CALL 630-350-2200
View All Equipment Auctions OEM & New Equipment
Appraisals Equipment Reconditioning Asset Management Plant Liquidation Financing Centrifuge Parts & Services
Company Overview Meet Our Team Locations & Contact

Explore our extensive equipment marketplace

Discover a wide range of used processing and packaging machinery tailored to meet your industry needs. Use our advanced search features to find the perfect equipment quickly and efficiently.

Recently added products

Clear
https://images.aaronequipment.com/ItemImages/Plastics-Equipment/Slitting-Machinery/Dusenberry-Engr-815LR_48039002_ao.jpg
View

Stock No.:

48039002

Used Dusenbery 60” Slitter – Model 815 LR, Duplex Design, 3” Rewind Shafts

Used- Dusenbery 60" Slitter, Model 815 LR. Duplex design with 3" rewind shafts. 2 Motor design with (1) 15 hp GE DC motor and (1) 7.5 hp GE DC motor. Razor in groove slitting with six razor knife holders and six female grooved sections. Duplex rewind with 3" core shafts and set of lay on roll arms for each shaft with one lay on roll each. 65" Wide x 40" to 60" diameter unwind stand with 3" shaft. Fife guide design with disc brake clutch. Includes drive cabinet with drives and control panel. Serial # 54750.

MFR: Dusenberry Engr

https://images.aaronequipment.com/ItemImages/Kettles/Stainless-Steel-0-499-Gallon/Groen-DTA-3-60-SP_52905001_aa.jpg
View

Stock No.:

52905001

Groen Model DTA-3-60 SP Twin 60 Gallon Kettles

Used-Groen Model DTA-3-60 SP Twin 60 Gallon Kettles with Twin Pivoting Agitator. National Board stamped jackets rated 45 PSI @ 300 Deg F. Stainless steel common frame, rinse faucet. Elec: 3/60/230/460V.

MFR: Groen

https://images.aaronequipment.com/ItemImages/Coating-Pans/Coating-Pans/O'Hara-FC60XC_53213002_aa.jpeg
View

Stock No.:

53213002

Used O'Hara FC60XC 60" FastCoat Automatic Tablet Coating System | 360 kg Capacity | AHU, Pumps & Blower Included | 2011

Used O'Hara FC60XC 60" FastCoat Automatic Tablet Coating System | 360 kg Capacity | AHU, Pumps & Blower Included | 2011, SN 4064, New 2011. This unit features main pan, spray arm with guns, spray pump, electric and pneumatic panels in utility area, steam heated AHU on mezzanine, 50 hp blower, capacity is 360kg @ 0.8kg/L. 3/60/460V. With air handler, tray drying scrubber, pump, blower.

MFR: O'Hara

https://images.aaronequipment.com/ItemImages/Coating-Pans/Coating-Pans/O'Hara-FC60XC_53213003_aa.jpeg
View

Stock No.:

53213003

Used O’Hara 60" FC60XC High-Capacity Automatic Tablet Coater | 360 kg Batch System with AHU & Blower

Used O'Hara 60" FC60XC High-Capacity Automatic Tablet Coater | 360 kg Batch System with AHU & Blower, SN 4063, New 2011. This unit features main pan, spray arm with guns, spray pump, electric and pneumatic panels in utility area, steam heated AHU on mezzanine, 50 hp blower, capacity is 360kg @ 0.8kg/L. 3/60/460V. With air handler, tray drying scrubber, pump, blower.

