CALL 630-350-2200
View All Equipment Auctions OEM & New Equipment
Appraisals Equipment Reconditioning Asset Management Plant Liquidation Financing Centrifuge Parts & Services
Company Overview Meet Our Team Locations & Contact

Explore our extensive equipment marketplace

Discover a wide range of used processing and packaging machinery tailored to meet your industry needs. Use our advanced search features to find the perfect equipment quickly and efficiently.

Recently added products

Clear
https://images.aaronequipment.com/ItemImages/Centrifuges/Decanter/Sharples-P-3000_53204001_aa.jpg
View

Stock No.:

53204001

Sharples Decanter Centrifuge, Model P-3000 Decanter.

Used- Sharples Decanter Centrifuge, Model P-3000 Decanter. Stainless steel. Reportedly, refurbished with VFD control panel. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Sharples

https://images.aaronequipment.com/ItemImages/Centrifuges/Tricanter/Flottweg-Z23-4-441_53228002_aa.jpg
View

Stock No.:

53228002

Flottweg Separation Technology Z23-4/441 Solid Bowl Tricanter Centrifuge

Used- Flottweg Separation Technology Z23-4/441 Solid Bowl Tricanter Centrifuge. 316 Stainless steel construction (product contact areas). Maximum bowl speed 5500 rpm, three phase separation (liquid/liquid/solids separation), conveyor. 360-degree discharge with wear liners, base, casing, feed pipe, 11 KW-13KW, 3/50-60/400-volt motor, Back drive system, grease lubrication pump, Frame mounted. Flottweg control panel. Previously used in an alcohol fermentation plant. Serial# 002.189.14. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Flottweg

https://images.aaronequipment.com/ItemImages/Dryers-Drying-Equipment/Rotary-Vacuum-Dryers/Krauss-Maffei-TMT-025-160_53147038_be.jpg
View

Stock No.:

53147038

Used Krauss Maffei Conical Dryer Model TMD 0.25/160 – Stainless Steel 316Ti, ATEX

Used Krauss Maffei Conical Dryer, Model TMD 0.25/160 "Titus-Mixer-Dryer," constructed from stainless steel 1.4571 (316Ti). This unit features a working pressure of 3 Bar (43.5 PSI) (vacuum possible), jacket working pressure of 6 Bar (87 PSI), and a capacity of 380 Liters (useful capacity 250 Liters). The cone measures 1016mm (40") in diameter and 1066mm (42") in height, with a dished top and a jacketed mixing screw (6 Liters). Powered by a 4.0 kW + 1.5 kW motor, 380 Volt (explosion-proof), and a jacket volume of 96 Liters. It operates at a maximum temperature of 165C and has a 150mm (6") bottom outlet. Manufactured in 1995, the dryer is mounted on a frame, includes switchgear, and is ATEX compatible. Dimensions are 2.0m x 2.0m (6.6' x 6.6') with a total height of 3.5m (11.5'), weighing 2650 KG. Serial Number 7005/742904/3.

MFR: Krauss Maffei

https://images.aaronequipment.com/ItemImages/Reactors/Carbon-Steel-and-Alloy-Reactors/Northland_53147012_aa.jpg
View

Stock No.:

53147012

Used Northland Stainless 100-Liter Inconel I-622 Reactor – 45 PSI MAWP – Agitated – Mobile on Casters

Used- Northland Stainless, Inc., 250 liter (65 Gallon), Reactor. Constructed of I-622 Alloy, Rated for a maximum allowable working pressure (MAWP) of 45 PSI/Full Vacuum at 350 degrees Fahrenheit. Jacket rated for 125 PSI at 350 degrees Fahrenheit. Multiple top inlets, clamps and probes, dished bottom. Forklift ready, mobile on casters. National Board number 3296. Serial number 0215631-1. Manufactured 2003. Includes Lightnin agitator with control panel. Previously used in biotech operation

MFR: Northland

https://images.aaronequipment.com/ItemImages/Meat-Equipment/Meat-Equipment/FP100_53146001_aa.jpg
View

Stock No.:

53146001

Used Maja FP100 Meat Slicer – 19 kW Stainless Steel | 130 Slices/Min | 600 mm Max Cut

Used- Maja Meat Slicer, Model FP100. Stainless steel. Cuts 40-130 slices per minute. The maximum cutting thickness is 23.4" (600 mm). Driven by a 19 KW-400Volt/50Cycle/3PH Motor. Overall dimensions 67" (2060 mm) long x 45" (1380 mm) width x 61" (1850 mm) high. Weight 1.5 tonnes. Serial # 45585. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

https://images.aaronequipment.com/ItemImages/Filters/Filter-Press/Siemens-Allis-1500N32-64_53125005_aa.jpg
View

Stock No.:

53125005

Used Evoqua/Siemens 1500mm Filter Press – Heavy-Duty Industrial Filtration

Used- Evoqua/Siemens Model 1500N32-64/90-125/175SYLC Automatic Filter Press. Features (65) 1500 mm x 1500 mm (approximately 60" x 60") sidebar suspended filter plates with automatic plate mover/plate shifter for reduced manual handling. Equipped with Siemens PLC-based controls and CNC-style automation for automated cycle control. Heavy-duty construction with an approximate structural weight of 52,000 lbs. Manufactured in 2008. Suitable for municipal and industrial sludge dewatering, mining and mineral slurry dewatering, chemical and specialty chemical filtration, food and beverage process and by-product filtration, and pulp and paper slurry and wastewater treatment. Designed for high-capacity solid/liquid separation in demanding industrial applications.

