CALL 630-350-2200
View All Equipment Auctions OEM & New Equipment
Appraisals Equipment Reconditioning Asset Management Plant Liquidation Financing Centrifuge Parts & Services
Company Overview Meet Our Team Locations & Contact

Explore our extensive equipment marketplace

Discover a wide range of used processing and packaging machinery tailored to meet your industry needs. Use our advanced search features to find the perfect equipment quickly and efficiently.

Recently added products

Clear
https://images.aaronequipment.com/ItemImages/Dryers-Drying-Equipment/Drum-Dryers/Buflovak-6-x-8-ADDD_54280001_ac.jpg
View

Stock No.:

54280001

Used Buflovak Atmospheric Double Drum Dryer | Model 6" x 8" ADDD | Pilot & R&D D

Used Buflovak Atmospheric Double Drum Dryer, Model 6" x 8" ADDD. 2 sq/ft Total drying surface area. Approximate 6" diameter x 8" face cored drum, rated 140-160 psig. Driven by a 1/2hp, 3/60/208-230/460 volt, 1725rpm motor through reducer 41.58:1 ratio. Blador VS drive. The dryer features twin chrome-plated drying drums with independent drum gap adjustment, stainless steel frame and safety guards, product feed trough with feed manifold, and doctor blade assembly. Compact unit is designed for drying slurries, purees, pastes, and other pumpable materials into flakes or powders and is well suited for R&D, product development, and small-scale production. Mounted on stainless steel frame. Job No. P1-00972, Serial# 2013-04, built 2013.

MFR: Buflovak

https://images.aaronequipment.com/ItemImages/Air-Conditioners/Air-Conditioners/ISRTU1-I100-15-6T_54428006_aa.jpg
View

Stock No.:

54428006

Unused Inspire Canopy Series 6 Ton Rooftop Air Conditioner ISRTU1-I.100-15-6T – Commercial HVAC Unit (2023)

Unused- Inspire Canopy Series Air Conditioner, Model ISRTU1-I.100-15-6T. Rated 6 nominal tons. Built 2023

https://images.aaronequipment.com/ItemImages/Plastics-Equipment/Extruders-Single-Screw-Extruder/Davis-Standard-Thermatic_54506008_aa.jpg
View

Stock No.:

54506008

Used & Reconditioned Davis-Standard Thermatic 60IN60 6" Single Screw Extruder – 400 HP, 24:1 L/D, Thermatic Clamp

Used & Reconditioned Davis-Standard Thermatic 60IN60 6" Single Screw Extruder 400 HP, 24:1 L/D, Thermatic Clamp. 24:1 L/D ratio, water-cooled barrel, integrated water reservoir, recirculation pump, and heat exchanger. Equipped with a 17.21:1 gearbox rated for 424 HP capacity with a 1.5 service factor, powered by a new 400 HP TECO AC motor (Model EPS4004, 1,800 RPM, 449TX frame) and new TECO AC drive (Model EQ7-4450-C). Includes five barrel heating zones and six die heating zones with new Novus temperature controllers and amp gauges, swing-arm operator station with speed pod, pressure and screw speed gauges, and a 42" centerline height. Fitted with a Thermatic clamp and barrier flight screw; screw and barrel are within serviceable tolerances. Heater bands have been electrically tested, barrel plumbing and heat exchangers have been flow checked, and five new Red Hat solenoid valves have been installed. Approximate overall dimensions are 216" L x 80" W x 90" H. Originally built 2004.

MFR: Davis Standard

https://images.aaronequipment.com/ItemImages/Plastics-Equipment/Extruders-Single-Screw-Extruder/Davis-Standard-60IN60TPIH_54506009_aa.jpg
View

Stock No.:

54506009

Used Davis-Standard 60IN60TPIH 6" Single Screw Extruder – 34:1 L/D, 400 HP, Vented Barrel with ABB Drive

Used Davis-Standard 60IN60TPIH 6" Single Screw Extruder 34:1 L/D, 400 HP, Vented Barrel with ABB Drive. Features a 34:1 L/D ratio with a water-cooled, vented barrel incorporating six cooling zones; vent is located approximately 130" from the center of the feed throat and is currently plugged. Cooling system includes a 1/2 HP recirculation pump, heat exchanger, and 32" x 24" x 12" water reservoir. Driven by a 400 HP WEG AC motor (1,790 RPM) with ABB AC drive and a Davis-Standard Model 60IN60TPIH gearbox featuring a 17.2:1 ratio and rated for 526 HP with a 1.5 service factor. Temperature controls include six-barrel zone Solo 4896 controllers and seven die zone Omron E5EC controllers. Operator controls feature a speed pod with screw RPM, motor load percentage, and pressure transducer gauges. Includes hopper, 42" centerline height, and serial number PT238. Approximate footprint is 25' L x 8' W. Built 1994.

