CALL 630-350-2200
View All Equipment Auctions OEM & New Equipment
Appraisals Equipment Reconditioning Asset Management Plant Liquidation Financing Centrifuge Parts & Services
Company Overview Meet Our Team Locations & Contact

Explore our extensive equipment marketplace

Discover a wide range of used processing and packaging machinery tailored to meet your industry needs. Use our advanced search features to find the perfect equipment quickly and efficiently.

Recently added products

Clear
https://images.aaronequipment.com/ItemImages/Plastics-Equipment/Extruders-Single-Screw-Extruder/Davis-Standard-600S-Therm_54506010_aa.jpg
View

Stock No.:

54506010

Used & Reconditioned Davis-Standard 600S Thermatic 6" Single Screw Extruder – 300 HP, 30:1 L/D, Reconditioned in 2025

Used & Reconditioned Davis-Standard 600S Thermatic 6" Single Screw Extruder 300 HP, 30:1 L/D, Reconditioned in 2025. Features a 30:1 L/D ratio with a PE/PP screw and a 17.21:1 gearbox ratio. Powered by a new 300 HP Westinghouse AC motor with a new WEG AC inverter drive. Equipped with a refurbished 10-zone control panel consisting of six barrel heating zones and four downstream zones, all fitted with new Eurotherm 3216 temperature controllers. Gearbox has been rebuilt with all internal bearings replaced except the thrust bearing. Serial No. F-9731, S.O. 901180. Electrical requirements are 460 Volt, 3 Phase, 60 Hz. Approximate overall dimensions are 242" L x 74" W x 102" H with an estimated weight of 23,000 lbs. Originally built in 1998, reconditioned in 2025.

MFR: Davis Standard

https://images.aaronequipment.com/ItemImages/Plastics-Equipment/Extruders-Single-Screw-Extruder/PTI-6000_54506011_aa.jpg
View

Stock No.:

54506011

Used PTI 6000 6" Single Screw Extruder – 400 HP, 30:1 L/D, WEG Drive & Flender Gearbox

Used PTI 6000 6" Single Screw Extruder 400 HP, 30:1 L/D, WEG Drive & Flender Gearbox. Features a 30:1 L/D ratio with an air-cooled barrel, seven barrel heating zones, and sixteen downstream heating zones. Driven by a 400 HP WEG AC motor with WEG CFW-11 inverter drive and a Flender Model SZNF 390 gearbox featuring a 21.7:1 ratio and rated for up to 701 HP. Includes a 9" L x 7" W feed throat, 62" centerline height, 900-amp disconnect, and electrical requirements of 460 Volt, 3 Phase, 60 Hz (780 FLA). Mounted on V-groove casters for ease of positioning. Serial No. 3768. Approximate overall dimensions are 24' L x 100" W x 106" H with an estimated weight of 26,000 lbs. Built 2003.

MFR: PTI

https://images.aaronequipment.com/ItemImages/Plastics-Equipment/Extruders-Single-Screw-Extruder/Welex-60-30D_54506012_aa.jpg
View

Stock No.:

54506012

Used Welex 6.0 30D 6" Single Screw Extruder – 500 HP, 30:1 L/D, Vented Barrel with Dynisco Hydraulic Screen Changer

Used Welex 6.0 30D 6" Single Screw Extruder 500 HP, 30:1 L/D, Vented Barrel with Dynisco Hydraulic Screen Changer. Featuring a 30:1 L/D ratio with an air-cooled, vented barrel (vent currently plugged) located approximately 120" from the center of the feed throat. Equipped with six barrel heating zones, nine die heating zones, Tempco Cool Touch heater bands, and a direct-driven Koellmann gearbox with an 8.7:1 ratio. Driven by a 500 HP Reliance AC motor rated for up to 200 screw RPM. Includes a 10" L x 8" W feed throat, 68" centerline height, and a 6" Dynisco hydraulic screen changer complete with hydraulic power unit. Electrical requirements are 460 Volt, 3 Phase, 60 Hz. Previously operated on PET resin. AC drive is not included. Approximate overall dimensions are 330" L x 84" W x 102" H with an estimated weight of 37,000 lbs.

