CALL 630-350-2200
View All Equipment Auctions OEM & New Equipment
Appraisals Equipment Reconditioning Asset Management Plant Liquidation Financing Centrifuge Parts & Services
Company Overview Meet Our Team Locations & Contact

Explore our extensive equipment marketplace

Discover a wide range of used processing and packaging machinery tailored to meet your industry needs. Use our advanced search features to find the perfect equipment quickly and efficiently.

Recently added products

Clear
https://images.aaronequipment.com/ItemImages/Compressors/Air-Rotary/Atlas-Copco-ZE4-B_52718001_aa.jpeg
View

Stock No.:

52718001

Used Atlas Copco Air Compressor & Dryer System – ZE4-B & FD 1250 VSD

Used 2013 Atlas Copco oil-free rotary screw compressor and VSD dryer package with approximately 5,000 total operating hours, complete with filtration and modern controls. Consists of an Atlas Copco Model ZE4-B Low Pressure Oil-Free Rotary Screw Compressor rated at ~876 CFM, driven by a 125hp 3/60/440-460v 3560rpm air-cooled motor, 33 psig max working pressure, with Elektronikon GraphicPlus HMI and Siemens Sinamics drive (S/N APF185963); an Atlas Copco FD 1250 VSD Refrigerated Air Dryer rated at 2,646.25 CFM, 11.8kW, R404a refrigerant with Elektronikon HMI controls (S/N APF185022); and (2) Atlas Copco DD 1400FF inline air filters with housings (S/N APF185422/423). Oil-free screw technology with refrigerated drying and inline filtration makes this package well-suited to clean-air applications in pharma, food and beverage, electronics, and any process where oil carryover is unacceptable. Turnkey, ready-to-integrate compressed-air solution rather than a bare machine. System reported in excellent working condition; documentation available, photos and inspection recommended.

MFR: Atlas Copco

https://images.aaronequipment.com/ItemImages/Kettles/Stainless-Steel-0-499-Gallon/Groen-N-125-SP_52932007_aa.jpg
Submit Offer $4,750 View

Stock No.:

52932007

Used Groen N-125 SP Agitated Kettle – 125 Gallon, High-Shear, 316 SS

Used- Groen Agitated Kettle, Model N-125 SP, Approximately 125 Gallon Capacity, 316 Stainless Steel, Vertical. Approximate 38" diameter x 34" deep. Open top, hemispherical bottom. 304 Stainless steel Jacket rated 125 psi at 353 degrees F. Top entering high shear homogenizing agitator, driven by a 3hp, 3/60/230/460 volt, 3450 rpm motor. 1-1/2" Center bottom outlet with valve, 19" discharge height. Mounted on 3 legs with casters. National Board# 68679, Serial# 1974.

MFR: Groen

https://images.aaronequipment.com/ItemImages/Tanks/Stainless-1000-4999-Gal/54293003_aa.jpg
Submit Offer $5,000 View

Stock No.:

54293003

Used 1,250 Gallon 304 Stainless Steel Vertical Mix Tank – Dual Turbine Agitator,

Used 1,250 Gallon 304 Stainless Steel Vertical Mix Tank. Approximate 98" diameter x 42" straight side. Flat top, slight dish bottom. Top agitator bridge with a Chemineer 2-tier 3-turbine agitator. Driven by a 1hp, 3/60/230/460 volt, 1160rpm gear motor. Openings Top: (2) 12" manways, 1-1/2". Approximately 3" center bottom outlet. (4) internal mounted baffles. Mounted on (4) Stainless Steel Legs. No Manufacturers Tag.

https://images.aaronequipment.com/ItemImages/Tanks/Stainless-1000-4999-Gal/54293004_aa.jpg
Submit Offer $5,000 View

Stock No.:

54293004

1,250 Gallon 304 Stainless Steel Agitated Mix Tank – Dual Turbine, Baffled, Vert

Used Agitated Stainless Steel 1,250 Gallon Mix Tank, Vertical. Approximately 98" diameter x 42" straight side. Flat top, slight dish bottom. Top agitator bridge with a Chemineer 2-tier 3-turbine agitator. Driven by a 1hp, 3/60/230/460 volt, 1160rpm gear motor. Openings Top: (2) 12" manways, 1-1/2". Approximately 3" center bottom outlet. (4) internal mounted baffles. Mounted on (4) Stainless Steel Legs. No Manufacturers Tag.

