CALL 630-350-2200
View All Equipment Auctions OEM & New Equipment
Appraisals Equipment Reconditioning Asset Management Plant Liquidation Financing Centrifuge Parts & Services
Company Overview Meet Our Team Locations & Contact

Explore our extensive equipment marketplace

Discover a wide range of used processing and packaging machinery tailored to meet your industry needs. Use our advanced search features to find the perfect equipment quickly and efficiently.

Recently added products

Clear
https://images.aaronequipment.com/ItemImages/Mixers/Homogenizer-Mixers/FDD-611_52038002_aa.jpg
Submit Offer $5,500 View

Stock No.:

52038002

Used CB Mills Batchranger Disperser – 20 HP, Air Tilt, Hoist Mounted

Used- CB Mills Batchranger Stand-Alone Hoist Mounted Disperser, Model FDD-611. Air operated tilt. Enclosed shear grid/stator and high pressure impeller. Driven by a 20hp, 3/60/230/460 volt, 1755 rpm xp motor. Mounted on painted carbon steel hoist. Serial# 2985-0000.

https://images.aaronequipment.com/ItemImages/Mixers/Double-Arm-Mixer/Toshin-TDS75-100_50697011_aa.jpg
View

Stock No.:

50697011

Used Toshin TDS75-100MF Double Arm Dispersion Mixer – 75L Capacity, 100 HP, Stainless Steel. Chewing Gum.

Used- Toshin Double Arm Dispersion Mixer, Model TDS75-100MF, Stainless Steel. 75 Liter (19.8 gallon) working capacity, 150 liter (39.6 gallon) total. Jacketed bowl approximate 22" left to right x 23" front to back x approximately 20" deep rated 213 maximum psi at 302 degrees F. Cored masticator blades, front rotor 27 rpm, rear rotor 23 rpm, geared one end, top air operated pressure cap, air operated dust hood, motorized bowl screw tilt with a 2.2kw motor. Mixer driven by a 75kw (100hp), 3/60/480 volt, 1760 rpm motor thru a reducer no ratio. Includes an operator panel and control panel. Mounted on a base. Serial # 916. For Chewing Gum.

MFR: Toshin

https://images.aaronequipment.com/ItemImages/Mixers/Double-Arm-Mixer/Toshin-TDS75-100MF_50697012_aa.jpg
View

Stock No.:

50697012

Used Toshin Co. Double Arm Mixer / Hybrid Kneader - Dispersion Mixer – 75L, 100 HP, Stainless Steel. Chewing Gum.

Used- Toshin Model TDS75-100MF Double Arm Dispersion Mixer, Stainless Steel. 75 Liter (19.8 gallon) working capacity, 150 liter (39.6 gallon) total. Jacketed bowl approximate 22" left to right x 23" front to back x approximately 20" deep rated 213 maximum psi at 302 degrees F. Cored masticator blades, front 27 rpm, rear 23 rpm, geared one end, top air operated pressure cap, air operated dust hood, motorized bowl screw tilt with a 2.2kw motor. Mixer driven by a 75 kw (100 hp), 3/60/480 volt, 1760 rpm motor thru a reducer ratio 20.272 to 1. Includes an operator panel and control panel. Mounted on a base. Serial # 1298. For Chewing Gum.

MFR: Toshin

https://images.aaronequipment.com/ItemImages/Mixers/Homogenizer-Mixers/IKA-Works_54163003_aa.jpg
View

Stock No.:

54163003

Used IKA Works High Shear Mixer / Homogenizer – Stainless Steel, 20 HP

Used- IKA Works Mixer/Homogenizer Model DR 2000/10. Approximately 7-1/2" diameter x 6" deep chamber. Missing internals. Top bolt on cover with 2" diameter tri-clamp opening, 2" side bottom outlet. Driven by a 20hp 3/60/575V, 3537 rpm motor. Mounted Aerni Pressure Vessel, Model AR 139 rated for 26bar (377psi) at -70 to 200 degrees C (-94 to 392 degrees F). No Manufacturers tag, frame mounted.

MFR: IKA Works

https://images.aaronequipment.com/ItemImages/Mixers/Drum-Tumble/54131001_aa.jpg
View

Stock No.:

54131001

Used Yargus Layco Rotary Drum Blender System – 8 Ton Capacity

Used- Yargus Layco Rotary Drum Blender System. 8 ton capacity, 60 lbs per cubic foot; 304 stainless steel construction; Stainless steel drum head; (2) 15,000 lb. trunnion rollers. 20HP electric motor, Nord gearbox. With 304 stainless steel weigh hopper (approx. 144" x 95" ), 12' L x 2' W transfer conveyor, 12' L x 2' W loadout conveyor, and control panel Built 2018. Previously used to blend aggregates.

