CALL 630-350-2200
View All Equipment Auctions OEM & New Equipment
Appraisals Equipment Reconditioning Asset Management Plant Liquidation Financing Centrifuge Parts & Services
Company Overview Meet Our Team Locations & Contact

Explore our extensive equipment marketplace

Discover a wide range of used processing and packaging machinery tailored to meet your industry needs. Use our advanced search features to find the perfect equipment quickly and efficiently.

Recently added products

Clear
https://images.aaronequipment.com/ItemImages/Mills/3-Roll-or-More/52283018_aa.jpg
Submit Offer $6,750 View

Stock No.:

52283018

Used Douglas Aircraft 3-Roll Mill – 2.5" x 7" Rolls, 3/4 HP Motor

Used- Douglas Aircraft 3-Roll Mill. Includes 2-1/2" diameter X 7" face mild steel rolls. Manual spacing adjustment on rolls. Unit includes apron discharge, end plates and electrical panel. Driven by 3/4 HP, 220/440 Volts, 3-phase, 60 Hz, 1725 RPM motor. Foot pedal actuated.

https://images.aaronequipment.com/ItemImages/Mills/Hammer-Mill/Fitzpatrick_53264025_aa.jpg
View

Stock No.:

53264025

Stainless Hammer Mill by Fitzpatrick – Screw Feeder, Mounted on Casters

Used Fitzpatrick Hammer Mill, Swinging Hammers, with Screw Feeder (no name plate). Approximate chamber 11" x 6". Swinging hammers. Motor: 575 volt, 3500 rpm. Includes feed hopper and screw feeder, stainless steel control panel. Mounted on frame with casters. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Fitzpatrick

https://images.aaronequipment.com/ItemImages/Dryers-Drying-Equipment/Double-Cone-V-Rotary-Vacuum/Paul-O-Abbe-12_54043001_ac.jpg
View

Stock No.:

54043001

Used Paul O. Abbe 12" Rota-Cone Vacuum Dryer – 0.5 CuFt, T316 Stainless, Skid-Mounted with Sterlco Heater

Used Paul O. Abbe 12" Rota-Cone Vacuum Dryer 0.5 CuFt, T316 Stainless, Skid-Mounted with Sterlco Heater. Vessel Volume: .5 cuft. T316 Stainless steel. Carbon steel Jacket. $4 Polish interior (180 Grit). Operating temperature: 250 deg F (121 deg C) Speed of vessel: 9 rpm. Full Vacuum to 14.7 psi. Jacket is 14.7 psi Max. With Sterlco Sterl-Tronic Heater. Model M6016-MX, Serial# 73558, 6000 Watts. 150 psig. Serial# of POA dryer is A45546. built 1992. (Vacuum pump not included, but can be provided at extra cost).

MFR: Paul O Abbe

https://images.aaronequipment.com/ItemImages/Chillers/Chillers/CWM-003-UE_53719002_aa.jpg
View

Stock No.:

53719002

Used Friulair Chiller | Model CWM003-UE | 0.71 Ton | R407C Refrigerant | Compact Cooling System

Used- Friulair Chiller, Model CWM003-UE. 0.71 Ton nominal capacity. V0.013 gallon Refrigerant Circuit, R407C with 33.51 oz charge. Serial# 130021582. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

https://images.aaronequipment.com/ItemImages/Plastics-Equipment/Pelletizing-Line-Twin-Screw/Leistritz-Corporation-ZSE18HPe-P_54513001_aa.jpg
View

Stock No.:

54513001

Used Leistritz ZSE18HPe-P Twin Screw Co-Rotating Extrusion Pelletizing Line

Used Leistritz Twin Screw Co-Rotating Extrusion Line consisting of: (1) Leistritz Type ZSE18HPe-PH-40D Extruder, (2) 18 mm screws, approximately 40 to 1 L/D ratio, 1200 rpm maximum screw rotation, 8 zones electrically heated, water cooled, 9.4 kW drive, Machine # 3878, Built 2009. (1) Thermo Scientific Pharma 16 Varicut Pelletizer, Serial # 7.11/000094, Built 2011. With (2) K-Tron Feeders, Model K-SFS-24; (2) stainless steel water bath sections each 9" wide x 115" long.

