August 20, 2026
Guide to Equipment Photography for Faster Sales
Learn equipment photography tips that can help sell used machinery faster, including 360° photos, clean backgrounds, spec tags, lighting, and image quality.
Discover a wide range of used processing and packaging machinery tailored to meet your industry needs. Use our advanced search features to find the perfect equipment quickly and efficiently.
Cannabis Equipment
5 subcategories
Dryers - Drying Equipment
13 subcategories
Mills
10 subcategories
Packaging Equipment
40 subcategories
72 Categories
(1)
(63)
(46)
(60)
(23)
(29)
(27)
(26)
(42)
(21)
(9)
(33)
(24)
(51)
(23)
(15)
(63)
(3)
(25)
(59)
(37)
(11)
(20)
(23)
(1)
(5)
(6)
746 Manufacturers
Browse all equipmentStock No.:
44496016Used- Andritz Sprout-Bauer Model DSF1518 Granulator. 7-knife rotor, 2 bed knife. Driven by 30 HP 460 volt only motor, belt drive. 5" X 18" blow-in in-feed hopper, vacuum take-off discharge. Mounted on a short leg base. No starter/controls. Designed for film granulation. Previously used for recycling polyester film edge trim.
MFR: Sprout Bauer
Stock No.:
44496018Used- Andritz / Sprout-Bauer 30HP Model DSF1518 Granulator. 7-knife rotor, 2 bed knife. Driven by 30 HP 460 volt only motor, belt drive. 5" X 18" blow-in in-feed hopper, vacuum take-off discharge. Mounted on a short leg base. No starter/controls. Designed for film granulation. Previously used for recycling polyester film edge trim.
MFR: Sprout Bauer
Stock No.:
50467035Used- Gaspar Reactor, 30 Gallon. 316L Stainless steel construction, approximately 24" diameter x 24" straight side, Elliptical removable top, elliptical dish bottom. Internal rated 150 psi and full vacuum at 400 degrees F. Jacket rated for 150 psi at 400 degree F. Top mounted 5 hp Chemineer agitator drive with mechanical seal, 230/460 volt XP motor. Center bottom outlet. Mounted on (4) painted carbon steel legs. Serial# 495032, National Board# 821.
MFR: Gaspar Inc.
Stock No.:
50388107Used- IKA Works Dispax Reactor High Shear Inline Disperser, Model DR 2000/10, Stainless Steel. Nominal flow rate 35 gallons per minute (8,000 l/h), nominal tip speed 4500 feet per minute. Driven by a 30hp, 3/60/230/460 volt, 3525 rpm motor. 2" Inlet & outlet. Unit mounted on a base. Part# P015742. Serial # 2599-12.
MFR: IKA Works
Stock No.:
51068005Used Cumberland 14-85 Pelletizer 14" Pelletizer with 24-Knife Rotor & 30 HP TECO/Westinghouse AC motor, bolt on blades, ABB VS AC drive in panel mounted to base, new belts, new rotor and feed roll bearings, one knurled, one poly infeed roll, manual pull roll tension, machine is bolted onto a 33"H steel stand with fork rails and diamond plate steel stairs. blades sharpened, new hardware, 64" discharge height, approximately 101" feed height, wired for 460V. Footprint is 90"L x 56"W x 119"H.
MFR: Cumberland
Stock No.:
49307005Used- Great Western Manufacturing Tru-Balance Screener, Type TB, 30" Diameter, Model 611/4 (QA30), 304 Stainless Steel. Approximate 500 pounds per minute with wheat flour. Approximate 30" diameter, (4) sieves. Approximate net sieving area 15 square feet. Driven by a 1.5 HP, 3/60/230/460 volt, 1160 rpm motor. 5" top opening, bottom openings: 5", 4". Mounted on a painted carbon steel frame. Serial# 3882. Built 1999.
MFR: BF Gump
Stock No.:
51708014Used- Macon Screener, 30" Diameter, 304 Stainless Steel. Single deck, 2 separation. No screen. Top clamp-on cover with 8" center inlet. Driven by a approximate 1/2hp, 3/60/460 volt, 1140 rpm motor. Mounted on a painted carbon steel base.
MFR: Macon
Stock No.:
51454001Used- Bowen Engineering BLSA Laboratory Spray Dryer. 316 stainless steel. 30" (770 mm) diameter x 28" (720 mm) straight side x 30" (770 mm) coned bottom. Approximate evaporation rate 15-80 pounds (6.8-26.3 kgs) an hour. Atomizer. Air requirements 100 psi (6.66 bar), Inlet temperature range to 1000 degree F (537.77 degree C), side access door. Digital control panel mounted on unit. Mounted on stainless steel legs. Includes cyclone, collection jar, gas heater and blower, piping and additional infrastructure. Previous used in a Nutraceutical application. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible
MFR: Bowen
Stock No.:
52695001Used-Myers Engineering Single Shaft Disperser, Model 800A-30. 2-1/4" diameter x 46" long 304 stainless steel shaft with a 14" diameter 304 stainless steel saw tooth blade. 360 Degree rotation. Air over oil lift with an approximate 48" rise, overall raised height approx 122''. Manually adjustable speed range. Driven by a 30 hp, 3/60/480 volt, 1760 rpm XP motor. Base mounted. Includes approx 450 gal carbon steel mixing can. Can measures 48" dia x 56" straight side. Distance of mixer blade to ground is 8".