MFR: O'Hara

https://images.aaronequipment.com/ItemImages/Plastics-Equipment/Extruders-Twin-Screw-CoRotate/Leistritz-Corporation-ZSE-60-MAXX-36D_53459029_aa.jpg
View

Stock No.:

53459029

Used Leistritz ZSE 60 MAXX-36D Twin Screw Extrusion Line with Pelletizing System – 495 kW Drive – Auction Asset

Used Leistritz ZSE 60 MAXX-36D Twin Screw Extrusion Line with Pelletizing System 495 kW Drive Auction Asset. Line consists of (1) Koch Technik Feeding System & Scholz Dosiertechnik Dosing unit, (1) Leistritz Twin Screw Extruder, Type ZSE 60 MAXX-36D. (2) 60 mm) diameter screws. 36:1 L/D Ratio. Co-rotating. 8-barrel housing section electrically heated, water cooled. (2) Degassing port. Maximum screw speed 1200 RPM. Flender Gearbox is direct driven via a 742 HP/495 kW 400volt/50cycle/3Ph motor. Free standing control panel with microprocessor and interconnecting wiring. Built in 2014 Serial# 04489, (1) BD Plast Double Screen Changer, type BDL, (1) Ettinger ERF 200 melt pump, Waterbath incl 2 siflers, Stainless steel, on legs, (1) ECON Pelletizer, type EUP 600, New 2014, (1) Tredkamp Mixing Silo, type 1C-T, Stainless steel, Volumen 10 m3. New 2007, (1) Moton Mixing Silo 14 m3 volume. on legs, control panel incl. elevator, (1) Big Bag System. Part of an auction sale. Available in end of July 2026. Part of an auction event. An additional 18% Buyers Premium will added to the purchasing price.

MFR: Leistritz Corporation

https://images.aaronequipment.com/ItemImages/Plastics-Equipment/Extruders-Twin-Screw-CoRotate/ZSC-60_53459031_aa.jpg
View

Stock No.:

53459031

Used Noris ZSC 60 Twin Screw Extrusion Line – 650-800 kg/hr Polymer Compounding System

Used- Noris ZSC 60 Twin Screw Extrusion line with a capacity of 650 800 kgs/hr. consisting of: Noris ZSC 60 Twin Screw Extruder, (2) 60 mm diameter screws, 40:1 L/D ratio, co-rotating inter-meshing side by side screw design, (9) heated barrels, electrically heated water cooled. Driven by a 400volt drive motor via a PIV gear box, screw speed maximum 746 RPM, (1) Ettinger Melt Pump, type ERF 200, (1) Stainless Steel Water Bath, (1) Pelletizer, (1) Control panel. Incl. additional infrastructure. Part of an auction sale. Available in end of July 2026. Part of an auction event. An additional 18% Buyers Premium will add to the purchasing price.

https://images.aaronequipment.com/ItemImages/Plastics-Equipment/Extruders-Twin-Screw-CoRotate/Leistritz-Corporation-ZSE-60-MAXX-44D_53459032_aa.jpg
View

Stock No.:

53459032

Used Leistritz ZSE 60 MAXX-44D Twin Screw Extruder – 60 mm Co-Rotating Extruder – Built 2018

Used- Leistritz Twin Screw Extruder, Type ZSE 60 MAXX-44D. (2) 60 mm) diameter screws. 44:1 L/D Ratio. Co-rotating. 10-barrel housing section electrically heated, water cooled. (2) Degassing port. Maximum screw speed 1200 RPM via a Flender Gearbox is direct driven via a 400volt/50cycle/3Ph motor. Incl. control panel. Built in 2018. Serial# 04977. Part of an auction sale. Available in end of July 2026. Part of an auction event. An additional 18% Buyers Premium will add to the purchasing price.

MFR: Leistritz Corporation

https://images.aaronequipment.com/ItemImages/Screeners-Sifters/Circular-Screeners/Sweco-US60S88_53529001_aa.jpg
View

Stock No.:

53529001

Used Sweco 60” Vibro-Energy Separator – Stainless Steel, Model US60S88

Used- Sweco 60" diameter Vibro-Energy Separator, Model US60S88, Stainless Steel. Single deck, single separation. Missing top frame. Driven by 2.5hp 3/60/230/460 volt, 1160rpm motor. Mounted on stainless steel frame with casters. Serial# US60-387-03.

