CALL 630-350-2200
View All Equipment Auctions OEM & New Equipment
Appraisals Equipment Reconditioning Asset Management Plant Liquidation Financing Centrifuge Parts & Services
Company Overview Meet Our Team Locations & Contact

Explore our extensive equipment marketplace

Discover a wide range of used processing and packaging machinery tailored to meet your industry needs. Use our advanced search features to find the perfect equipment quickly and efficiently.

Recently added products

Clear
https://images.aaronequipment.com/ItemImages/Tanks/Stainless-1000-4999-Gal/11252200_aa.jpg
View

Stock No.:

11252200

Used Stainless Steel Single Wall 2,400 Gallon Storage Tank

Used- 304 Stainless Steel Single Wall 2,400 Gallon Storage Tank, measures 69" diameter X 168" high. Includes side bottom manway with bottom outlet.

https://images.aaronequipment.com/ItemImages/Mills/Colloid-Mill/Fryma-MZ-130-B_11059368_aa.jpg
View

Stock No.:

11059368

Used Fryma Koruma MZ-130/B Toothed Colloid Mill | 25 HP | 700–7000 L/hr | Sanitary | High Shear Mixer

Used- Fryma Koruma Toothed Colloid Mill, Model MZ-130/B, dispersing and homogenizing liquid to highly viscous materials. Capacity range approx.: 700 - 7,000 L/hr. Product fineness approx.: 100 - 500um. 18.5 kw (25 HP), 3 phase, 60 cycle, 208 volts on portable cart with control panel. High Shear Mixer. Last used in sanitary Pharmaceutical plant.

MFR: Fryma

https://images.aaronequipment.com/ItemImages/Centrifuges/Decanter/Sharples-PM-70000_10151369_aa.jpg
View

Stock No.:

10151369

Used Alfa Laval / Sharples PM-70000 Super-D-Canter Solid bowl Decanter Centrifuge

Used- Alfa Laval / Sharples PM-70000 Super-D-Canter Solid bowl Decanter Centrifuge, (same size as a P-5400), stainless steel construction (product contact areas). 5" single lead conveyor, base, casing, gearbox, 200 HP main drive motor, lubrication pump system.

MFR: Sharples

https://images.aaronequipment.com/ItemImages/Mills/Colloid-Mill/SPX-CMP_10128106_aa.jpg
View

Stock No.:

10128106

Used SPX Waukesha CMP Colloid Mill | Stainless Steel High Shear Milling System

Used- SPX Waukesha model CMP stainless steel horizontal colloid mill. Serial number 1000002960246. It has a conical grooved rotor and stator. The inlet and outlet are 2" sanitary threaded. This unit is all mounted on a stainless steel base. The mill is driven by a 25 hp electric motor. 575 vac 3 ph power required.

MFR: SPX

https://images.aaronequipment.com/ItemImages/Mills/Colloid-Mill/Waukesha-MS_10128107_aa.jpg
View

Stock No.:

10128107

Used Waukesha MS Colloid Mill | Stainless Steel High Shear Milling System

Used Waukesha MS Colloid Mill | Stainless Steel High Shear Milling System. Serial number 1000002790489. It has a conical grooved rotor and stator. The inlet and outlet are 2" sanitary threaded. This unit is all mounted on a stainless steel base. The mill is driven by a 25 hp, 3530 rpm electric motor. 460 vac 3 ph power required.

MFR: Waukesha

https://images.aaronequipment.com/ItemImages/Filters/Filter-Press/Hoffland_13147003_aa.jpg
View

Stock No.:

13147003

Used Hoffland 25 Cu Ft Air/Hydraulic Filter Press | 50 Plate 800mm Dewatering System

Used- Hoffland Air/Hydraulic Filter Press, 25 Cubic Foot. (50) 800mm plates. Gasketed. CPVC Flanged Outlets. 169" Between Legs. OAD: 221"L x 42"W x 66"H.