MFR: Myers
Stock No.:
53228003Used GEA Niro Mobile Minor Stainless Steel Laboratory Spray Dryer | Pilot-Scale | 17 kg/hr | Mobile Unit. Approximate evaporation rate of 1-7 kg/hr. (2.2-15.4 Lbs./hr.) depending on product. Niro centrifugal air operated atomizer. Approx. 800 mm (31-1/2") diameter x 915 mm (36") straight side. Chamber is lagged and clad. Electric heater, cyclone, pipework and additional infrastructure. Mounted on mobile frame on wheels. Reported in good condition. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
MFR: Niro
Stock No.:
53524011Used- Stainless Steel Seasoning Drum. Approximate 30" diameter x 27" long straight side x 44" total length. (8) Internal flights. Has adjustable pitch. 20" Inlet, 23" outlet. Driven by 1/2hp, 90 volt, 1750 rpm motor. Control panel with variable speed adjustment. Mounted on stainless steel frame with casters. 120 Volt.
Stock No.:
53524012Used Seasoning Drum, Stainless Steel, Approximate 30" diameter x 27" long straight side x 44" total length. (8) Internal flights. Has adjustable pitch. 20" Inlet, 23" outlet. Driven by 1/2hp, 90 volt, 1750 rpm motor. Control panel with variable speed adjustment. Mounted on stainless steel frame with casters. 120 Volt.
Stock No.:
52919007Used- Paul O Abbe Fluidizer, Stainless Steel. Approximate 0.7 cubic feet, 20 liter. Non jacketed trough, 16" wide x 18-1/2" long x 18-1/2" deep. (2) 1-1/2" diameter x 15" long shafts, each have (14) 3" long x 3" wide x 1/8" thick paddles on 1/2" diameter posts. Driven by (2) .33hp, 3/60/230/460 volt, 1700rpm motors, through a reducer 8:1. Bottom bombay doors. 9-1/2" Diameter bottom discharge, 20" discharge height. Includes mounted control panel. Mounted on (4) casters. Serial# A45254.
MFR: Paul O Abbe
Stock No.:
52919005Used- Summerlot Engineered Products Dryer, 316 Stainless Steel. Cantilevered S/C. 12" long x 6" wide feed hopper, with a 3-3/4" diameter x 48" long screw, 3/4" pitch. Driven by a 1hp, 3/60/208-230/460 volt, 1755 rpm motor. Approximately 10" diameter x 136" long dryer vessel, with (4) fixed baffles. Driven by a 2hp, 3/60/230/460 volt, 1140 rpm motor through reducer, 5.76:1. Approximate 8" diameter discharge with a Flowseal valve. 36" Discharge height. Serial# 88211.
MFR: Summerlot
Stock No.:
50028005Unused- JBT Foodtech FORMCOOK Progrill Contact Cooker. Model PB-1542 Electric ProBake. With 10 Degree Incline and Top Belt. Overall Belt Width 60". Usable Belt Width 59", Cooking Length 13.78'. Seven Lower Electric Platens, Upper and Lower Teflon Style Belting. Electrical Specifications 460/3/60 (110/1/60), Electric Drive, Basic Belt Cleaning System, Digital Read-out System, 12" Out-feed Conveyor, Standard Exhaust Fan. Controllogix Processor disconnects on all motors. HMI Screen A. Platens 3/60/460 / 1/60/110 Electric Drive.
Stock No.:
52038001Used- Paul O Abbe Ball Mill / Pebble Mill, Carbon Steel. Approximate 26 Gallon Total Volume. Jacket chamber approximate 18" diameter x 24-1/2" long. Driven by a 3hp, 3/220/440 volt motor. Rotary unions. Manhole cover. Mounted on a painted carbon steel frame.
Explore our guides.
Enhance your equipment knowledge with our resources.
August 20, 2026
Guide to Equipment Photography for Faster Sales
Learn equipment photography tips that can help sell used machinery faster, including 360° photos, clean backgrounds, spec tags, lighting, and image quality.
April 7, 2026
Everything You Should Know Before Buying Used Cannabis Equipment
The cannabis industry has been booming, and with this growth comes the need for efficient and cost-effective manufacturing solutions.
April 7, 2026
Everything You Should Know Before Buying A Used Stainless Steel Tank
What do you need to know before buying a stainless-steel tank?
Sell Equipment
Have surplus equipment? We offer flexible options including direct purchase, consignment, or listing on our marketplace — all backed by trusted professionals.
Buy Used Equipment
Discover one of the world’s largest inventories of used processing and packaging equipment — ready to ship and backed by decades of industry expertise.
Auctions
Join global buyers and sellers at AIS-hosted auctions featuring top-quality surplus equipment from leading facilities around the world.