MFR: Leistritz Corporation

https://images.aaronequipment.com/ItemImages/Plastics-Equipment/Extruders-Single-Screw-Extruder/Killion-KL-075_54037006_aa.jpeg
View

Stock No.:

54037006

Pre-Owned Killion KL-075 Single Screw Extruder – Electrically Heated, Air-Cooled

Used Killion KL-075 Single Screw Extruder. 19.1 mm Diameter screws. 25:1 L/D. Screw speed 12-120 RPM via a gearbox by a 1.1 kW-380 volt/50cycle/3Ph DC motor. 3 housing sections. Electrically heated, air cooled. Feed hoppers, control/operating panel and additional infrastructure. On wheels. Serial # 19707. In an R&D application. Over all dimensions: 42.9" (1100 mm) long x 35.1" (900 mm) width x 58.5" (1500 mm) high. Weight 660 lbs (300 kgs). Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Killion

https://images.aaronequipment.com/ItemImages/Plastics-Equipment/Pelletizing-Line-Twin-Screw/Prism-TSE-24TC_54400001_aa.jpg
View

Stock No.:

54400001

Prism VARICUT 24 Pelletizing Line with TSE 24TC Extruder

Used Prism Pelletizing Line. Consists of: Prism parallel twin screw extruder, model TSE 24TC, 24 mm co rotating screws, 25:1 l/d, electrically heated, water cooled barrel, (3) top vents with (2) plugged, 6 barrel zones with on board control panel, 3.7 kw, 230 volt ac motor drive with VFD controller, two hold stand die, serial# 2078. (1) screw feeder with .26 kw motor drive with agitated hopper. (1) Material hopper. (1) Prism water bath pelletizer unit, model VARICUT 24, with approximately 8" x 8" x 59" long stainless steel water bath, 2.5" wide air wipe with blower, 2 5/8" wide stand pelletizer with pull rolls, helical rotor, 1.1 kw motor drive. Serial# 2077, built 1996.

MFR: Prism

https://images.aaronequipment.com/ItemImages/Mixers/Double-Cone-V-Mixers/Munson-Machinery-MX-1-SS_11059351_aa.jpg
View

Stock No.:

11059351

Used Munson Industrial Rotary Blender – Model MX-1-SS

Used- Munson Industrial Rotary Blender, Model MX-1-SS. 1 cubic foot capacity; Stainless steel mixing chamber; Equipped with liquid spray nozzle. Mounted on portable stand with tilt discharge capabilities. Serial# 12190.

MFR: Munson Machinery

https://images.aaronequipment.com/ItemImages/Mixers/Double-Arm-Mixer-Extruders/AMK-VIU4_40425079_aa.jpg
View

Stock No.:

40425079

Used AMK VIU4 4-Liter Extrusion Kneader Mixtruder – Stainless Steel Sigma Blade Mixer Extruder with Vacuum Cover

Used- 4 Liter AMK Extrusion Kneader Mixtruder, Model VIU4. Stainless steel construction, vacuum cover, approximately 8" x 8" x 7.5" deep mixing changer, tangential sigma blades driven by 2.2 kw motor drive, discharge extruder driven by 1.5 kw motor drive, jacketed bowl and extruder barrel, on base, serial# 12202. Built 1985.

MFR: AMK

https://images.aaronequipment.com/ItemImages/Fork-Lifts-Lift-Trucks/Fork-Lifts-Lift-Trucks/Vestil-HDD-36-7-P_45053470_aa.jpg
Submit Offer $2,500 View

Stock No.:

45053470

Vestil Hydraulic Drum Dumper for 30 & 55 Gallon Drums – Portable Unit

Used Vestil Model HDD-26-7-P Hydraulic Drum Dumper. Maximum Capacity up to 750 Lbs. Works with 55 and 30-gallon plastic, steel and fiber drums. The unit has a solid steel chute. Portable unit with two rigid and two swivel casters with floor lock screws. All steel construction. Upper travel limit switch, emergency brass safety velocity fuse in cylinder and vertical adjustment drum restraints are standard. Chute is rotated with a hand held control on an 8 ft. long coil cord standard.

MFR: Vestil

https://images.aaronequipment.com/ItemImages/Fork-Lifts-Lift-Trucks/Fork-Lifts-Lift-Trucks/Yale-MSW020LAN2_47824012_aa.jpg
Submit Offer $3,500 View

Stock No.:

47824012

Used Yale 2,000 lb. Capacity 24V Electric Sit-Down Forklift – Model MSW020LAN24CS083

Used- Yale Aprox. 2,000 lb. Capacity 24 V Electric Sit-Down Forklift, Model MSW020LAN24CS083, S/N N576930 with 2-Stage 126" Lift Height

MFR: Yale

https://images.aaronequipment.com/ItemImages/Mixers/Double-Arm-Mixer/Paul-O-Abbe-1BSB_50140001_aa.jpg
Submit Offer $6,500 View

Stock No.:

50140001

Used Paul O. Abbe Lab Double Arm Mixer – Model 1BSB, 1 Gal, 316 SS, Hydraulic Tilt

Used- Paul O. Abbe Lab Double Arm Mixer, Model 1BSB, 316 Stainless Steel. 1 Gallon operating capacity (2 total). Carbon steel jacket rated 14 psi. Bowl approximate 7" left to right x 9-1/2" front to back x 6-3/4" deep, tangential sigma blades, front blade 70 to 17 rpm, rear blade 41 to 10 rpm, flat top cover, geared one end. Single ram hydraulic tilt with power pack. Mixer driven by a 2 hp, 3/60/230/460 volt, 814 rpm variable speed motor with reducer. Mounted on legs with base. Serial # A41282.

