CALL 630-350-2200
View All Equipment Auctions OEM & New Equipment
Appraisals Equipment Reconditioning Asset Management Plant Liquidation Financing Centrifuge Parts & Services
Company Overview Meet Our Team Locations & Contact

Explore our extensive equipment marketplace

Discover a wide range of used processing and packaging machinery tailored to meet your industry needs. Use our advanced search features to find the perfect equipment quickly and efficiently.

Recently added products

Clear
https://images.aaronequipment.com/ItemImages/Complete-Plants/Plant-Lines/53459009_aa.jpg
View

Stock No.:

53459009

Used Degasser Unit (ID 9600) with Heat Transfer Unit – 153,000 BPD Crude Oil Stabilization Plant

Used- Degasser Unit (ID 9600) with Heat Transfer Unit for 153Kbpd Crude Oil Stabilization Plant Incl. Degasser Trains A & B consisting of: 4x live oil/stabilized oil heat exchangers, Live oil/heat transfer fluid heater, Flow control valve, Degasser Vessel (NOT INCLUDED for train , A), Stabilized crude pump, Degasser water pump, 1st stage knock-out drum, Siemens fixed speed two stage centrifugal compressor, 1st stage condenser, 1st stage separator, 1st stage HC pump, 2nd stage knock-out drum, 2nd stage condenser, 2nd stage separator, Stabilizer feed pump, 2nd stage condenser. Incl. Heat Transfer Fluid (HTF) System: HTF Furnace, (2) forced draught fans, induced draught fan, Air preheater, Flue gas cooler, HTF storage tank, HTF make up pump, HTF expansion vessel, (2) HTF HT circulation pumps, (2) HTF LT circulation pumps, HTF drain collection vessel, HTF drain pump, Furnace LP fuel gas knock-out drum. Including piping, valves and additional infrastructure. Further details and technical documentation available upon request. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

https://images.aaronequipment.com/ItemImages/Generators/Steam-Turbine/DK080-250R_53459010_aa.png
View

Stock No.:

53459010

Used MAN Diesel & Turbo SE DK080/250R Diesel Steam Turbine – 40,554 kW

Used MAN Diesel & Turbo SE DK080/250R Diesel Steam Turbine 40,554 kW; speed 4648 rpm; Inlet pressure Normal/Max 97/101 bar, (Normal/Max 1455/1515 PSI). Inlet Temperature Normal/Max 525/535 ?; (Normal/Max 977/995 F). includes HTAC extractor, Sulter Dalian Condensate Pump, and additional infrastructure. New year 2018, installed in 2020, started up in production in October 2020. Was taken out of service in July 2022, 13993 hours in service. Overall dimensions 5900 mm x 5330 mm x 5170 mm high (192" x 173" x 168" high). Weight 100 tonnes (45454 lbs.). Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

https://images.aaronequipment.com/ItemImages/Generators/Steam-Turbine/DK080-250R_53459011_aa.png
View

Stock No.:

53459011

MAN Diesel & Turbo SE Model DK080/250R Diesel Steam Turbine

MAN Diesel & Turbo SE Model DK080/250R Diesel Steam Turbine 40554 KW; speed 4648 rpm; Inlet pressure Normal/Max 97/101 bar, (Normal/Max 1455/1515 PSI). Inlet Temperature Normal/Max 525/535 ?; (Normal/Max 977/995 F). includes HTAC extractor, Sulter Dalian Condensate Pump, and additional infrastructure. New year 2018, installed in 2020, started up in production in October 2020. Was taken out of service in July 2022, 13993 hours in service. Overall dimensions 5900 mm x 5330 mm x 5170 mm high (192" x 173" x 168" high). Weight 100 tonnes (45454 lbs.). Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

https://images.aaronequipment.com/ItemImages/Cannabis-Equipment/Extraction-and-Processing-Equipment/110_53402001_aa.jpg
View

Stock No.:

53402001

Complete Extrakt Labs Extraction & Filling Equipment Package

Used- Complete Extraction/Vape Pen Filling Line consisting of: Extrakt Labs 110+ Co2 Extractor; Extrakt Labs DrainDroyd vacuum filtration system; Extrakt Labs recommended Bio Mass Grinder 10L Rotovap; 710 Shark Vape Pen Filling Machine, v7.0. All tools and accessories included. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

https://images.aaronequipment.com/ItemImages/Complete-Plants/Complete-Plants-2/53419001_aa.jpg
View

Stock No.:

53419001

Wax Solvent Recrystallization Unit.