MFR: Sweco

https://images.aaronequipment.com/ItemImages/Compressors/Recipricating-Gas-High-Pressure/C022-60-1975LX-CO2_53566001_aa.jpg
View

Stock No.:

53566001

Used Hydro-Pac LX Carbon Dioxide Compressor, Model C02.2-60-1975LX-CO2. Single stage; 400 to 2176 psi suction pressure; 2176 psi max. discharge pressure; Capacity @ 600 psig, 55 degree F inlet: 127 scfm; Capacity @ 870 psig, 55 degree F inlet: 989 scfm; 15 gpm (minimum) cooling water requirements at 60-80 degrees F. 60 HP, 3/60/230/460V motor, 120V control. Built 2020.

Used- Hydro-Pac LX Carbon Dioxide Compressor, Model C02.2-60-1975LX-CO2. Single stage; 400 to 2176 psi suction pressure; 2176 psi max. discharge pressure; Capacity @ 600 psig, 55 degree F inlet: 127 scfm; Capacity @ 870 psig, 55 degree F inlet: 989 scfm; 15 gpm (minimum) cooling water requirements at 60-80 degrees F. 60 HP, 3/60/230/460V motor, 120V control. Built 2020.

https://images.aaronequipment.com/ItemImages/Compressors/Air-Rotary/Atlas-Copco-GA45_53756001_aa.jpg
View

Stock No.:

53756001

Used Atlas Copco Model GA45 Industrial Rotary Screw Air Compressor | 60 HP

Used- Atlas Copco Rotary Screw Air Compressor, Model GA45. Liquid cooled; rated 294 cfm at 107 psi; 107 psig max. discharge pressure; Elektronikon control panel. Driven by a 60 hp, 3/60/230/460 volt, 3550 rpm motor. 17537 load hours.

MFR: Atlas Copco

https://images.aaronequipment.com/ItemImages/Generators/Diesel-Fuel-and-Natural-Gas-Fuel/Cat-G3304NA_54040002_aa.jpg
View

Stock No.:

54040002

Used 60kW Caterpillar Natural Gas Generator – Model G3304NA, Enclosed, 3-Phase, Skid Mounted

Used 60kW Caterpillar Natural Gas Generator Model G3304NA, Enclosed, 3-Phase, Skid Mounted; 3 phase, 60Hz, 480V, 1800rpm; load tested & ready to ship.

MFR: Cat

https://images.aaronequipment.com/ItemImages/Plastics-Equipment/Extruders-Twin-Screw-CoRotate/Leistritz-Corporation-ZSE-60-GL_54045001_aa.jpg
View

Stock No.:

54045001

Used Leistritz ZSE-60 GL Twin Screw Extruder – 36:1 L/D, 150 HP, Side Stuffer, Strand Dies, Screws & Spares

Used Leistritz ZSE-60 GL Twin Screw Extruder 36:1 L/D, 150 HP, Side Stuffer, Strand Dies, Screws & Spares. With (9) modular barrel sections. 114 kW / 150 HP Baumueller DC motor, 500 rpm max. screw speed, Barrels are electrically heated and internally cored for liquid cooling. Includes stand-alone Electrical enclosure/control panel (controls appear non-operational), LSB-47 twin screw side stuffer, Stand-alone pump tank/heat exchanger for barrels cooling, Two (2) Complete screw sets, segmented design with splined shafts, fully assembled, Approximately 25 pairs of spare screw elements, consisting of both flighted/conveying and mixing elements, Two (2) complete swing gate-type strand die assemblies, Three (3) or four (4) spare die plates. Numerous (approx.. 8-10) spare barrel closures & inserts Yr. 2000. Includes Allen Bradley DC Motor Drive. 480 50/60hz.

