efficient industrial forward osmosis systems available today. Forward Osmosis (FO) is a natural membrane process found in nature capable of extracting pure water from impure sources. Unlike Reverse Osmosis (RO), which uses hydraulic pressure to drive water across a semi-permeable membrane, FO uses a draw" solution to draw water across it. FO spontaneously draws water across a membrane whenever one solution is higher in salt concentration or solute (draw solution) than another (feed solution). The difference in salt concentration between solutions is known as the osmotic gradient and is the free and natural energy responsible in powering the water extraction process. 480V AC/60Hz, 3PH. Includes Gardner Denver 100SCFM air compressor; Temptex CF Series chiller; Control System, and electrical panel. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
Stock No.:
53147054Used- Insta-Pro Model 2000 RC Continuous Extruder. Rated capacity approximate 1,300 - 3,840 pounds per hour. Includes extruder barrel and main worm shaft assembly. Driven by 125 HP motor.
MFR: Insta-Pro
Stock No.:
53147053Used Insta-Pro Model 2000 Continuous Expeller Press-Used. 7.2:1 cage-length-to-cage-diameter ratio, equipped with a vertical screw feed. Equipped with a 30 HP main drive and 3 HP feed drive. Designed for mechanical oil extraction from oil seeds such as soybeans, canola, and sunflower seeds. This unit includes a belt-driven drive.
MFR: Insta-Pro
Stock No.:
53147051Used- Anderson Dahlen Stainless Steel Dual Screw Holoflite Dryer, 24" diameter X 20' long. Constructed from 316L stainless steel. Screws and jacket are rated for 100 PSI/FV @ 350 degrees / -20 degrees Fahrenheit. Previously used to dehydrate food waste. Previously heated by hot oil. ASME code built.
MFR: Anderson Dahlen
Stock No.:
45984007Used- Praxair Model JE-U4-940-HC CO2 Straight Tunnel Freezer. 40" wide x 9' long freeze zone. Electrical 4 HP, 3 phase, 230 Volt, 16 Amps. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
MFR: Praxair Inc
Stock No.:
53642001Used- Lot of (8) Evapco Eco-ATWB 24-4N20 Closed Circuit Cooling Towers. Approximately 600 ton each. Each approximate 2,800 GPM. (2) 40hp fans, approximate 281,190 CFM. Coil volume 5,107 liters (1349 gallon). (2) 40HP fans. Setup as (2) cell units. Seller would like to sell all 8 units at one time, however, will accept offers. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
MFR: Evapco
Stock No.:
73293001Used MBC Aerosol Rotary gasser with MBC Aerosol 6-head Rotary Valve Crimper. Gasser is capable of operating with carbon dioxide (CO2), nitrogen, or compressed air. Machine is equipped with an Allen Bradley MicroLogix 1400 PLC, Allen Bradley PanelView Plus 700 HMI, and (3) Allen Bradley PowerFlex 4M drives. Previously ran 20 oz cooking spray in aerosol cans using CO2. Electrical requirements are 3-phase, 60 Hz, 460 volt. Like-new condition. Serial number 100608-1. Possible applications include aerosol gassing and valve crimping for products such as cooking sprays and other compatible aerosol-packaged products using CO2, nitrogen, or compressed air.
Stock No.:
53267059Used- Sistersville Tank Works Incorporated Shell and Tube Heat Exchanger. Approximately 745 square foot 316L stainless steel 20" diameter X 20' face to face length. 316L SS shell side rated 150 PSI @ 20 to 320 degrees F. (190) 3/4" 316L SS tubes rated 150 PSI @ 20 to 305 degrees F. 3" Process nozzles with 1" vent and drain. 3" service nozzles. NB# 3879, S/N: 06- 290. Built 2007. Weight 6150#. Missing one head
MFR: Sisterville Tank Works
Stock No.:
54654001Unused KWS Manufacturing Industrial Screw Conveyor Bulk Material Handling System. Consists of: 12" and 14" diameter x 72' long carbon steel screw conveyor sections with horizontal and inclined conveying sections; Structural support framing; Motors and drive components; and loose installation parts. 13' discharge height. Variable screw speed. Built 2023.
MFR: KWS
Stock No.:
50800067Used Feldmeier 7,000-Gallon Type 304L Stainless Steel Food-Grade Storage Tank. 112" Inner Diameter x 13'9" Straight Side. Single Wall, sloping bottom. Side manway. Previously used in a food application. 198" Overall Height.
MFR: Feldmeier
Stock No.:
73713001Used- WeighPack VersaPak Vertical Form Fill Seal (VFFS) Semi-Automatic Bagging Machine, Stainless steel construction. Rated up to 20 pouches/minute. 2-8" bag width range. 2-12" bag length range. 6" forming tube currently configured for approximately 6" x 8" and 6" x 12" pillow bags. Features foot pedal cycle activation, 7" color touchscreen, eye-mark sensor, pneumatic film-roll shaft, constant-heat vertical and horizontal sealing systems, motorized film-pull belts, safety-interlocked access doors. Mounted on a 304 stainless steel frame with casters. 1/60/120V. Serial #VE25001. Built 2025. Previously used for dry popcorn.
MFR: Weighpack Systems
Explore our guides.
Enhance your equipment knowledge with our resources.
August 20, 2026
Guide to Equipment Photography for Faster Sales
Learn equipment photography tips that can help sell used machinery faster, including 360° photos, clean backgrounds, spec tags, lighting, and image quality.
April 7, 2026
Everything You Should Know Before Buying Used Cannabis Equipment
The cannabis industry has been booming, and with this growth comes the need for efficient and cost-effective manufacturing solutions.
April 7, 2026
Everything You Should Know Before Buying A Used Stainless Steel Tank
What do you need to know before buying a stainless-steel tank?
Sell Equipment
Have surplus equipment? We offer flexible options including direct purchase, consignment, or listing on our marketplace — all backed by trusted professionals.
Buy Used Equipment
Discover one of the world’s largest inventories of used processing and packaging equipment — ready to ship and backed by decades of industry expertise.
Auctions
Join global buyers and sellers at AIS-hosted auctions featuring top-quality surplus equipment from leading facilities around the world.