MFR: Davis Standard

https://images.aaronequipment.com/ItemImages/Plastics-Equipment/Extruders-Single-Screw-Extruder/Davis-Standard-600S-Therm_54506010_aa.jpg
View

Stock No.:

54506010

Used & Reconditioned Davis-Standard 600S Thermatic 6" Single Screw Extruder – 300 HP, 30:1 L/D, Reconditioned in 2025

Used & Reconditioned Davis-Standard 600S Thermatic 6" Single Screw Extruder 300 HP, 30:1 L/D, Reconditioned in 2025. Features a 30:1 L/D ratio with a PE/PP screw and a 17.21:1 gearbox ratio. Powered by a new 300 HP Westinghouse AC motor with a new WEG AC inverter drive. Equipped with a refurbished 10-zone control panel consisting of six barrel heating zones and four downstream zones, all fitted with new Eurotherm 3216 temperature controllers. Gearbox has been rebuilt with all internal bearings replaced except the thrust bearing. Serial No. F-9731, S.O. 901180. Electrical requirements are 460 Volt, 3 Phase, 60 Hz. Approximate overall dimensions are 242" L x 74" W x 102" H with an estimated weight of 23,000 lbs. Originally built in 1998, reconditioned in 2025.

MFR: Davis Standard

https://images.aaronequipment.com/ItemImages/Plastics-Equipment/Extruders-Single-Screw-Extruder/PTI-6000_54506011_aa.jpg
View

Stock No.:

54506011

Used PTI 6000 6" Single Screw Extruder – 400 HP, 30:1 L/D, WEG Drive & Flender Gearbox

Used PTI 6000 6" Single Screw Extruder 400 HP, 30:1 L/D, WEG Drive & Flender Gearbox. Features a 30:1 L/D ratio with an air-cooled barrel, seven barrel heating zones, and sixteen downstream heating zones. Driven by a 400 HP WEG AC motor with WEG CFW-11 inverter drive and a Flender Model SZNF 390 gearbox featuring a 21.7:1 ratio and rated for up to 701 HP. Includes a 9" L x 7" W feed throat, 62" centerline height, 900-amp disconnect, and electrical requirements of 460 Volt, 3 Phase, 60 Hz (780 FLA). Mounted on V-groove casters for ease of positioning. Serial No. 3768. Approximate overall dimensions are 24' L x 100" W x 106" H with an estimated weight of 26,000 lbs. Built 2003.

MFR: PTI

https://images.aaronequipment.com/ItemImages/Plastics-Equipment/Extruders-Single-Screw-Extruder/Welex-60-30D_54506012_aa.jpg
View

Stock No.:

54506012

Used Welex 6.0 30D 6" Single Screw Extruder – 500 HP, 30:1 L/D, Vented Barrel with Dynisco Hydraulic Screen Changer

Used Welex 6.0 30D 6" Single Screw Extruder 500 HP, 30:1 L/D, Vented Barrel with Dynisco Hydraulic Screen Changer. Featuring a 30:1 L/D ratio with an air-cooled, vented barrel (vent currently plugged) located approximately 120" from the center of the feed throat. Equipped with six barrel heating zones, nine die heating zones, Tempco Cool Touch heater bands, and a direct-driven Koellmann gearbox with an 8.7:1 ratio. Driven by a 500 HP Reliance AC motor rated for up to 200 screw RPM. Includes a 10" L x 8" W feed throat, 68" centerline height, and a 6" Dynisco hydraulic screen changer complete with hydraulic power unit. Electrical requirements are 460 Volt, 3 Phase, 60 Hz. Previously operated on PET resin. AC drive is not included. Approximate overall dimensions are 330" L x 84" W x 102" H with an estimated weight of 37,000 lbs.

