CALL 630-350-2200
View All Equipment Auctions OEM & New Equipment
Appraisals Equipment Reconditioning Asset Management Plant Liquidation Financing Centrifuge Parts & Services
Company Overview Meet Our Team Locations & Contact

Explore our extensive equipment marketplace

Discover a wide range of used processing and packaging machinery tailored to meet your industry needs. Use our advanced search features to find the perfect equipment quickly and efficiently.

Recently added products

Clear
https://images.aaronequipment.com/ItemImages/Cooling-Towers/Cooling-Towers/Evapco-ECO-ATWB-24-4N20_53642001_aa.jpg
View

Stock No.:

53642001

(8) Evapco Eco-ATWB 24-4N20 Closed Circuit Cooling Towers. Approximately 600 ton

Used- Lot of (8) Evapco Eco-ATWB 24-4N20 Closed Circuit Cooling Towers. Approximately 600 ton each. Each approximate 2,800 GPM. (2) 40hp fans, approximate 281,190 CFM. Coil volume 5,107 liters (1349 gallon). (2) 40HP fans. Setup as (2) cell units. Seller would like to sell all 8 units at one time, however, will accept offers. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Evapco

https://images.aaronequipment.com/ItemImages/Cooling-Towers/Cooling-Towers/Tower-Tech-TTXL-06197_54219002_aa.jpeg
View

Stock No.:

54219002

Tower Tech TTXL-061975 FRP Cooling Tower – Open Circuit, Direct Drive, 1800 GPM

Tower Tech Cooling Tower, Model TTXL-061975, Open Circuit Design / Modular fiberglass cooling tower rated for approximately 600 tons of cooling capacity. It features a fiberglass reinforced plastic (FRP) casing and basin, PVC fill media, and drift eliminators. Unit has direct-drive axial fans with a hot-water spray distribution system. Typical operating conditions are 95F inlet water, 85F outlet water, and 78F wet-bulb ambient, with a flow rate of about 1,800 GPM. The tower has removable louvers, access panels, stainless steel hardware. Serial# 2008031-02. Built 2008.

MFR: Tower Tech

https://images.aaronequipment.com/ItemImages/Kettles/Stainless-Steel-500-999-Gallon/Lee-Ind-Trimix-Turboshear-600D12T_11690025_aa.jpg
View

Stock No.:

11690025

Used Lee Trimix Turboshear 600 Gallon Jacketed Mixing Kettle – Triple Motion Scraper & Homogenizer System

Used- Lee 600 Gallon Triple Motion Scraper and Homogenizer Jacketed Mixing Kettle, Model Trimix Turboshear 600D12T. 316 SS contact parts. Double motion Counter-Rotating anchor scraper agitation driven by a 15 HP (3/60/230-460V) motor. High speed homogenizer driven by a 40/20 HP 2 speed motor (3/60/460V). Jacketed for 90 PSI maximum pressure at 332 degrees F. Includes center bottom outlet with 3" Lee flush mount ball valve and tilt out bridge to access agitation/kettle. Includes control panel with push button operator controls. Serial# B7488A2.

MFR: Lee Ind

https://images.aaronequipment.com/ItemImages/Kettles/Stainless-Steel-500-999-Gallon/APV-Crepaco_53023001_aa.jpg
View

Stock No.:

53023001

Pre-Owned APV Crepaco 600-Gallon Vertical Kettle – 304 Stainless Steel

Used- APV Crepaco Stainless Steel Jacketed Kettle, Approximate 600 Gallon, 304 Stainless Steel, Vertical. Approximate 66" diameter x 35" straight side. Dished top, cone bottom. Jacket rated for 315 degrees at 75 PSI, refrigerant side jacket rated for 100 degrees at 150 PSI. Vessel rated for 15 PSI. Opening top: 18" manhole. Removable top entering baffle. Serial# 20173, National Board# 2492-DUPL.

