CALL 630-350-2200
View All Equipment Auctions OEM & New Equipment
Appraisals Equipment Reconditioning Asset Management Plant Liquidation Financing Centrifuge Parts & Services
Company Overview Meet Our Team Locations & Contact

Explore our extensive equipment marketplace

Discover a wide range of used processing and packaging machinery tailored to meet your industry needs. Use our advanced search features to find the perfect equipment quickly and efficiently.

Recently added products

Clear
https://images.aaronequipment.com/ItemImages/Plastics-Equipment/Extruders-Single-Screw-Extruder/Gloucester-35250R2_10755151_aa.jpg
View

Stock No.:

10755151

Gloucester Model 35250R2 3.5" Diameter Single Screw Extruder – Industrial Used

Used- Gloucester Model 35250R2 3.5" Diameter Single Screw Extruder. 3.5" diameter screw, 32:1 L/D. Has an electrically heated, air cooled, vented, and plugged barrel at approximately a 65? center line height. Barrel is set up for Contra-Cool but does not include blower. Gearbox has a reduction ratio of 18.17:1 and is direct driven in a wraparound manner by a 100 HP Baldor D/C motor with Saftronics SCR control. One (1) HP pump with heat exchanger on the gearbox. Originally manufactured in 1995 and completely reconditioned in 2011 and never put back into service. All wiring on the extruder is run to a terminal strip. New control panel has fourteen (14) zones of temperature controls. Drive control is loose. Includes three (3) new / rebuilt screws. 460/3/60. Serial# 36736/12.

MFR: Gloucester

https://images.aaronequipment.com/ItemImages/Mixers/Continuous-Mixer/Readco-3-1-2-HVY-DU_11453475_aa.jpg
View

Stock No.:

11453475

3.5" Readco Twin Screw Continuous Processor

Used- 3.5" Readco Twin Screw Continuous Processor, model 3 1/2 HVY DU. Heavy duty design, stainless steel product contact surfaces, jacketed barrel rated 150 psi at 600 f, cored shafts with rotary units, driven by 50 hp, 460 volt motor, machine currently set up with cantilevered screws with adjustable gap ribbon die, with spare set of screw splines set up for end bearing housing, on base. Mfg. 1987.

MFR: Readco

https://images.aaronequipment.com/ItemImages/Plastics-Equipment/Pelletizing-Machinery-Strand-Pelletizers/Conair-304_53713026_aa.jpg
View

Stock No.:

53713026

Used Conair / Jetro Model 304 Strand Pelletizer – 600 lb/hr Plastic Pelletizing

Used Conair / Jetro Model 304 Strand Pelletizer 600 lb/hr Plastic Pelletizing Machine. Approximate capacity up to 600 lbs. per hour (depending on rotor and speed). Approximate 6" diameter x 4" face cutting rotor with 20 fixed blades. Approximate feed opening 3.5". Strand diameter 0.12", upper feed roll 3-1/4" diameter x 3-1/4" face, lower feed roll 1-9/16" diameter x 4" face. Driven by 2hp 3/60/230/460v 1750rpm XP motor. Serial# 6-040894.

MFR: Conair

https://images.aaronequipment.com/ItemImages/Screeners-Sifters/Circular-Screeners/Sweco-LS30S_53713031_aa.jpg
View

Stock No.:

53713031

Sweco LS30S 30 Inch Circular Vibratory Screener - Used Stainless Separator

Used Sweco 30" Diameter Model LS30S Circular Screener, Stainless Steel. Double Deck, 3 separation. Driven by a 1/2 HP, 3/60/230/460 Volt, 1140 rpm motor. Mounted on painted carbon steel base with casters. Serial# 589-74F.

