CALL 630-350-2200
View All Equipment Auctions OEM & New Equipment
Appraisals Equipment Reconditioning Asset Management Plant Liquidation Financing Centrifuge Parts & Services
Company Overview Meet Our Team Locations & Contact

Explore our extensive equipment marketplace

Discover a wide range of used processing and packaging machinery tailored to meet your industry needs. Use our advanced search features to find the perfect equipment quickly and efficiently.

Recently added products

Clear
https://images.aaronequipment.com/ItemImages/Plastics-Equipment/Extruders-Twin-Screw-CoRotate/42275065_aa.png
View

Stock No.:

42275065

Used ICMA San Giorgio 140mm Twin Screw Extruder | 36:1 L/D | Co-Rotating | Segmented Screws | Screen Changer & Pelletizer

Used ICMA San Giorgio 140mm Twin Screw Extruder | 36:1 L/D | Co-Rotating | Segmented Screws | Screen Changer & Pelletizer. Segmented screws. Reinforced gearbox & motor. Electric panel overhauled in 2015, touch control added. Incl. Screen changer and Dry pelletizing unit. Previously used on elastomers TPE, TPU, SBS. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

https://images.aaronequipment.com/ItemImages/Mixers/Ribbon-Blenders/54445002_aa.png
View

Stock No.:

54445002

Used 140 Cu Ft Dual Shaft Ribbon Blender – Stainless Steel Industrial Mixer

Used Dual Shaft Ribbon Blender, Approximately 140 cuft / 1100 Gallon capacity. Stainless steel. Dimple Jacket. Bottom Discharge: (2) 10" ports, one for each screw, Trough dimensions: Length: 119 inches Height: 46 inches Width: 47 inches. Height off ground: 12 inches Bottom discharge. (2) 575 Volt, 15 HP motors. (Motors will be switched out to (2) Used US voltage Motors;

https://images.aaronequipment.com/ItemImages/Heat-Exchangers/Shell-and-Tube-Carbon/Southern-Heat-Exchanger-15-144-BEM_52049008_aa.jpeg
View

Stock No.:

52049008

Installed but Unused- Southern Heat Exchanger Shell & Tube Heat Exchanger, 140.

Unused, Installed and removed. Southern Heat Exchanger Shell & Tube Heat Exchanger, 140.4 Square Foot, Carbon Steel, Horizontal. Carbon steel shell rated 700 psi/ full vacuum at -20 to 300 degrees F. (61) Carbon steel 3/4" diameter x 12' long x 12 gauge straight tubes rated 198 psi / full vacuum at -20 to 400 degrees F. Openings: shell side (4) 2", tube side (2) 2". Saddle mounted. Serial# 01-041, National Board# 10959, Built 2001. Wt. 2,100#.

MFR: Southern Heat Exchanger

https://images.aaronequipment.com/ItemImages/Reactors/Stainless-Steel-1000-4999-Gallon/Tolan-1400-gallon_54480001_aa.jpg
View

Stock No.:

54480001

Unused Tolan Machinery 1,400 Gallon 316L Stainless Steel Reactor | FV/75 PSI Jacketed Vessel

Unused Tolan Machinery 1,400 Gallon 316L Stainless Steel Reactor | FV/75 PSI Jacketed Vessel. Half-pipe jacket on the shell and bottom head, rated at FV/150 PSI @ 400F. Internal vessel is rated at FV/75 PSI @ 400F. 72" overall diameter x 75" height. 316L Stainless Steel (Wetted), 304L Stainless Steel (Non Wetted) MOC. #4 internal polish, bead blast external polish. 18" top manway. 8" Agitator Nozzle four internal baffles. (4) leg mounts. NB certified. Serial# 9484. Built 2024.