MFR: APV/Crepaco

https://images.aaronequipment.com/ItemImages/Compressors/Air-Rotary/WRVI321165_53267150_aa.jpg
View

Stock No.:

53267150

Used Howden WRVI321165 Rotary Screw Compressor – 600 HP Industrial Gas Compression System

Used Howden WRVI321165 Rotary Screw Compressor 600 HP Industrial Gas Compression System. S/N MK6BS-795 Rated Max working pressure outlet 24.0 bar, Max working pressure inlet 7.0 bar. Max Speed 3600 RPM. Driven by Hyundai 600 HP 3/60/2300-4160 volt motor 3579 RPM. Built 2011.

https://images.aaronequipment.com/ItemImages/Compressors/Air-Rotary/WRVI321165_53267159_aa.jpg
View

Stock No.:

53267159

Howden WRVI321165 High-Capacity Rotary Screw Compressor with 600 HP Hyundai Drive Motor

Howden WRVI321165 High-Capacity Rotary Screw Compressor with 600 HP Hyundai Drive Motor. S/N MK6BS-795 Rated Max working pressure outlet 24.0 bar, Max working pressure inlet 7.0 bar. Max Speed 3600 RPM. Driven by Hyundai 600 HP 3/60/2300-4160 volt motor 3579 RPM. Built 2011.

https://images.aaronequipment.com/ItemImages/Mills/Hammer-Mill/Schutte-AHM-20_50823014_aa.jpg
View

Stock No.:

50823014

Used - Schutte-Buffalo-Astec Hammermill, Model AHM-20, 600 HP, Carbon Steel

Used- Schutte-Buffalo-Astec Hammermill, Model AHM-20, Carbon Steel. Approximate (2) 48" diameter x 24" wide rotors. 2-3/4"w x 4"L x 5/16" thick swinging hammers, approximately 7 rows of (14 hammers) 2 sections, 3/16" screen. 15"W x 60" Long Top feed with hopper, 60-1/2"L x 11"T bottom discharge. Driven by a 600 HP, 3/60/460 volt, 1790 rpm motor. Mounted on a frame. Includes a Twin City blower, Type RBR-SW, size 926, driven by a 200 HP, 3/60/230/460 volt, 1785 rpm motor.

MFR: Schutte

https://images.aaronequipment.com/ItemImages/Mills/Hammer-Mill/Schutte-AHM-20_50823042_aa.jpg
View

Stock No.:

50823042

Used - Schutte-Buffalo-Astec AHM-20 Hammermill, 600 HP, Twin Rotor, Carbon Steel

Used- Schutte-Buffalo-Astec Model AHM-20 Hammermill, Carbon Steel. Approximate (2) 48" diameter x 24" wide rotors. 2-3/4"w x 4"L x 5/16" thick swinging hammers, approx 7 rows of (14 hammers) 2 sections, 3/16" screen. 15"W x 60" Long Top feed with hopper, 60-1/2"L x 11"T bottom discharge. Driven by a 600 HP, 3/60/460 volt, 1790 rpm motor. Mounted on a frame. Includes a Twin City blower, Type RBR-SW, size 926, driven by a 200 HP, 3/60/230/460 volt, 1785 rpm motor. Astec Serial # 16-085-299260-22-1.

MFR: Schutte

https://images.aaronequipment.com/ItemImages/Mills/Hammer-Mill/Schutte-AHM-20_50823043_aa.jpg
View

Stock No.:

50823043

Heavy-Duty Schutte-Buffalo Hammermill, Model AHM-20, 600 HP, Twin Rotor

Used- Schutte-Buffalo-Astec Carbon Steel Hammermill, Model AHM-20. Approximate (2) 48" diameter x 24" wide rotors. 2-3/4" wide x 4" long x 5/16" thick swinging hammers, approximate 7 rows of (14 hammers) 2 sections, 3/16" screen. 15" wide x 60" long Top feed with hopper, 60-1/2" long x 11" tall bottom discharge. Driven by a 600 HP, 3/60/460 volt, 1790 rpm motor. Mounted on a frame. Includes a Twin City blower, Type RBR-SW, size 926, driven by a 200 hp, 3/60/230/460 volt, 1785 rpm motor. Astec Serial # 16-086-299260-22-1.