MFR: Sweco

https://images.aaronequipment.com/ItemImages/Mixers/Paddle-Mixer/American-Process-Systems-PPB030-807495_53452001_aa.jpg
View

Stock No.:

53452001

Eirich Model PPB030 Stainless Steel Paddle Blender

Used- Eirich / American Process Paddle Blender, Model PPB030, 30 Cubic Feet Capacity, Stainless Steel. Non-jacketed trough approximately 90" long x 30" wide x 39" deep. Single shaft approximate 4" diameter with (17) paddles, approximate 11.5" x 5" x 5/8" thick. Driven by a 7.5hp (5.5kW), 3/60/230/460 volt, 1755 rpm gear motor, final rpm 61. (2) Piece top hinged cover with 44" x 30" infeed section. End bottom outlet 8" x 8" with slide gate valve. Mounted on (4) legs. Serial# 807495, Built 2016. Last used in shredded cheese application. 3/60/460 Volt.

MFR: American Process Systems

https://images.aaronequipment.com/ItemImages/Centrifuges/Basket-Top-Unload/Tolhurst_54115001_aa.jpg
View

Stock No.:

54115001

Used Tolhurst 30” Basket Centrifuge | Top Unload | 0–1000 RPM | Stainless Steel

Used- Tolhurst Basket Centrifuge, Size 30", 0-1000 basket rpm, 70lbs/cu. ft maximum throughput. Stainless steel contact parts. Top Unload, Perforated basket. stainless steel bolt on top with clamp down cover, 6" sight glass. Cover has (2) 2-1/2" threaded inlets. Vessel approximately 30" diameter x 18" straight side. 4" side bottom outlet down to 1-1/4" threaded. 3 point mount on carbon steel frame with casters. Serial# TA-38533. Includes Hydraulic Drive skid, driven by a 7.5hp 3/60/230/460v 1175rpm motor through reducer, and a mounted Control Panel.

MFR: Tolhurst

https://images.aaronequipment.com/ItemImages/Plastics-Equipment/Extruders-Twin-Screw-CoRotate/Werner-and-Pfleiderer-ZSK-30-W9-2_54399008_aa.png
View

Stock No.:

54399008

Used Coperion Werner & Pfleiderer ZSK 30-W9/2 Twin Screw Extruder – High-Speed Lab & Production Compounding System

Used Coperion Werner & Pfleiderer ZSK 30-W9/2 Twin Screw Extruder High-Speed Lab & Production Compounding System. (2) 30 mm diameter side by side screws, 33.3:1 L/D ratio, 8 total barrel sections, (7) heated barrels, electrically heated water cooled. Driven by a 10.4 kw(14hp) -440-volt AC drive motor via a gear box. Screw speed maximum 500 RPM. Frame mounted, Control panel. Weight 1.1 tonnes. Extruder: 2800 mm L x 850 mm W x 1300 mm H. Previously used in a compounding application. Our Freight Specialists can assist with any customs documents and forms to insure a smooth transition.

MFR: Werner & Pfleiderer

https://images.aaronequipment.com/ItemImages/Plastics-Equipment/Extruders-Twin-Screw-CoRotate/APV-PGX-30_54399009_aa.jpg
View

Stock No.:

54399009

Used APV PGX 30 Twin Screw Extruder with K-Tron T22 Feeder – Compact Pilot Compounding System

Used APV PGX 30 Twin Screw Extruder with K-Tron T22 Feeder Compact Pilot Compounding System. 30 KG (66 lbs) per hour. (2) 30 mm diameter side by side screws, 10:1 L/D ratio. Electrically heated water cooled barrel. Driven by a 4 kw (5.36hp) -440-volt AC drive motor via a gear box. Screw speed maximum 161 RPM. Frame mounted on 4 wheels. K-Tron T22 twin screw feeder. Control panel mounted on extruder. Weight approx. 400 kgs. Extruder: 1800 mm L x 800 mm W x 2200 mm H. Previously used in a compounding application. Our Freight Specialists can assist with any customs documents and forms to insure a smooth transition.

