CALL 630-350-2200
View All Equipment Auctions OEM & New Equipment
Appraisals Equipment Reconditioning Asset Management Plant Liquidation Financing Centrifuge Parts & Services
Company Overview Meet Our Team Locations & Contact

Explore our extensive equipment marketplace

Discover a wide range of used processing and packaging machinery tailored to meet your industry needs. Use our advanced search features to find the perfect equipment quickly and efficiently.

Recently added products

Clear
https://images.aaronequipment.com/ItemImages/Centrifuges/Decanter/Sharples-P660_14191145_aa.jpg
View

Stock No.:

14191145

Used Sharples P-660 Decanter Centrifuge | 6000 RPM | Stainless Steel | 7.5 HP Main Drive | Mounted w/ Vibration Isolation

Used Sharples P-660 Decanter Centrifuge | 6000 RPM | Stainless Steel | 7.5 HP Main Drive | Mounted w/ Vibration Isolation. Stainless Steel. Main drive motor 7.5 hp 3/60/230-460 volts, fixed speed. Backdrive motor2 hp 3/60/208 230-460 volts fixed speed. 6000 rpm max speed, 95:1 gearbox. Mounted on table with vibration isolators.

MFR: Sharples

https://images.aaronequipment.com/ItemImages/Kettles/Stainless-Steel-0-499-Gallon/Vulcan-K6ETT_409352_aa.jpg
Submit Offer $5,000 View

Stock No.:

409352

Pre-Owned Vulcan K6ETT Electric Counter Kettle | 6 Gal | 50 PSI

Used Vulcan-Hart Model K6ETT Electric Counter Tilting Kettle, 6 Gallon Capacity. Approximately 11.8" Diameter x 14-1/2" deep. Ellipsoidal bottom. 2/3 Jacketed rated 50psi at -20 to 300 degrees F. Frame mounted. National board# 21596, Serial# 46-3002235, Built 2011. 3/1PH 50/60HZ 8/10KW 208/240V requirements.

MFR: Vulcan

https://images.aaronequipment.com/ItemImages/Mixers/Plow-Mixer/Lodige-FKM600D_47890001_aa.jpg
Submit Offer $7,220 View

Stock No.:

47890001

Lodige FKM600D Plow Mixer

Used- Lodige Batch Type Plow Mixer, Model FKM600D. 6 Cubic Feet Working Capacity (10 Total), 304 Stainless Steel. Non-jacketed mixing chamber approximate 32" diameter x 50" long. 4" Diameter shaft with (3) bolt on plows and (2) bolt on end scrappers. (2) Approximate 18" x 15-1/2" side access doors. Top openings (2) 12". 9" x 7" Bottom outlet with a manual operated door, air purge seals. Driven by an approximate 10 hp motor thru Falk reducer. Includes a control panel with an Allen-Bradley PanelView 600 and a SLC 5/04 CPU. Mounted on a carbon steel stand. Serial # 9046.

MFR: Lodige

https://images.aaronequipment.com/ItemImages/Plastics-Equipment/Extruders-Single-Screw-Extruder/Davis-Standard-Thermatic_54506008_aa.jpg
View

Stock No.:

54506008

Used & Reconditioned Davis-Standard Thermatic 60IN60 6" Single Screw Extruder – 400 HP, 24:1 L/D, Thermatic Clamp

Used & Reconditioned Davis-Standard Thermatic 60IN60 6" Single Screw Extruder 400 HP, 24:1 L/D, Thermatic Clamp. 24:1 L/D ratio, water-cooled barrel, integrated water reservoir, recirculation pump, and heat exchanger. Equipped with a 17.21:1 gearbox rated for 424 HP capacity with a 1.5 service factor, powered by a new 400 HP TECO AC motor (Model EPS4004, 1,800 RPM, 449TX frame) and new TECO AC drive (Model EQ7-4450-C). Includes five barrel heating zones and six die heating zones with new Novus temperature controllers and amp gauges, swing-arm operator station with speed pod, pressure and screw speed gauges, and a 42" centerline height. Fitted with a Thermatic clamp and barrier flight screw; screw and barrel are within serviceable tolerances. Heater bands have been electrically tested, barrel plumbing and heat exchangers have been flow checked, and five new Red Hat solenoid valves have been installed. Approximate overall dimensions are 216" L x 80" W x 90" H. Originally built 2004.