MFR: Welex

https://images.aaronequipment.com/ItemImages/Dryers-Drying-Equipment/Belt-Dryers/Belt-O-Matic-320B_51487002_aa.jpg
View

Stock No.:

51487002

Industrial Used Belt O Matic Belt Dryer Model 320B – High-Efficiency Continuous Drying

Used Belt O Matic Belt Dryer, Model 320B. 6 5" wide by 245" long; 3 phase/480 Volt/40 Amps;LP/natural gas; 5-7 PSI pressure Range; 1,000,000 BTU rating; 10,000 maximum CFM; 7.5 HP fan, maximum drying air temperature 250 degrees F. Built 2017. Last ran wet coffee grounds.

MFR: Belt-O-Matic

https://images.aaronequipment.com/ItemImages/Blowers/Blowers/Chicago-Blower-Size-300_10128113_aa.jpg
View

Stock No.:

10128113

Used Chicago Blower Size 300 Centrifugal Fan | 60 HP Industrial Blower System

Used Chicago Blower Size 300 Centrifugal Fan | 60 HP Industrial Blower System. Size 300. Rated up to 18,000 cfm @ 15.3 SP. Serial number 308227. Inlet 30" diameter with cone to 42" diameter. Outlet 32" x 23.5"" with damper. Overall size " wide x " tall x " long. Motor 60 HP. Electrical power 230/460 vac 3 phase. OAL dimensions 84" wide x 80" long x 71" tall.

MFR: Chicago Blower

https://images.aaronequipment.com/ItemImages/Screeners-Sifters/Circular-Screeners/Sweco-LX60C168_10755166_aa.jpg
View

Stock No.:

10755166

Used Sweco LX60C168 60” Low Profile Screener – Single Deck, 3D Motion, Spare Motor & Springs, Built 2024

Used- Sweco Model LX60C168 60" Single Deck Low Profile Screener. The Sweco LX Low Profile Flow-Thru Separator allows for high capacity wet or dry scalping in a compact, low headroom design. Dual .69 hp motors mounted on opposite sides of the LX allow unrestricted flow of material and create the 3-D motion that allows oversize material full discharge, keeping the screen clear for maximum product flow. Low headroom requirements (as little as 15 inches) and straight flow design, allow the LX to fit easily into existing product lines without reworking the entire system. 12" center bottom outlet. Includes used spare motor, and six (6) spare springs. Unit is mounted on a 27" high base. No lid. " screen installed. 230-460/3/60-volt input. Serial# 554445-A-09/24, built 2024.

MFR: Sweco

https://images.aaronequipment.com/ItemImages/Plastics-Equipment/Size-Reduction-Dual-Rotor-or-Single-Rotor-Shredders/Vecoplan_10755173_aa.jpg
View

Stock No.:

10755173

Used Vecoplan RG42/60XL Shredding System – 60 HP, Double-Row Cutter Rotor, Infeed/Discharge Conveyors, OEM Controls

Used- Vecoplan Model RG42/60XL Shredding Package.15" diameter rotor with double row of 48 total cutters. Single counter knife. Powered by a 60 HP 460-volt motor through a Flender gearbox. 51" x 42" chamber opening with 1.7 KW (2.2 HP) hydraulic ram. Gravity discharge. Mounted on a 24" tall riser base. Hopper has a 89" x 80 feed opening with forklift unload rails, and has an in-feed height of 120". 3/8" holes screens installed. Machine base is 108" x 85". With original OEM PanelView Plus 1000 control panel. Includes one shredder in-feed conveyor that is 12" wide x 21' long. 2" cleats on 24" centers. Powered by a 2 HP motor thru 30:1 gearbox. Also includes 12" wide x 12' long discharge conveyor with 2" cleats on 24" centers. Powered by a 1 HP motor thru 30:1 gearbox. 460/3/60 operation. 81.2 FLA.Built 2008, Serial# 11357010.