MFR: Tolan

https://images.aaronequipment.com/ItemImages/Tanks/Stainless-5000-Gal-and-up/53267107_aa.jpg
View

Stock No.:

53267107

Used 14,000 Gallon 316L Stainless Steel Vertical Tank – Erected Steel Products, API-650, Built 2012

Used-14,000 gallon Erected Steel Products 316L Stainless Steel Vertical Tank. 13' diameter X 15' high straight side. Rated ATMOS @ 20 to 160 F. S/N 1168. API-650 standard. Slight cone top, flat bottom with ramped side opposite where agitator was mounted (agitator no longer available). Top fittings: 20" manway, (1) 6" vent, and (1) 12". 24" side bottom manway, (1) 2" (1) 3", (1) 6", (3) 8", (3) 10" and (1) 12" side top inlets (2) 8" side bottom outlets. Built 2012.

https://images.aaronequipment.com/ItemImages/Tanks/Stainless-5000-Gal-and-up/53267110_aa.jpg
View

Stock No.:

53267110

Used 14,000 Gallon 316L Stainless Steel Vertical Tank – Erected Steel Products, API-650, Agitated, Built 2012

Used-14,000 gallon Erected Steel Products 316L Stainless Steel Vertical Tank. 13' diameter X 15' high straight side. Rated ATMOS @ 20 to 160 F. S/N 1169. API-650 standard. Slight cone top, flat bottom with ramped side opposite where the agitator was mounted (agitator no longer available). Top fittings: 20" manway, and (1) 6" vent. 24" side bottom manway. (1) 12" and (1) 24" side top inlets. (1) 6" , (1) 8", and (1) 10" side inlets. (1) 2.5", (2) 8", (1) 3", and (1)4" side bottom outlets. Built 2012.

https://images.aaronequipment.com/ItemImages/Mixers/Plow-Mixer/Littleford-FKM-4000-D_11059342_aa.jpg
View

Stock No.:

11059342

Used Littleford Model FKM-4000-D Stainless Steel Jacketed Plough Mixer – 4000L Capacity

Used- Littleford Model FKM-4000-D Stainless Steel Jacketed Plough / Plow Mixer. 4000 Liter Capacity. Jacket rated 75 PSI at 320 Degrees F. National Board# 1272. Driven by 125 HP, 460 volt motor into gear reducer. Serial # 40671-3267. All product surfaces 316 Stainless Steel, polished to 120 Grit. OAD: Approx. 16' L x 6' W x 8' h. RECONDITIONED AND NOT USED SINCE.

MFR: Littleford

https://images.aaronequipment.com/ItemImages/Mixers/Plow-Mixer/Littleford-VT-4000_11059274_aa.jpg
View

Stock No.:

11059274

Used Littleford Vacuum Plow Mixer/Dryer – Model VT-4000 (4000L Capacity)

Used Littleford Vacuum Plow Mixer/Dryer Model VT-4000 (4000L Capacity), 304 Stainless Steel. Approximately 54" diameter x 121" straight side with dished ends. Internal rated 15 PSI/VACUUM @ 250 degrees f., Stainless steel jacket rated for 75 psi at 250 deg.f. 6" diameter shaft, 8 bolt-on plow blades, 2 end scrapers, provision for 4 choppers, air purged main seals. Driven by a 50hp motor through gearbox. Various top openings. 6" diameter off-center bottom outlet. Unit mounted on carbon steel frame. Included VFD Control Panel. National Board# 1260. Serial# 11363.

MFR: Littleford

https://images.aaronequipment.com/ItemImages/Mixers/Nauta-Mixer/Bolz-MF-400_40328055_aa.png
View

Stock No.:

40328055

Used A. Bolz MF400 Vertical Conical Mixer – 4000L Working Capacity, 316 SS, Explosion-Proof Motors, Pharma Grade