MFR: Davis Standard

https://images.aaronequipment.com/ItemImages/Plastics-Equipment/Extruders-Single-Screw-Extruder/Davis-Standard-60IN60TPIH_54506009_aa.jpg
View

Stock No.:

54506009

Used Davis-Standard 60IN60TPIH 6" Single Screw Extruder – 34:1 L/D, 400 HP, Vented Barrel with ABB Drive

Used Davis-Standard 60IN60TPIH 6" Single Screw Extruder 34:1 L/D, 400 HP, Vented Barrel with ABB Drive. Features a 34:1 L/D ratio with a water-cooled, vented barrel incorporating six cooling zones; vent is located approximately 130" from the center of the feed throat and is currently plugged. Cooling system includes a 1/2 HP recirculation pump, heat exchanger, and 32" x 24" x 12" water reservoir. Driven by a 400 HP WEG AC motor (1,790 RPM) with ABB AC drive and a Davis-Standard Model 60IN60TPIH gearbox featuring a 17.2:1 ratio and rated for 526 HP with a 1.5 service factor. Temperature controls include six-barrel zone Solo 4896 controllers and seven die zone Omron E5EC controllers. Operator controls feature a speed pod with screw RPM, motor load percentage, and pressure transducer gauges. Includes hopper, 42" centerline height, and serial number PT238. Approximate footprint is 25' L x 8' W. Built 1994.

MFR: Davis Standard

https://images.aaronequipment.com/ItemImages/Plastics-Equipment/Extruders-Single-Screw-Extruder/Davis-Standard-600S-Therm_54506010_aa.jpg
View

Stock No.:

54506010

Used & Reconditioned Davis-Standard 600S Thermatic 6" Single Screw Extruder – 300 HP, 30:1 L/D, Reconditioned in 2025

Used & Reconditioned Davis-Standard 600S Thermatic 6" Single Screw Extruder 300 HP, 30:1 L/D, Reconditioned in 2025. Features a 30:1 L/D ratio with a PE/PP screw and a 17.21:1 gearbox ratio. Powered by a new 300 HP Westinghouse AC motor with a new WEG AC inverter drive. Equipped with a refurbished 10-zone control panel consisting of six barrel heating zones and four downstream zones, all fitted with new Eurotherm 3216 temperature controllers. Gearbox has been rebuilt with all internal bearings replaced except the thrust bearing. Serial No. F-9731, S.O. 901180. Electrical requirements are 460 Volt, 3 Phase, 60 Hz. Approximate overall dimensions are 242" L x 74" W x 102" H with an estimated weight of 23,000 lbs. Originally built in 1998, reconditioned in 2025.

MFR: Davis Standard

https://images.aaronequipment.com/ItemImages/Plastics-Equipment/Extruders-Single-Screw-Extruder/PTI-6000_54506011_aa.jpg
View

Stock No.:

54506011

Used PTI 6000 6" Single Screw Extruder – 400 HP, 30:1 L/D, WEG Drive & Flender Gearbox

Used PTI 6000 6" Single Screw Extruder 400 HP, 30:1 L/D, WEG Drive & Flender Gearbox. Features a 30:1 L/D ratio with an air-cooled barrel, seven barrel heating zones, and sixteen downstream heating zones. Driven by a 400 HP WEG AC motor with WEG CFW-11 inverter drive and a Flender Model SZNF 390 gearbox featuring a 21.7:1 ratio and rated for up to 701 HP. Includes a 9" L x 7" W feed throat, 62" centerline height, 900-amp disconnect, and electrical requirements of 460 Volt, 3 Phase, 60 Hz (780 FLA). Mounted on V-groove casters for ease of positioning. Serial No. 3768. Approximate overall dimensions are 24' L x 100" W x 106" H with an estimated weight of 26,000 lbs. Built 2003.

MFR: PTI

https://images.aaronequipment.com/ItemImages/Plastics-Equipment/Extruders-Single-Screw-Extruder/Welex-60-30D_54506012_aa.jpg
View

Stock No.:

54506012

Used Welex 6.0 30D 6" Single Screw Extruder – 500 HP, 30:1 L/D, Vented Barrel with Dynisco Hydraulic Screen Changer

Used Welex 6.0 30D 6" Single Screw Extruder 500 HP, 30:1 L/D, Vented Barrel with Dynisco Hydraulic Screen Changer. Featuring a 30:1 L/D ratio with an air-cooled, vented barrel (vent currently plugged) located approximately 120" from the center of the feed throat. Equipped with six barrel heating zones, nine die heating zones, Tempco Cool Touch heater bands, and a direct-driven Koellmann gearbox with an 8.7:1 ratio. Driven by a 500 HP Reliance AC motor rated for up to 200 screw RPM. Includes a 10" L x 8" W feed throat, 68" centerline height, and a 6" Dynisco hydraulic screen changer complete with hydraulic power unit. Electrical requirements are 460 Volt, 3 Phase, 60 Hz. Previously operated on PET resin. AC drive is not included. Approximate overall dimensions are 330" L x 84" W x 102" H with an estimated weight of 37,000 lbs.