https://images.aaronequipment.com/ItemImages/Tanks/Stainless-1000-4999-Gal/Unknown_54293005_aa.jpg
Submit Offer $5,000 View

Stock No.:

54293005

304 Stainless Steel 1,250 Gallon Batch Tank with Dual Turbine Agitator & Interna

Used 304 Stainless Steel 1,250 Gallon Chemineer Agitated Tank, Vertical. Approximately 98" diameter x 42" straight side. Flat top, slight dish bottom. Top agitator bridge with Chemineer dual 3 turbine agitator. Driven by a 1.5hp, 3/60/230/460 volt, 1175rpm gear motor. Openings Top: (2) 12" manways. Approximately 3" center bottom outlet. (4) internal mounted baffles. Mounted on (4) Stainless Steel Legs. No Manufacturers Tag.

MFR: Unknown

https://images.aaronequipment.com/ItemImages/Reactors/Stainless-Steel-5000-Gallon-and-up/14191142_aa.jpg
View

Stock No.:

14191142

Unused 12,500-Gallon 316L Stainless Steel Reactor by Over

Unused Stainless Steel Reactor, 12500 Gallon. Manufactured by Over. 316L stainless steel construction. Internal MAWP 87 psi @ 400F. Halfpipe jacket MAWP 174 psi @ 400F. 2" Internal Coil rated MAWP 174PSI/FV @ 400F. Sanitary polished internal and exterior top shell. Dome top and bottom with 2" Center bottom outlet. Top flange and (4) internal baffles with vortex breaker. Does not include motor and agitator. 20" top manway. (4) Lug mounted. 243"OAH x 133"ID. National Board and PED (Double certification). Built 2024. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

https://images.aaronequipment.com/ItemImages/Reactors/Stainless-Steel-5000-Gallon-and-up/14191143_aa.jpg
View

Stock No.:

14191143

Sanitary 316L Stainless Steel Reactor – 12,500-Gallon Capacity with Jacket and Coil

Unused 316L Stainless Steel 12500 Gallon Reactor. Manufactured by Over srl. Internal MAWP 87 psi @ 400F. Halfpipe jacket MAWP 174 psi @ 400F. 2" Internal Coil rated MAP 174PSI/FV @ 400F. Sanitary polished internal and exterior top shell. Dome top and bottom with 2" Center bottom outlet. Top flange and (4) internal baffles with vortex breaker. Does not include motor and agitator. 20" top manway. (4) Lug mounted. 243"OAH x 133"ID. National Board and PED (Double certification). Built 2025. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

https://images.aaronequipment.com/ItemImages/Tanks/Cryogenic-or-Gases/Tomco-C_49747006_aa.jpg
View

Stock No.:

49747006

Used – 50 Ton Tomco C CO2 Tank – Vertical High-Pressure Carbon Dioxide Storage

Used 50 Ton Tomco C CO2 Tank Vertical High-Pressure Carbon Dioxide Storage. SA-612 Shell & Head. 78" diameter x 576" straight side. MAWP: 350PSI at 200 degrees F. 12" x 16" manway. Product: Carbon Dioxide. National Board# 1591, Serial# 1591, built 1986.

MFR: Tomco

https://images.aaronequipment.com/ItemImages/Tanks/Stainless-5000-Gal-and-up/Wolfe-Mech_53267065_aa.jpg
View

Stock No.:

53267065

Wolfe Mechanical Mix Tank. Approx.12,600 gallon

Used- Wolfe Mechanical Mix Tank. Approx.12,600 gallons, 304L stainless steel vertical 12' diameter X 15' high straight side. Internal rated 0.36/-0.22 PSI @ 250 degrees F. Max S.P. 1.3. Flat top with 6" channel supports and flat bottom. Top fittings: (1) 10" center agitator nozzle, (1) 2", (2) 3", and (1) 6". (1) 2" and (1) 4" side top inlets. 24" side bottom manway, (3) 3" side bottom outlets. (1) 2" low point drain. Has (3) internal baffles. Equipped with ProQuip top entering agitator model 3ZEX25BP driven by a 3 HP,3/60/230/460v 1800 RPM Motor. Heavy duty agitator drive with dry well and oversized bearings, 3" and 2" diameter x 174" long two piece shaft 304 SS, two 39" diameter 3-blade HiFlow turbines rotating at 72 RPM with lower impeller 18" off tank bottom and upper impeller 80" above lower. Each turbine pumps 18,518 GPM providing an entrained flow of 37,040 GPM. Gear reducer service factor of 1.6 based on full motor horsepower and L-10 bearing life in excess of 100,000 hours. Shaft sealed by means of low pressure Viton vapor seal with two piece split 304 SS seal plate.. Weight 7900#, Built 2010.

MFR: Wolfe Mech

https://images.aaronequipment.com/ItemImages/Tanks/Stainless-5000-Gal-and-up/Crown-Iron-Works_10749166_aa.jpg
View

Stock No.:

10749166

Unused Crown Iron Works 12,700 Gallon 316L Stainless Steel Vertical Process Vessel – ASME 15 PSI/Full Vacuum

Unused Crown Iron Works 12,700 Gallon 316L Stainless Steel Vertical Process Vessel ASME 15 PSI/Full Vacuum. 12' diameter x 11'8" straight side. 19'2" overall height. Rated 15FV psi @ 250?F. Lug/Leg Supports. Dished Heads. 1/4" Thick Shell Wall. 20" top manway, bottom 4" center bottom outlet.

MFR: Crown Iron Works

https://images.aaronequipment.com/ItemImages/Tanks/Stainless-5000-Gal-and-up/Crown-Iron-Works_10749167_aa.jpg
View

Stock No.:

10749167

Unused 12,700 Gallon Crown Iron Works 316L Stainless Steel Vertical Storage & Process Vessel

Unused 12,700 Gallon Crown Iron Works 316L Stainless Steel Vertical Storage & Process Vessel.12' diameter x 11'8" straight side. 19'2" Overall Height. Rated 15FV psi @ 250?F. Lug/Leg Supports. Dished Heads. 1/4" Thick Shell Wall. 20" top manway, bottom 4" center bottom outlet.

MFR: Crown Iron Works

https://images.aaronequipment.com/ItemImages/Kettles/Stainless-Steel-0-499-Gallon/J-C-Pardo-and-Sons-50-Liter_11059396_aa.jpg
View

Stock No.:

11059396

13 Gallon (50 Liter) Agi-Mixer Triple Motion Greerco Jacketed Vacuum Kettle

13 Gallon (50 Liter) Agi-Mixer Triple Motion Greerco Jacketed Vacuum Kettle. 316 Stainless Steel. Has counter rotating sweep mixer with scrapers and high shear mixer. Internal rated Full Vacuum. Jacket rated 40 PSI @ 300 Deg.F..Top Drive motor Disconnected for removal. Test results: The previous owner reports that all components of the homogenizer are fully functional. Fully tested with H2O. The homogenizer and inner and outer paddles work as do their RPM meters. The cover lifting hydraulics is fully functional. The cover lift mechanism is functional as well as the homogenizer and the two blades. The jacket was pressure tested and vessel was vacuum tested - no leaks. The chart recorder is out of service as well as the hour meter. The light bulb that gave me trouble in the video was replaced.Note: The outer paddles must be jogged to index, (amber light), before the cover will open. The limit switch with long arm to contact tank, must be in the correct position for lifting and for paddle operation. Last used in sanitary cosmetics facility. Video of unit running available.

