CALL 630-350-2200
View All Equipment Auctions OEM & New Equipment
Appraisals Equipment Reconditioning Asset Management Plant Liquidation Financing Centrifuge Parts & Services
Company Overview Meet Our Team Locations & Contact

Explore our extensive equipment marketplace

Discover a wide range of used processing and packaging machinery tailored to meet your industry needs. Use our advanced search features to find the perfect equipment quickly and efficiently.

Recently added products

Clear
https://images.aaronequipment.com/ItemImages/Kettles/Stainless-Steel-0-499-Gallon/Hamilton_11252214_aa.jpg
View

Stock No.:

11252214

Used Hamilton 200-Gallon Stainless Steel Agitated Kettle – 120 PSI Jacket

Used- Hamilton 200 Gallon Agitated Kettle, stainless steel construction with 3/4 jacket, rated for 120 PSI at 342 degrees F. Features top mounted full sweep agitator, currently less drive. Hinged lid top covers. Hemispherical bottom with 2-1/2" diameter center bottom outlet.

MFR: Hamilton

https://images.aaronequipment.com/ItemImages/Blowers/Blowers/No_42467005_a.jpg
Submit Offer $5,000 View

Stock No.:

42467005

Used Carbon Steel Blower – 200 HP, 8" x 44" Housing, 12" x 36" Inlet

Used- Blower, Carbon Steel. Approximate 8" x 44" housing. Driven by a 200 HP, 460 Volt, 3570 RPM motor. 12" x 36" inlet, 8" x 16" outlet.

MFR: No

https://images.aaronequipment.com/ItemImages/Mixers/Double-Arm-Mixer/Werner-and-Pfleiderer-UK17_44974a.jpg
View

Stock No.:

44974

Used Werner & Pfleiderer UK17 Double Arm Mixer – 200 Gal, Stainless Steel Clad, Jacketed

Used- Werner & Pfleiderer Double Arm Mixer, Model UK17, Stainless Steel Clad 200 Gallon. Sigma tangential blades, jacketed bowl (bottom only) 43" front-back x 53" left-right x approximately 36" deep. Geared both ends. Set up for hydraulic tilt 7.5 hp, 220/440V, 1750 rpm. No base, no drive. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Werner & Pfleiderer

https://images.aaronequipment.com/ItemImages/Plastics-Equipment/Size-Reduction-Dual-Rotor-or-Single-Rotor-Shredders/SSI-M100H75_46389003_aa.jpg
View

Stock No.:

46389003

Heavy-Duty SSI Two-Shaft Shredder – Model M100H(75) for Bulky Material

Used SSI Dual-Shear Shredder, Model M100H(75), Hydraulic Drive, 200 HP. 50mm (2") Cutter Thickness, 530mm (20.9") Cutter Diameter, 188mm (74") Shaft Diameter, 1,040mm x 1,600mm (40.9" x 63") Cutting Chamber, 1,562mm x 2,502mm (61.5" x 98.5") Hopper Opening. 140 Gallon Hydraulic Power Unit. The Dual-Shear M100 from SSI Shredding Systems is a low-speed, high-torque, two-shaft, rotary shear shredder engineered and built to efficiently process a wide variety of difficult to shred materials. Dual-Shear M100 industrial shredders are versatile machines commonly employed in bulky item reduction, product destruction or pre-conditioning (primary shredding) where particle size variation is acceptable. Output consists of strips" the width of the cutters - usually 25mm-76 mm (1"-3"). Built 2013.

MFR: SSI

https://images.aaronequipment.com/ItemImages/Mixers/Double-Arm-Mixer/Howard_50059005_aa.jpg
View

Stock No.:

50059005

Used Howard 200 Gallon Double Arm Mixer – 304 Stainless Steel, Hydraulic Tilt

Used- Howard Double Arm Mixer, Approximate 200 Gallon, 304 Stainless Steel. Non-jacketed bowl approximate 50" left to right x 44-1/8" front to back x 34-1/2" deep. Overlapping sigma blades set up for hydraulic drive, no power pack. Dual ram hydraulic tilt, top safety grate. Mounted on a stainless steel frame. Serial# H3649-2, built 2001.

MFR: Howard

https://images.aaronequipment.com/ItemImages/Mills/Hammer-Mill/Schutte_50823099_aa.jpg
View

Stock No.:

50823099

Used 600 HP Schutte-Buffalo Hammermill with Twin City Blower, Heavy-Duty

Used- Schutte-Buffalo-Astec Model AHM-20 Carbon Steel Hammermill. Approximate 48" diameter x 50" wide rotor. Top feed with hopper, bottom discharge. Driven by a 600 HP, 3/60/460 volt, 1790 rpm motor. Mounted on a frame. Serial# 16088HM1. Includes a Twin City blower, Type RBR-SW, size 926, driven by a 200 HP, 3/60/230/460 volt, 1785 rpm motor. Astec serial# 16088HM1.