MFR: Vecoplan

https://images.aaronequipment.com/ItemImages/Screeners-Sifters/Circular-Screeners/Sweco-LS60C_47852016_aa.jpg
View

Stock No.:

47852016

Used Sweco 60" Vibro Energy Separator – Model LS60C, Stainless Steel, Single Deck

Used- Sweco 60" Vibro Energy Separator, Model LS60C, Stainless Steel. Single Deck. Driven by a 2.5hp, 3/60/460 volt motor. Includes top cover. Serial# LS60-481-54. Incomplete.

MFR: Sweco

https://images.aaronequipment.com/ItemImages/Plastics-Equipment/Slitting-Machinery/Dusenberry-Engr-815LR_48039002_aa.jpg
View

Stock No.:

48039002

Used Dusenbery 60” Slitter – Model 815 LR, Duplex Design, 3” Rewind Shafts

Used- Dusenbery 60" Slitter, Model 815 LR. Duplex design with 3" rewind shafts. 2 Motor design with (1) 15 hp GE DC motor and (1) 7.5 hp GE DC motor. Razor in groove slitting with six razor knife holders and six female grooved sections. Duplex rewind with 3" core shafts and set of lay on roll arms for each shaft with one lay on roll each. 65" Wide x 40" to 60" diameter unwind stand with 3" shaft. Fife guide design with disc brake clutch. Includes drive cabinet with drives and control panel. Serial # 54750.

MFR: Dusenberry Engr

https://images.aaronequipment.com/ItemImages/Kettles/Stainless-Steel-0-499-Gallon/Groen-DTA-3-60-SP_52905001_aa.jpg
View

Stock No.:

52905001

Groen Model DTA-3-60 SP Twin 60 Gallon Kettles

Used-Groen Model DTA-3-60 SP Twin 60 Gallon Kettles with Twin Pivoting Agitator. National Board stamped jackets rated 45 PSI @ 300 Deg F. Stainless steel common frame, rinse faucet. Elec: 3/60/230/460V.

MFR: Groen

https://images.aaronequipment.com/ItemImages/Coating-Pans/Coating-Pans/O'Hara-FC60XC_53213002_aa.jpeg
View

Stock No.:

53213002

Used O'Hara FC60XC 60" FastCoat Automatic Tablet Coating System | 360 kg Capacity | AHU, Pumps & Blower Included | 2011

Used O'Hara FC60XC 60" FastCoat Automatic Tablet Coating System | 360 kg Capacity | AHU, Pumps & Blower Included | 2011, SN 4064, New 2011. This unit features main pan, spray arm with guns, spray pump, electric and pneumatic panels in utility area, steam heated AHU on mezzanine, 50 hp blower, capacity is 360kg @ 0.8kg/L. 3/60/460V. With air handler, tray drying scrubber, pump, blower.

MFR: O'Hara

https://images.aaronequipment.com/ItemImages/Coating-Pans/Coating-Pans/O'Hara-FC60XC_53213003_aa.jpeg
View

Stock No.:

53213003

Used O’Hara 60" FC60XC High-Capacity Automatic Tablet Coater | 360 kg Batch System with AHU & Blower

Used O'Hara 60" FC60XC High-Capacity Automatic Tablet Coater | 360 kg Batch System with AHU & Blower, SN 4063, New 2011. This unit features main pan, spray arm with guns, spray pump, electric and pneumatic panels in utility area, steam heated AHU on mezzanine, 50 hp blower, capacity is 360kg @ 0.8kg/L. 3/60/460V. With air handler, tray drying scrubber, pump, blower.

MFR: O'Hara

Recently reduced items

https://images.aaronequipment.com/ItemImages/Mixers/Paddle-Mixer/Paul-O-Abbe_52919007_aa.jpeg
Submit Offer $5,190 View

Stock No.:

52919007

Used Paul O Abbe Stainless Steel Fluidizer – 0.7 Cu Ft for Sale

Used- Paul O Abbe Fluidizer, Stainless Steel. Approximate 0.7 cubic feet, 20 liter. Non jacketed trough, 16" wide x 18-1/2" long x 18-1/2" deep. (2) 1-1/2" diameter x 15" long shafts, each have (14) 3" long x 3" wide x 1/8" thick paddles on 1/2" diameter posts. Driven by (2) .33hp, 3/60/230/460 volt, 1700rpm motors, through a reducer 8:1. Bottom bombay doors. 9-1/2" Diameter bottom discharge, 20" discharge height. Includes mounted control panel. Mounted on (4) casters. Serial# A45254.

