CALL 630-350-2200
View All Equipment Auctions OEM & New Equipment
Appraisals Equipment Reconditioning Asset Management Plant Liquidation Financing Centrifuge Parts & Services
Company Overview Meet Our Team Locations & Contact

Explore our extensive equipment marketplace

Discover a wide range of used processing and packaging machinery tailored to meet your industry needs. Use our advanced search features to find the perfect equipment quickly and efficiently.

Recently added products

Clear
https://images.aaronequipment.com/ItemImages/Boilers/Fire-Tube/Fulton-VSRT-125_54478001_aa.jpeg
View

Stock No.:

54478001

Unused Fulton VSRT-125 Steam Boiler | 125 HP Vertical Tubeless High Efficiency Boiler

Installed, tested, and not used afterward ******* Used Fulton VSRT-125 Vertical Tubeless Steam Boiler rated at 125 boiler horsepower with a steam output of approximately 4,300 lb./HR and a fuel input of about 5.0 MMBTU/hr. 193.2 sq/ft heating surface. It utilizes a two-pass vertical design with a spiral rib heat exchanger and a fully water-backed pressure vessel with no refractory. Typical thermal efficiency is in the 8286% range with steam quality =99.75%. The unit is equipped with a fully modulating, linkage less burner capable of up to a 10:1 turndown ratio and is configured for natural gas, propane, or dual fuel, with NOx emissions typically below 20 ppm depending on setup. Maximum operating pressure is typically rated up to 150 PSIG (design pressure may vary by unit). Approximate dimensions are 100" deep, 75" wide, and 140" high, with an operating weight approximately 19,000 lbs. Serial# F10116417A, National Board# 11514, built 2024.

MFR: Fulton

https://images.aaronequipment.com/ItemImages/Packaging-Equipment/Shrink-Equipment-Horizontal-Lap-Sealers/FRS-590_73105001_aa.jpg
View

Stock No.:

73105001

Used Furis FRS-590 Automatic Bath Bomb Packaging Line – 150 PPM – PVC, POF, PE Films

Used- Furis Machinery Automatic Bath Bomb Packaging Line, Model FRS-590. Consisting of Automatic feeder; Packing machine; and Shrink tunnel. Set up for 40-75mm bath bombs. Rated at speeds of 30-150 pieces/min. 450mm maximum film width. PVC, POF, & PE film types. Previously used for bath bombs.

https://images.aaronequipment.com/ItemImages/Furnaces/Furnaces/48E-4Z_54252001_aa.jpg
View

Stock No.:

54252001

Used Gasbarre 48E-4Z Continuous Belt Furnace | 48" Belt | 4 Heat Zones | 1900°F | 300 kW | 2016

Used Gasbarre 48E-4Z Continuous Belt Furnace | 48" Belt | 4 Heat Zones | 1900F | 300 kW | 2016. 48" belt width. 370" cooling length. (4) heat zones. (1) heat chamber. 1900 degrees F max. operating temperature. Electric heat source. 300kW (approx. 402 HP), 3/60/480V. Built 2016. Previously used for silver.

https://images.aaronequipment.com/ItemImages/Centrifuges/Disc-Automatic/Gea-Niro-GEA-HSD-01-06_53979001_aa.jpg
View

Stock No.:

53979001

Unused GEA HSD-01-06 Disc Stack Centrifuge

Unused: GEA HSD-01-06 Nozzle Disc Centrifuge, Stainless steel (product contact areas), max bowl speed 10,000 rpm (9500 x G force), four discharge nozzles, 1.0 L solids chamber capacity, temperature rating: 5-100C (41-212F), belt drive, drive motor, control.

MFR: Gea-Niro

https://images.aaronequipment.com/ItemImages/Packaging-Equipment/Form-and-Fill-Horizontal-Roll-Stock-Thermoformers/540_72759001_aa.jpg
View

Stock No.:

72759001

Used GEA Powerpak 540 Thermoforming Packaging Machine – Rigid/Tyvek, Medical Grade

Used- GEA Powerpak 540 Thermoforming Packaging Machine; Web width of machine - 540mm; Packaging material - Forming: Rigid, PETG up to .040"; Non forming - Tyvek; Dieset configuration - 4- up, (2tracks x 2row) 3- up, (3tracks x 1row); 10 to 12 cycles per minute; 208 Volts, 3 Phase, 60 Cycle; Compressed Air -100 PSI;Water - 45 Liters per Hour/12 Gallons per Hour; Forming Web Width - 540mm +2 / -0; Non- Forming Web Width - 530mm + 2 -1mm; Film Cores- 3" and 6"; Forming Film Roll Size - 500mm Max OD; Non Forming Roll Size - 500mm Max OD; Vacuum Pumps - Busch 1144 BV forming vacuum pump; Mfg. 2016; Last used on Medical Products.

https://images.aaronequipment.com/ItemImages/Granulators-Pharmaceutical/High-Shear/GEA-Process-Engineering-PMA-600-Advanced_40425075_aa.jpg
View