MFR: Schutte

https://images.aaronequipment.com/ItemImages/Mixers/Planetary-Mixer/Charles-Ross-HDM-200_51065004_aa.jpg
View

Stock No.:

51065004

Ross Model HDM 200 Double Planetary 200 Gallon Mixer

Used- Ross Double Planetary Mixer, Model HDM 200. 30-200 Gallon working capacity. (2) Carbon Steel Stirrers approximate orbital speed 24 rpm, stirrer speed 26 rpm. Top dust hood with charge port, bottom fume hood, hydraulic lift with power pack. Includes (1) 44'' diameter x 33-3/4'' deep can. Driven an 40 HP, 3/60/460 VOLT, 1740 rpm XP motor, thru Delroyd model HV120 reduction gear, 74.21 to 1 ratio. Mounted on an I beam frame. Serial# 35555. Additional mix cans available for purchase at additional cost, subject to availability.

MFR: Charles Ross

https://images.aaronequipment.com/ItemImages/Mixers/Ribbon-Blenders/51258020_aa.jpg
View

Stock No.:

51258020

Used Industrial Ribbon Blender, 200 Cubic Foot, Stainless Steel, 50 HP with Rotary Valve

Used Stainless Steel Double Spiral Ribbon Blender. Approximate 200 cubic foot capacity. Has top cover and (2) bag dump stations. 50 HP motor & reducer. Center bottom outlet with rotary valve.

https://images.aaronequipment.com/ItemImages/Kettles/Stainless-Steel-0-499-Gallon/Hamilton_52905003_aa.jpg
View

Stock No.:

52905003

Hamilton 200 Gallon Triple Motion Stainless Steel Kettle

Used- Hamilton 200 Gallon Triple Motion Stainless Steel Kettle. 48" dia x 36" deep. Hemispherical bottom. Side/bottom scrape triple agitation with pivoting bridge. Jacket rated 125 PSI @ 345 Deg F. 5HP drive, 3/50/60/230/460V. Split stainless lids. 3" Tri-Clamp discharge fitting. Serial# 2475, National Board# A8223. Last used in food.

MFR: Hamilton

https://images.aaronequipment.com/ItemImages/Plastics-Equipment/Size-Reduction-Dual-Rotor-or-Single-Rotor-Shredders/SSI-SR375_53026001_aa.jpeg
View

Stock No.:

53026001

Used SSI Single Rotor Shredder, Model SR-375 | 52.4" x 15" Rotor | 200 HP Drive | 111 RPM | Control Panel Included

Used- SSI Single Rotor Shredder. Model SR-375. 52.4" wide x 15" diameter rotor. 30/60/90 cutters. 111rpm rotor speed. Driven by a 200hp motor. With control panel. Serial# U0008-SR375. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: SSI

https://images.aaronequipment.com/ItemImages/Kettles/Stainless-Steel-0-499-Gallon/Cherry-Burrell_53147035_aa.jpg
View

Stock No.:

53147035

Used Cherry-Burrell 200 Gallon Stainless Steel Jacketed Processor Tank – Scrape Surface Agitation

Used- Cherry-Burrell 200 Gallon Cone-Bottom Stainless Steel Jacketed Processor Tank with Scrape Surface Agitation. Vessel measures 48" diameter x 30" deep with bridge mount agitation, hinged lids, and 2-1/2" center bottom outlet with tri-clamp connection. Agitator is driven by 3 HP, 230/460V, 3/60 Hz, 1700 RPM motor thru right-angle gearbox with 85.65:1 ratio, resulting in 20 output RPM. Vessel includes self contained heating system for jacket with an electrically heated inline heater and small centrifugal circulation pump. Unitized on stainless steel frame with (4) legs. Serial number E-524-9. Previously used at dairy processing facility.

MFR: Cherry Burrell

https://images.aaronequipment.com/ItemImages/Mixers/Double-Arm-Mixer/Aaron-Process-MBG200-125_53147081_ab.jpg
View

Stock No.:

53147081

Used Aaron Process 200 Gallon (26.74 cubic feet) capacity Vacuum Drying Sigma Mixer – All Stainless, 125 HP, Jacketed, ASME

Used Aaron Process 200 Gallon (26.74 cubic feet) capacity Vacuum Drying Sigma Mixer All Stainless, 125 HP, Jacketed, ASME. Cored shafts, jacketed trough, and double nobben blades. Model MBG200-125 All stainless steel construction. All parts are insulated and sheathed with 304 Stainless steel and polished to 150 - 180 grit finish. Mixing/drying chamber includes vacuum cover and is jacketed, rated for 200 PSI at 450 degrees Fahrenheit / negative 20 degrees Fahrenheit, ASME code constructed. Mixing chamber measures 48" x 40" x 44" deep and includes (2) 6" diameter flanged discharges with ball valves. Blades are overlapping double nobben blades and driven by 125 HP motor thru heavy duty gearbox, 160 Amps and 460 volts. Manufactured in 2000. Serial number 00200125643MBG. Previously used in clean room type environment. Complete with control panel and unitized on heavy duty frame. Includes main control panel, power panel with starters and VFD's, steam-to-water heat exchanger for heating of jacket and hydraulic pump/reservoir for opening vessel lid. Also includes top mounted, stainless steel Mikro Pulsaire dust collector, Model 10-2-FV TR.