MFR: APV

https://images.aaronequipment.com/ItemImages/Mills/Colloid-Mill/Ross-Industries-HSM-430SC_11059397_aa.jpg
View

Stock No.:

11059397

Used ROSS HSM-430SC Inline High Shear Mixer with SLIM Powder Injection System – 30 HP Explosion Proof Mixing Platform

Used ROSS HSM-430SC Inline High Shear Mixer with SLIM Powder Injection System 30 HP Explosion Proof Mixing Platform. Solids (powder) / Liquid Injection Manifold (SLIM). Equipped with 3" Liquid inlet, 2.5" Powder Inlet and 3" Liquid outlet. Driven by 30 HP, 208-230/460 volt, 1760 rpm Explosion Proof (XP) Motors. Powder / Liquid Dispersing / Mixing System. The Liquid stream enters the mixer and immediately encounters the powder (solids) at the high shear zone (rotor and stator assembly). The resulting dispersion is expelled centrifugally through the stator opening at high velocity.

MFR: Ross Industries

https://images.aaronequipment.com/ItemImages/Plastics-Equipment/Size-Reduction-Grinders-and-Granulators/Tria-900-NS-R_10755147_aa.jpg
View

Stock No.:

10755147

Used Tria Model 900 NS-R Pull Roll Granulator – High-Performance Industrial Granulator

Used Tria Model 900 NS-R Pull Roll Granulator. 12.5" x 40" feed throat (1020mm x 320mm). Five (5) knife open rotor with two (2) bed knives. Rotor is belt driven by a 22 Kw (30 HP). Feed hopper with rear mounted 36" wide steel / serrated pull rolls. Air actuated feed rolls are powered by a 1 Kw (1.5 HP) A/C motor. 9" x 19.5" front material hopper entrance. 12.6 Kw (17 HP) blower discharge with Kongskilde OK160 piping and cyclone with filter bag. Approximate production rate of 400-600 kg/hr. (880-1320 lbs./hr.). Includes free standing panel with controls. 480/3/60

MFR: Tria

https://images.aaronequipment.com/ItemImages/Plastics-Equipment/Size-Reduction-Grinders-and-Granulators/Granutec-1216PG-30_10128120_aa.jpg
View

Stock No.:

10128120

Used Granutec 1216PG-30 Plastic Granulator | 30 HP Industrial Plastic Grinder

Used Granutec 1216PG-30 Plastic Granulator | 30 HP Industrial Plastic Grinder. The serial number is 302-3795. The throat is 11" by 11". It has 7 knives. The motor is 30 hp and requires 230/460 vac 3 ph and goes 1760 rpm. On casters.

MFR: Granutec

https://images.aaronequipment.com/ItemImages/Plastics-Equipment/Size-Reduction-Grinders-and-Granulators/Sprout-Bauer-DSF-1518_44496015_aa.jpg
Submit Offer $6,500 View

Stock No.:

44496015

Used Andritz Sprout-Bauer DSF1518 Granulator – 30HP, Film Granulation, 7 Knife Rotor

Used- Andritz Sprout-Bauer Granulator, Model DSF1518. 7 knife rotor, 2 bed knife. Driven by 30HP, 3/60/460 Volt only motor. Belt driven 5? x 18? blow-in in-feed hopper, vacuum take off discharge. Mounted on a short leg base. No starter or controls. Designed for film granulation. Serial# 2000-00373.

MFR: Sprout Bauer

Recently reduced items

https://images.aaronequipment.com/ItemImages/Mixers/Paddle-Mixer/Paul-O-Abbe_52919007_aa.jpeg
Submit Offer $5,190 View

Stock No.:

52919007

Used Paul O Abbe Stainless Steel Fluidizer – 0.7 Cu Ft for Sale

Used- Paul O Abbe Fluidizer, Stainless Steel. Approximate 0.7 cubic feet, 20 liter. Non jacketed trough, 16" wide x 18-1/2" long x 18-1/2" deep. (2) 1-1/2" diameter x 15" long shafts, each have (14) 3" long x 3" wide x 1/8" thick paddles on 1/2" diameter posts. Driven by (2) .33hp, 3/60/230/460 volt, 1700rpm motors, through a reducer 8:1. Bottom bombay doors. 9-1/2" Diameter bottom discharge, 20" discharge height. Includes mounted control panel. Mounted on (4) casters. Serial# A45254.