MFR: Welex

https://images.aaronequipment.com/ItemImages/Air-Conditioners/Air-Conditioners/ISRTU1-I100-15-6T_54428006_aa.jpg
View

Stock No.:

54428006

Unused Inspire Canopy Series 6 Ton Rooftop Air Conditioner ISRTU1-I.100-15-6T – Commercial HVAC Unit (2023)

Unused- Inspire Canopy Series Air Conditioner, Model ISRTU1-I.100-15-6T. Rated 6 nominal tons. Built 2023

https://images.aaronequipment.com/ItemImages/Plastics-Equipment/Extruders-Single-Screw-Extruder/54172001_aa.jpg
View

Stock No.:

54172001

Used Huaxing Three-Stage 150mm (6") Extrusion Line – Model HXSJ 150-DWM11

Used- Huaxing Three-Stage 150mm (6") Extrusion Line, Model HXSJ 150-DWM11. 30:1 L/D. Rated 600-1,000 kg (approx 1323-2205 lbs.) per hour. Consisting of: (1) 150mm x 4500mm (30:1) primary extruder, double vented w/ vacuum system and 2-stage filtration, and (1) 150mm x 1800mm (12:1) secondary extruder, single vented with 2-stage filtration, Driven by a 215hp 1785 rpm motor. One Crusher/compactor with infeed conveyor. Water bath strand cooling system with dewatering blowers, strand cutter, vibrating table, cooling tank, cooling tower, recirculation pumps, discharge vacuums, storage cyclone. pneumatic storage cyclone discharge. Main control panel. 60/480V. Built 2019. Previously used for PP and PE Plastics.

https://images.aaronequipment.com/ItemImages/Mills/3-Roll-or-More/Farrell-4-Roll-Inverted-L-_54180001_aa.jpeg
View

Stock No.:

54180001

Farrel Rubber/Plastic Laboratory Calender Mill – Inverted "L" 4-Roll, Adjustable Knives

Used- Farrel 4-Roll Inverted "L" Rubber/Plastic Laboratory Calendar Mill. 6" D x 13" L rolls. 500 degrees F max. roll temp. Up to 35 RPM. Fixed center roll w/ adjustable bottom, top, and offset. Full herringbone even speed gears on one side, Full herringbone friction gears on the other side. Nylon adjustable infeed guides. (2) adjustable twin knives on bottom roll. Cable safeties on both sides of frames. SCR drive w/ dynamic braking; Operators control station with variable speeds. Variable speed 7.5 HP motor. 3/460V. Serial# 73A1499.

MFR: Farrell

https://images.aaronequipment.com/ItemImages/Dryers-Drying-Equipment/Drum-Dryers/Buflovak-6-x-8-ADDD_54280001_ac.jpg
View

Stock No.:

54280001

Used Buflovak Atmospheric Double Drum Dryer | Model 6" x 8" ADDD | Pilot & R&D D

Used Buflovak Atmospheric Double Drum Dryer, Model 6" x 8" ADDD. 2 sq/ft Total drying surface area. Approximate 6" diameter x 8" face cored drum, rated 140-160 psig. Driven by a 1/2hp, 3/60/208-230/460 volt, 1725rpm motor through reducer 41.58:1 ratio. Blador VS drive. The dryer features twin chrome-plated drying drums with independent drum gap adjustment, stainless steel frame and safety guards, product feed trough with feed manifold, and doctor blade assembly. Compact unit is designed for drying slurries, purees, pastes, and other pumpable materials into flakes or powders and is well suited for R&D, product development, and small-scale production. Mounted on stainless steel frame. Job No. P1-00972, Serial# 2013-04, built 2013.