MFR: Aaron Process

Recently reduced items

https://images.aaronequipment.com/ItemImages/Mixers/Paddle-Mixer/Paul-O-Abbe_52919007_aa.jpeg
Submit Offer $5,190 View

Stock No.:

52919007

Used Paul O Abbe Stainless Steel Fluidizer – 0.7 Cu Ft for Sale

Used- Paul O Abbe Fluidizer, Stainless Steel. Approximate 0.7 cubic feet, 20 liter. Non jacketed trough, 16" wide x 18-1/2" long x 18-1/2" deep. (2) 1-1/2" diameter x 15" long shafts, each have (14) 3" long x 3" wide x 1/8" thick paddles on 1/2" diameter posts. Driven by (2) .33hp, 3/60/230/460 volt, 1700rpm motors, through a reducer 8:1. Bottom bombay doors. 9-1/2" Diameter bottom discharge, 20" discharge height. Includes mounted control panel. Mounted on (4) casters. Serial# A45254.

MFR: Paul O Abbe

https://images.aaronequipment.com/ItemImages/Mills/Hammer-Mill/Quadro-196_50647001_aa.jpg
View

Stock No.:

50647001

Used - Quadro Comil Model 196, 304/316 Stainless Steel, 8,000 Lbs/Hr Capacity, 10 HP

Used- Quadro Comil, Model 196, 304 Stainless Steel. Approximate capacity up to 8,000 pounds an hour. 8" diameter top feed, 12" diameter bottom discharge. 12' dia x 12' dia housing. Requires (missing) impeller and impeller hardware. Housing 304 stainless steel, shaft and discharge chute 316 stainless steel. Driven by a 10 hp, 3/60/208-230/460 Volt, 1750 rpm motor. Serial# 0387.

MFR: Quadro

https://images.aaronequipment.com/ItemImages/Dryers-Drying-Equipment/Rotary-Hot-Air/Summerlot_52919005_aa.jpeg
View

Stock No.:

52919005

Used Summerlot Engineered Products Dryer – 316 Stainless Steel

Used- Summerlot Engineered Products Dryer, 316 Stainless Steel. Cantilevered S/C. 12" long x 6" wide feed hopper, with a 3-3/4" diameter x 48" long screw, 3/4" pitch. Driven by a 1hp, 3/60/208-230/460 volt, 1755 rpm motor. Approximately 10" diameter x 136" long dryer vessel, with (4) fixed baffles. Driven by a 2hp, 3/60/230/460 volt, 1140 rpm motor through reducer, 5.76:1. Approximate 8" diameter discharge with a Flowseal valve. 36" Discharge height. Serial# 88211.

MFR: Summerlot

https://images.aaronequipment.com/ItemImages/Tanks/Stainless-1000-4999-Gal/54567010_aa.jpeg
View

Stock No.:

54567010

Used Paul Mueller 1,500 Gallon 304 Stainless Steel Tank

Used Paul Mueller Company stainless steel pressure vessel, Type 304 stainless steel construction, 76" diameter x Height 170" to top mixer. 145" to top hatch, Top hatch 24" diameter x Legs 56" x 56". Serial# 106184-1, built 1992. Vessel manufactured to DIN Part RT4 pressure vessel standards. Unit designed for heat transfer service with heating surface (exact area not legible). Tank is rated Atmospheric.

Explore our guides.

Enhance your equipment knowledge with our resources.

August 20, 2026

Guide to Equipment Photography for Faster Sales

Learn equipment photography tips that can help sell used machinery faster, including 360° photos, clean backgrounds, spec tags, lighting, and image quality.

Blog Used Equipment

April 7, 2026

Everything You Should Know Before Buying Used Cannabis Equipment

The cannabis industry has been booming, and with this growth comes the need for efficient and cost-effective manufacturing solutions.

Cannabis Industry Blog

April 7, 2026

Everything You Should Know Before Buying A Used Stainless Steel Tank

What do you need to know before buying a stainless-steel tank?

Tanks Blog

Sell Equipment

Have surplus equipment? We offer flexible options including direct purchase, consignment, or listing on our marketplace — all backed by trusted professionals.

Learn about selling

Buy Used Equipment

Discover one of the world’s largest inventories of used processing and packaging equipment — ready to ship and backed by decades of industry expertise.

Browse all equipment

Auctions

Join global buyers and sellers at AIS-hosted auctions featuring top-quality surplus equipment from leading facilities around the world.

View current auctions