https://images.aaronequipment.com/ItemImages/Conveyors/Screw-Conveyors/53629001_aa.jpg
View

Stock No.:

53629001

Used 20" Diameter x 15' Long Inclined Auger Conveyor – 3 HP Motor | 480V | Heavy-Duty Industrial Screw Conveyor

Used- 20" Diameter x 15' Long Inclined Auger Conveyor. Driven by a 3 HP, 3/60/480V, 1735 RPM motor.

https://images.aaronequipment.com/ItemImages/Plastics-Equipment/Size-Reduction-Grinders-and-Granulators/Cumberland-584_53482001_aa.jpg
View

Stock No.:

53482001

Cumberland Granulator,

Used- Cumberland Granulator, Model 584. 14" x 20" Feed throat. (3) knife open rotor, (2) Bed knives. Driven by a 20hp, 3/60/230/460 volt, 1755 rpm motor. Set up for bottom blower discharge. hopper with custom front sheet feed, side gravity feed. Bottoms screen with 1/4" diameter holes. Includes control panel and spare 3/8" screen. Serial# 335000-784.

MFR: Cumberland

https://images.aaronequipment.com/ItemImages/Mixers/Double-Arm-Mixer/54390001_aa.jpg
View

Stock No.:

54390001

Used Double Arm Stainless Steel Sigma Mixer – 20 Gallon Jacketed Dough & Paste Mixer with Hydraulic Tilt

Used- Double Arm Stainless Steel Sigma Mixer. Approximate 20 gallon working capacity. Jacketed bowl with electric heaters approximate 23" x 23" x 23" deep bowl, hydraulic tilt, electric hot water tank with recirculating pump, 15kw (20hp), 3/50/380 volt, 1465 rpm gear motor with control panel. NO MANUFACTURERS TAG. Includes unused Maddox 30 kVA 3-Ph Step Up Dry-Type Transformer.

https://images.aaronequipment.com/ItemImages/Chillers/Chillers/Trane-Co-CGAM_54489001_aa.jpg
View

Stock No.:

54489001

Used Trane CGAM 20-Ton Liquid Chiller

Used Trane CGAM 20-Ton High Efficiency Air-Cooled Scroll Liquid Chiller, Model CGAM 020F 2W03 AXD2 A1A1 B1AX XA1C 1A4X XX8B 1A1A 3A1D 1XXC XX. R-410A Refrigerant. Lanced Aluminum Fins. Design pressure high side: 650 psi, low side: 238 psi. (2) 5HP pumps. 3/60/460 Volt. UL Listed. Serial# U21M04243.

MFR: Trane Co

https://images.aaronequipment.com/ItemImages/Compressors/Compressor-Air-Dryer/Quincy-QGD-20_54505001_aa.jpg
View

Stock No.:

54505001

Used Quincy QCD-20 Rotary Screw Air Compressor System with 120 Gallon Tank, Dryer & Oil Water Separator

Used Quincy QCD-20 Rotary Screw Air Compressor System with 120 Gallon Tank, Dryer & Oil Water Separator. Rated 125 psig. 97.2 CFM. 20 HP, 3/60/460V. With SPVG 120 gallon vertical air receiver Tank; Mikropor Model MK-US-125 Digital 125 SCFM air dryer; and Clean Resources Model IDC Pak Series oil water separator. 32,211 hours. Built 2010.

MFR: Quincy

https://images.aaronequipment.com/ItemImages/Dryers-Drying-Equipment/Oven/Blue-M-POM-371-A-2_52325002_aa.jpg
Submit Offer $3,500 View

Stock No.:

52325002

Buy Used Blue M POM-371A-2 Oven – 8.25 Cu Ft, Electrically Heated

Used- Blue M Model POM-371A-2 Oven. 8.25 Cubic feet capacity. Maximum temperature 212 degrees F (100 C). Stainless steel interior, inside dimensions measure 27" wide X 20" high X 24" deep. Electrically heated, rated for 208/240 Volts, Single phase, 60 Hz. B.O.M. NO. E3-00041. Serial# P20-312.

MFR: Blue M

https://images.aaronequipment.com/ItemImages/Heat-Exchangers/Shell-and-Tube-Stainless/Doyle-and-Roth_52862011_aa.jpeg
Submit Offer $6,175 View

Stock No.:

52862011

Used Doyle and Roth Vertical Shell & Tube Heat Exchanger – 20.2 Sq Ft

Used- Doyle and Roth Vertical Shell and Tube Heat Exchanger, Approximate 20.2 Square Feet. Carbon steel shell rated 150 psi / FV at -20 to 200 degrees F. (27) .75" diameter x 48" long Hastelloy C-276 tubes rated 15 psi / FV at -20 to 300 degrees F. Openings: (1) 4", (2) 1", (3) .75". 40,025 BTU/H. Single pass. Baffle spacing 4.125". Side lug mounted. National Board# 20734, Serial# S1989-4, 2008. No bottom head.

