CALL 630-350-2200
View All Equipment Auctions OEM & New Equipment
Appraisals Equipment Reconditioning Asset Management Plant Liquidation Financing Centrifuge Parts & Services
Company Overview Meet Our Team Locations & Contact

Explore our extensive equipment marketplace

Discover a wide range of used processing and packaging machinery tailored to meet your industry needs. Use our advanced search features to find the perfect equipment quickly and efficiently.

Recently added products

Clear
https://images.aaronequipment.com/ItemImages/Mills/3-Roll-or-More/Keith-Machinery-4X8_83818_aa.jpg
Submit Offer $3,000 View

Stock No.:

83818

Industrial Three Roll Mill - Keith Machinery 4” x 8” Cored Rolls

Used- Keith Machinery Horizontal Three Roll Mill, Model 4X8. (3) 4" Diameter x 8" wide cored rolls. Adjustable end guides, knife scraper with discharge pan. Driven by an approximate 1 hp motor. Serial # 95021B.

MFR: Keith Machinery

https://images.aaronequipment.com/ItemImages/Plastics-Equipment/Pelletizing-Line-Single-Screw/PTI-TS4500_10755160_aa.jpg
View

Stock No.:

10755160

Used PTI TS4500 4.5" Pelletizing Line – 200 HP Extruder, Water Ring Pelletizer

Used- PTI Pelletizing Line, Model TS4500, 4.5" Diameter. 30:1 L/D Extruder having an electrically heated, water cooled (closed loop), and side vented barrel at a nominal 42? center-line height. The gearbox is a Flender model SZNE250 having a reduction ratio of 13.88:1 and has a service rating of 200 HP and a catalogue rating of 325 HP. The gearbox is belt driven in a wraparound manner by a 200 HP D/C motor with Safetronics SCR control. Over-sized on center oblong feed throat with water cooling. Free-standing temperature control panel has ten (10) zones of temperature controls. SCR is mounted inside the control panel. 480/3/60 400 amps. S/N 1832. Mounted on the extruder discharge is a model HSC-45 hydraulic slide plate screen changer having two (2) nominal 4.5" diameter breaker plates with oversized 5 HP hydraulic power pack. S/N H45-204. Downstream is a PTI model CPF1000S water ring pelletizing system with 3 HP cutter head, die, sluiceway, water system, Gala model 8.1BF spin dryer and control panel. S/N 2780. 460/3/60 30 amps.

MFR: PTI

https://images.aaronequipment.com/ItemImages/Plastics-Equipment/Pelletizing-Line-Single-Screw/Prodex_10755161_aa.jpg
View

Stock No.:

10755161

Used Prodex 4.5" Pelletizing Line with 300 HP Extruder & Cumberland Pelletizer

Used- Prodex Pelletizing Line Prodex 4.5" 32:1 L/D extruder having an electrically heated, water cooled (closed loop), and side vented barrel. The gearbox is a Lufkin change gear gearbox and driven in a tuck under manner by a 300 HP A/C motor with Yaskawa inverter. Includes stand-alone cooling system for the gearbox. Over-sized on center oblong feed throat with water cooling and volumetric screw feeder. Free-standing temperature control panel has ten (10) zones of temperature controls. Inverter is free standing and mounted in its own enclosure. Mounted on the extruder discharge is a hydraulic slide plate screen changer having two (2) nominal 4.5" diameter breakers with hydraulic power pack, stand, and strand die. Downstream includes an 11" Cumberland "Quietizer" pelletizer with solid helical rotor. Powered by a 25 HP A/C motor and Yaskawa model V1000 inverter. Pelletizer feeds 10" x 72" Witte two deck screener. Offered less extruder screw.