MFR: Hoffland

https://images.aaronequipment.com/ItemImages/Blowers/Blowers/BISW-365-79-CL2-B-360-CW_51905002_aa.jpg
View

Stock No.:

51905002

25 HP Industrial Blower by IATC – 18,000 CFM, Model BISW 365-79 CL2/B

Used- Industrial Air Technology Corp. Blower, Model BISW 365-79 CL2/B 360 CW. 18000 CFM, Serial # 60531-A. Driven by a 25 HP, 3/60/208-230/480V, 1180 RPM motor.

https://images.aaronequipment.com/ItemImages/Presses/Hydraulic-Press/Carver-38871SD0A06_51708008_aa.jpg
Submit Offer $5,500 View

Stock No.:

51708008

Carver AutoPellet Press - 25 Ton Force, 5” Diameter Platen, 13MM Die

Used- Carver AutoPellet Press, Model 3887.1SD0A06. 25 Ton maximum clamp force. 5" Diameter platen. 13MM Die. Ram stroke 1". Daylight opening 1.5 to 7.25". Mounted on a base. Serial# 110497, Built 2011.

MFR: Carver

https://images.aaronequipment.com/ItemImages/Centrifuges/Decanter/Alfa-Laval-NX-6541_49662009_aa.jpg
View

Stock No.:

49662009

Used Alfa Laval NX-6541 "SanX" Solid Bowl Decanter Centrifuge – Built 2020

Used- Alfa Laval NX-6541 "Sanx" solid bowl decanter centrifuge, SanX model, stainless steel construction (product contact areas), max bowl speed 3100 rpm. 25" diameter x 98.75" long bowl. 360 degree solid discharge ports, 9" single lead conveyor , base, casing, gearbox 127/1 ratio, 75 hp main drive motor, 30 hp backdrive motor, control (460/3/60). Built 2020

MFR: Alfa Laval

https://images.aaronequipment.com/ItemImages/Tanks/Stainless-0-499-Gal/Roark-Enterprises_50467054_aa.jpg
Submit Offer $2,500 View

Stock No.:

50467054

Used Roark Enterprises 25-Gallon Stainless Steel Receiver Tank – 150 PSI, Vacuum Rated

Used- Roark Enterprises 25 Gallon Receiver Tank, Stainless Steel Construction. Approximately 16" diameter x 32" straight side, dish top and bottom. Internal rated 150 psi and full vacuum at 150 degrees F. Serial# 95.709.ME1, National Board# 460.

MFR: Roark Enterprises

https://images.aaronequipment.com/ItemImages/Mills/FitzMill/Fitzpatrick-DKAS012_50366004_aa.jpg
View

Stock No.:

50366004

Used Fitzpatrick FitzMill DKAS012 Stainless Steel Hammer Mill – 25 HP Pharmaceutical & Food Grade Mill

Used Fitzpatrick FitzMill DKAS012 Stainless Steel Hammer Mill 25 HP Pharmaceutical & Food Grade Mill. Chamber: 12.5" wide x 15.37" long, with center screen support bar, screens not included. 32 milling blades, fixed blunt flat-edge/knife edge, reversible. 10" flange inlet. 16" x 19" oval discharge with banding groove, 75.5" above base elevation. Driven by a 25 HP, 3/60/230/460 Volt, 1770 RPM motor. Welded stainless steel portable base frame (4" box tubing), 42"W X 48"L. Serial# 9084.

MFR: Fitzpatrick

https://images.aaronequipment.com/ItemImages/Filters/Filter-Press/JWI-800N32-49-_54050001_aa.jpg
View

Stock No.:

54050001

Used JWI 800N32-49-25SYLS Filter Press – 49 Chamber, 528 Sq. Ft., 800mm Plates (

Used- JWI Filter Press, Model 800N32-49-25SYLS. Total chamber volume of 25 ft (0.707 m) across 49 chambers. It features a chamber volume of 0.5 ft (0.01 m) and a total filter area of 528 ft (49 m), using 800 mm square plates with Goretex filter cloth. Approximately (49) polypropylene Plates. The overall length and width of the press are 218.63 inches (5553 mm) and 53.29 inches (1354 mm), respectively. The press uses an air-powered hydraulic pump and requires a maximum air supply of 80 scfm at 100 psi. It is equipped with a 6" bore x 24" stroke (152 mm x 610 mm) hydraulic cylinder, with a maximum hydraulic closing pressure of 4100 psi (283 bar). The system includes a 4.5-gallon (17.0 L) reservoir and uses Rykon All Weather Type-46 hydraulic oil. The feed pump pressure is rated at 100 psi, and the manifold style is air blow with precoating capability. Optional features include an auto pump control system, semi-auto shifter, drum disposal system, and Bombay doors. Serial# F05045. This unit was new in 2017. ** PLATES ARE STORED INSIDE**

MFR: JWI

Recently reduced items

https://images.aaronequipment.com/ItemImages/Mixers/Paddle-Mixer/Paul-O-Abbe_52919007_aa.jpeg
Submit Offer $5,190 View

