CALL 630-350-2200
View All Equipment Auctions OEM & New Equipment
Appraisals Equipment Reconditioning Asset Management Plant Liquidation Financing Centrifuge Parts & Services
Company Overview Meet Our Team Locations & Contact

Explore our extensive equipment marketplace

Discover a wide range of used processing and packaging machinery tailored to meet your industry needs. Use our advanced search features to find the perfect equipment quickly and efficiently.

Recently added products

Clear
https://images.aaronequipment.com/ItemImages/Dryers-Drying-Equipment/Spray-Dryer/MDL-050CM_54393001_aa.jpeg
View

Stock No.:

54393001

Unused GF Corporation MDL-050CM Micro Mist Spray Dryer – 3 kg/h Stainless Steel Lab Spray Drying System (2021)

Unused GF Corporation Micro Mist Spray Dryer, Model MDL-050CM. Stainless steel construction. 3kg/h (6.6 lbs/hour) evaporation capacity (inlet 200 degrees C/392 degrees F, outlet 60 degrees C/140 degrees F). Approx. 39" diameter X 40" straight side drying chamber. Four-fluid nozzle. Co-current air flow pattern. Cyclone and filter bag collection. 50ml/min liquid feed pump. Touch screen controls. 5kW heater. 3ph/200V. Built 2021.

https://images.aaronequipment.com/ItemImages/Heat-Exchangers/Shell-and-Tube-Stainless/Kennedy_13140018_a.jpg
View

Stock No.:

13140018

Used Approximately 3900 Square Foot Kennedy Tank & Manufacturing Co Heat Exchanger

Used- Kennedy Tank & Manufacturing Co Horizontal Heat Exchanger. 304 Stainless shell and tube side. Overall dimensions: 44" diameter x 20'6" long. Shell rated 50 at 250 degree F and tubes rated 38/FV at 250 degree F. Built 1997. Mounted on short saddles. Fittings: top (1) 4", (2) 6"; shell vent/drain (2) 2"; bottom (1) 24" and (1) 6". Tubes are 15' face to face length with (990) 1" tubes. Included bolt-on dished heads. Approximately 3900 Square Foot

MFR: Kennedy

https://images.aaronequipment.com/ItemImages/Heat-Exchangers/Plate-Type/Tranter-UFX-85-6-SP-401_11453484_aa.jpeg
View

Stock No.:

11453484

Used Tranter UFX-85-6-SP-401 Plate Heat Exchanger – High-Efficiency Thermal Transfer

Used 3,908 sq ft Tranter Superchanger Plate Heat Exchanger, model UFX-85-6-SP-401, stainless steel plates, rated 230 psi at 250 f, 12" inlet/outlet, built 2000

MFR: Tranter

https://images.aaronequipment.com/ItemImages/Heat-Exchangers/Plate-Type/Tranter-UFX-85-6-SP-401_11453485_aa.jpeg
View

Stock No.:

11453485

Used Tranter 3,908 Sq. Ft. Superchanger Plate Heat Exchanger – Model UFX-85-6-SP-401

Used- Tranter 3,908 sq ft Superchanger Plate Heat Exchanger, Model UFX-85-6-SP-401. Stainless steel plates. Rated 230 psi at 250 degrees F. 12" Inlet/outlet. Built 2000.

MFR: Tranter

https://images.aaronequipment.com/ItemImages/Mixers/Double-Arm-Mixer/AMK-VIU_10131011_aa.jpg
View

Stock No.:

10131011

Used AMK Double Arm Mixer VIU Strength Class IV – 1500L Capacity, 316SS, 135HP, Tilt Discharge, Built 2005

Used- AMK Double Arm Mixer, Type VIU-Strength Class IV. 316 (V4A) Stainless Steel on product contact parts. Max working capacity 396.8 gallon (1500 liter). Z-blades. Double jacketed bowl and not rated vacuum. Working temp 68-392 deg F (20-200 deg C). Hydraulic tilt discharge mechanism. top cover. Mounted on carbon steel support frame. New year 2005. Previous used in a pigment application. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: AMK

https://images.aaronequipment.com/ItemImages/Reactors/Stainless-Steel-0-499-Gallon/TetraPak_11690031_aa.jpeg
View

Stock No.:

11690031

Used Tetra Pak (Scanima) STM-1250V Aseptic Mixing Reactor | 1,500L High Shear Vacuum Vessel

Used- Tetrapak (Scanima) 1,500 Liters (396 Gallon) 316 Stainless Steel Vacuum and Pressure Jacketed Aseptic High Shear Mixing Reactor, Model STM-1250V. The vessel is rated full vacuum /45 PSI internal pressure, and is jacketed for 75 PSI maximum pressure, maximum jacket temperature is 150 Degrees C. Bottom entering high shear agitator driven by a 50 HP (3/60/460V) motor. Includes a 2" Pneumatic discharge valve and 2" recirculation valve. Includes a control panel with VFD, a pneumatic panel and an operator PC station. Built 2009.