MFR: Paul O Abbe

https://images.aaronequipment.com/ItemImages/Dryers-Drying-Equipment/Rotary-Hot-Air/Summerlot_52919005_aa.jpg
View

Stock No.:

52919005

Used Summerlot Engineered Products Dryer – 316 Stainless Steel

Used- Summerlot Engineered Products Dryer, 316 Stainless Steel. Cantilevered S/C. 12" long x 6" wide feed hopper, with a 3-3/4" diameter x 48" long screw, 3/4" pitch. Driven by a 1hp, 3/60/208-230/460 volt, 1755 rpm motor. Approximately 10" diameter x 136" long dryer vessel, with (4) fixed baffles. Driven by a 2hp, 3/60/230/460 volt, 1140 rpm motor through reducer, 5.76:1. Approximate 8" diameter discharge with a Flowseal valve. 36" Discharge height. Serial# 88211.

MFR: Summerlot

https://images.aaronequipment.com/ItemImages/Dryers-Drying-Equipment/Oven/PB-1542_50028005_aa.jpg
View

Stock No.:

50028005

Unused JBT Foodtech FORMCOOK Progrill Contact Cooker – Model PB-1542 Electric ProBake

Unused- JBT Foodtech FORMCOOK Progrill Contact Cooker. Model PB-1542 Electric ProBake. With 10 Degree Incline and Top Belt. Overall Belt Width 60". Usable Belt Width 59", Cooking Length 13.78'. Seven Lower Electric Platens, Upper and Lower Teflon Style Belting. Electrical Specifications 460/3/60 (110/1/60), Electric Drive, Basic Belt Cleaning System, Digital Read-out System, 12" Out-feed Conveyor, Standard Exhaust Fan. Controllogix Processor disconnects on all motors. HMI Screen A. Platens 3/60/460 / 1/60/110 Electric Drive.

https://images.aaronequipment.com/ItemImages/Mills/Pebble-Mill/52038001_aa.jpg
Submit Offer $2,500 View

Stock No.:

52038001

Used - Paul O Abbe Ball Mill / Pebble Mill, Carbon Steel, 26 Gallon

Used- Paul O Abbe Ball Mill / Pebble Mill, Carbon Steel. Approximate 26 Gallon Total Volume. Jacket chamber approximate 18" diameter x 24-1/2" long. Driven by a 3hp, 3/220/440 volt motor. Rotary unions. Manhole cover. Mounted on a painted carbon steel frame.

Explore our guides.

Enhance your equipment knowledge with our resources.

August 20, 2026

Guide to Equipment Photography for Faster Sales

Learn equipment photography tips that can help sell used machinery faster, including 360° photos, clean backgrounds, spec tags, lighting, and image quality.

Blog Used Equipment

April 7, 2026

Everything You Should Know Before Buying Used Cannabis Equipment

The cannabis industry has been booming, and with this growth comes the need for efficient and cost-effective manufacturing solutions.

Cannabis Industry Blog

April 7, 2026

Everything You Should Know Before Buying A Used Stainless Steel Tank

What do you need to know before buying a stainless-steel tank?

Tanks Blog

Sell Equipment

Have surplus equipment? We offer flexible options including direct purchase, consignment, or listing on our marketplace — all backed by trusted professionals.

Learn about selling

Buy Used Equipment

Discover one of the world’s largest inventories of used processing and packaging equipment — ready to ship and backed by decades of industry expertise.

Browse all equipment

Auctions

Join global buyers and sellers at AIS-hosted auctions featuring top-quality surplus equipment from leading facilities around the world.

View current auctions