A. Bolz GmbH & Co KG Vertical Conical Batch (Nauta type) Mixer, Model MF400. Material of construction is 316 (V4A 1.4401/04) on product contact parts. Inside polished to corn 240. Total capacity 326.66 cu ft. (9250 liters), working capacity 141.25 cu. ft. (4000 liters). Not jacketed. Inside rated for 1.5 PSI (0.1 bar) at 176 deg F (80 deg C). Screw mixing device driven via a gearbox by (1) x Loher, type ENGV 160MB-160MB-04C 400-volt/50cycle/3Ph & (1) Loher, type ENCV-090LB-04 C 1.35 KW-400volt/50cycle/3Ph explosion-proof motors. Incl. Manway and bottom outlet. Hanging type incl. 3 claws. Overall dimensions 91" (2800 mm) x 91" (2800 mm) x 162" (5000 mm) high. Weight empty approx. 4 tonnes. Previously used in a Pharma application. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Bolz

https://images.aaronequipment.com/ItemImages/Dust-Collectors/Dust-Collectors/CPE-24-CFR-009-C_53083001_ae.jpg
Submit Offer $3,250 View

Stock No.:

53083001

Used CPE Filters Inc. Model 24-CFR-009-C Cartridge Filter Receiver – 400 ACFM Dust Collector

Used- CPE Filters Inc Model 24-CFR-009-C Cartridge Filter Receiver / Dust Collector, Carbon Steel, Vertical. Designed for 400 acfm. 142 Square foot filter area. Dust density 50 lbs cubic foot. Approximate 28" diameter x 36" straight side housing. Dished top, coned bottom. (9) 6" diameter x 24" long filter cartridges. Design temperature 200 degrees F. 18" x 24" Side access door. (3) Valves. 4" Diameter clean air outlet, 4" tube dusty air inlet with internal baffle. Approximately 8" center bottom outlet. Side lug mounted with (4) carbon steel legs. Serial# 5794. Does not include blower.

MFR: CPE

https://images.aaronequipment.com/ItemImages/Dust-Collectors/Dust-Collectors/CPE-24-CFR-004-C_53083002_ae.jpg
Submit Offer $3,250 View

Stock No.:

53083002

Used CPE Filters Inc Cartridge Filter Receiver / Dust Collector – Model 24-CFR-009-C, 400 ACFM

Used- CPE Filters Inc Cartridge Filter Receiver / Dust Collector, Model 24-CFR-009-C, Carbon Steel, Vertical. Designed for 400 acfm. 142 Square foot filter area. Dust density 50 lbs cubic foot. Approximate 28" diameter x 36" straight side housing. Dished top, coned bottom. (9) 6" diameter x 24" long filter cartridges. Design temperature 200 degrees F. 18" x 24" Side access door. (3) Valves. 4" Diameter clean air outlet, 4" tube dusty air inlet with internal baffle. Approximately 8" center bottom outlet. Side lug mounted with (4) carbon steel legs. Serial# 5887. Does not include blower.

MFR: CPE

https://images.aaronequipment.com/ItemImages/Heat-Exchangers/Shell-and-Tube-Stainless/Aurora_53393015_aa.jpg
View

Stock No.:

53393015

Used – Aurora Industrial Machining Horizontal Shell & Tube Heat Exchanger – 150 PSI, Carbon Steel

Used Aurora Industrial Machining Horizontal Shell & Tube Heat Exchanger, Approximately 142 square feet. Carbon Steel shell rated 150psi at -20 to 350 Degrees F. (109) 304 stainless steel straight tubes, 0.625" diameter, rated 150psi at -20 to 350 Degrees F. Openings shell: 2" (inlet), 2" (outlet), 2" (relief), tubes: 8" (inlet), (4) 3/4" (vent/drain). National Board# 3012, Serial# 4095, built 1996.

MFR: Aurora

Recently reduced items

https://images.aaronequipment.com/ItemImages/Mixers/Paddle-Mixer/Paul-O-Abbe_52919007_aa.jpeg
Submit Offer $5,190 View

Stock No.:

52919007

Used Paul O Abbe Stainless Steel Fluidizer – 0.7 Cu Ft for Sale

Used- Paul O Abbe Fluidizer, Stainless Steel. Approximate 0.7 cubic feet, 20 liter. Non jacketed trough, 16" wide x 18-1/2" long x 18-1/2" deep. (2) 1-1/2" diameter x 15" long shafts, each have (14) 3" long x 3" wide x 1/8" thick paddles on 1/2" diameter posts. Driven by (2) .33hp, 3/60/230/460 volt, 1700rpm motors, through a reducer 8:1. Bottom bombay doors. 9-1/2" Diameter bottom discharge, 20" discharge height. Includes mounted control panel. Mounted on (4) casters. Serial# A45254.

