August 20, 2026
Guide to Equipment Photography for Faster Sales
Learn equipment photography tips that can help sell used machinery faster, including 360° photos, clean backgrounds, spec tags, lighting, and image quality.
Discover a wide range of used processing and packaging machinery tailored to meet your industry needs. Use our advanced search features to find the perfect equipment quickly and efficiently.
Cannabis Equipment
5 subcategories
Dryers - Drying Equipment
13 subcategories
Mills
10 subcategories
Packaging Equipment
40 subcategories
72 Categories
(1)
(63)
(46)
(60)
(23)
(29)
(27)
(26)
(42)
(21)
(9)
(33)
(24)
(51)
(23)
(15)
(63)
(3)
(25)
(59)
(37)
(11)
(20)
(23)
(1)
(5)
(6)
746 Manufacturers
Browse all equipmentStock No.:
54627001Used- Makwell Machinery Vacuum Emulsifying Mixer, MWM-350L. 316L stainless steel contact parts. 350 liter design capacity, 300 liter maximum working capacity, 110 liter minimum working capacity. Components include emulsifying pot, oil pot, and water pot. Features hydraulic lifting and tilting system, upper homogenizer/sweep wall stirrer, vacuum pump, and temperature controller. With platform, 72 kW steam generator, 500 liter storage tank, 1,000 liter/hour diaphragm pump, and transfer pump. Built 2023.
MFR: Makwell
Stock No.:
70053034Used- Pharmatech deduster metal detector combination unit, model Combi 500 ST, stainless steel product contact surfaces, Pharmatech tower tablet deduster with Safeline metal check with reject, mounted on unitized base, 230 volt, serial# 0404604,
Stock No.:
54612001Used ACS (Atlantes Chemical Systems) Plate and Frame Filter Press. Approximately (20) 24" x 24" Polypropylene Filter Plates. Unit is mounted on a heavy-duty steel frame and includes a hydraulic plate-closing system, lower cake-discharge hopper.
MFR: ACS
Stock No.:
54613001Unused- Gas Chilling, Deoxygenation and Dehydration Skid. 600 to 1,200 SCFM flow capacity. High methane gas service. 0.4 mol % inlet oxygen (design), 0.1% vol outlet oxygen. 7 lbs/MMSCF outlet moisture. 40 degrees F gas chill temperature. 130 to 170 psig at full flow operating pressure (deoxygenation/dryer). -4 psig low-pressure chilling inlet capability. 200 psig vessel design pressure. -20 to 100 degrees F ambient design range. 90kW electric trim heater, 35kW electric regeneration heater. System process flow: Section 1- Chilling/dehydration; Section 2- oxygenation removal (deoxygenation); Section 3- Moisture removal (TSA dryer). 3/60/480V. Built 2025.
Stock No.:
54601001Used- Cat Solar Turbines Turbine Package. Approximate output of 3.5 MW per unit/Approximately 7 MW total. Natural gas powered. Consists of (2) Solar Turbine Model Centaur 40; Exhaust systems; Gas-fired burner systems; Associated electrical infrastructure. Configured for venting or integration with steam generation systems. Serial# HG85083 and HG85093. Reported approximate 30,000 operating hours.
MFR: Solar
Stock No.:
54620001Used Jenbacher JGS-416 1.127 MW Natural Gas Generator Package 4,160V Enclosed Power Generation System. Rated 1.127 MW. Approximately 96% generator efficiency. Includes fully enclosed transportable weatherproof building and switchgear. 1800 RPM. 1573 bhp motor. 60hz/4160V. Built 2011. Reported 72,000 hours.
MFR: Jenbacher
Stock No.:
54620002Used- Jenbacher Natural Gas Generator Package, Model JGS-416. Rated 1.127 MW. Approximately 96% generator efficiency. Includes fully enclosed transportable weatherproof building and switchgear. 1800 RPM. 1573 bhp motor. 60hz/4160V. Built 2011. Reported 67,000 hours.