MFR: Welex

https://images.aaronequipment.com/ItemImages/Dryers-Drying-Equipment/Belt-Dryers/Belt-O-Matic-320B_51487002_aa.jpg
View

Stock No.:

51487002

Industrial Used Belt O Matic Belt Dryer Model 320B – High-Efficiency Continuous Drying

Used Belt O Matic Belt Dryer, Model 320B. 6 5" wide by 245" long; 3 phase/480 Volt/40 Amps;LP/natural gas; 5-7 PSI pressure Range; 1,000,000 BTU rating; 10,000 maximum CFM; 7.5 HP fan, maximum drying air temperature 250 degrees F. Built 2017. Last ran wet coffee grounds.

MFR: Belt-O-Matic

https://images.aaronequipment.com/ItemImages/Blowers/Blowers/Chicago-Blower-Size-300_10128113_aa.jpg
View

Stock No.:

10128113

Used Chicago Blower Size 300 Centrifugal Fan | 60 HP Industrial Blower System

Used Chicago Blower Size 300 Centrifugal Fan | 60 HP Industrial Blower System. Size 300. Rated up to 18,000 cfm @ 15.3 SP. Serial number 308227. Inlet 30" diameter with cone to 42" diameter. Outlet 32" x 23.5"" with damper. Overall size " wide x " tall x " long. Motor 60 HP. Electrical power 230/460 vac 3 phase. OAL dimensions 84" wide x 80" long x 71" tall.

MFR: Chicago Blower

https://images.aaronequipment.com/ItemImages/Screeners-Sifters/Circular-Screeners/Sweco-LX60C168_10755166_aa.jpg
View

Stock No.:

10755166

Used Sweco LX60C168 60” Low Profile Screener – Single Deck, 3D Motion, Spare Motor & Springs, Built 2024

Used- Sweco Model LX60C168 60" Single Deck Low Profile Screener. The Sweco LX Low Profile Flow-Thru Separator allows for high capacity wet or dry scalping in a compact, low headroom design. Dual .69 hp motors mounted on opposite sides of the LX allow unrestricted flow of material and create the 3-D motion that allows oversize material full discharge, keeping the screen clear for maximum product flow. Low headroom requirements (as little as 15 inches) and straight flow design, allow the LX to fit easily into existing product lines without reworking the entire system. 12" center bottom outlet. Includes used spare motor, and six (6) spare springs. Unit is mounted on a 27" high base. No lid. " screen installed. 230-460/3/60-volt input. Serial# 554445-A-09/24, built 2024.

MFR: Sweco

https://images.aaronequipment.com/ItemImages/Plastics-Equipment/Size-Reduction-Dual-Rotor-or-Single-Rotor-Shredders/Vecoplan_10755173_aa.jpg
View

Stock No.:

10755173

Used Vecoplan RG42/60XL Shredding System – 60 HP, Double-Row Cutter Rotor, Infeed/Discharge Conveyors, OEM Controls

Used- Vecoplan Model RG42/60XL Shredding Package.15" diameter rotor with double row of 48 total cutters. Single counter knife. Powered by a 60 HP 460-volt motor through a Flender gearbox. 51" x 42" chamber opening with 1.7 KW (2.2 HP) hydraulic ram. Gravity discharge. Mounted on a 24" tall riser base. Hopper has a 89" x 80 feed opening with forklift unload rails, and has an in-feed height of 120". 3/8" holes screens installed. Machine base is 108" x 85". With original OEM PanelView Plus 1000 control panel. Includes one shredder in-feed conveyor that is 12" wide x 21' long. 2" cleats on 24" centers. Powered by a 2 HP motor thru 30:1 gearbox. Also includes 12" wide x 12' long discharge conveyor with 2" cleats on 24" centers. Powered by a 1 HP motor thru 30:1 gearbox. 460/3/60 operation. 81.2 FLA.Built 2008, Serial# 11357010.

MFR: Vecoplan

https://images.aaronequipment.com/ItemImages/Screeners-Sifters/Circular-Screeners/Sweco-LS60C_47852016_aa.jpg
View

Stock No.:

47852016

Used Sweco 60" Vibro Energy Separator – Model LS60C, Stainless Steel, Single Deck

Used- Sweco 60" Vibro Energy Separator, Model LS60C, Stainless Steel. Single Deck. Driven by a 2.5hp, 3/60/460 volt motor. Includes top cover. Serial# LS60-481-54. Incomplete.