MFR: Buflovak

Recently reduced items

https://images.aaronequipment.com/ItemImages/Mixers/Paddle-Mixer/Paul-O-Abbe_52919007_aa.jpeg
Submit Offer $5,190 View

Stock No.:

52919007

Used Paul O Abbe Stainless Steel Fluidizer – 0.7 Cu Ft for Sale

Used- Paul O Abbe Fluidizer, Stainless Steel. Approximate 0.7 cubic feet, 20 liter. Non jacketed trough, 16" wide x 18-1/2" long x 18-1/2" deep. (2) 1-1/2" diameter x 15" long shafts, each have (14) 3" long x 3" wide x 1/8" thick paddles on 1/2" diameter posts. Driven by (2) .33hp, 3/60/230/460 volt, 1700rpm motors, through a reducer 8:1. Bottom bombay doors. 9-1/2" Diameter bottom discharge, 20" discharge height. Includes mounted control panel. Mounted on (4) casters. Serial# A45254.

MFR: Paul O Abbe

https://images.aaronequipment.com/ItemImages/Mills/Hammer-Mill/Quadro-196_50647001_aa.jpg
View

Stock No.:

50647001

Used - Quadro Comil Model 196, 304/316 Stainless Steel, 8,000 Lbs/Hr Capacity, 10 HP

Used- Quadro Comil, Model 196, 304 Stainless Steel. Approximate capacity up to 8,000 pounds an hour. 8" diameter top feed, 12" diameter bottom discharge. 12' dia x 12' dia housing. Requires (missing) impeller and impeller hardware. Housing 304 stainless steel, shaft and discharge chute 316 stainless steel. Driven by a 10 hp, 3/60/208-230/460 Volt, 1750 rpm motor. Serial# 0387.

MFR: Quadro

https://images.aaronequipment.com/ItemImages/Dryers-Drying-Equipment/Rotary-Hot-Air/Summerlot_52919005_aa.jpeg
View

Stock No.:

52919005

Used Summerlot Engineered Products Dryer – 316 Stainless Steel

Used- Summerlot Engineered Products Dryer, 316 Stainless Steel. Cantilevered S/C. 12" long x 6" wide feed hopper, with a 3-3/4" diameter x 48" long screw, 3/4" pitch. Driven by a 1hp, 3/60/208-230/460 volt, 1755 rpm motor. Approximately 10" diameter x 136" long dryer vessel, with (4) fixed baffles. Driven by a 2hp, 3/60/230/460 volt, 1140 rpm motor through reducer, 5.76:1. Approximate 8" diameter discharge with a Flowseal valve. 36" Discharge height. Serial# 88211.

MFR: Summerlot

https://images.aaronequipment.com/ItemImages/Dryers-Drying-Equipment/Oven/PB-1542_50028005_aa.jpg
View

Stock No.:

50028005

Unused JBT Foodtech FORMCOOK Progrill Contact Cooker – Model PB-1542 Electric ProBake

Unused- JBT Foodtech FORMCOOK Progrill Contact Cooker. Model PB-1542 Electric ProBake. With 10 Degree Incline and Top Belt. Overall Belt Width 60". Usable Belt Width 59", Cooking Length 13.78'. Seven Lower Electric Platens, Upper and Lower Teflon Style Belting. Electrical Specifications 460/3/60 (110/1/60), Electric Drive, Basic Belt Cleaning System, Digital Read-out System, 12" Out-feed Conveyor, Standard Exhaust Fan. Controllogix Processor disconnects on all motors. HMI Screen A. Platens 3/60/460 / 1/60/110 Electric Drive.

Explore our guides.

Enhance your equipment knowledge with our resources.

August 20, 2026

Guide to Equipment Photography for Faster Sales

Learn equipment photography tips that can help sell used machinery faster, including 360° photos, clean backgrounds, spec tags, lighting, and image quality.

Blog Used Equipment

April 7, 2026

Everything You Should Know Before Buying Used Cannabis Equipment

The cannabis industry has been booming, and with this growth comes the need for efficient and cost-effective manufacturing solutions.

Cannabis Industry Blog

April 7, 2026

Everything You Should Know Before Buying A Used Stainless Steel Tank

What do you need to know before buying a stainless-steel tank?

Tanks Blog

Sell Equipment

Have surplus equipment? We offer flexible options including direct purchase, consignment, or listing on our marketplace — all backed by trusted professionals.

Learn about selling

Buy Used Equipment

Discover one of the world’s largest inventories of used processing and packaging equipment — ready to ship and backed by decades of industry expertise.

Browse all equipment

Auctions

Join global buyers and sellers at AIS-hosted auctions featuring top-quality surplus equipment from leading facilities around the world.

View current auctions