Stock No.:

52919007

Used Paul O Abbe Stainless Steel Fluidizer – 0.7 Cu Ft for Sale

Used- Paul O Abbe Fluidizer, Stainless Steel. Approximate 0.7 cubic feet, 20 liter. Non jacketed trough, 16" wide x 18-1/2" long x 18-1/2" deep. (2) 1-1/2" diameter x 15" long shafts, each have (14) 3" long x 3" wide x 1/8" thick paddles on 1/2" diameter posts. Driven by (2) .33hp, 3/60/230/460 volt, 1700rpm motors, through a reducer 8:1. Bottom bombay doors. 9-1/2" Diameter bottom discharge, 20" discharge height. Includes mounted control panel. Mounted on (4) casters. Serial# A45254.

MFR: Paul O Abbe

https://images.aaronequipment.com/ItemImages/Dryers-Drying-Equipment/Rotary-Hot-Air/Summerlot_52919005_aa.jpg
View

Stock No.:

52919005

Used Summerlot Engineered Products Dryer – 316 Stainless Steel

Used- Summerlot Engineered Products Dryer, 316 Stainless Steel. Cantilevered S/C. 12" long x 6" wide feed hopper, with a 3-3/4" diameter x 48" long screw, 3/4" pitch. Driven by a 1hp, 3/60/208-230/460 volt, 1755 rpm motor. Approximately 10" diameter x 136" long dryer vessel, with (4) fixed baffles. Driven by a 2hp, 3/60/230/460 volt, 1140 rpm motor through reducer, 5.76:1. Approximate 8" diameter discharge with a Flowseal valve. 36" Discharge height. Serial# 88211.

MFR: Summerlot

https://images.aaronequipment.com/ItemImages/Dryers-Drying-Equipment/Oven/PB-1542_50028005_aa.jpg
View

Stock No.:

50028005

Unused JBT Foodtech FORMCOOK Progrill Contact Cooker – Model PB-1542 Electric ProBake

Unused- JBT Foodtech FORMCOOK Progrill Contact Cooker. Model PB-1542 Electric ProBake. With 10 Degree Incline and Top Belt. Overall Belt Width 60". Usable Belt Width 59", Cooking Length 13.78'. Seven Lower Electric Platens, Upper and Lower Teflon Style Belting. Electrical Specifications 460/3/60 (110/1/60), Electric Drive, Basic Belt Cleaning System, Digital Read-out System, 12" Out-feed Conveyor, Standard Exhaust Fan. Controllogix Processor disconnects on all motors. HMI Screen A. Platens 3/60/460 / 1/60/110 Electric Drive.

https://images.aaronequipment.com/ItemImages/Mills/Pebble-Mill/52038001_aa.jpg
Submit Offer $2,500 View

Stock No.:

52038001

Used - Paul O Abbe Ball Mill / Pebble Mill, Carbon Steel, 26 Gallon

Used- Paul O Abbe Ball Mill / Pebble Mill, Carbon Steel. Approximate 26 Gallon Total Volume. Jacket chamber approximate 18" diameter x 24-1/2" long. Driven by a 3hp, 3/220/440 volt motor. Rotary unions. Manhole cover. Mounted on a painted carbon steel frame.

Explore our guides.

Enhance your equipment knowledge with our resources.

August 20, 2026

Guide to Equipment Photography for Faster Sales

Learn equipment photography tips that can help sell used machinery faster, including 360° photos, clean backgrounds, spec tags, lighting, and image quality.

Blog Used Equipment

April 7, 2026

Everything You Should Know Before Buying Used Cannabis Equipment

The cannabis industry has been booming, and with this growth comes the need for efficient and cost-effective manufacturing solutions.

Cannabis Industry Blog

April 7, 2026

Everything You Should Know Before Buying A Used Stainless Steel Tank

What do you need to know before buying a stainless-steel tank?

Tanks Blog

Sell Equipment

Have surplus equipment? We offer flexible options including direct purchase, consignment, or listing on our marketplace — all backed by trusted professionals.

Learn about selling

Buy Used Equipment

Discover one of the world’s largest inventories of used processing and packaging equipment — ready to ship and backed by decades of industry expertise.

Browse all equipment

Auctions

Join global buyers and sellers at AIS-hosted auctions featuring top-quality surplus equipment from leading facilities around the world.

View current auctions