CALL 630-350-2200
View All Equipment Auctions OEM & New Equipment
Appraisals Equipment Reconditioning Asset Management Plant Liquidation Financing Centrifuge Parts & Services
Company Overview Meet Our Team Locations & Contact

Explore our extensive equipment marketplace

Discover a wide range of used processing and packaging machinery tailored to meet your industry needs. Use our advanced search features to find the perfect equipment quickly and efficiently.

Recently added products

Clear
https://images.aaronequipment.com/ItemImages/Heat-Exchangers/Shell-and-Tube-Stainless/Ketema-MVHT-1-A-S_50467039_ad.jpg
Submit Offer $1,500 View

Stock No.:

50467039

Buy Used Ketema Shell & Tube Heat Exchanger – 3.2 Sq. Ft., High-Pressure Rated

Used- Ketema Shell & Tube Heat Exchanger, 3.2 Square Feet, Type MVHT-1-A-SS. (28) .375" diameter x 14" long 316 stainless steel tubes rated 300 psi and full vacuum at 650 degrees F. Carbon steel shell rated 150 psi at 400 degrees F. Size 4-Y-14. 1.5" tubes inlet/outlets, 1" shell inlet/outlets. Serial # WL-950429/2.

MFR: Ketema

https://images.aaronequipment.com/ItemImages/Heat-Exchangers/Shell-and-Tube-Stainless/Ketema-MVHT-1-A-S_50467040_ac.jpg
Submit Offer $1,500 View

Stock No.:

50467040

Used Ketema MVHT-1-A-SS Shell & Tube Heat Exchanger – 3.2 Sq. Ft., 300 PSI

Used- Ketema Type MVHT-1-A-SS Shell & Tube Heat Exchanger, 3.2 Square Feet. (28) .375" Diameter x 14" long 316 stainless steel tubes rated 300 psi and full vacuum at 650 degrees F. carbon steel shell rated 150 psi at 400 degrees F, Size 4-Y-14. 1.5" tubes inlet/outlets, 1" shell inlet/outlets. Serial # WL-950429/A1,

MFR: Ketema

https://images.aaronequipment.com/ItemImages/Plastics-Equipment/Extruders-Single-Screw-Extruder/Gloucester-35250R2_10755151_aa.jpg
View

Stock No.:

10755151

Gloucester Model 35250R2 3.5" Diameter Single Screw Extruder – Industrial Used

Used- Gloucester Model 35250R2 3.5" Diameter Single Screw Extruder. 3.5" diameter screw, 32:1 L/D. Has an electrically heated, air cooled, vented, and plugged barrel at approximately a 65? center line height. Barrel is set up for Contra-Cool but does not include blower. Gearbox has a reduction ratio of 18.17:1 and is direct driven in a wraparound manner by a 100 HP Baldor D/C motor with Saftronics SCR control. One (1) HP pump with heat exchanger on the gearbox. Originally manufactured in 1995 and completely reconditioned in 2011 and never put back into service. All wiring on the extruder is run to a terminal strip. New control panel has fourteen (14) zones of temperature controls. Drive control is loose. Includes three (3) new / rebuilt screws. 460/3/60. Serial# 36736/12.

MFR: Gloucester

https://images.aaronequipment.com/ItemImages/Mixers/Continuous-Mixer/Readco-3-1-2-HVY-DU_11453475_ah.jpg
View

Stock No.:

11453475

3.5" Readco Twin Screw Continuous Processor

Used- 3.5" Readco Twin Screw Continuous Processor, model 3 1/2 HVY DU. Heavy duty design, stainless steel product contact surfaces, jacketed barrel rated 150 psi at 600 f, cored shafts with rotary units, driven by 50 hp, 460 volt motor, machine currently set up with cantilevered screws with adjustable gap ribbon die, with spare set of screw splines set up for end bearing housing, on base. Mfg. 1987.

MFR: Readco

https://images.aaronequipment.com/ItemImages/Mixers/Plow-Mixer/J-H-Day-4_44604001_a.jpg
View

Stock No.:

44604001

Used J.H. Day Plow Type Turbulent Mixer – 304 Stainless Steel, 3.5 Cu. Ft. | High-Performance Industrial Mixer with Side-Entering Pinned Disc Mill

Used- J.H. Day Plow Type Turbulent Mixer, 304 Stainless Steel. 3.5 Cubic feet total capacity. Non-jacketed chamber approximately 20" diameter x 22" straight side. 3" Diameter shaft with blades and end scrapers. Driven by a 7.5 hp, 3/60/230/460 volt, 1800 rpm Sterling variable Speed-trol motor. Includes a side entering pinned disc mill, driven by a 10 hp, 3/60/230/460 volt, 3490 rpm motor. Top access door with a charge port, 8" center bottom outlet with a manually operated plug valve. Includes a control panel. Mounted on a carbon steel frame.