MFR: Sweco

Recently reduced items

https://images.aaronequipment.com/ItemImages/Mixers/Paddle-Mixer/Paul-O-Abbe_52919007_aa.jpeg
Submit Offer $5,190 View

Stock No.:

52919007

Used Paul O Abbe Stainless Steel Fluidizer – 0.7 Cu Ft for Sale

Used- Paul O Abbe Fluidizer, Stainless Steel. Approximate 0.7 cubic feet, 20 liter. Non jacketed trough, 16" wide x 18-1/2" long x 18-1/2" deep. (2) 1-1/2" diameter x 15" long shafts, each have (14) 3" long x 3" wide x 1/8" thick paddles on 1/2" diameter posts. Driven by (2) .33hp, 3/60/230/460 volt, 1700rpm motors, through a reducer 8:1. Bottom bombay doors. 9-1/2" Diameter bottom discharge, 20" discharge height. Includes mounted control panel. Mounted on (4) casters. Serial# A45254.

MFR: Paul O Abbe

https://images.aaronequipment.com/ItemImages/Mills/Hammer-Mill/Quadro-196_50647001_aa.jpg
View

Stock No.:

50647001

Used - Quadro Comil Model 196, 304/316 Stainless Steel, 8,000 Lbs/Hr Capacity, 10 HP

Used- Quadro Comil, Model 196, 304 Stainless Steel. Approximate capacity up to 8,000 pounds an hour. 8" diameter top feed, 12" diameter bottom discharge. 12' dia x 12' dia housing. Requires (missing) impeller and impeller hardware. Housing 304 stainless steel, shaft and discharge chute 316 stainless steel. Driven by a 10 hp, 3/60/208-230/460 Volt, 1750 rpm motor. Serial# 0387.

MFR: Quadro

https://images.aaronequipment.com/ItemImages/Dryers-Drying-Equipment/Rotary-Hot-Air/Summerlot_52919005_aa.jpeg
View

Stock No.:

52919005

Used Summerlot Engineered Products Dryer – 316 Stainless Steel

Used- Summerlot Engineered Products Dryer, 316 Stainless Steel. Cantilevered S/C. 12" long x 6" wide feed hopper, with a 3-3/4" diameter x 48" long screw, 3/4" pitch. Driven by a 1hp, 3/60/208-230/460 volt, 1755 rpm motor. Approximately 10" diameter x 136" long dryer vessel, with (4) fixed baffles. Driven by a 2hp, 3/60/230/460 volt, 1140 rpm motor through reducer, 5.76:1. Approximate 8" diameter discharge with a Flowseal valve. 36" Discharge height. Serial# 88211.

MFR: Summerlot

https://images.aaronequipment.com/ItemImages/Tanks/Stainless-1000-4999-Gal/54567010_aa.jpeg
View

Stock No.:

54567010

Used Paul Mueller 1,500 Gallon 304 Stainless Steel Tank

Used Paul Mueller Company stainless steel pressure vessel, Type 304 stainless steel construction, 76" diameter x Height 170" to top mixer. 145" to top hatch, Top hatch 24" diameter x Legs 56" x 56". Serial# 106184-1, built 1992. Vessel manufactured to DIN Part RT4 pressure vessel standards. Unit designed for heat transfer service with heating surface (exact area not legible). Tank is rated Atmospheric.

Explore our guides.

Enhance your equipment knowledge with our resources.

August 20, 2026

Guide to Equipment Photography for Faster Sales

Learn equipment photography tips that can help sell used machinery faster, including 360° photos, clean backgrounds, spec tags, lighting, and image quality.

Blog Used Equipment

April 7, 2026

Everything You Should Know Before Buying Used Cannabis Equipment

The cannabis industry has been booming, and with this growth comes the need for efficient and cost-effective manufacturing solutions.

Cannabis Industry Blog

April 7, 2026

Everything You Should Know Before Buying A Used Stainless Steel Tank

What do you need to know before buying a stainless-steel tank?

Tanks Blog

Sell Equipment

Have surplus equipment? We offer flexible options including direct purchase, consignment, or listing on our marketplace — all backed by trusted professionals.

Learn about selling

Buy Used Equipment

Discover one of the world’s largest inventories of used processing and packaging equipment — ready to ship and backed by decades of industry expertise.

Browse all equipment

Auctions

Join global buyers and sellers at AIS-hosted auctions featuring top-quality surplus equipment from leading facilities around the world.

View current auctions