MFR: Doyle & Roth

Recently reduced items

https://images.aaronequipment.com/ItemImages/Mixers/Paddle-Mixer/Paul-O-Abbe_52919007_aa.jpeg
Submit Offer $5,190 View

Stock No.:

52919007

Used Paul O Abbe Stainless Steel Fluidizer – 0.7 Cu Ft for Sale

Used- Paul O Abbe Fluidizer, Stainless Steel. Approximate 0.7 cubic feet, 20 liter. Non jacketed trough, 16" wide x 18-1/2" long x 18-1/2" deep. (2) 1-1/2" diameter x 15" long shafts, each have (14) 3" long x 3" wide x 1/8" thick paddles on 1/2" diameter posts. Driven by (2) .33hp, 3/60/230/460 volt, 1700rpm motors, through a reducer 8:1. Bottom bombay doors. 9-1/2" Diameter bottom discharge, 20" discharge height. Includes mounted control panel. Mounted on (4) casters. Serial# A45254.

MFR: Paul O Abbe

https://images.aaronequipment.com/ItemImages/Dryers-Drying-Equipment/Rotary-Hot-Air/Summerlot_52919005_aa.jpg
View

Stock No.:

52919005

Used Summerlot Engineered Products Dryer – 316 Stainless Steel

Used- Summerlot Engineered Products Dryer, 316 Stainless Steel. Cantilevered S/C. 12" long x 6" wide feed hopper, with a 3-3/4" diameter x 48" long screw, 3/4" pitch. Driven by a 1hp, 3/60/208-230/460 volt, 1755 rpm motor. Approximately 10" diameter x 136" long dryer vessel, with (4) fixed baffles. Driven by a 2hp, 3/60/230/460 volt, 1140 rpm motor through reducer, 5.76:1. Approximate 8" diameter discharge with a Flowseal valve. 36" Discharge height. Serial# 88211.

MFR: Summerlot

https://images.aaronequipment.com/ItemImages/Dryers-Drying-Equipment/Oven/PB-1542_50028005_aa.jpg
View

Stock No.:

50028005

Unused JBT Foodtech FORMCOOK Progrill Contact Cooker – Model PB-1542 Electric ProBake

Unused- JBT Foodtech FORMCOOK Progrill Contact Cooker. Model PB-1542 Electric ProBake. With 10 Degree Incline and Top Belt. Overall Belt Width 60". Usable Belt Width 59", Cooking Length 13.78'. Seven Lower Electric Platens, Upper and Lower Teflon Style Belting. Electrical Specifications 460/3/60 (110/1/60), Electric Drive, Basic Belt Cleaning System, Digital Read-out System, 12" Out-feed Conveyor, Standard Exhaust Fan. Controllogix Processor disconnects on all motors. HMI Screen A. Platens 3/60/460 / 1/60/110 Electric Drive.

https://images.aaronequipment.com/ItemImages/Pumps/Stainless-Centrifugal/APV-Crepaco-W20-20_53011006_aa.jpeg
Submit Offer $2,375 View

Stock No.:

53011006

High-Efficiency APV Crepaco W20/20 Pump – 105 GPM, 3500 RPM

High-Efficiency APV Crepaco W20/20 Pump 105 GPM, 3500 RPM. Approximate 105 gallons per minute, 95 head feet @ 3500 rpm. Approximate 2" inlet, 2" outlet. Driven by a 5hp, 3/60/230/460 volt, 3500 rpm motor. Serial# H-9296-95.

MFR: APV/Crepaco

Explore our guides.

Enhance your equipment knowledge with our resources.

August 20, 2026

Guide to Equipment Photography for Faster Sales

Learn equipment photography tips that can help sell used machinery faster, including 360° photos, clean backgrounds, spec tags, lighting, and image quality.

Blog Used Equipment

April 7, 2026

Everything You Should Know Before Buying Used Cannabis Equipment

The cannabis industry has been booming, and with this growth comes the need for efficient and cost-effective manufacturing solutions.

Cannabis Industry Blog

April 7, 2026

Everything You Should Know Before Buying A Used Stainless Steel Tank

What do you need to know before buying a stainless-steel tank?

Tanks Blog

Sell Equipment

Have surplus equipment? We offer flexible options including direct purchase, consignment, or listing on our marketplace — all backed by trusted professionals.

Learn about selling

Buy Used Equipment

Discover one of the world’s largest inventories of used processing and packaging equipment — ready to ship and backed by decades of industry expertise.

Browse all equipment

Auctions

Join global buyers and sellers at AIS-hosted auctions featuring top-quality surplus equipment from leading facilities around the world.

View current auctions