MFR: TetraPak

https://images.aaronequipment.com/ItemImages/Mixers/Double-Arm-Mixer/Kurimoto-Osaka_10131007_aa.jpg
View

Stock No.:

10131007

Used Kurimoto Double Arm Sigma Blade Mixer | 1500L (396.8 Gal) | 304 SS | Jacketed | EPS Application

Used Kurimoto Double Arm Sigma Blade Mixer | 1500L (396.8 Gal) | 304 SS | Jacketed | EPS Application. 304 (V2A-1.4301) Stainless Steel on product contact parts. Working capacity 396.8 gallon (1500 liter). 304 stainless steel jacket bowl with counterweights. Sigma style blades. Last used in an EPS (super absorption) application. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Kurimoto Osaka

https://images.aaronequipment.com/ItemImages/Mixers/Double-Arm-Mixer/Kurimoto-Osaka_10131008_aa.jpg
View

Stock No.:

10131008

Heavy-Duty 1500L Kurimoto Sigma Blade Mixer – 304 SS, Jacketed, Double Arm Kneader

Heavy-Duty 1500L Kurimoto Sigma Blade Mixer 304 SS, Jacketed, Double Arm Kneader. 304 (V2A-1.4301) Stainless Steel on product contact parts. Working capacity 396.8 gallon (1500 liter). 304 stainless steel jacket bowl with counterweights. Sigma style blades. Last used in an EPS (super absorption) application. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Kurimoto Osaka

https://images.aaronequipment.com/ItemImages/Packaging-Equipment/Case-Sealers-Tapers/3M-800af_73438005_aa.jpg
Submit Offer $7,500 View

Stock No.:

73438005

3M-Matic 800af Adjustable Box Sealer | 28 Cases per Minute Performance

Used- 3M-Matic Model 800af Adjustable Top Only Case Sealer, Type 39600. Capable of speeds up to 28 cases per minute, depending on application. Case size range 150mm to 760mm (6" - 30") length x 120 to 545mm (4.75" - 21.5") x 120 to 620mm (4.75" - 24.5") height. Weight 5 lbs to 85 lbs. Serial# 3447. 1/60/115 volt, 3.8 amp.

MFR: 3M

https://images.aaronequipment.com/ItemImages/Packaging-Equipment/Case-Sealers-Tapers/3M-8000A_73569011_aa.jpg
Submit Offer $8,000 View

Stock No.:

73569011

Used 3M-Matic 8000A Adjustable Case Sealer – AccuGlide Taping Head, 40 CPM (2019)

Used 3M-Matic Model 8000A Adjustable Case Sealer with AccuGlide Taping Head. Rated for up to 40 cases per minute. 4.25" to 27.75" (108mm - 704.9mm) max box height, 4.5" to 21.5" (114.3mm - 546.1mm) max box width. 6" to Unlimited box length. 2" Tape head. Side Belt drive system. Uniform Box Types. 1ph/60Hz/120V requirements. Type: 11500 Serial# 21946 M, built 2019. Overall dimensions 70" x 43" x 65"T.

MFR: 3M

https://images.aaronequipment.com/ItemImages/Mills/3-Roll-or-More/Keith-Machinery-4X8_83818_aa.jpg
Submit Offer $3,000 View

Stock No.:

83818

Industrial Three Roll Mill - Keith Machinery 4” x 8” Cored Rolls

Used- Keith Machinery Horizontal Three Roll Mill, Model 4X8. (3) 4" Diameter x 8" wide cored rolls. Adjustable end guides, knife scraper with discharge pan. Driven by an approximate 1 hp motor. Serial # 95021B.

MFR: Keith Machinery

https://images.aaronequipment.com/ItemImages/Filters/Nutsche-Filter/Rosenmund-RPD4-388-8_10151515_aa.jpg
View

Stock No.:

10151515

Rosenmund 4 Square Meter Nutsche Filter, Model RPD4-388-86

Used- Rosenmund 4 Square Meter Nutsche Filter, Model RPD4-388-86. Bottom discharge; 904L stainless steel shell, 316 stainless steel jacket; Shell rated 75 psi/FV at 397 degrees F; Half pipe jacket rated 100 psi/FV at 392 degrees F; Base rated 150 psi/FV at 370 degrees F; 10 hp main drive; hydraulic pack; Serial # F69653-1185-1; National Board # 17935; Built 1986 (Rebuilt since).

