CALL 630-350-2200
View All Equipment Auctions OEM & New Equipment
Appraisals Equipment Reconditioning Asset Management Plant Liquidation Financing Centrifuge Parts & Services
Company Overview Meet Our Team Locations & Contact

Explore our extensive equipment marketplace

Discover a wide range of used processing and packaging machinery tailored to meet your industry needs. Use our advanced search features to find the perfect equipment quickly and efficiently.

Recently added products

Clear
https://images.aaronequipment.com/ItemImages/General-Equipment/General-Equipment/36_54544001_aa.jpeg
View

Stock No.:

54544001

Used Shivvers 36' Diameter Hemp & Biomass Drying System – 2,000 Cubic Foot Capacity – Built 2024

Used Shivvers 36' Diameter Hemp & Biomass Drying System 2,000 Cubic Foot Capacity Built 2024. System consists of: Command center control unit; Fan and heater combinations; Perforated Raised drying floor; Automated Spreading, leveling, and unloading auger; and Automated stirring and decompaction rotor. Built 2024.

https://images.aaronequipment.com/ItemImages/General-Equipment/General-Equipment/36_54544002_aa.jpeg
View

Stock No.:

54544002

Used Shivvers 36' Hemp & Biomass Drying System with Automated Material Handling

Used- Used Shivvers 36' Hemp & Biomass Drying System with Automated Material Handling. 36' diameter. 2,000 cubic foot capacity. System consists of: Command center control unit; Fan and heater combinations; Perforated Raised drying floor; Automated Spreading, leveling, and unloading auger; and Automated stirring and decompaction rotor. Built 2024.

https://images.aaronequipment.com/ItemImages/Plastics-Equipment/Size-Reduction-Grinders-and-Granulators/Cumberland-284-GRAN-3_54599004_ab.jpg
Submit Offer $6,500 View

Stock No.:

54599004

Used- Cumberland Granulator, Model 284 GRAN 3KN, Serial# 425000-7644.

MFR: Cumberland

https://images.aaronequipment.com/ItemImages/Dryers-Drying-Equipment/Drum-Dryers/Andritz-T15-40KD_54597001_aa.jpeg
View

Stock No.:

54597001

Used Andritz Gouda T15/40KD Double Drum Dryers – 408 Sq. Ft. Drying Area Each | Lot of (2)

Used- Lot of (2) Andritz Gouda Double Drum Dryers, Model T15/40KD. Drums: 1508 MM (59.37") diameter x 4000 MM (157.48") face, cast iron rolls, not chrome plated. 204 square feet per drum / 408 square feet total drying area per dryer. Drums rated for 13 bar design pressure at 195C maximum, steam heated, 6,125 liter volume per drum. 1.515 RPM drum speed. 18.5 kW drive. Two (2) discharge augers, 560mm diameter x 5,995mm long, each driven by a 1.5 kW motor at 80 rpm. Equipped with stainless steel hood and hydraulic bearing lube system. CE marked. Built 2021.

MFR: Andritz

https://images.aaronequipment.com/ItemImages/Cannabis-Equipment/Extraction-and-Processing-Equipment/PE-5-200_54578001_aa.jpg
View

Stock No.:

54578001

Used Pure Extraction PE-5-200 5-Liter Closed-Loop Supercritical CO2 Extractor – Commercial CO2 Extraction System

Used Pure Extraction PE-5-200 5-Liter Closed-Loop Supercritical CO2 Extractor Commercial CO2 Extraction System. Processes approximately 1 pound of material per run, about 2 hours. Features a 5-liter extraction vessel, liquid CO2 tank with syphon tube, solid-state heating, stainless steel construction, and ultrasonic cleaner. Includes extra gaskets and filters. Designed for precise temperature and pressure control in commercial extraction applications. Can be run on single phase or three phase electrical.

https://images.aaronequipment.com/ItemImages/Mixers/Planetary-Mixer/54574001_aa.jpg
View

