August 20, 2026
Guide to Equipment Photography for Faster Sales
Learn equipment photography tips that can help sell used machinery faster, including 360° photos, clean backgrounds, spec tags, lighting, and image quality.
Discover a wide range of used processing and packaging machinery tailored to meet your industry needs. Use our advanced search features to find the perfect equipment quickly and efficiently.
Cannabis Equipment
5 subcategories
Dryers - Drying Equipment
13 subcategories
Mills
10 subcategories
Packaging Equipment
40 subcategories
72 Categories
(1)
(63)
(46)
(60)
(23)
(29)
(27)
(26)
(42)
(21)
(9)
(33)
(24)
(51)
(23)
(14)
(63)
(3)
(25)
(59)
(37)
(11)
(20)
(23)
(1)
(5)
(6)
745 Manufacturers
Browse all equipmentStock No.:
54471001Used- Ripley Stainless 4,000 Gallon Fermenter Tank. 304 stainless steel. 6.5' diameter x approx. 19' height. 15 PSI working pressure. Cone bottom. On (4) legs. Serial# 186. Built 1995. Previously used in brewery application.
Stock No.:
54334001Used- 450 Ton Marley Double Flow Cooling Tower Model MHF7113. 410-746 ton cooling capacity, based on 3gpm/ton at 95 f hot water 85 F cold water 78 F wet bulb configuration. Built 2016. Dimensions 13'-11" long x 25'-10" wide x 22' tall 41,310lbs.
MFR: Marley
Stock No.:
10151628Used- Mueller 4,150 gallon Stainless Steel Jacketed Tank.97 7/16" OD x 219". Internal rated 15 psi at 100 degrees F.304 stainless steel, vertical, dished head, cone bottom.Serial # 164585-1. Previous use was for brewery fermentation.
MFR: Mueller Corp
Stock No.:
10151629Mueller 4,150 Gallon Stainless Steel Fermentation Tank Jacketed Vessel.97 7/16" OD x 219". Internal rated 15 psi at 100 degrees F.304 stainless steel, vertical, dished head, cone bottom. Serial # 164585-2.Previous use was for brewery fermentation.
MFR: Mueller Corp
Stock No.:
10151630Used Mueller 4,150 Gallon Brewery Fermenter Stainless Steel Tank. 97 7/16" OD x 219".Internal rated 15 psi at 100 degrees F.304 stainless steel, vertical, dished head, cone bottom.Serial # 164585-3.Previous use was for brewery fermentation.
MFR: Mueller Corp
Stock No.:
51781001Used- Double Drum Dryer. (2) Approximate 42" diameter x 120" face chrome plated rolls, each rated 160 psi at -20 to 650 degrees F, serial #s 490K and 491K. National Board #s 425 and 426, built 2006, certified by PFE Rolls. Each roll set up for a hydraulic drive. 15HP Hydraulic power pack. Dual knife scraper, top fume hood, edge guides and panel. Mounted on stainless steel end frames.
Stock No.:
51781003Used- Double Drum Dryer. (2) Approximate 42" diameter x 120" face chrome plated rolls. Approximate rating 100 psi at 450 degrees F. National Board# 1782-2, Certified by Beloit / Overton Machine Co, Built 1962. Each roll set up for a hydraulic drive. 15HP Hydraulic power pack. Dual knife scraper, top fume hood, edge guides and panel. Mounted on stainless steel end frames.
Stock No.:
53183002Unused Scott TSM42156 Twin-Shaft Continuous Mixer 5 TPH Industrial Continuous Paddle Blender. 42" x 156" shaft dimensions. Designed for 33 lbs/cubic foot. Rated 5 tons/hour. 5 minute retention time. Carbon steel construction. 12" x 24" inlet, 12" x 36" discharge. 120 RPM blender speed. 20 HP shaft mount gear reducer. Driven by a 20 HP, 3/60/230-460V motor. Built 2021.
