CALL 630-350-2200
View All Equipment Auctions OEM & New Equipment
Appraisals Equipment Reconditioning Asset Management Plant Liquidation Financing Centrifuge Parts & Services
Company Overview Meet Our Team Locations & Contact

Explore our extensive equipment marketplace

Discover a wide range of used processing and packaging machinery tailored to meet your industry needs. Use our advanced search features to find the perfect equipment quickly and efficiently.

Recently added products

Clear
https://images.aaronequipment.com/ItemImages/Kettles/Stainless-Steel-500-999-Gallon/APV-Crepaco_53023001_aa.jpg
View

Stock No.:

53023001

Pre-Owned APV Crepaco 600-Gallon Vertical Kettle – 304 Stainless Steel

Used- APV Crepaco Stainless Steel Jacketed Kettle, Approximate 600 Gallon, 304 Stainless Steel, Vertical. Approximate 66" diameter x 35" straight side. Dished top, cone bottom. Jacket rated for 315 degrees at 75 PSI, refrigerant side jacket rated for 100 degrees at 150 PSI. Vessel rated for 15 PSI. Opening top: 18" manhole. Removable top entering baffle. Serial# 20173, National Board# 2492-DUPL.

MFR: APV/Crepaco

https://images.aaronequipment.com/ItemImages/Compressors/Air-Rotary/WRVI321165_53267150_aa.jpg
View

Stock No.:

53267150

Used Howden WRVI321165 Rotary Screw Compressor – 600 HP Industrial Gas Compression System

Used Howden WRVI321165 Rotary Screw Compressor 600 HP Industrial Gas Compression System. S/N MK6BS-795 Rated Max working pressure outlet 24.0 bar, Max working pressure inlet 7.0 bar. Max Speed 3600 RPM. Driven by Hyundai 600 HP 3/60/2300-4160 volt motor 3579 RPM. Built 2011.

https://images.aaronequipment.com/ItemImages/Compressors/Air-Rotary/WRVI321165_53267159_aa.jpg
View

Stock No.:

53267159

Howden WRVI321165 High-Capacity Rotary Screw Compressor with 600 HP Hyundai Drive Motor

Howden WRVI321165 High-Capacity Rotary Screw Compressor with 600 HP Hyundai Drive Motor. S/N MK6BS-795 Rated Max working pressure outlet 24.0 bar, Max working pressure inlet 7.0 bar. Max Speed 3600 RPM. Driven by Hyundai 600 HP 3/60/2300-4160 volt motor 3579 RPM. Built 2011.

https://images.aaronequipment.com/ItemImages/Cooling-Towers/Cooling-Towers/Evapco-ECO-ATWB-24-4N20_53642001_aa.jpg
View

Stock No.:

53642001

(8) Evapco Eco-ATWB 24-4N20 Closed Circuit Cooling Towers. Approximately 600 ton

Used- Lot of (8) Evapco Eco-ATWB 24-4N20 Closed Circuit Cooling Towers. Approximately 600 ton each. Each approximate 2,800 GPM. (2) 40hp fans, approximate 281,190 CFM. Coil volume 5,107 liters (1349 gallon). (2) 40HP fans. Setup as (2) cell units. Seller would like to sell all 8 units at one time, however, will accept offers. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Evapco

https://images.aaronequipment.com/ItemImages/Cooling-Towers/Cooling-Towers/Tower-Tech-TTXL-06197_54219002_aa.jpeg
View

Stock No.:

54219002

Tower Tech TTXL-061975 FRP Cooling Tower – Open Circuit, Direct Drive, 1800 GPM

Tower Tech Cooling Tower, Model TTXL-061975, Open Circuit Design / Modular fiberglass cooling tower rated for approximately 600 tons of cooling capacity. It features a fiberglass reinforced plastic (FRP) casing and basin, PVC fill media, and drift eliminators. Unit has direct-drive axial fans with a hot-water spray distribution system. Typical operating conditions are 95F inlet water, 85F outlet water, and 78F wet-bulb ambient, with a flow rate of about 1,800 GPM. The tower has removable louvers, access panels, stainless steel hardware. Serial# 2008031-02. Built 2008.