Stock No.:

54574001

Unused TSI 175 Liter Planetary Disperser Battery Slurry Mixer

Unused TSI Col, Ltd. PD (Planetary-Disperser Mixer), "Planetary Mixer". Total capacity 250 liter, working capacity 175 liter. 304 Stainless steel contact areas. Planetary and disperser blade. Jacket rated 101.5 psi (0.7MPaG) at 0 to 176 degrees F (-18 to 80 C). Hydraulic lift. Serial# 22013-T04-01. Year 2023. Dimensions: 126"L x 67"W x 126"H. Weight: 16,100lbs. 3/60/480 Volt. Designed for lithium-ion battery anode slurry production.

https://images.aaronequipment.com/ItemImages/Evaporators/Wipe-Film-Thin-Film/Pope-Scientific_54568001_aa.jpg
View

Stock No.:

54568001

Used Pope Solution Driven Whip Film Evaporator

Used-Pope Solution Driven Whip Film Evaporator Equipped w/ Pope Scientific Kurt J Lesker Digital Module with KB Electronics Penta-Drive NEMA -4X/IP-65 Motor Control (UNIT DISSASSEMBLED)

MFR: Pope Scientific

https://images.aaronequipment.com/ItemImages/Extruders-Non-Plastic/Extruders-Non-Plastic/E140-MkIII_54569001_aa.jpg
View

Stock No.:

54569001

Used Aeromatic Fielder Nica E140 MkIII Extruder – Stainless Steel Pharmaceutical & Granulation Extrud

Used- GEA Aeromatic Fielder Nica Extruder, Model E140 MkIII. Stainless steel contact surfaces. 150mm (5.5") screw. nominally rated .5 - 2 kg/minute capacity. 20-160 rpm, .37 kw feeder motor. 20-140 rpm, .75 kw impeller motor. Variable speed feeder and impeller. On stand. 3/60/380-460V. Serial# 865800. Built 2009.

https://images.aaronequipment.com/ItemImages/Mills/Ball-Mill/SBM-7272-170_54623001_aa.jpg
View

Stock No.:

54623001

Used Orbis Machinery SBM-7272-170 1,269-Gallon Jacketed Horizontal Ball Mill – 150 HP, AR-400 Steel

Used- Orbis Machinery Model SBM-7272-170 jacketed horizontal ball mill with approximately 1,269-gallon (169.7-cu.-ft.) cylinder capacity, designed for a maximum media loading of approximately 25,380 lb. of steel media at 50% volume and dry-product loading of approximately 42.5 cu. ft. at 25% volume. The cylinder inner shell and heads are constructed of abrasion-resistant AR-400 steel, the jacket shell is SA-516 Grade 70 carbon steel, and the dry-discharge shroud and support stands are A-36 or better structural steel. The cylinder is rated for atmospheric pressure, and the jacket is rated for 15 PSIG at 250F. Equipped with a 150 HP C-face TEFC motor with brake, rated 460-volt, 3-phase, 60-Hz, and a hollow-bore C-face gear reducer providing a maximum cylinder speed of 22 RPM, reduced to 20 RPM through a variable-frequency drive. Includes a dry-product discharge shroud, cylinder indexing system with sensor and target disc, dual-flow 3-inch NPT rotary union, siphon-tube assembly, shaft seals, two 8-15/16-inch-bore pillow-block bearings, drive-end and idler-end support stands, a 20" x 20" inch loading hatch with tool-free quick-opening handles, 14" x 16" inspection opening with bolt-on cover, approximately 10" x 10" bottom discharge with drilled flange for a customer-supplied valve, vibrator mounts, 2-1/2" NPT jacket-feed connection, 1-1/4" NPT jacket-return connection, and stainless-steel jacket piping, fittings, unions and flexible hose assemblies. Approximate overall dimensions are 247-7/8" long x 96 inches wide x 154-1/16" high, with an approximate machine weight of 34,000 lb.