MFR: Prodex

https://images.aaronequipment.com/ItemImages/Dryers-Drying-Equipment/Rotary-Vacuum-Dryers/DVT-130_53844015_aa.jpg
View

Stock No.:

53844015

Used Littleford Model DVT-130 Mixer/Reactor – High-Performance Industrial Proces

Used Littleford Model DVT-130 Mixer/Reactor, Stainless Steel. 3.1 Cubic feet working capacity (4.6 total). Jacketed chamber approximately 20" diameter x 26" long, bolt-on flat hinged jacketed cover. Jacket rated 75 psi at 32 to 320 degrees F. Internal rated 100 psi / Full vacuum at 32 to 320 degrees F. Side chopper motor, driven by 15hp, 3/60/230/460 volt, 3495 rpm (not installed). Includes control panel with voltage/phase indicators, gauges, piping. National Board#4298. Serial# 41779-4298. 3/60/480 Volt.

https://images.aaronequipment.com/ItemImages/Mills/Colloid-Mill/Charlotte-SD-40_10128108_aa.jpg
View

Stock No.:

10128108

Used Charlotte SD-40 Stainless Steel Inline Colloid Mill | 40 HP High Shear Milling System

Used Charlotte SD-40 Stainless Steel Inline Colloid Mill | 40 HP High Shear Milling System. On a common stainless steel base with 40 hp, 230/460 vac, 3 phase, 60 cycle, 3,565 rpm motor. Designed for pumpable slurry products. Rated up to 1,200 gallons per hour, depending on the product being processed. Equipped with 3" OD / 2"ID treaded fittings and an adjustable gap rotor. Partial reduction down to 3-5 microns depending on materials, application and machine configuration. Last used in the food industry. Serial number 4211. This unit includes a motor starter.

MFR: Charlotte

https://images.aaronequipment.com/ItemImages/Plastics-Equipment/Extruders-Twin-Screw-CoRotate/Werner-and-Pfleiderer-ZSK40_10151368_aa.jpg
View

Stock No.:

10151368

Werner & Pfleiderer ZSK40 Twin Screw Extruder for Sale – 40mm, 50 HP

Used-Werner & Pfleiderer Model ZSK40, 40mm Co-rotating twin screw extruder. 1990 Model year. 46:1 L/D vented barrel with 11-barrel sections and a 41" centerline height. Driven by 50 hp 500 volt 1750/2100 rpm DC motor with SCR control and with a screw speed of 517 rpm. Includes Acrison 1.5 hp weight loss differential feeder, 2.2 kw Tervac vacuum pump, and side feeder.

MFR: Werner & Pfleiderer

https://images.aaronequipment.com/ItemImages/Plastics-Equipment/Size-Reduction-Grinders-and-Granulators/Cumberland-2428I_10755129_aa.jpg
View

Stock No.:

10755129

Used Cumberland 2428I Granulator – 24" x 28" Twin Shear Rotor, 40 HP

Used- Cumberland, Model 2428I Granulator. 24" x 28" feed throat. 3 knife twin shear open rotor. 2 bed knife. 40 hp 230/460 volt motor. Tray feed hopper. 8" right hand airveyor discharge.

MFR: Cumberland

https://images.aaronequipment.com/ItemImages/Blanchers-Cookers/Blanchers-Cookers/Unknown-N-A_42505001_a.jpg
Submit Offer $7,000 View

Stock No.:

42505001

Used 304 Stainless Steel Rotary Blancher – 40" x 98" Perforated Drum, Variable Speed

Used- Rotary Blancher, 304 Stainless Steel. Perforated drum approximately 40" diameter x 98" long, driven by a 2 hp, 3/60/208-230/460 volt, 1755 rpm Reeves variable speed motor, ratio 70.6 to 1, minimum / maximum rpm 6.6/60. 3/16" Diameter screen holes, side access doors. End feed and discharge. Mounted on a stainless steel frame.

MFR: Unknown

https://images.aaronequipment.com/ItemImages/Presses/Tablet-Rotary/Korsch-PH-106-DMS_44298050_b.jpg
View

Stock No.:

44298050

Used Korsch PH 106/DMS Rotary Tablet Press – 6 Station, 40 KN, 32,400 Tablets/Hour

Used- Korsch Rotary Tablet Press, Model PH 106/DMS, 6 station, 40 KN compression pressure, 15 mm max tablet diameter, 15 mm max depth of fill, rated up to 32,400 tablets/hour, machine #1.0037.95.