MFR: Tower Tech

https://images.aaronequipment.com/ItemImages/Reactors/Stainless-Steel-5000-Gallon-and-up/Tolan-6000-gallon_54480003_aa.jpg
View

Stock No.:

54480003

Unused Tolan Machinery 6,000 Gallon 316L Stainless Steel Reactor | Heavy Duty Jacketed Pressure Vessel

Unused Tolan Machinery 6,000 Gallon 316L Stainless Steel Reactor | Heavy Duty Jacketed Pressure Vessel. Half-pipe jacket on the shell and bottom head, rated at FV/150 PSI @ 350 degrees F. Internal vessel is rated at FV/60 PSI @ 350 degrees F. 120" overall diameter x 122" height. 316L Stainless Steel (Wetted), 304L Stainless Steel (Non Wetted) MOC. Mill finish internal and external polish. 24" top manway. 12" Agitator Nozzle. (4) internal baffles. (4) leg mounts. NB certified. Serial# 9512. Built 2024.

MFR: Tolan

https://images.aaronequipment.com/ItemImages/Reactors/Stainless-Steel-5000-Gallon-and-up/Tolan-6000-gallon_54480004_aa.jpg
View

Stock No.:

54480004

Unused 6,000 Gallon 316L Stainless Steel Jacketed Reactor | Tolan Heavy-Duty Process Vessel

Unused 6,000 Gallon 316L Stainless Steel Jacketed Reactor | Tolan Heavy-Duty Process Vessel. Half-pipe jacket on the shell and bottom head, rated at FV/150 PSI @ 350 degrees F. Internal vessel is rated at FV/60 PSI @ 350 degrees F. 120" overall diameter x 122" height. 316L Stainless Steel (Wetted), 304L Stainless Steel (Non Wetted) MOC. Mill finish internal and external polish. 24" top manway. 12" Agitator Nozzle. (4) internal baffles. (4) leg mounts. NB certified. Serial# 9513. Built 2024.

MFR: Tolan

https://images.aaronequipment.com/ItemImages/Reactors/Stainless-Steel-5000-Gallon-and-up/Tolan-6000-gallon_54480005_aa.jpg
View

Stock No.:

54480005

Unused Tolan Machinery 6,000 Gallon 316L Stainless Steel Reactor | #4 Polish Jacketed Process Vessel

Unused Tolan Machinery 6,000 Gallon 316L Stainless Steel Reactor | #4 Polish Jacketed Process Vessel. Half-pipe jacket on the shell and bottom head, rated at FV/150 PSI @ 350 degrees F. Internal vessel is rated at FV/60 PSI @ 350 degrees F. 120" overall diameter x 122" height. 316L Stainless Steel (Wetted), 304L Stainless Steel (Non Wetted) MOC. #4 internal polish, mill finish external polish. 24" top manway. 12" Agitator Nozzle. (4) internal baffles. (4) leg mounts. NB certified. Serial# 9514. Built 2024.

MFR: Tolan

https://images.aaronequipment.com/ItemImages/Plastics-Equipment/Mixing-High-Intensity-Mixers/Prodex-60JSS_52283009_aa.jpg
View

Stock No.:

52283009

Used Prodex / Henschel High-Intensity Mixer – Model 60JSS

Used Prodex / Henschel High-Intensity Mixer Model 60JSS. Carbon steel jacketed bowl with 304 stainless steel Interior. Approximate working capacity 170 Liters or 6 Cubic Feet (Total Capacity: 240 Liters or 8.5 Cubic Feet). Measures 30" diameter x 24" deep with 2-tier blades, 8" side bottom outlet with air actuated discharge and hinged swing-away top cover. Driven by approximately 60/30 HP two-speed motor. (no nameplate on motor). Serial# 72090.