Used- Wax Solvent Recrystallization Unit. Design built by Plant Process Equipment, rated approximately 400 bbl./day. Skid mounted. All pressure vessels are National Board rated. Designed to 5% oil remaining in paraffin wax from a plastic to fuels facility. Major pieces of equipment include: - 8 scraped wall exchangers - 2 rotary drum filters - Ammonia refrigeration system - Fulton hot oil skid - 2 random packed stripper columns - Associated vessels, heat exchangers, pumps, instruments, etc. More information to come and upon request. Built 2020.

https://images.aaronequipment.com/ItemImages/Water-Treatment-Equipment/Water-Treatment-Equipment/53385003_aa.jpeg
Submit Offer $5,500 View

Stock No.:

53385003

Unused Stainless Steel S-1 Arc Filter Screen for Wet End Equipment – 1.3 m² Filtration

Unused- Stainless Steel S-1 Arc Filter Screen for Wet End Equipment. Filtration area 1.3 m2. Cleaning water volume 1.7 L/S. 316L SS Screen 704mm wide x 1820mm long x 0.05mm. 304 SS Pulp Feed Inlet Head, 316L SS Screen Plate, 304 SS Shell and Washing Device, Seam Width 50um. 6" Inlet, 6" fines outlet, 10" overs outlet. (2) Clamp-on cover (front and back). Control with Siemens Logo! 12/24 RC PLC. Mounted on (4) legs. Serial# 2022-01-1-0301. Built 2022. MFG - Shandong Tianli Machinery.

https://images.aaronequipment.com/ItemImages/Centrifuges/Tricanter/Alfa-Laval-UVNX-945B-11G_53361001_aa.jpg
View

Stock No.:

53361001

Alfa Laval UVNX-945B-11G Solid Bowl Tricanter Centrifuge. used.

Used- Alfa Laval UVNX-945B-11G Solid Bowl Tricanter Centrifuge. 316 Stainless steel construction (product contact areas). Maximum bowl speed 2900 rpm. Single row of lined cake discharge ports, single lead conveyor, base, casing, gearbox, feed pipe.45 kw, 400-690/3/50-60 main drive motor & gearbox. Back drive system. Mounted on a stand with 4 legs. Control panel. Previous used in an olive oil application .Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Alfa Laval

https://images.aaronequipment.com/ItemImages/Complete-Plants/Plant-Lines/53365001_aa.png
View

Stock No.:

53365001

Industrial Thermal Oxidizer with PLC Controls & Venturi Scrubber – Griffith, 2.5MM Btu/hr

Unused- Griffith Consulting Thermal Oxidizer/Quench/Venturi Scrubber System, Natural Gas, Horizontal. Burning Capacity 2.5MM Btu/hr maximum burner capacity, 1450 degree F operating temperature. Exhaust Stream: 1500 scfm air, 1.4kg/hr Combustible Compounds, 750 scfm at 500 to 600 degrees F from cold auger furnace, 750 scfm at 900-1000 degrees from hot auger furnace. VOC destruction efficiency 98%. Control panel with PLC/HMI, flame safeguard, high temp limit switch. Hot gas Quench. Venturi Scrubber. Sump Tank. 20HP blower. New and delivered: June 2023.

https://images.aaronequipment.com/ItemImages/Generators/Gas-Turbine/Clark-C-T-20341_53393004_aa.jpg
View

Stock No.:

53393004

Used – Clark Centrifugal Compressor Model C/T 20341, Size 2M – 5089 CFM, 9 Impellers, w/ GE 1750 HP Motor

Used- Clark Centrifugal Compressor, Model C/T 20341, Size 2M. 9 Impellers. Carbon Steel. 5089CFM inlet capacity, 9100 rpm maximum continuous speed. 315 degrees F maximum operating temperature, 225psi inlet pressure and 270psi discharge pressure. 8", 12" Top Openings. Western Gear Box 1-5.1111:1 Ratio. Repaired by Dresser-Rand in 2006. Serial# 2-9-2610. Includes GE Custom 8000 Induction Motor Rated 1750hp 3/60/4000v 1786rpm, with enclosure.

MFR: Clark

https://images.aaronequipment.com/ItemImages/Tanks/Carbon-Steel/134-474SE_53393008_aa.jpg
View

Stock No.:

53393008

Used – Steel Fab Horizontal Carbon Steel Pressure Tank – 40" x 96", 150 PSI, 2008

Used Steel Fab Horizontal Carbon Steel Pressure Tank 40" x 96", 150 PSI, 2008. Approximately 40" diameter x 96" straight side. Dished heads. Rated 150psi at -20 to 400 Degrees F. 16" diameter manway with cover, (2) 2" top connections. Head thickness .211, shell thickness .250. Part# 134-474SE. National Board# 520261, Serial# CRN.H9097.5C.

https://images.aaronequipment.com/ItemImages/Heat-Exchangers/Air-Cooled/XChanger-AA-1750_53393009_aa.jpg
View

Stock No.:

53393009

Used – Xchanger Inc. AA-1750 Air Cooled Heat Exchanger Skid – 24" Fan, 30 HP Motor

Used Xchanger Inc. AA-1750 Air Cooled Heat Exchanger Skid 24" Fan, 30 HP Motor. Aluminum Plate-Fins. Serial# 1207-B10733. 24" diameter fan, 4" Inlets/Outlets. Includes Universal Silencer, Model URBY 4, driven by a 30hp 3/60/230/460v 1750rpm motor. Birkett WB400 Safety Relief Valves. Mounted on Carbon Steel Frame.

MFR: XChanger

https://images.aaronequipment.com/ItemImages/Heat-Exchangers/Air-Cooled/XChanger-AA-2750_53393010_aa.jpg
View

Stock No.:

53393010

Used – Xchanger Inc. AA-2750 Air Cooled Heat Exchanger Skid – Dual Units, 24" Fan, 400 HP Motor

Used Xchanger Inc. AA-2750 Air Cooled Heat Exchanger Skid Dual Units, 24" Fan, 400 HP Motor. Aluminum Plate-Fins. 24" diameter fan, 8", 2" Inlets/Outlets. Includes Silencer rated 1.75 BAR, driven by an Approximate 400hp 3/60/460v 3575rpm motor. Birkett 4P6H411422/DS Safety Relief Valves. Mounted on Carbon Steel Frame. Includes Control Panel Skid on Carbon Steel Frame.

MFR: XChanger

Recently reduced items

https://images.aaronequipment.com/ItemImages/Mixers/Paddle-Mixer/Paul-O-Abbe_52919007_aa.jpeg
Submit Offer $5,190 View

Stock No.:

52919007

Used Paul O Abbe Stainless Steel Fluidizer – 0.7 Cu Ft for Sale

Used- Paul O Abbe Fluidizer, Stainless Steel. Approximate 0.7 cubic feet, 20 liter. Non jacketed trough, 16" wide x 18-1/2" long x 18-1/2" deep. (2) 1-1/2" diameter x 15" long shafts, each have (14) 3" long x 3" wide x 1/8" thick paddles on 1/2" diameter posts. Driven by (2) .33hp, 3/60/230/460 volt, 1700rpm motors, through a reducer 8:1. Bottom bombay doors. 9-1/2" Diameter bottom discharge, 20" discharge height. Includes mounted control panel. Mounted on (4) casters. Serial# A45254.