MFR: J H Day

https://images.aaronequipment.com/ItemImages/Plastics-Equipment/Pelletizing-Machinery-Strand-Pelletizers/Conair-304_53713026_aa.jpg
View

Stock No.:

53713026

Used Conair / Jetro Model 304 Strand Pelletizer – 600 lb/hr Plastic Pelletizing

Used Conair / Jetro Model 304 Strand Pelletizer 600 lb/hr Plastic Pelletizing Machine. Approximate capacity up to 600 lbs. per hour (depending on rotor and speed). Approximate 6" diameter x 4" face cutting rotor with 20 fixed blades. Approximate feed opening 3.5". Strand diameter 0.12", upper feed roll 3-1/4" diameter x 3-1/4" face, lower feed roll 1-9/16" diameter x 4" face. Driven by 2hp 3/60/230/460v 1750rpm XP motor. Serial# 6-040894.

MFR: Conair

https://images.aaronequipment.com/ItemImages/Plastics-Equipment/Size-Reduction-Grinders-and-Granulators/Granutec-1216PG-30_10128120_aa.jpg
View

Stock No.:

10128120

Used Granutec 1216PG-30 Plastic Granulator | 30 HP Industrial Plastic Grinder

Used Granutec 1216PG-30 Plastic Granulator | 30 HP Industrial Plastic Grinder. The serial number is 302-3795. The throat is 11" by 11". It has 7 knives. The motor is 30 hp and requires 230/460 vac 3 ph and goes 1760 rpm. On casters.

MFR: Granutec

https://images.aaronequipment.com/ItemImages/Plastics-Equipment/Size-Reduction-Grinders-and-Granulators/Tria-900-NS-R_10755147_aa.jpg
View

Stock No.:

10755147

Used Tria Model 900 NS-R Pull Roll Granulator – High-Performance Industrial Granulator

Used Tria Model 900 NS-R Pull Roll Granulator. 12.5" x 40" feed throat (1020mm x 320mm). Five (5) knife open rotor with two (2) bed knives. Rotor is belt driven by a 22 Kw (30 HP). Feed hopper with rear mounted 36" wide steel / serrated pull rolls. Air actuated feed rolls are powered by a 1 Kw (1.5 HP) A/C motor. 9" x 19.5" front material hopper entrance. 12.6 Kw (17 HP) blower discharge with Kongskilde OK160 piping and cyclone with filter bag. Approximate production rate of 400-600 kg/hr. (880-1320 lbs./hr.). Includes free standing panel with controls. 480/3/60

MFR: Tria

https://images.aaronequipment.com/ItemImages/Mills/Colloid-Mill/Ross-Industries-HSM-430SC_11059397_aa.jpg
View

Stock No.:

11059397

Used ROSS HSM-430SC Inline High Shear Mixer with SLIM Powder Injection System – 30 HP Explosion Proof Mixing Platform

Used ROSS HSM-430SC Inline High Shear Mixer with SLIM Powder Injection System 30 HP Explosion Proof Mixing Platform. Solids (powder) / Liquid Injection Manifold (SLIM). Equipped with 3" Liquid inlet, 2.5" Powder Inlet and 3" Liquid outlet. Driven by 30 HP, 208-230/460 volt, 1760 rpm Explosion Proof (XP) Motors. Powder / Liquid Dispersing / Mixing System. The Liquid stream enters the mixer and immediately encounters the powder (solids) at the high shear zone (rotor and stator assembly). The resulting dispersion is expelled centrifugally through the stator opening at high velocity.

MFR: Ross Industries

https://images.aaronequipment.com/ItemImages/Plastics-Equipment/Size-Reduction-Grinders-and-Granulators/Sprout-Bauer-DSF-1518_44496015_aa.jpg
Submit Offer $6,500 View

Stock No.:

44496015

Used Andritz Sprout-Bauer DSF1518 Granulator – 30HP, Film Granulation, 7 Knife Rotor

Used- Andritz Sprout-Bauer Granulator, Model DSF1518. 7 knife rotor, 2 bed knife. Driven by 30HP, 3/60/460 Volt only motor. Belt driven 5? x 18? blow-in in-feed hopper, vacuum take off discharge. Mounted on a short leg base. No starter or controls. Designed for film granulation. Serial# 2000-00373.

MFR: Sprout Bauer

https://images.aaronequipment.com/ItemImages/Plastics-Equipment/Size-Reduction-Grinders-and-Granulators/Sprout-Bauer-DSF-1518_44496016_f.jpg
Submit Offer $6,500 View

Stock No.:

44496016

Industrial Plastic Granulator – Andritz Sprout-Bauer DSF1518, 30HP, Film Recycling

Used- Andritz Sprout-Bauer Model DSF1518 Granulator. 7-knife rotor, 2 bed knife. Driven by 30 HP 460 volt only motor, belt drive. 5" X 18" blow-in in-feed hopper, vacuum take-off discharge. Mounted on a short leg base. No starter/controls. Designed for film granulation. Previously used for recycling polyester film edge trim.