MFR: Korsch

https://images.aaronequipment.com/ItemImages/Mixers/Planetary-Mixer/Ross-Industries-HSM-40_47577006_ab.jpg
View

Stock No.:

47577006

Used Ross HSM-40 Vacuum Double Helical Mixer Reactor – Stainless, Jacketed, Explosion-Proof

used- Ross HSM-40 Vacuum Double Helical Mixer Reactor, 316 stainless steel. This unit will mix most things that a double planetary mixer will mix, and in many cases, better and faster. Unit has air/oil lift mechanism to raise and lower the drive to allow the removal of the mix tank. Designed for operations under vacuum & a positive pressure of 35 psi @ 350f, jacket maximum allowable working pressure 100 psi @ 350f. Minimum design metal temperature 0f at 100 psi.7.5hp motor. ross metal fabricators Serial# 11801-1, National Board# 463, CRN 15925. stainless steel contact parts. jacketed mix can with provision for thermocouple, insulated with sheathing. explosion proof motor runs on 575 volts, 3 phase, 60 hz. no controls. mixer dimensions for the ross hsm-40: 43" w x 68" l x 91" h lowered position tank id is about 23 and about 27.5 deep. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Ross Industries

https://images.aaronequipment.com/ItemImages/Mixers/Planetary-Mixer/Ross-Industries-HDM-40_47577015_aa.jpg
View

Stock No.:

47577015

Used Ross HDM-40 Gallon Double Planetary Mixer – Vacuum Rated, 316SS, 15 HP (Approx.)

Used- Ross HDM-40 Gallon Double Planetary Mixer. 5 to 40-gallon working capacity. Designed to mix under a full vacuum 29-1/2" HG. An air over oil hydraulic lift system is included to raise and lower the top of the mixer with drives and mixing blades. All product contact parts 316SS with a 150-grit finish and exterior stainless with an 80-grit finish. Driven by a 15 HP (to be confirmed) motor with a mechanical variable speed drive. All carbon steel surfaces are painted with a two component epoxy. Fitted with standard rectangular profile mixing blades.Comes with a control panel suitable for 3 PH / 60HZ /480v. Vacuum hood has a 2" sight port, a light fixture, a vacuum exhaust port and a port with 80 Watts / 120 volts EX-PROOF light. Mixer comes with one mix (not jacketed) can as follows: Made from 316 SS with interior finish 150-grit and exterior finish 80-grit, internally machined for use with a discharge press, designed for vacuum mixing, bottom outlet is a 4" Tri-Clover 316L SS flush plug connection with a 4" flush plug, mounted on casters, push pull handle. Prior use for manufacturing oral care products. Approximate weight of the mixer is 6234 Lbs. Manufactured in 2003.

MFR: Ross Industries

https://images.aaronequipment.com/ItemImages/Kettles/Stainless-Steel-0-499-Gallon/Gifford-40GALV-PA_50757001_aa.jpg
View

Stock No.:

50757001

Used Gifford-Wood Model V/P-A AGI-Mixer – 40 Gallon Vacuum Kettle, Homogenizer Mixer, Stainless Steel

Used- Gifford-Wood AGI-Mixer, Model V/P-A, Consisting of: (1) J.C. Pardo & Sons Vacuum Kettle, 40 Gallon, 316 Stainless Steel. Approximate 26" diameter x approximate 26" deep. Lift out clamp on domed top cover, hemispherical bottom. Internal rated 15 psi or full vacuum at 250 degrees F. 304 Stainless steel jacket rated 40 psi at 287 degrees F. Tilt out agitator bridge with inner bar agitator and an anchor style scrapper agitator. (1) Gifford Wood homogenizer mixer, all set up for hydraulic drive. 2" Center bottom outlet. Mounted on (4) legs. Serial# 4402, National Board# 2158. Includes an operator panel, control panel, 0.75hp circulation pump and a Watlow electric heater. Mounted on a common carbon steel base.