https://images.aaronequipment.com/ItemImages/Dryers-Drying-Equipment/Spray-Dryer/PSD-02_54624001_aa.jpg
View

Stock No.:

54624001

Used Hemraj PSD 02 Stainless Steel Spray Dryer – 22 Lb/Hr Water Evaporation, Two-Fluid Nozzle Atomization

Used Hemraj PSD 02 Stainless Steel Spray Dryer 22 Lb/Hr Water Evaporation, Two-Fluid Nozzle Atomization. 316 stainless steel contact parts. 304 stainless steel non-contact parts. 36" diameter x 69" straight side chamber size. Two-fluid compressed air nozzle atomizer 10 kg/hour (approximately 22 lbs/hour) water evaporation capacity. 14.5 kg/hour (approximately 32 lbs/hour) feed rate w/ 30% dry solids feed. 4.5 kg/hour (approximately 10 lbs/hour) powder rate. Ambient- 260 degrees C (500 degrees F) inlet temperature. 95-100 degrees C (203-212 degrees F) outlet temperature. 30-40 degrees C (86-104 degrees F) ambient temperature. 760mm Hg atmospheric pressure. 50% relative humidity. Blown down" powder collection method. Electric air heater heat source. 3/50/440V electric motor. Built 2014. Previously used for organic biopesticides.

https://images.aaronequipment.com/ItemImages/Centrifuges/Decanter/Alfa-Laval-G2-100_54630001_aa.jpg
View

Stock No.:

54630001

Refurbished Alfa Laval G2-100 Decanter Centrifuge – 100 HP, 2,900 RPM, 2,700 G Solid-Liquid Separation

Used- Refurbished Alfa Laval Decanter Centrifuge, Model G2-100. Driven by a 100 HP main motor with a maximum bowl speed of 2,900 RPM, delivering 2,700 G's. Includes a 30 HP backdrive motor. Bowl diameter, internal 575/326 mm. Designed for product temperatures between 0 and 100 degrees C. Has refurbished planetary gearbox 16KnM, 127:1 ratio. Approximate overall footprint of 51.5'' wide x 225" long x 78" tall. Previously used in organic processing facility for low gravity solid dewatering application. Serial # 5023294, built 2006.

MFR: Alfa Laval

https://images.aaronequipment.com/ItemImages/Mixers/Homogenizer-Mixers/Makwell-MWM-350L_54627001_aa.jpg
View

Stock No.:

54627001

Used Makwell MWM-350L 350-Liter Vacuum Emulsifying Mixer – 316L SS Homogenizer with Steam Generator & Auxiliary Tanks

Used- Makwell Machinery Vacuum Emulsifying Mixer, MWM-350L. 316L stainless steel contact parts. 350 liter design capacity, 300 liter maximum working capacity, 110 liter minimum working capacity. Components include emulsifying pot, oil pot, and water pot. Features hydraulic lifting and tilting system, upper homogenizer/sweep wall stirrer, vacuum pump, and temperature controller. With platform, 72 kW steam generator, 500 liter storage tank, 1,000 liter/hour diaphragm pump, and transfer pump. Built 2023.

MFR: Makwell

Recently reduced items

https://images.aaronequipment.com/ItemImages/Mixers/Paddle-Mixer/Paul-O-Abbe_52919007_aa.jpeg
Submit Offer $5,190 View

Stock No.:

52919007

Used Paul O Abbe Stainless Steel Fluidizer – 0.7 Cu Ft for Sale

Used- Paul O Abbe Fluidizer, Stainless Steel. Approximate 0.7 cubic feet, 20 liter. Non jacketed trough, 16" wide x 18-1/2" long x 18-1/2" deep. (2) 1-1/2" diameter x 15" long shafts, each have (14) 3" long x 3" wide x 1/8" thick paddles on 1/2" diameter posts. Driven by (2) .33hp, 3/60/230/460 volt, 1700rpm motors, through a reducer 8:1. Bottom bombay doors. 9-1/2" Diameter bottom discharge, 20" discharge height. Includes mounted control panel. Mounted on (4) casters. Serial# A45254.