MFR: Paul O Abbe

Recently reduced items

https://images.aaronequipment.com/ItemImages/Mixers/Paddle-Mixer/Paul-O-Abbe_52919007_aa.jpeg
Submit Offer $5,190 View

Stock No.:

52919007

Used Paul O Abbe Stainless Steel Fluidizer – 0.7 Cu Ft for Sale

Used- Paul O Abbe Fluidizer, Stainless Steel. Approximate 0.7 cubic feet, 20 liter. Non jacketed trough, 16" wide x 18-1/2" long x 18-1/2" deep. (2) 1-1/2" diameter x 15" long shafts, each have (14) 3" long x 3" wide x 1/8" thick paddles on 1/2" diameter posts. Driven by (2) .33hp, 3/60/230/460 volt, 1700rpm motors, through a reducer 8:1. Bottom bombay doors. 9-1/2" Diameter bottom discharge, 20" discharge height. Includes mounted control panel. Mounted on (4) casters. Serial# A45254.

MFR: Paul O Abbe

https://images.aaronequipment.com/ItemImages/Dryers-Drying-Equipment/Rotary-Hot-Air/Summerlot_52919005_aa.jpg
View

Stock No.:

52919005

Used Summerlot Engineered Products Dryer – 316 Stainless Steel

Used- Summerlot Engineered Products Dryer, 316 Stainless Steel. Cantilevered S/C. 12" long x 6" wide feed hopper, with a 3-3/4" diameter x 48" long screw, 3/4" pitch. Driven by a 1hp, 3/60/208-230/460 volt, 1755 rpm motor. Approximately 10" diameter x 136" long dryer vessel, with (4) fixed baffles. Driven by a 2hp, 3/60/230/460 volt, 1140 rpm motor through reducer, 5.76:1. Approximate 8" diameter discharge with a Flowseal valve. 36" Discharge height. Serial# 88211.

MFR: Summerlot

https://images.aaronequipment.com/ItemImages/Dryers-Drying-Equipment/Oven/PB-1542_50028005_aa.jpg
View

Stock No.:

50028005

Unused JBT Foodtech FORMCOOK Progrill Contact Cooker – Model PB-1542 Electric ProBake

Unused- JBT Foodtech FORMCOOK Progrill Contact Cooker. Model PB-1542 Electric ProBake. With 10 Degree Incline and Top Belt. Overall Belt Width 60". Usable Belt Width 59", Cooking Length 13.78'. Seven Lower Electric Platens, Upper and Lower Teflon Style Belting. Electrical Specifications 460/3/60 (110/1/60), Electric Drive, Basic Belt Cleaning System, Digital Read-out System, 12" Out-feed Conveyor, Standard Exhaust Fan. Controllogix Processor disconnects on all motors. HMI Screen A. Platens 3/60/460 / 1/60/110 Electric Drive.

https://images.aaronequipment.com/ItemImages/Pumps/Stainless-Centrifugal/APV-Crepaco-W20-20_53011006_aa.jpeg
Submit Offer $2,375 View

Stock No.:

53011006

High-Efficiency APV Crepaco W20/20 Pump – 105 GPM, 3500 RPM

High-Efficiency APV Crepaco W20/20 Pump 105 GPM, 3500 RPM. Approximate 105 gallons per minute, 95 head feet @ 3500 rpm. Approximate 2" inlet, 2" outlet. Driven by a 5hp, 3/60/230/460 volt, 3500 rpm motor. Serial# H-9296-95.

MFR: APV/Crepaco

Explore our guides.

Enhance your equipment knowledge with our resources.

August 20, 2026

Guide to Equipment Photography for Faster Sales

Learn equipment photography tips that can help sell used machinery faster, including 360° photos, clean backgrounds, spec tags, lighting, and image quality.

Blog Used Equipment

April 7, 2026

Everything You Should Know Before Buying Used Cannabis Equipment

The cannabis industry has been booming, and with this growth comes the need for efficient and cost-effective manufacturing solutions.

Cannabis Industry Blog

April 7, 2026

Everything You Should Know Before Buying A Used Stainless Steel Tank

What do you need to know before buying a stainless-steel tank?

Tanks Blog

Sell Equipment

Have surplus equipment? We offer flexible options including direct purchase, consignment, or listing on our marketplace — all backed by trusted professionals.

Learn about selling

Buy Used Equipment

Discover one of the world’s largest inventories of used processing and packaging equipment — ready to ship and backed by decades of industry expertise.

Browse all equipment

Auctions

Join global buyers and sellers at AIS-hosted auctions featuring top-quality surplus equipment from leading facilities around the world.

View current auctions