MFR: Gifford

Recently reduced items

https://images.aaronequipment.com/ItemImages/Mixers/Paddle-Mixer/Paul-O-Abbe_52919007_aa.jpeg
Submit Offer $5,190 View

Stock No.:

52919007

Used Paul O Abbe Stainless Steel Fluidizer – 0.7 Cu Ft for Sale

Used- Paul O Abbe Fluidizer, Stainless Steel. Approximate 0.7 cubic feet, 20 liter. Non jacketed trough, 16" wide x 18-1/2" long x 18-1/2" deep. (2) 1-1/2" diameter x 15" long shafts, each have (14) 3" long x 3" wide x 1/8" thick paddles on 1/2" diameter posts. Driven by (2) .33hp, 3/60/230/460 volt, 1700rpm motors, through a reducer 8:1. Bottom bombay doors. 9-1/2" Diameter bottom discharge, 20" discharge height. Includes mounted control panel. Mounted on (4) casters. Serial# A45254.

MFR: Paul O Abbe

https://images.aaronequipment.com/ItemImages/Dryers-Drying-Equipment/Rotary-Hot-Air/Summerlot_52919005_aa.jpg
View

Stock No.:

52919005

Used Summerlot Engineered Products Dryer – 316 Stainless Steel

Used- Summerlot Engineered Products Dryer, 316 Stainless Steel. Cantilevered S/C. 12" long x 6" wide feed hopper, with a 3-3/4" diameter x 48" long screw, 3/4" pitch. Driven by a 1hp, 3/60/208-230/460 volt, 1755 rpm motor. Approximately 10" diameter x 136" long dryer vessel, with (4) fixed baffles. Driven by a 2hp, 3/60/230/460 volt, 1140 rpm motor through reducer, 5.76:1. Approximate 8" diameter discharge with a Flowseal valve. 36" Discharge height. Serial# 88211.

MFR: Summerlot

https://images.aaronequipment.com/ItemImages/Dryers-Drying-Equipment/Oven/PB-1542_50028005_aa.jpg
View

Stock No.:

50028005

Unused JBT Foodtech FORMCOOK Progrill Contact Cooker – Model PB-1542 Electric ProBake

Unused- JBT Foodtech FORMCOOK Progrill Contact Cooker. Model PB-1542 Electric ProBake. With 10 Degree Incline and Top Belt. Overall Belt Width 60". Usable Belt Width 59", Cooking Length 13.78'. Seven Lower Electric Platens, Upper and Lower Teflon Style Belting. Electrical Specifications 460/3/60 (110/1/60), Electric Drive, Basic Belt Cleaning System, Digital Read-out System, 12" Out-feed Conveyor, Standard Exhaust Fan. Controllogix Processor disconnects on all motors. HMI Screen A. Platens 3/60/460 / 1/60/110 Electric Drive.

https://images.aaronequipment.com/ItemImages/Mills/Pebble-Mill/52038001_aa.jpg
Submit Offer $2,500 View

Stock No.:

52038001

Used - Paul O Abbe Ball Mill / Pebble Mill, Carbon Steel, 26 Gallon

Used- Paul O Abbe Ball Mill / Pebble Mill, Carbon Steel. Approximate 26 Gallon Total Volume. Jacket chamber approximate 18" diameter x 24-1/2" long. Driven by a 3hp, 3/220/440 volt motor. Rotary unions. Manhole cover. Mounted on a painted carbon steel frame.

Explore our guides.

Enhance your equipment knowledge with our resources.

August 20, 2026

Guide to Equipment Photography for Faster Sales

Learn equipment photography tips that can help sell used machinery faster, including 360° photos, clean backgrounds, spec tags, lighting, and image quality.

Blog Used Equipment

April 7, 2026

Everything You Should Know Before Buying Used Cannabis Equipment

The cannabis industry has been booming, and with this growth comes the need for efficient and cost-effective manufacturing solutions.

Cannabis Industry Blog

April 7, 2026

Everything You Should Know Before Buying A Used Stainless Steel Tank

What do you need to know before buying a stainless-steel tank?

Tanks Blog

Sell Equipment

Have surplus equipment? We offer flexible options including direct purchase, consignment, or listing on our marketplace — all backed by trusted professionals.

Learn about selling

Buy Used Equipment

Discover one of the world’s largest inventories of used processing and packaging equipment — ready to ship and backed by decades of industry expertise.

Browse all equipment

Auctions

Join global buyers and sellers at AIS-hosted auctions featuring top-quality surplus equipment from leading facilities around the world.

View current auctions