MFR: Schutte

https://images.aaronequipment.com/ItemImages/Generators/Diesel-Fuel-and-Natural-Gas-Fuel/MTU-Onsite-Energy-DS600D_49317033_aa.jpg
View

Stock No.:

49317033

Used MTU 600 kW Standby (550 kW prime) Diesel Generator Set - Model DS600

Used- MTU 600 kW Standby (550 kW prime) Diesel Generator Set, Model DS600, SN-321178-1-1-0510. MTU 12V1600G80S engine rated 896 HP at 1800 RPM, SN-16701001344, EPA Tier 2 emissions. 3/60/120/208V, 12 lead reconnectable to other voltages. 2000 Amp adjustable main-line circuit breaker. PMG permanent magnet generator. Engine cooling radiator rated 50C/122F ambient. UL listed stationary engine generator assembly. Basler DGC-2020 digital control panel. Battery charger. Coolant heater. Weather enclosure. 1000 gallon sub-base fuel tank with secondary containment. 293 Hrs. Year 2010. 86W x 170L x 144H, 20,000 lbs. Passed load test 6/11/2024.

MFR: MTU Onsite Energy

https://images.aaronequipment.com/ItemImages/Reactors/Stainless-Steel-5000-Gallon-and-up/Tolan-6000-gallon_54480003_aa.jpg
View

Stock No.:

54480003

Unused Tolan Machinery 6,000 Gallon 316L Stainless Steel Reactor | Heavy Duty Jacketed Pressure Vessel

Unused Tolan Machinery 6,000 Gallon 316L Stainless Steel Reactor | Heavy Duty Jacketed Pressure Vessel. Half-pipe jacket on the shell and bottom head, rated at FV/150 PSI @ 350 degrees F. Internal vessel is rated at FV/60 PSI @ 350 degrees F. 120" overall diameter x 122" height. 316L Stainless Steel (Wetted), 304L Stainless Steel (Non Wetted) MOC. Mill finish internal and external polish. 24" top manway. 12" Agitator Nozzle. (4) internal baffles. (4) leg mounts. NB certified. Serial# 9512. Built 2024.

MFR: Tolan

https://images.aaronequipment.com/ItemImages/Reactors/Stainless-Steel-5000-Gallon-and-up/Tolan-6000-gallon_54480004_aa.jpg
View

Stock No.:

54480004

Unused 6,000 Gallon 316L Stainless Steel Jacketed Reactor | Tolan Heavy-Duty Process Vessel

Unused 6,000 Gallon 316L Stainless Steel Jacketed Reactor | Tolan Heavy-Duty Process Vessel. Half-pipe jacket on the shell and bottom head, rated at FV/150 PSI @ 350 degrees F. Internal vessel is rated at FV/60 PSI @ 350 degrees F. 120" overall diameter x 122" height. 316L Stainless Steel (Wetted), 304L Stainless Steel (Non Wetted) MOC. Mill finish internal and external polish. 24" top manway. 12" Agitator Nozzle. (4) internal baffles. (4) leg mounts. NB certified. Serial# 9513. Built 2024.

MFR: Tolan

Recently reduced items

https://images.aaronequipment.com/ItemImages/Mixers/Paddle-Mixer/Paul-O-Abbe_52919007_aa.jpeg
Submit Offer $5,190 View

Stock No.:

52919007

Used Paul O Abbe Stainless Steel Fluidizer – 0.7 Cu Ft for Sale

Used- Paul O Abbe Fluidizer, Stainless Steel. Approximate 0.7 cubic feet, 20 liter. Non jacketed trough, 16" wide x 18-1/2" long x 18-1/2" deep. (2) 1-1/2" diameter x 15" long shafts, each have (14) 3" long x 3" wide x 1/8" thick paddles on 1/2" diameter posts. Driven by (2) .33hp, 3/60/230/460 volt, 1700rpm motors, through a reducer 8:1. Bottom bombay doors. 9-1/2" Diameter bottom discharge, 20" discharge height. Includes mounted control panel. Mounted on (4) casters. Serial# A45254.