MFR: Jenbacher
Stock No.:
70120010Used Stainless Steel Inclined Conveyor | Hopper Feed Elevator Conveyor System. Hopper's opening is 28" wide by 63 3/4" long. There is a sliding cover for the hopper. The hopper has an estimated 100 cu ft capacity. There are 2 product sensors with two reflectors. The conveyors have a width of 32". The elevator's conveyor has some broken lifters. The discharge height is 120", and there are adjustable feet that can bring it up another 4". The motors are 265/460 vac 3 ph. overall dimensions are 62" wide by 292" long by 138.5" tall. Last used for running plastic bottles.
Stock No.:
54383002Used General Boiler, Electric, Series L, Model GE504-CS-480-3-H-COMBO. Output: 504 kW / 1,773 lbs/ hour. Rated 15 psi, Power: 480V, 3-phase, 607 amps, Dual feed pumps, Carbon Steet construction. ASME H certified. Control panel. Unitized on common base. S/n 3148. Yr. 2013
Stock No.:
52919007Used- Paul O Abbe Fluidizer, Stainless Steel. Approximate 0.7 cubic feet, 20 liter. Non jacketed trough, 16" wide x 18-1/2" long x 18-1/2" deep. (2) 1-1/2" diameter x 15" long shafts, each have (14) 3" long x 3" wide x 1/8" thick paddles on 1/2" diameter posts. Driven by (2) .33hp, 3/60/230/460 volt, 1700rpm motors, through a reducer 8:1. Bottom bombay doors. 9-1/2" Diameter bottom discharge, 20" discharge height. Includes mounted control panel. Mounted on (4) casters. Serial# A45254.
MFR: Paul O Abbe
Stock No.:
52919005Used- Summerlot Engineered Products Dryer, 316 Stainless Steel. Cantilevered S/C. 12" long x 6" wide feed hopper, with a 3-3/4" diameter x 48" long screw, 3/4" pitch. Driven by a 1hp, 3/60/208-230/460 volt, 1755 rpm motor. Approximately 10" diameter x 136" long dryer vessel, with (4) fixed baffles. Driven by a 2hp, 3/60/230/460 volt, 1140 rpm motor through reducer, 5.76:1. Approximate 8" diameter discharge with a Flowseal valve. 36" Discharge height. Serial# 88211.
MFR: Summerlot
Stock No.:
50028005Unused- JBT Foodtech FORMCOOK Progrill Contact Cooker. Model PB-1542 Electric ProBake. With 10 Degree Incline and Top Belt. Overall Belt Width 60". Usable Belt Width 59", Cooking Length 13.78'. Seven Lower Electric Platens, Upper and Lower Teflon Style Belting. Electrical Specifications 460/3/60 (110/1/60), Electric Drive, Basic Belt Cleaning System, Digital Read-out System, 12" Out-feed Conveyor, Standard Exhaust Fan. Controllogix Processor disconnects on all motors. HMI Screen A. Platens 3/60/460 / 1/60/110 Electric Drive.
Stock No.:
52038001Used- Paul O Abbe Ball Mill / Pebble Mill, Carbon Steel. Approximate 26 Gallon Total Volume. Jacket chamber approximate 18" diameter x 24-1/2" long. Driven by a 3hp, 3/220/440 volt motor. Rotary unions. Manhole cover. Mounted on a painted carbon steel frame.
Explore our guides.
Enhance your equipment knowledge with our resources.
August 20, 2026
Guide to Equipment Photography for Faster Sales
Learn equipment photography tips that can help sell used machinery faster, including 360° photos, clean backgrounds, spec tags, lighting, and image quality.
April 7, 2026
Everything You Should Know Before Buying Used Cannabis Equipment
The cannabis industry has been booming, and with this growth comes the need for efficient and cost-effective manufacturing solutions.
April 7, 2026
Everything You Should Know Before Buying A Used Stainless Steel Tank
What do you need to know before buying a stainless-steel tank?
Sell Equipment
Have surplus equipment? We offer flexible options including direct purchase, consignment, or listing on our marketplace — all backed by trusted professionals.
Buy Used Equipment
Discover one of the world’s largest inventories of used processing and packaging equipment — ready to ship and backed by decades of industry expertise.
Auctions
Join global buyers and sellers at AIS-hosted auctions featuring top-quality surplus equipment from leading facilities around the world.