MFR: Leistritz Corporation

Recently reduced items

https://images.aaronequipment.com/ItemImages/Mixers/Paddle-Mixer/Paul-O-Abbe_52919007_aa.jpeg
Submit Offer $5,190 View

Stock No.:

52919007

Used Paul O Abbe Stainless Steel Fluidizer – 0.7 Cu Ft for Sale

Used- Paul O Abbe Fluidizer, Stainless Steel. Approximate 0.7 cubic feet, 20 liter. Non jacketed trough, 16" wide x 18-1/2" long x 18-1/2" deep. (2) 1-1/2" diameter x 15" long shafts, each have (14) 3" long x 3" wide x 1/8" thick paddles on 1/2" diameter posts. Driven by (2) .33hp, 3/60/230/460 volt, 1700rpm motors, through a reducer 8:1. Bottom bombay doors. 9-1/2" Diameter bottom discharge, 20" discharge height. Includes mounted control panel. Mounted on (4) casters. Serial# A45254.

MFR: Paul O Abbe

https://images.aaronequipment.com/ItemImages/Mills/Hammer-Mill/Quadro-196_50647001_aa.jpg
View

Stock No.:

50647001

Used - Quadro Comil Model 196, 304/316 Stainless Steel, 8,000 Lbs/Hr Capacity, 10 HP

Used- Quadro Comil, Model 196, 304 Stainless Steel. Approximate capacity up to 8,000 pounds an hour. 8" diameter top feed, 12" diameter bottom discharge. 12' dia x 12' dia housing. Requires (missing) impeller and impeller hardware. Housing 304 stainless steel, shaft and discharge chute 316 stainless steel. Driven by a 10 hp, 3/60/208-230/460 Volt, 1750 rpm motor. Serial# 0387.

MFR: Quadro

https://images.aaronequipment.com/ItemImages/Dryers-Drying-Equipment/Rotary-Hot-Air/Summerlot_52919005_aa.jpeg
View

Stock No.:

52919005

Used Summerlot Engineered Products Dryer – 316 Stainless Steel

Used- Summerlot Engineered Products Dryer, 316 Stainless Steel. Cantilevered S/C. 12" long x 6" wide feed hopper, with a 3-3/4" diameter x 48" long screw, 3/4" pitch. Driven by a 1hp, 3/60/208-230/460 volt, 1755 rpm motor. Approximately 10" diameter x 136" long dryer vessel, with (4) fixed baffles. Driven by a 2hp, 3/60/230/460 volt, 1140 rpm motor through reducer, 5.76:1. Approximate 8" diameter discharge with a Flowseal valve. 36" Discharge height. Serial# 88211.

MFR: Summerlot

https://images.aaronequipment.com/ItemImages/Tanks/Stainless-1000-4999-Gal/54567010_aa.jpeg
View

Stock No.:

54567010

Used Paul Mueller 1,500 Gallon 304 Stainless Steel Tank

Used Paul Mueller Company stainless steel pressure vessel, Type 304 stainless steel construction, 76" diameter x Height 170" to top mixer. 145" to top hatch, Top hatch 24" diameter x Legs 56" x 56". Serial# 106184-1, built 1992. Vessel manufactured to DIN Part RT4 pressure vessel standards. Unit designed for heat transfer service with heating surface (exact area not legible). Tank is rated Atmospheric.

Explore our guides.

Enhance your equipment knowledge with our resources.

August 20, 2026

Guide to Equipment Photography for Faster Sales

Learn equipment photography tips that can help sell used machinery faster, including 360° photos, clean backgrounds, spec tags, lighting, and image quality.

Blog Used Equipment

April 7, 2026

Everything You Should Know Before Buying Used Cannabis Equipment

The cannabis industry has been booming, and with this growth comes the need for efficient and cost-effective manufacturing solutions.

Cannabis Industry Blog

April 7, 2026

Everything You Should Know Before Buying A Used Stainless Steel Tank

What do you need to know before buying a stainless-steel tank?

Tanks Blog

Sell Equipment

Have surplus equipment? We offer flexible options including direct purchase, consignment, or listing on our marketplace — all backed by trusted professionals.

Learn about selling

Buy Used Equipment

Discover one of the world’s largest inventories of used processing and packaging equipment — ready to ship and backed by decades of industry expertise.

Browse all equipment

Auctions

Join global buyers and sellers at AIS-hosted auctions featuring top-quality surplus equipment from leading facilities around the world.

View current auctions