Stock No.:

40425075

Unused GEA PMA 600 Advanced High Shear Mixer | 600 Liter Pharmaceutical Granulation System

Unused GEA 600 Liter High Shear Mixer, Model PMA 600 Advanced. 240-450 liter working capacity. 316L stainless steel product contact surfaces, 36 kw main impeller, 1-170 rpm, 11 kw chopper, 1000-3000 rpm, jacketed bowl, machine designed to 16 bar shock rating, full vacuum rated bowl, 8" side discharge with valve. Serial # 14369.1310, Built 2015. .Integrally mounted Quadro Comil, Model U20, integrally mounted blade hoist, associated control systems with Allen Bradley plc and HMI designed for class 1 div 2 area, 480 volt. GEA temperature control unit, Model PMS 600, WIP design, through the wall design mounted on base. PL600 IBC hoist with (4) approximately 750 liter IBC's.

MFR: GEA Process Engineering

https://images.aaronequipment.com/ItemImages/Centrifuges/Disc-Automatic/GEA-Westfalia-MSA-90-01-076_41174062_aa.png
View

Stock No.:

41174062

Used GEA Westfalia Desludger Disc Centrifuge – Model MSA-90-01-076

Used GEA Westfalia Desludger Disc Centrifuge Model MSA-90-01-076, stainless steel construction (product contact areas), max bowl speed 5920 rpm, light and heavy phase centripetal pump liquid discharge, 18.5 kW drive motor (220-380/3/50), control panel. Previously used in a dairy cream application. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible

MFR: GEA Westfalia

https://images.aaronequipment.com/ItemImages/Centrifuges/Disc-Automatic/GEA-Westfalia-SA7-06-076_51948001_aa.jpg
View

Stock No.:

51948001

GEA Westfalia SA7-06-076 Desludger Disc Centrifuge. Used.

Used-GEA Westfalia SA7-06-076 Desludger Disc Centrifuge, 316 stainless steel construction (product contact areas), maximum bowl speed 8400 rpm, clarifier design (liquid/solids separation), centripetal pump liquid discharge, direct drive, by an approximate 6.6 hp drive motor, control panel. Frame mounted. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible

MFR: GEA Westfalia

https://images.aaronequipment.com/ItemImages/Centrifuges/Disc-Automatic/GEA-Westfalia-OSD-2-02-137_53007001_aa.jpeg
View

Stock No.:

53007001

GEA Westfalia Separator, used.

Used- GEA Westfalia Separator; Model OSD 2-02-137; 10,000 RPM; 1 Liter Volume; .5 Liter Solids holding. 0.8 kW(1.07hp) 3/50/60 Hz motor. Maximum Separating temperature 212 degrees F; 25" Long x 25" Wide x 33" High; Approximately 154 lbs. Last used for R&D purposes. Serial# 9077-113

MFR: GEA Westfalia

https://images.aaronequipment.com/ItemImages/Centrifuges/Disc-Automatic/GEA-Westfalia-MSD-60-01-076_53462008_aa.jpg
View

Stock No.:

53462008

Used – GEA Westfalia MSD-60-01-076 Desludger Disc Centrifuge – Stainless Steel, Dairy Application

Used GEA Westfalia MSD-60-01-076 Desludger Disc Centrifuge Stainless Steel, Dairy Application, max bowl speed 6540 rpm, separator design, 11 kW (14.75hp) drive motor (220-380/3/50). Previously used in a dairy cream application. Previously used in a dairy/cheese application. Overall dimensions: 1250 mm (4) x 950 mm (29") x 1500 mm (49") high. Weight 765 kgs (1683 LBS).

MFR: GEA Westfalia

https://images.aaronequipment.com/ItemImages/Centrifuges/Disc-Automatic/GEA-Westfalia-MSA40-06-076_53607001_aa.jpg
View

Stock No.:

53607001

Used GEA Westfalia MSA-40-06-076 Desludger Disc Centrifuge

Used- GEA Westfalia MSA-40-06-076 Desludger Disc Centrifuge. Stainless steel construction (product contact areas, max bowl speed 4800 rpm, clarifier design (liquid/solids separation), centripetal pump liquid discharge, 25 hp drive motor 230/460/3/60. Last used to clarify apple juice. .

MFR: GEA Westfalia

https://images.aaronequipment.com/ItemImages/Centrifuges/Disc-Automatic/GEA-Westfalia-FSE300_54061001_aa.jpg
View

Stock No.:

54061001

Unused GEA Westfalia FSE300 Disc-Stack Centrifuge | 9,000 L/hr | XP-Rated | 2024 Build | CIP & Skid-Mounted

Unused GEA Westfalia Disc-Stack Centrifuge, Model FSE300. 316 stainless steel contact surfaces; 9,000 L/hr hydraulic capacity; 4500-4800 RPM bowl speed; 24 liter solid space; Semi-continuous solids ejection by piston; Low shear inlet (hydro hermetically sealed); Self-cleaning bowl for fully-automatic CIP. Rated for operation in XP areas; Skid-mounted; With control panel; 55 kW (73.75 HP) motor. Built 2024.