MFR: J C Pardo & Sons

Recently reduced items

https://images.aaronequipment.com/ItemImages/Mixers/Paddle-Mixer/Paul-O-Abbe_52919007_aa.jpeg
Submit Offer $5,190 View

Stock No.:

52919007

Used Paul O Abbe Stainless Steel Fluidizer – 0.7 Cu Ft for Sale

Used- Paul O Abbe Fluidizer, Stainless Steel. Approximate 0.7 cubic feet, 20 liter. Non jacketed trough, 16" wide x 18-1/2" long x 18-1/2" deep. (2) 1-1/2" diameter x 15" long shafts, each have (14) 3" long x 3" wide x 1/8" thick paddles on 1/2" diameter posts. Driven by (2) .33hp, 3/60/230/460 volt, 1700rpm motors, through a reducer 8:1. Bottom bombay doors. 9-1/2" Diameter bottom discharge, 20" discharge height. Includes mounted control panel. Mounted on (4) casters. Serial# A45254.

MFR: Paul O Abbe

https://images.aaronequipment.com/ItemImages/Dryers-Drying-Equipment/Rotary-Hot-Air/Summerlot_52919005_aa.jpg
View

Stock No.:

52919005

Used Summerlot Engineered Products Dryer – 316 Stainless Steel

Used- Summerlot Engineered Products Dryer, 316 Stainless Steel. Cantilevered S/C. 12" long x 6" wide feed hopper, with a 3-3/4" diameter x 48" long screw, 3/4" pitch. Driven by a 1hp, 3/60/208-230/460 volt, 1755 rpm motor. Approximately 10" diameter x 136" long dryer vessel, with (4) fixed baffles. Driven by a 2hp, 3/60/230/460 volt, 1140 rpm motor through reducer, 5.76:1. Approximate 8" diameter discharge with a Flowseal valve. 36" Discharge height. Serial# 88211.

MFR: Summerlot

https://images.aaronequipment.com/ItemImages/Dryers-Drying-Equipment/Oven/PB-1542_50028005_aa.jpg
View

Stock No.:

50028005

Unused JBT Foodtech FORMCOOK Progrill Contact Cooker – Model PB-1542 Electric ProBake

Unused- JBT Foodtech FORMCOOK Progrill Contact Cooker. Model PB-1542 Electric ProBake. With 10 Degree Incline and Top Belt. Overall Belt Width 60". Usable Belt Width 59", Cooking Length 13.78'. Seven Lower Electric Platens, Upper and Lower Teflon Style Belting. Electrical Specifications 460/3/60 (110/1/60), Electric Drive, Basic Belt Cleaning System, Digital Read-out System, 12" Out-feed Conveyor, Standard Exhaust Fan. Controllogix Processor disconnects on all motors. HMI Screen A. Platens 3/60/460 / 1/60/110 Electric Drive.

https://images.aaronequipment.com/ItemImages/Pumps/Stainless-Centrifugal/APV-Crepaco-W20-20_53011006_aa.jpeg
Submit Offer $2,375 View

Stock No.:

53011006

High-Efficiency APV Crepaco W20/20 Pump – 105 GPM, 3500 RPM

High-Efficiency APV Crepaco W20/20 Pump 105 GPM, 3500 RPM. Approximate 105 gallons per minute, 95 head feet @ 3500 rpm. Approximate 2" inlet, 2" outlet. Driven by a 5hp, 3/60/230/460 volt, 3500 rpm motor. Serial# H-9296-95.

MFR: APV/Crepaco

Explore our guides.

Enhance your equipment knowledge with our resources.

August 20, 2026

Guide to Equipment Photography for Faster Sales

Learn equipment photography tips that can help sell used machinery faster, including 360° photos, clean backgrounds, spec tags, lighting, and image quality.

Blog Used Equipment

April 7, 2026

Everything You Should Know Before Buying Used Cannabis Equipment

The cannabis industry has been booming, and with this growth comes the need for efficient and cost-effective manufacturing solutions.

Cannabis Industry Blog

April 7, 2026

Everything You Should Know Before Buying A Used Stainless Steel Tank

What do you need to know before buying a stainless-steel tank?

Tanks Blog

Sell Equipment

Have surplus equipment? We offer flexible options including direct purchase, consignment, or listing on our marketplace — all backed by trusted professionals.

Learn about selling

Buy Used Equipment

Discover one of the world’s largest inventories of used processing and packaging equipment — ready to ship and backed by decades of industry expertise.

Browse all equipment

Auctions

Join global buyers and sellers at AIS-hosted auctions featuring top-quality surplus equipment from leading facilities around the world.

View current auctions