MFR: Paul O Abbe

https://images.aaronequipment.com/ItemImages/Mills/Hammer-Mill/Quadro-196_50647001_aa.jpg
View

Stock No.:

50647001

Used - Quadro Comil Model 196, 304/316 Stainless Steel, 8,000 Lbs/Hr Capacity, 10 HP

Used- Quadro Comil, Model 196, 304 Stainless Steel. Approximate capacity up to 8,000 pounds an hour. 8" diameter top feed, 12" diameter bottom discharge. 12' dia x 12' dia housing. Requires (missing) impeller and impeller hardware. Housing 304 stainless steel, shaft and discharge chute 316 stainless steel. Driven by a 10 hp, 3/60/208-230/460 Volt, 1750 rpm motor. Serial# 0387.

MFR: Quadro

https://images.aaronequipment.com/ItemImages/Dryers-Drying-Equipment/Rotary-Hot-Air/Summerlot_52919005_aa.jpeg
View

Stock No.:

52919005

Used Summerlot Engineered Products Dryer – 316 Stainless Steel

Used- Summerlot Engineered Products Dryer, 316 Stainless Steel. Cantilevered S/C. 12" long x 6" wide feed hopper, with a 3-3/4" diameter x 48" long screw, 3/4" pitch. Driven by a 1hp, 3/60/208-230/460 volt, 1755 rpm motor. Approximately 10" diameter x 136" long dryer vessel, with (4) fixed baffles. Driven by a 2hp, 3/60/230/460 volt, 1140 rpm motor through reducer, 5.76:1. Approximate 8" diameter discharge with a Flowseal valve. 36" Discharge height. Serial# 88211.

MFR: Summerlot

https://images.aaronequipment.com/ItemImages/Tanks/Stainless-1000-4999-Gal/Criveller_52555001_ac.jpeg
Submit Offer $4,500 View

Stock No.:

52555001

Criveller Ganimede 5.5 Ton Capacity, 1,200 Gallon Wine Fermentation Tank

Used- Criveller Ganimede Wine Fermentation Tank, 5.5 Ton Capacity, 1,200 Gallon, 304 Stainless Steel, Vertical. Approximate 68" diameter x 106" straight side. Coned top and bottom. Internal funneled diaphragm cone, (2) 2" side bypass stations. Approximate 40" wide section top dimple jacket. Openings top: 15.75" manway, side: 17" x 12" manway. (5) 2" side openings, 3" Center bottom outlet with valve, approximate 14" discharge height. Mounted on (4) stainless steel legs. Serial# 791-1. Reported new never installed. Approx. overall height is 15'2". ***The tank is made entirely of stainless steel, and the outer shell has been painted***

MFR: Criveller

Explore our guides.

Enhance your equipment knowledge with our resources.

August 20, 2026

Guide to Equipment Photography for Faster Sales

Learn equipment photography tips that can help sell used machinery faster, including 360° photos, clean backgrounds, spec tags, lighting, and image quality.

Blog Used Equipment

April 7, 2026

Everything You Should Know Before Buying Used Cannabis Equipment

The cannabis industry has been booming, and with this growth comes the need for efficient and cost-effective manufacturing solutions.

Cannabis Industry Blog

April 7, 2026

Everything You Should Know Before Buying A Used Stainless Steel Tank

What do you need to know before buying a stainless-steel tank?

Tanks Blog

Sell Equipment

Have surplus equipment? We offer flexible options including direct purchase, consignment, or listing on our marketplace — all backed by trusted professionals.

Learn about selling

Buy Used Equipment

Discover one of the world’s largest inventories of used processing and packaging equipment — ready to ship and backed by decades of industry expertise.

Browse all equipment

Auctions

Join global buyers and sellers at AIS-hosted auctions featuring top-quality surplus equipment from leading facilities around the world.

View current auctions