MFR: Paul O Abbe

https://images.aaronequipment.com/ItemImages/Dryers-Drying-Equipment/Rotary-Hot-Air/Summerlot_52919005_aa.jpg
View

Stock No.:

52919005

Used Summerlot Engineered Products Dryer – 316 Stainless Steel

Used- Summerlot Engineered Products Dryer, 316 Stainless Steel. Cantilevered S/C. 12" long x 6" wide feed hopper, with a 3-3/4" diameter x 48" long screw, 3/4" pitch. Driven by a 1hp, 3/60/208-230/460 volt, 1755 rpm motor. Approximately 10" diameter x 136" long dryer vessel, with (4) fixed baffles. Driven by a 2hp, 3/60/230/460 volt, 1140 rpm motor through reducer, 5.76:1. Approximate 8" diameter discharge with a Flowseal valve. 36" Discharge height. Serial# 88211.

MFR: Summerlot

https://images.aaronequipment.com/ItemImages/Dryers-Drying-Equipment/Oven/PB-1542_50028005_aa.jpg
View

Stock No.:

50028005

Unused JBT Foodtech FORMCOOK Progrill Contact Cooker – Model PB-1542 Electric ProBake

Unused- JBT Foodtech FORMCOOK Progrill Contact Cooker. Model PB-1542 Electric ProBake. With 10 Degree Incline and Top Belt. Overall Belt Width 60". Usable Belt Width 59", Cooking Length 13.78'. Seven Lower Electric Platens, Upper and Lower Teflon Style Belting. Electrical Specifications 460/3/60 (110/1/60), Electric Drive, Basic Belt Cleaning System, Digital Read-out System, 12" Out-feed Conveyor, Standard Exhaust Fan. Controllogix Processor disconnects on all motors. HMI Screen A. Platens 3/60/460 / 1/60/110 Electric Drive.

https://images.aaronequipment.com/ItemImages/Pumps/Stainless-Centrifugal/APV-Crepaco-W20-20_53011006_aa.jpeg
Submit Offer $2,375 View

Stock No.:

53011006

High-Efficiency APV Crepaco W20/20 Pump – 105 GPM, 3500 RPM

High-Efficiency APV Crepaco W20/20 Pump 105 GPM, 3500 RPM. Approximate 105 gallons per minute, 95 head feet @ 3500 rpm. Approximate 2" inlet, 2" outlet. Driven by a 5hp, 3/60/230/460 volt, 3500 rpm motor. Serial# H-9296-95.

MFR: APV/Crepaco

Explore our guides.

Enhance your equipment knowledge with our resources.

August 20, 2026

Guide to Equipment Photography for Faster Sales

Learn equipment photography tips that can help sell used machinery faster, including 360° photos, clean backgrounds, spec tags, lighting, and image quality.

Blog Used Equipment

April 7, 2026

Everything You Should Know Before Buying Used Cannabis Equipment

The cannabis industry has been booming, and with this growth comes the need for efficient and cost-effective manufacturing solutions.

Cannabis Industry Blog

April 7, 2026

Everything You Should Know Before Buying A Used Stainless Steel Tank

What do you need to know before buying a stainless-steel tank?

Tanks Blog

Sell Equipment

Have surplus equipment? We offer flexible options including direct purchase, consignment, or listing on our marketplace — all backed by trusted professionals.

Learn about selling

Buy Used Equipment

Discover one of the world’s largest inventories of used processing and packaging equipment — ready to ship and backed by decades of industry expertise.

Browse all equipment

Auctions

Join global buyers and sellers at AIS-hosted auctions featuring top-quality surplus equipment from leading facilities around the world.

View current auctions