MFR: GEA Westfalia

Recently reduced items

https://images.aaronequipment.com/ItemImages/Mixers/Paddle-Mixer/Paul-O-Abbe_52919007_aa.jpeg
Submit Offer $5,190 View

Stock No.:

52919007

Used Paul O Abbe Stainless Steel Fluidizer – 0.7 Cu Ft for Sale

Used- Paul O Abbe Fluidizer, Stainless Steel. Approximate 0.7 cubic feet, 20 liter. Non jacketed trough, 16" wide x 18-1/2" long x 18-1/2" deep. (2) 1-1/2" diameter x 15" long shafts, each have (14) 3" long x 3" wide x 1/8" thick paddles on 1/2" diameter posts. Driven by (2) .33hp, 3/60/230/460 volt, 1700rpm motors, through a reducer 8:1. Bottom bombay doors. 9-1/2" Diameter bottom discharge, 20" discharge height. Includes mounted control panel. Mounted on (4) casters. Serial# A45254.

MFR: Paul O Abbe

https://images.aaronequipment.com/ItemImages/Dryers-Drying-Equipment/Rotary-Hot-Air/Summerlot_52919005_aa.jpg
View

Stock No.:

52919005

Used Summerlot Engineered Products Dryer – 316 Stainless Steel

Used- Summerlot Engineered Products Dryer, 316 Stainless Steel. Cantilevered S/C. 12" long x 6" wide feed hopper, with a 3-3/4" diameter x 48" long screw, 3/4" pitch. Driven by a 1hp, 3/60/208-230/460 volt, 1755 rpm motor. Approximately 10" diameter x 136" long dryer vessel, with (4) fixed baffles. Driven by a 2hp, 3/60/230/460 volt, 1140 rpm motor through reducer, 5.76:1. Approximate 8" diameter discharge with a Flowseal valve. 36" Discharge height. Serial# 88211.

MFR: Summerlot

https://images.aaronequipment.com/ItemImages/Dryers-Drying-Equipment/Oven/PB-1542_50028005_aa.jpg
View

Stock No.:

50028005

Unused JBT Foodtech FORMCOOK Progrill Contact Cooker – Model PB-1542 Electric ProBake

Unused- JBT Foodtech FORMCOOK Progrill Contact Cooker. Model PB-1542 Electric ProBake. With 10 Degree Incline and Top Belt. Overall Belt Width 60". Usable Belt Width 59", Cooking Length 13.78'. Seven Lower Electric Platens, Upper and Lower Teflon Style Belting. Electrical Specifications 460/3/60 (110/1/60), Electric Drive, Basic Belt Cleaning System, Digital Read-out System, 12" Out-feed Conveyor, Standard Exhaust Fan. Controllogix Processor disconnects on all motors. HMI Screen A. Platens 3/60/460 / 1/60/110 Electric Drive.

https://images.aaronequipment.com/ItemImages/Pumps/Stainless-Centrifugal/APV-Crepaco-W20-20_53011006_aa.jpeg
Submit Offer $2,375 View

Stock No.:

53011006

High-Efficiency APV Crepaco W20/20 Pump – 105 GPM, 3500 RPM

High-Efficiency APV Crepaco W20/20 Pump 105 GPM, 3500 RPM. Approximate 105 gallons per minute, 95 head feet @ 3500 rpm. Approximate 2" inlet, 2" outlet. Driven by a 5hp, 3/60/230/460 volt, 3500 rpm motor. Serial# H-9296-95.

MFR: APV/Crepaco

Explore our guides.

Enhance your equipment knowledge with our resources.

August 20, 2026

Guide to Equipment Photography for Faster Sales

Learn equipment photography tips that can help sell used machinery faster, including 360° photos, clean backgrounds, spec tags, lighting, and image quality.

Blog Used Equipment

April 7, 2026

Everything You Should Know Before Buying Used Cannabis Equipment

The cannabis industry has been booming, and with this growth comes the need for efficient and cost-effective manufacturing solutions.

Cannabis Industry Blog

April 7, 2026

Everything You Should Know Before Buying A Used Stainless Steel Tank

What do you need to know before buying a stainless-steel tank?

Tanks Blog

Sell Equipment

Have surplus equipment? We offer flexible options including direct purchase, consignment, or listing on our marketplace — all backed by trusted professionals.

Learn about selling

Buy Used Equipment

Discover one of the world’s largest inventories of used processing and packaging equipment — ready to ship and backed by decades of industry expertise.

Browse all equipment

Auctions

Join global buyers and sellers at AIS-hosted auctions featuring top-quality surplus equipment from leading facilities around the world.

View current auctions