MFR: Scott Turbon
Stock No.:
54039002Used- Spray Dynamics Spray Coating System. Consisting of: Heat and Control Fast Back conveyor feeder, Model CV-FB200A15; Spray Dynamics Soft Flight stainless steel coating drum (42" D x 96" L) w/ Model MS-III liquid applicator; Uni-Spense dry ingredient dispensing system; Tank system w/ 150 gallon stainless steel mix tank w/ agitation and 200 gallon stainless steel single wall tank w/ agitation; Control panel. Built 2008. Previously used for cereal.
Stock No.:
54391001Used- EVAPCO Process Cooling Tower, Model ATWB 4-3E9 Z. Approximately 42 Nominal Tons. 131 GPM flow rate. Closed Circuit. (2) 2 HP fans, approximate 18,110 CFM. 100 degrees F entering fluid temperature, 90 degrees F leaving fluid temp, 78 degrees F wet-bulb temperature. Stainless steel basin. Built 2018.
MFR: Evapco
Stock No.:
52919007Used- Paul O Abbe Fluidizer, Stainless Steel. Approximate 0.7 cubic feet, 20 liter. Non jacketed trough, 16" wide x 18-1/2" long x 18-1/2" deep. (2) 1-1/2" diameter x 15" long shafts, each have (14) 3" long x 3" wide x 1/8" thick paddles on 1/2" diameter posts. Driven by (2) .33hp, 3/60/230/460 volt, 1700rpm motors, through a reducer 8:1. Bottom bombay doors. 9-1/2" Diameter bottom discharge, 20" discharge height. Includes mounted control panel. Mounted on (4) casters. Serial# A45254.
MFR: Paul O Abbe
Stock No.:
52919005Used- Summerlot Engineered Products Dryer, 316 Stainless Steel. Cantilevered S/C. 12" long x 6" wide feed hopper, with a 3-3/4" diameter x 48" long screw, 3/4" pitch. Driven by a 1hp, 3/60/208-230/460 volt, 1755 rpm motor. Approximately 10" diameter x 136" long dryer vessel, with (4) fixed baffles. Driven by a 2hp, 3/60/230/460 volt, 1140 rpm motor through reducer, 5.76:1. Approximate 8" diameter discharge with a Flowseal valve. 36" Discharge height. Serial# 88211.
MFR: Summerlot
Stock No.:
50028005Unused- JBT Foodtech FORMCOOK Progrill Contact Cooker. Model PB-1542 Electric ProBake. With 10 Degree Incline and Top Belt. Overall Belt Width 60". Usable Belt Width 59", Cooking Length 13.78'. Seven Lower Electric Platens, Upper and Lower Teflon Style Belting. Electrical Specifications 460/3/60 (110/1/60), Electric Drive, Basic Belt Cleaning System, Digital Read-out System, 12" Out-feed Conveyor, Standard Exhaust Fan. Controllogix Processor disconnects on all motors. HMI Screen A. Platens 3/60/460 / 1/60/110 Electric Drive.
Stock No.:
52038001Used- Paul O Abbe Ball Mill / Pebble Mill, Carbon Steel. Approximate 26 Gallon Total Volume. Jacket chamber approximate 18" diameter x 24-1/2" long. Driven by a 3hp, 3/220/440 volt motor. Rotary unions. Manhole cover. Mounted on a painted carbon steel frame.
Explore our guides.
Enhance your equipment knowledge with our resources.
August 20, 2026
Guide to Equipment Photography for Faster Sales
Learn equipment photography tips that can help sell used machinery faster, including 360° photos, clean backgrounds, spec tags, lighting, and image quality.
April 7, 2026
Everything You Should Know Before Buying Used Cannabis Equipment
The cannabis industry has been booming, and with this growth comes the need for efficient and cost-effective manufacturing solutions.
April 7, 2026
Everything You Should Know Before Buying A Used Stainless Steel Tank
What do you need to know before buying a stainless-steel tank?
Sell Equipment
Have surplus equipment? We offer flexible options including direct purchase, consignment, or listing on our marketplace — all backed by trusted professionals.
Buy Used Equipment
Discover one of the world’s largest inventories of used processing and packaging equipment — ready to ship and backed by decades of industry expertise.
Auctions
Join global buyers and sellers at AIS-hosted auctions featuring top-quality surplus equipment from leading facilities around the world.