MFR: Sprout Bauer

https://images.aaronequipment.com/ItemImages/Plastics-Equipment/Size-Reduction-Grinders-and-Granulators/Sprout-Bauer-1518_44496018_a.jpg
Submit Offer $6,500 View

Stock No.:

44496018

Used 30HP Plastic Granulator – Andritz Sprout-Bauer DSF1518, 7-Knife Rotor

Used- Andritz / Sprout-Bauer 30HP Model DSF1518 Granulator. 7-knife rotor, 2 bed knife. Driven by 30 HP 460 volt only motor, belt drive. 5" X 18" blow-in in-feed hopper, vacuum take-off discharge. Mounted on a short leg base. No starter/controls. Designed for film granulation. Previously used for recycling polyester film edge trim.

MFR: Sprout Bauer

Recently reduced items

https://images.aaronequipment.com/ItemImages/Mixers/Paddle-Mixer/Paul-O-Abbe_52919007_aa.jpeg
Submit Offer $5,190 View

Stock No.:

52919007

Used Paul O Abbe Stainless Steel Fluidizer – 0.7 Cu Ft for Sale

Used- Paul O Abbe Fluidizer, Stainless Steel. Approximate 0.7 cubic feet, 20 liter. Non jacketed trough, 16" wide x 18-1/2" long x 18-1/2" deep. (2) 1-1/2" diameter x 15" long shafts, each have (14) 3" long x 3" wide x 1/8" thick paddles on 1/2" diameter posts. Driven by (2) .33hp, 3/60/230/460 volt, 1700rpm motors, through a reducer 8:1. Bottom bombay doors. 9-1/2" Diameter bottom discharge, 20" discharge height. Includes mounted control panel. Mounted on (4) casters. Serial# A45254.

MFR: Paul O Abbe

https://images.aaronequipment.com/ItemImages/Mills/Hammer-Mill/Quadro-196_50647001_aa.jpg
View

Stock No.:

50647001

Used - Quadro Comil Model 196, 304/316 Stainless Steel, 8,000 Lbs/Hr Capacity, 10 HP

Used- Quadro Comil, Model 196, 304 Stainless Steel. Approximate capacity up to 8,000 pounds an hour. 8" diameter top feed, 12" diameter bottom discharge. 12' dia x 12' dia housing. Requires (missing) impeller and impeller hardware. Housing 304 stainless steel, shaft and discharge chute 316 stainless steel. Driven by a 10 hp, 3/60/208-230/460 Volt, 1750 rpm motor. Serial# 0387.

MFR: Quadro

https://images.aaronequipment.com/ItemImages/Dryers-Drying-Equipment/Rotary-Hot-Air/Summerlot_52919005_aa.jpeg
View

Stock No.:

52919005

Used Summerlot Engineered Products Dryer – 316 Stainless Steel

Used- Summerlot Engineered Products Dryer, 316 Stainless Steel. Cantilevered S/C. 12" long x 6" wide feed hopper, with a 3-3/4" diameter x 48" long screw, 3/4" pitch. Driven by a 1hp, 3/60/208-230/460 volt, 1755 rpm motor. Approximately 10" diameter x 136" long dryer vessel, with (4) fixed baffles. Driven by a 2hp, 3/60/230/460 volt, 1140 rpm motor through reducer, 5.76:1. Approximate 8" diameter discharge with a Flowseal valve. 36" Discharge height. Serial# 88211.

MFR: Summerlot

https://images.aaronequipment.com/ItemImages/Tanks/Stainless-1000-4999-Gal/54567010_aa.jpeg
View

Stock No.:

54567010

Used Paul Mueller 1,500 Gallon 304 Stainless Steel Tank

Used Paul Mueller Company stainless steel pressure vessel, Type 304 stainless steel construction, 76" diameter x Height 170" to top mixer. 145" to top hatch, Top hatch 24" diameter x Legs 56" x 56". Serial# 106184-1, built 1992. Vessel manufactured to DIN Part RT4 pressure vessel standards. Unit designed for heat transfer service with heating surface (exact area not legible). Tank is rated Atmospheric.

Explore our guides.

Enhance your equipment knowledge with our resources.

August 20, 2026

Guide to Equipment Photography for Faster Sales

Learn equipment photography tips that can help sell used machinery faster, including 360° photos, clean backgrounds, spec tags, lighting, and image quality.

Blog Used Equipment

April 7, 2026

Everything You Should Know Before Buying Used Cannabis Equipment

The cannabis industry has been booming, and with this growth comes the need for efficient and cost-effective manufacturing solutions.

Cannabis Industry Blog

April 7, 2026

Everything You Should Know Before Buying A Used Stainless Steel Tank

What do you need to know before buying a stainless-steel tank?

Tanks Blog

Sell Equipment

Have surplus equipment? We offer flexible options including direct purchase, consignment, or listing on our marketplace — all backed by trusted professionals.

Learn about selling

Buy Used Equipment

Discover one of the world’s largest inventories of used processing and packaging equipment — ready to ship and backed by decades of industry expertise.

Browse all equipment

Auctions

Join global buyers and sellers at AIS-hosted auctions featuring top-quality surplus equipment from leading facilities around the world.

View current auctions