MFR: Prodex

https://images.aaronequipment.com/ItemImages/Evaporators/Wipe-Film-Thin-Film/Buss-SMS-B400_47790_ad.jpg
View

Stock No.:

47790

Used Buss-SMS B400 Evaporator – 316 Stainless Steel, 13' Long, Jacketed for 45 PSI & Vacuum

Used- Buss-SMS Evaporator, Type B400. 13' Long on straight side x 1'6" diameter. 316 Stainless steel construction. Jacketed and rated for 45 psi (3 bar) and vacuum. (1) 1" diameter product, (1) conical 3.5" diameter bottom product outlet. Belt driven but without motor. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Buss-SMS

https://images.aaronequipment.com/ItemImages/Plastics-Equipment/Extruders-Twin-Screw-CoRotate/Leistritz-Corporation-ZSE-60-MAX_52546001_ae.jpeg
View

Stock No.:

52546001

Used Leistritz 60mm ZSE MAXX Twin Screw Extruder – High-Performance Industrial Extruder

Used Leistritz 60mm ZSE MAXX Twin Screw Extruder, Type ZSE60MAXX-20D. (2) Co-rotating screws approximately 2.44" diameter x 62" long. Speed 400 rpm. Approximate 20 to 1 L/D ratio. 4 Barrel sections, 1 feed section. Liquid heated and cooled. 4-Cooling zones. Screws driven by a 121kw (160hp), 1600 rpm motor thru a gearbox. Leistritz model LSB 56 twin screw side feeder, driven by 3.45kW, 3/60/264/460 volt, 1700 rpm gear motor, 5.3 to 1 ratio. Rickmeier pump, driven by a 1.4kW motor, thru Funke plate heat exchanger. Includes drive panel with Siemens Sinamics controller. *No main control panel*. Mounted on frame with wheels and adjustable feet. Serial # 04144, order # 310.1121.01. 3/60/480 Volt, 294 Amp.

MFR: Leistritz Corporation

https://images.aaronequipment.com/ItemImages/Heat-Exchangers/Shell-and-Tube-Stainless/Daekyung-Machinery-and-Engineering-AES-52X288_46379023_aa.jpg
View

Stock No.:

46379023

Unused 6,179 Sq. Ft. Shell & Tube Heat Exchanger with TP405 Stainless Tubes

Unused- 8 Pass Shell & Tube Heat Exchanger, 6,179 Square Feet, Horizontal. Carbon steel shell rated 425 psi/ full vacuum at -20 to 650 degrees F. (1,008) 1" Diameter x 24' long TP405 stainless steel tubes rated 500 psi/ full vacuum at -20 to 650 degrees F. Carbon steel heads. Openings: shell (2) 16", tubes (2) 10". Saddle mounted. Mfg. Daekyung Machinery & Engineering. Serial# DK2007-090B, National Board# 2418. Built 2008. Dimensions 386"L X 82"W X 103"T. Weight 70,300 lbs. Documents available. Nitrogen purged by manufacturer after testing and prior to storage.

MFR: Daekyung Machinery & Engineering

Recently reduced items

https://images.aaronequipment.com/ItemImages/Mixers/Paddle-Mixer/Paul-O-Abbe_52919007_aa.jpeg
Submit Offer $5,190 View

Stock No.:

52919007

Used Paul O Abbe Stainless Steel Fluidizer – 0.7 Cu Ft for Sale

Used- Paul O Abbe Fluidizer, Stainless Steel. Approximate 0.7 cubic feet, 20 liter. Non jacketed trough, 16" wide x 18-1/2" long x 18-1/2" deep. (2) 1-1/2" diameter x 15" long shafts, each have (14) 3" long x 3" wide x 1/8" thick paddles on 1/2" diameter posts. Driven by (2) .33hp, 3/60/230/460 volt, 1700rpm motors, through a reducer 8:1. Bottom bombay doors. 9-1/2" Diameter bottom discharge, 20" discharge height. Includes mounted control panel. Mounted on (4) casters. Serial# A45254.