MFR: Paul O Abbe

https://images.aaronequipment.com/ItemImages/Dryers-Drying-Equipment/Rotary-Hot-Air/Summerlot_52919005_aa.jpeg
View

Stock No.:

52919005

Used Summerlot Engineered Products Dryer – 316 Stainless Steel

Used- Summerlot Engineered Products Dryer, 316 Stainless Steel. Cantilevered S/C. 12" long x 6" wide feed hopper, with a 3-3/4" diameter x 48" long screw, 3/4" pitch. Driven by a 1hp, 3/60/208-230/460 volt, 1755 rpm motor. Approximately 10" diameter x 136" long dryer vessel, with (4) fixed baffles. Driven by a 2hp, 3/60/230/460 volt, 1140 rpm motor through reducer, 5.76:1. Approximate 8" diameter discharge with a Flowseal valve. 36" Discharge height. Serial# 88211.

MFR: Summerlot

https://images.aaronequipment.com/ItemImages/Dryers-Drying-Equipment/Oven/PB-1542_50028005_aa.jpg
View

Stock No.:

50028005

Unused JBT Foodtech FORMCOOK Progrill Contact Cooker – Model PB-1542 Electric ProBake

Unused- JBT Foodtech FORMCOOK Progrill Contact Cooker. Model PB-1542 Electric ProBake. With 10 Degree Incline and Top Belt. Overall Belt Width 60". Usable Belt Width 59", Cooking Length 13.78'. Seven Lower Electric Platens, Upper and Lower Teflon Style Belting. Electrical Specifications 460/3/60 (110/1/60), Electric Drive, Basic Belt Cleaning System, Digital Read-out System, 12" Out-feed Conveyor, Standard Exhaust Fan. Controllogix Processor disconnects on all motors. HMI Screen A. Platens 3/60/460 / 1/60/110 Electric Drive.

https://images.aaronequipment.com/ItemImages/Mills/Pebble-Mill/52038001_aa.jpg
Submit Offer $2,500 View

Stock No.:

52038001

Used - Paul O Abbe Ball Mill / Pebble Mill, Carbon Steel, 26 Gallon

Used- Paul O Abbe Ball Mill / Pebble Mill, Carbon Steel. Approximate 26 Gallon Total Volume. Jacket chamber approximate 18" diameter x 24-1/2" long. Driven by a 3hp, 3/220/440 volt motor. Rotary unions. Manhole cover. Mounted on a painted carbon steel frame.

Explore our guides.

Enhance your equipment knowledge with our resources.

August 20, 2026

Guide to Equipment Photography for Faster Sales

Learn equipment photography tips that can help sell used machinery faster, including 360° photos, clean backgrounds, spec tags, lighting, and image quality.

Blog Used Equipment

April 7, 2026

Everything You Should Know Before Buying Used Cannabis Equipment

The cannabis industry has been booming, and with this growth comes the need for efficient and cost-effective manufacturing solutions.

Cannabis Industry Blog

April 7, 2026

Everything You Should Know Before Buying A Used Stainless Steel Tank

What do you need to know before buying a stainless-steel tank?

Tanks Blog

Sell Equipment

Have surplus equipment? We offer flexible options including direct purchase, consignment, or listing on our marketplace — all backed by trusted professionals.

Learn about selling

Buy Used Equipment

Discover one of the world’s largest inventories of used processing and packaging equipment — ready to ship and backed by decades of industry expertise.

Browse all equipment

Auctions

Join global buyers and sellers at AIS-hosted auctions featuring top-quality surplus equipment from leading facilities around the world.

View current auctions