MFR: Paul O Abbe

https://images.aaronequipment.com/ItemImages/Mills/Hammer-Mill/Quadro-196_50647001_aa.jpg
View

Stock No.:

50647001

Used - Quadro Comil Model 196, 304/316 Stainless Steel, 8,000 Lbs/Hr Capacity, 10 HP

Used- Quadro Comil, Model 196, 304 Stainless Steel. Approximate capacity up to 8,000 pounds an hour. 8" diameter top feed, 12" diameter bottom discharge. 12' dia x 12' dia housing. Requires (missing) impeller and impeller hardware. Housing 304 stainless steel, shaft and discharge chute 316 stainless steel. Driven by a 10 hp, 3/60/208-230/460 Volt, 1750 rpm motor. Serial# 0387.

MFR: Quadro

https://images.aaronequipment.com/ItemImages/Dryers-Drying-Equipment/Rotary-Hot-Air/Summerlot_52919005_aa.jpeg
View

Stock No.:

52919005

Used Summerlot Engineered Products Dryer – 316 Stainless Steel

Used- Summerlot Engineered Products Dryer, 316 Stainless Steel. Cantilevered S/C. 12" long x 6" wide feed hopper, with a 3-3/4" diameter x 48" long screw, 3/4" pitch. Driven by a 1hp, 3/60/208-230/460 volt, 1755 rpm motor. Approximately 10" diameter x 136" long dryer vessel, with (4) fixed baffles. Driven by a 2hp, 3/60/230/460 volt, 1140 rpm motor through reducer, 5.76:1. Approximate 8" diameter discharge with a Flowseal valve. 36" Discharge height. Serial# 88211.

MFR: Summerlot

https://images.aaronequipment.com/ItemImages/Dryers-Drying-Equipment/Oven/PB-1542_50028005_aa.jpg
View

Stock No.:

50028005

Unused JBT Foodtech FORMCOOK Progrill Contact Cooker – Model PB-1542 Electric ProBake

Unused- JBT Foodtech FORMCOOK Progrill Contact Cooker. Model PB-1542 Electric ProBake. With 10 Degree Incline and Top Belt. Overall Belt Width 60". Usable Belt Width 59", Cooking Length 13.78'. Seven Lower Electric Platens, Upper and Lower Teflon Style Belting. Electrical Specifications 460/3/60 (110/1/60), Electric Drive, Basic Belt Cleaning System, Digital Read-out System, 12" Out-feed Conveyor, Standard Exhaust Fan. Controllogix Processor disconnects on all motors. HMI Screen A. Platens 3/60/460 / 1/60/110 Electric Drive.

Explore our guides.

Enhance your equipment knowledge with our resources.

August 20, 2026

Guide to Equipment Photography for Faster Sales

Learn equipment photography tips that can help sell used machinery faster, including 360° photos, clean backgrounds, spec tags, lighting, and image quality.

Blog Used Equipment

April 7, 2026

Everything You Should Know Before Buying Used Cannabis Equipment

The cannabis industry has been booming, and with this growth comes the need for efficient and cost-effective manufacturing solutions.

Cannabis Industry Blog

April 7, 2026

Everything You Should Know Before Buying A Used Stainless Steel Tank

What do you need to know before buying a stainless-steel tank?

Tanks Blog

Sell Equipment

Have surplus equipment? We offer flexible options including direct purchase, consignment, or listing on our marketplace — all backed by trusted professionals.

Learn about selling

Buy Used Equipment

Discover one of the world’s largest inventories of used processing and packaging equipment — ready to ship and backed by decades of industry expertise.

Browse all equipment

Auctions

Join global buyers and sellers at AIS-hosted auctions featuring top-quality surplus equipment from leading facilities around the world.

View current auctions