MFR: Paul O Abbe

https://images.aaronequipment.com/ItemImages/Mills/Hammer-Mill/Quadro-196_50647001_aa.jpg
View

Stock No.:

50647001

Used - Quadro Comil Model 196, 304/316 Stainless Steel, 8,000 Lbs/Hr Capacity, 10 HP

Used- Quadro Comil, Model 196, 304 Stainless Steel. Approximate capacity up to 8,000 pounds an hour. 8" diameter top feed, 12" diameter bottom discharge. 12' dia x 12' dia housing. Requires (missing) impeller and impeller hardware. Housing 304 stainless steel, shaft and discharge chute 316 stainless steel. Driven by a 10 hp, 3/60/208-230/460 Volt, 1750 rpm motor. Serial# 0387.

MFR: Quadro

https://images.aaronequipment.com/ItemImages/Dryers-Drying-Equipment/Rotary-Hot-Air/Summerlot_52919005_aa.jpeg
View

Stock No.:

52919005

Used Summerlot Engineered Products Dryer – 316 Stainless Steel

Used- Summerlot Engineered Products Dryer, 316 Stainless Steel. Cantilevered S/C. 12" long x 6" wide feed hopper, with a 3-3/4" diameter x 48" long screw, 3/4" pitch. Driven by a 1hp, 3/60/208-230/460 volt, 1755 rpm motor. Approximately 10" diameter x 136" long dryer vessel, with (4) fixed baffles. Driven by a 2hp, 3/60/230/460 volt, 1140 rpm motor through reducer, 5.76:1. Approximate 8" diameter discharge with a Flowseal valve. 36" Discharge height. Serial# 88211.

MFR: Summerlot

https://images.aaronequipment.com/ItemImages/Tanks/Stainless-1000-4999-Gal/Criveller_52555001_ac.jpeg
Submit Offer $4,500 View

Stock No.:

52555001

Criveller Ganimede 5.5 Ton Capacity, 1,200 Gallon Wine Fermentation Tank

Used- Criveller Ganimede Wine Fermentation Tank, 5.5 Ton Capacity, 1,200 Gallon, 304 Stainless Steel, Vertical. Approximate 68" diameter x 106" straight side. Coned top and bottom. Internal funneled diaphragm cone, (2) 2" side bypass stations. Approximate 40" wide section top dimple jacket. Openings top: 15.75" manway, side: 17" x 12" manway. (5) 2" side openings, 3" Center bottom outlet with valve, approximate 14" discharge height. Mounted on (4) stainless steel legs. Serial# 791-1. Reported new never installed. Approx. overall height is 15'2". ***The tank is made entirely of stainless steel, and the outer shell has been painted***

MFR: Criveller

Explore our guides.

Enhance your equipment knowledge with our resources.

August 20, 2026

Guide to Equipment Photography for Faster Sales

Learn equipment photography tips that can help sell used machinery faster, including 360° photos, clean backgrounds, spec tags, lighting, and image quality.

Blog Used Equipment

April 7, 2026

Everything You Should Know Before Buying Used Cannabis Equipment

The cannabis industry has been booming, and with this growth comes the need for efficient and cost-effective manufacturing solutions.

Cannabis Industry Blog

April 7, 2026

Everything You Should Know Before Buying A Used Stainless Steel Tank

What do you need to know before buying a stainless-steel tank?

Tanks Blog

Sell Equipment

Have surplus equipment? We offer flexible options including direct purchase, consignment, or listing on our marketplace — all backed by trusted professionals.

Learn about selling

Buy Used Equipment

Discover one of the world’s largest inventories of used processing and packaging equipment — ready to ship and backed by decades of industry expertise.

Browse all equipment

Auctions

Join global buyers and sellers at AIS-hosted auctions featuring top-quality surplus equipment from leading facilities around the world.

View current auctions