MFR: Rosenmund

Recently reduced items

https://images.aaronequipment.com/ItemImages/Mixers/Paddle-Mixer/Paul-O-Abbe_52919007_aa.jpeg
Submit Offer $5,190 View

Stock No.:

52919007

Used Paul O Abbe Stainless Steel Fluidizer – 0.7 Cu Ft for Sale

Used- Paul O Abbe Fluidizer, Stainless Steel. Approximate 0.7 cubic feet, 20 liter. Non jacketed trough, 16" wide x 18-1/2" long x 18-1/2" deep. (2) 1-1/2" diameter x 15" long shafts, each have (14) 3" long x 3" wide x 1/8" thick paddles on 1/2" diameter posts. Driven by (2) .33hp, 3/60/230/460 volt, 1700rpm motors, through a reducer 8:1. Bottom bombay doors. 9-1/2" Diameter bottom discharge, 20" discharge height. Includes mounted control panel. Mounted on (4) casters. Serial# A45254.

MFR: Paul O Abbe

https://images.aaronequipment.com/ItemImages/Dryers-Drying-Equipment/Rotary-Hot-Air/Summerlot_52919005_aa.jpg
View

Stock No.:

52919005

Used Summerlot Engineered Products Dryer – 316 Stainless Steel

Used- Summerlot Engineered Products Dryer, 316 Stainless Steel. Cantilevered S/C. 12" long x 6" wide feed hopper, with a 3-3/4" diameter x 48" long screw, 3/4" pitch. Driven by a 1hp, 3/60/208-230/460 volt, 1755 rpm motor. Approximately 10" diameter x 136" long dryer vessel, with (4) fixed baffles. Driven by a 2hp, 3/60/230/460 volt, 1140 rpm motor through reducer, 5.76:1. Approximate 8" diameter discharge with a Flowseal valve. 36" Discharge height. Serial# 88211.

MFR: Summerlot

https://images.aaronequipment.com/ItemImages/Dryers-Drying-Equipment/Oven/PB-1542_50028005_aa.jpg
View

Stock No.:

50028005

Unused JBT Foodtech FORMCOOK Progrill Contact Cooker – Model PB-1542 Electric ProBake

Unused- JBT Foodtech FORMCOOK Progrill Contact Cooker. Model PB-1542 Electric ProBake. With 10 Degree Incline and Top Belt. Overall Belt Width 60". Usable Belt Width 59", Cooking Length 13.78'. Seven Lower Electric Platens, Upper and Lower Teflon Style Belting. Electrical Specifications 460/3/60 (110/1/60), Electric Drive, Basic Belt Cleaning System, Digital Read-out System, 12" Out-feed Conveyor, Standard Exhaust Fan. Controllogix Processor disconnects on all motors. HMI Screen A. Platens 3/60/460 / 1/60/110 Electric Drive.

https://images.aaronequipment.com/ItemImages/Mills/Pebble-Mill/52038001_aa.jpg
Submit Offer $2,500 View

Stock No.:

52038001

Used - Paul O Abbe Ball Mill / Pebble Mill, Carbon Steel, 26 Gallon

Used- Paul O Abbe Ball Mill / Pebble Mill, Carbon Steel. Approximate 26 Gallon Total Volume. Jacket chamber approximate 18" diameter x 24-1/2" long. Driven by a 3hp, 3/220/440 volt motor. Rotary unions. Manhole cover. Mounted on a painted carbon steel frame.

Explore our guides.

Enhance your equipment knowledge with our resources.

August 20, 2026

Guide to Equipment Photography for Faster Sales

Learn equipment photography tips that can help sell used machinery faster, including 360° photos, clean backgrounds, spec tags, lighting, and image quality.

Blog Used Equipment

April 7, 2026

Everything You Should Know Before Buying Used Cannabis Equipment

The cannabis industry has been booming, and with this growth comes the need for efficient and cost-effective manufacturing solutions.

Cannabis Industry Blog

April 7, 2026

Everything You Should Know Before Buying A Used Stainless Steel Tank

What do you need to know before buying a stainless-steel tank?

Tanks Blog

Sell Equipment

Have surplus equipment? We offer flexible options including direct purchase, consignment, or listing on our marketplace — all backed by trusted professionals.

Learn about selling

Buy Used Equipment

Discover one of the world’s largest inventories of used processing and packaging equipment — ready to ship and backed by decades of industry expertise.

Browse all equipment

Auctions

Join global buyers and sellers at AIS-hosted auctions featuring top-quality surplus equipment from leading facilities around the world.

View current auctions