MFR: Paul O Abbe

https://images.aaronequipment.com/ItemImages/Dryers-Drying-Equipment/Rotary-Hot-Air/Summerlot_52919005_aa.jpg
View

Stock No.:

52919005

Used Summerlot Engineered Products Dryer – 316 Stainless Steel

Used- Summerlot Engineered Products Dryer, 316 Stainless Steel. Cantilevered S/C. 12" long x 6" wide feed hopper, with a 3-3/4" diameter x 48" long screw, 3/4" pitch. Driven by a 1hp, 3/60/208-230/460 volt, 1755 rpm motor. Approximately 10" diameter x 136" long dryer vessel, with (4) fixed baffles. Driven by a 2hp, 3/60/230/460 volt, 1140 rpm motor through reducer, 5.76:1. Approximate 8" diameter discharge with a Flowseal valve. 36" Discharge height. Serial# 88211.

MFR: Summerlot

https://images.aaronequipment.com/ItemImages/Dryers-Drying-Equipment/Oven/PB-1542_50028005_aa.jpg
View

Stock No.:

50028005

Unused JBT Foodtech FORMCOOK Progrill Contact Cooker – Model PB-1542 Electric ProBake

Unused- JBT Foodtech FORMCOOK Progrill Contact Cooker. Model PB-1542 Electric ProBake. With 10 Degree Incline and Top Belt. Overall Belt Width 60". Usable Belt Width 59", Cooking Length 13.78'. Seven Lower Electric Platens, Upper and Lower Teflon Style Belting. Electrical Specifications 460/3/60 (110/1/60), Electric Drive, Basic Belt Cleaning System, Digital Read-out System, 12" Out-feed Conveyor, Standard Exhaust Fan. Controllogix Processor disconnects on all motors. HMI Screen A. Platens 3/60/460 / 1/60/110 Electric Drive.

https://images.aaronequipment.com/ItemImages/Mills/Pebble-Mill/52038001_aa.jpg
Submit Offer $2,500 View

Stock No.:

52038001

Used - Paul O Abbe Ball Mill / Pebble Mill, Carbon Steel, 26 Gallon

Used- Paul O Abbe Ball Mill / Pebble Mill, Carbon Steel. Approximate 26 Gallon Total Volume. Jacket chamber approximate 18" diameter x 24-1/2" long. Driven by a 3hp, 3/220/440 volt motor. Rotary unions. Manhole cover. Mounted on a painted carbon steel frame.

Explore our guides.

Enhance your equipment knowledge with our resources.

August 20, 2026

Guide to Equipment Photography for Faster Sales

Learn equipment photography tips that can help sell used machinery faster, including 360° photos, clean backgrounds, spec tags, lighting, and image quality.

Blog Used Equipment

April 7, 2026

Everything You Should Know Before Buying Used Cannabis Equipment

The cannabis industry has been booming, and with this growth comes the need for efficient and cost-effective manufacturing solutions.

Cannabis Industry Blog

April 7, 2026

Everything You Should Know Before Buying A Used Stainless Steel Tank

What do you need to know before buying a stainless-steel tank?

Tanks Blog

Sell Equipment

Have surplus equipment? We offer flexible options including direct purchase, consignment, or listing on our marketplace — all backed by trusted professionals.

Learn about selling

Buy Used Equipment

Discover one of the world’s largest inventories of used processing and packaging equipment — ready to ship and backed by decades of industry expertise.

Browse all equipment

Auctions

Join global buyers and sellers at AIS-hosted auctions featuring top-quality surplus equipment from leading facilities around the world.

View current auctions