MFR: Siemens Allis

https://images.aaronequipment.com/ItemImages/Generators/Miscellaneous-Generators/53126014_aa.jpg
View

Stock No.:

53126014

OG-375 oxygen concentrator

Used- OG-375 oxygen concentrator Industrial design uses steel zeolite towers and rebuildable solenoid valves for a easy to maintain system that will never wear out or become obsolete. Features Produces 375 SCFH oxygen at up to 45 PSI Industrial heavy-duty design and quality oxygen concentrator Energy efficient oxygen concentrators require less compressed air for operation High oxygen outlet pressure 45 PSI standard, up to 65 PSI outlet pressure available Completely rebuild-able and easy to maintain design will offer many years of operation More Information Weight 1.35 lbs (0.61 kg) Dimensions 30" x 36" x 84" (76.2 x 91.4 x 213.4 cm) LxWxH Warranty 1 Year Max Pressure 45 PSI (3.16 Bar) Higher pressure systems available Oxygen Connection 3/8-inch NPT Inlet/Outlet Connections 3/8-inch NPT Integrated Compressor No 68 CFM @ 90 PSI required Oxygen Flow Rate 176.98 LPM (375 SCFH) The OG-375 will require an air tank and an oxygen tank for proper operation.

https://images.aaronequipment.com/ItemImages/Filters/Filter-Press/MMF-39-60-SS_53126015_aa.jpeg
View

Stock No.:

53126015

Used Clearstream MMF-39-60-SS Indexing Media Filter – 100 USGPM, 304 Stainless Steel

Used- Clearstream MMF-39-60-SS Indexing Media Filter, 100 USGPM @ 5 Micron, 11ga, 304 SS construction, Aluminum seal wheels, SS drive shaft, UHMW sprockets float sensor and customized electronic control panel for auto media indexing,110v, 60hz, 1/2hp motor, 76" x 60" x 24" and Indexing Filter Tank 304 Stainless 48"x72"x24"

https://images.aaronequipment.com/ItemImages/Dryers-Drying-Equipment/Rotary-Kiln-Direct-Fire/53134001_aa.jpg
View

Stock No.:

53134001

Refractory Engineering Calciner/Kiln

Used- Refractory Engineering Calciner/Kiln, Material of construction A3, 304SS, 321SS on product contact and exhaust parts. 11 working sections 1885 mm length each, total 20735 mm long. Max temp 1000 deg C. (1832 deg F). Max working temp. 950 dec C (1742 deg F.). Natural gas operated by 32 burners. Incl. Fans, piping, pumps, sensors, valves, and additional infrastructure (1) loading table 1600 mm (52") x 1800 mm (59") with rubber covered steel rolls, (1) unloading table 1600 mm (52") x 1800 mm (59"), (1) Plate recycling line. Built 2016.

https://images.aaronequipment.com/ItemImages/Dryers-Drying-Equipment/Multipass/Heil_53136001_aa.jpg
View

Stock No.:

53136001

Used Wood Chip Dryer Separation System – Heil Triple Pass Drum Dryer, 8 TPH

Used- Wood Chip Dryer Separation System. Approximate 8 tons/hour production of dry material at 50% inlet moisture. Consists of: Heil Triple Pass Drum Dryer, 10.5 X 32; 24,000,000 BTU Jackson Webb burner; 200HP motor; (2) Dust collectors; Screw conveyor; Belt Conveyor. Previously used for wood chips. Was set up but never went into operation.

MFR: Heil

https://images.aaronequipment.com/ItemImages/Dryers-Drying-Equipment/Multipass/53136002_aa.jpg
View

Stock No.:

53136002

Used Complete Stainless Steel Drying System with Dual 13' x 60' AEROGLIDE Triple-Pass Rotary Drum Dryers

Used- Complete Stainless Steel Drying System. Based on dual 13' X 60' AEROGLIDE triple-pass rotary drum dryers with trunnion and drives with motors. Including 70 million btu natural gas burners, max thermal output of 42.200.000 kj/h. Discharge cyclone, multi-clones, fans with motors, stack, all relating ducting and steel structure. These dryers are fired with natural gas or propane. Main cyclone at discharge of dryer has 3.66m diameter, secondary multicyclones (8/dryer) are 1.07m diameter each, stack is 37m above grade, Volumetric airflow rated 30.68 cubic meter/second.

https://images.aaronequipment.com/ItemImages/Dryers-Drying-Equipment/Belt-Dryers/SQ16_53137001_aa.jpg
View

Stock No.:

53137001

Used Brock SQ16 Grain Dryer – 326 Bushel Capacity | 15 HP Fan | Auger & Chain Unload | 27'2" Length

Used- Brock Grain Systems Grain Dryer, Model SQ16, 326 bushel capacity. 15 HP fan, 3HP auger load, 2HP Chain unload. 16'4" column length. 27'2" overall length. 14'2 overall height. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

Recently reduced items

https://images.aaronequipment.com/ItemImages/Mixers/Paddle-Mixer/Paul-O-Abbe_52919007_aa.jpeg
Submit Offer $5,190 View

Stock No.:

52919007

Used Paul O Abbe Stainless Steel Fluidizer – 0.7 Cu Ft for Sale

Used- Paul O Abbe Fluidizer, Stainless Steel. Approximate 0.7 cubic feet, 20 liter. Non jacketed trough, 16" wide x 18-1/2" long x 18-1/2" deep. (2) 1-1/2" diameter x 15" long shafts, each have (14) 3" long x 3" wide x 1/8" thick paddles on 1/2" diameter posts. Driven by (2) .33hp, 3/60/230/460 volt, 1700rpm motors, through a reducer 8:1. Bottom bombay doors. 9-1/2" Diameter bottom discharge, 20" discharge height. Includes mounted control panel. Mounted on (4) casters. Serial# A45254.

MFR: Paul O Abbe

https://images.aaronequipment.com/ItemImages/Mills/Hammer-Mill/Quadro-196_50647001_aa.jpg
View

Stock No.:

50647001

Used - Quadro Comil Model 196, 304/316 Stainless Steel, 8,000 Lbs/Hr Capacity, 10 HP

Used- Quadro Comil, Model 196, 304 Stainless Steel. Approximate capacity up to 8,000 pounds an hour. 8" diameter top feed, 12" diameter bottom discharge. 12' dia x 12' dia housing. Requires (missing) impeller and impeller hardware. Housing 304 stainless steel, shaft and discharge chute 316 stainless steel. Driven by a 10 hp, 3/60/208-230/460 Volt, 1750 rpm motor. Serial# 0387.

MFR: Quadro

https://images.aaronequipment.com/ItemImages/Dryers-Drying-Equipment/Rotary-Hot-Air/Summerlot_52919005_aa.jpeg
View

Stock No.:

52919005

Used Summerlot Engineered Products Dryer – 316 Stainless Steel

Used- Summerlot Engineered Products Dryer, 316 Stainless Steel. Cantilevered S/C. 12" long x 6" wide feed hopper, with a 3-3/4" diameter x 48" long screw, 3/4" pitch. Driven by a 1hp, 3/60/208-230/460 volt, 1755 rpm motor. Approximately 10" diameter x 136" long dryer vessel, with (4) fixed baffles. Driven by a 2hp, 3/60/230/460 volt, 1140 rpm motor through reducer, 5.76:1. Approximate 8" diameter discharge with a Flowseal valve. 36" Discharge height. Serial# 88211.

MFR: Summerlot

https://images.aaronequipment.com/ItemImages/Tanks/Stainless-1000-4999-Gal/Criveller_52555001_ac.jpeg
Submit Offer $4,500 View

Stock No.:

52555001

Criveller Ganimede 5.5 Ton Capacity, 1,200 Gallon Wine Fermentation Tank

Used- Criveller Ganimede Wine Fermentation Tank, 5.5 Ton Capacity, 1,200 Gallon, 304 Stainless Steel, Vertical. Approximate 68" diameter x 106" straight side. Coned top and bottom. Internal funneled diaphragm cone, (2) 2" side bypass stations. Approximate 40" wide section top dimple jacket. Openings top: 15.75" manway, side: 17" x 12" manway. (5) 2" side openings, 3" Center bottom outlet with valve, approximate 14" discharge height. Mounted on (4) stainless steel legs. Serial# 791-1. Reported new never installed. Approx. overall height is 15'2". ***The tank is made entirely of stainless steel, and the outer shell has been painted***

MFR: Criveller

Explore our guides.

Enhance your equipment knowledge with our resources.

August 20, 2026

Guide to Equipment Photography for Faster Sales

Learn equipment photography tips that can help sell used machinery faster, including 360° photos, clean backgrounds, spec tags, lighting, and image quality.

Blog Used Equipment

April 7, 2026

Everything You Should Know Before Buying Used Cannabis Equipment

The cannabis industry has been booming, and with this growth comes the need for efficient and cost-effective manufacturing solutions.

Cannabis Industry Blog

April 7, 2026

Everything You Should Know Before Buying A Used Stainless Steel Tank

What do you need to know before buying a stainless-steel tank?

Tanks Blog

Sell Equipment

Have surplus equipment? We offer flexible options including direct purchase, consignment, or listing on our marketplace — all backed by trusted professionals.

Learn about selling

Buy Used Equipment

Discover one of the world’s largest inventories of used processing and packaging equipment — ready to ship and backed by decades of industry expertise.

Browse all equipment

Auctions

Join global buyers and sellers at AIS-hosted auctions featuring top-quality surplus equipment from leading facilities around the world.

View current auctions