August 20, 2026
Guide to Equipment Photography for Faster Sales
Learn equipment photography tips that can help sell used machinery faster, including 360° photos, clean backgrounds, spec tags, lighting, and image quality.
Discover a wide range of used processing and packaging machinery tailored to meet your industry needs. Use our advanced search features to find the perfect equipment quickly and efficiently.
Cannabis Equipment
5 subcategories
Dryers - Drying Equipment
13 subcategories
Mills
10 subcategories
Packaging Equipment
40 subcategories
71 Categories
(1)
(63)
(45)
(60)
(23)
(29)
(27)
(26)
(42)
(21)
(9)
(33)
(24)
(51)
(23)
(15)
(63)
(3)
(25)
(58)
(37)
(11)
(20)
(23)
(1)
(5)
(6)
744 Manufacturers
Browse all equipmentStock No.:
10128089Used- Fryma Model VME-2400 Jacketed Vacuum Mixer with 2,400 liter (634 gallon) working capacity. Vessel measures 61" diameter x 54" straight side with 11" dome top and 11" dish bottom, 63" overall diameter with jacket, and 101" overall height including legs and lid. Interior and jacket rated for 150 C, with vessel rated -1/+1 bar and jacket rated 2.5 bar. Equipped with 7.5 HP drive operating center 3-prop agitator and scrape agitator through chain drive, plus 50 HP drive operating off-center disperser-type agitator. Polished pharmaceutical-grade interior. Top includes 8" flanged clamped opening, 6" glass inspection port with light, 2" sanitary fitting, 1.5" sanitary fitting, and (2) 1" threaded fittings. Bottom equipped with 6" sanitary discharge with pneumatically operated valve. Requires 230/460 VAC, 3-phase electrical supply. Fabrication # M10510. Previously used for toothpaste. Good condition. Suitable for vacuum mixing, dispersing, and deaerating toothpaste, creams, gels, pastes, ointments, cosmetics, and other viscous products.
MFR: Fryma
Stock No.:
41174082Used- BRODR. HETLAND A/S, 1-Effect Pilot Falling-Film Vacuum Evaporator Unit, Type HIFS 6. 316L Stainless steel.64.58 Sq. ft ( 6 m2) heating surface. 220 lbs/HR (100KG/HR) Water evaporation % DS til 35 % DS. 7. 20 pipes 1.3" (33.7 mm) dia x 9'8" (3000 mm) long pipes. Serial# 8401-B4. Complete with piping, pumps, sensors and additional infrastructure. Previously used in a protein application. Our Freight specialists can assist with any customs documentation to insure a smooth transition.
Stock No.:
54352009Used-Imperial Systems Dust Collector, Model CM-16, Serial# 5167, Year 2021. Approximate 6400 square feet filter area, nominal CFM range 2800-28000. With top mounted 75 HP blower, rotary valve & panel.
MFR: Imperial
Stock No.:
41174071Used Haarslev HCD 60 Coil Disc Dryer | 7.5 T/hr Capacity | 60 m Heating Surface | Stainless Steel | Built 2018. Total capacity 7.5 tonnes/hr. depending on the product. Heating surface 645 sq ft (60 m2). 22 KW (29.5hp) motor. Inspection doors and additional infrastructure. On 4 legs. Previously used in a fish meal in application. Over all dimensions: 5084 mm long x 1876 mm wide x 2781 mm high. Weight 11 tonnes empty. New 2018, Incl. scrubber and air ventilator. Our freight specialists can assist you with door-to-door transportation and all customs documents needed to make the process go as smoothly as possible. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
Stock No.:
10715035NEW & IN STOCK- Paul O. Abbe Model RB-65 Ribbon Blender. In -Stock .65 Cubic Foot working capacity. 72 Cubic Foot total volume. Type 304 stainless steel polished. Food grade. All stainless steel construction. Trough dimensions: Approximately 39.4" wide x 78.8" long x 44.1" deep. Internal double spiral ribbon. Packing glands and pillow block bearings. 30 hp SEW Euro drive hollow bore design. 230/460 volt, 1775 rpm, 3/60 with approximately output 36 rpm. Top cover with hold down clamps and limit switch. Center Loading cover with welded safety grate, 30" wide x 50" long. Approximate 4.7" wide x 14.2" flush air operated plug valve. Discharge housing is approximate 18.5" wide x 24" long. Approximately 23" discharge height. Approximate weight 5,060 pounds. Approximate overall dimensions: 60.6" wide x 131.4" long x 90.3" high. Controls are available upon request.
MFR: Paul O Abbe
Stock No.:
53147010Used- Precision Stainless Reactor, 250-Liter (65 Gallon) 316L Stainless Steel. Rated for a maximum allowable working pressure (MAWP) of 40 PSI/Full Vacuum at 350 degrees Fahrenheit. Jacket rated for 100 PSI at 350 degrees Fahrenheit. Multiple top inlets, clamps and probes, dished bottom. Forklift ready, mobile on casters. National Board number 7297. Includes Lightnin agitator with control panel. Previously used in biotech operation.
MFR: Precision Stainless
Stock No.:
53147011Used- Precision Stainless Inc. 250-Liter (65 Gallon) Reactor, 316L Stainless Steel. Rated for a maximum allowable working pressure (MAWP) of 40 PSI/Full Vacuum at 350 degrees Fahrenheit. Jacket rated for 100 PSI at 350 degrees Fahrenheit. Multiple top inlets, clamps and probes, dished bottom. Forklift ready, mobile on casters. National Board number 7296. Includes Lightnin agitator with control panel. Previously used in biotech operation.
MFR: Precision Stainless
Stock No.:
53264040Used FPEC Vacuum Tumbler, Model VT-85 | 5,000 lb Capacity | 304 Stainless Steel | 10 HP Motor | Front Load | Food Grade. Interior tumbler dimensions: 65'' diameter x 72'' straight side. Front Load. Motor: 10 hp, 575 volt, 1765 rpm. Reducer ratio: 37.19/1. Output rpm: 47 approximately. 304 stainless steel contact parts. Previous use: food application. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
MFR: FPEC
Stock No.:
50800029Unused 6,500 gallon vertical tank constructed of 304 stainless steel. Tank measures 114" diameter x 144" straight side and features a single wall design with a slight cone top and slight cone bottom to promote product flow. Mounted on (6) stainless steel support legs for stability and ease of installation
Stock No.:
50800040Unused 6,500 Gallon 304 Stainless Steel Vertical Tank | Single Wall Storage Vessel. 144" Straight Side X 114" Diameter. Single wall. Slight coned top and bottom. Mounted on (6) Stainless Steel legs.
MFR: Unknown
Stock No.:
52919007Used- Paul O Abbe Fluidizer, Stainless Steel. Approximate 0.7 cubic feet, 20 liter. Non jacketed trough, 16" wide x 18-1/2" long x 18-1/2" deep. (2) 1-1/2" diameter x 15" long shafts, each have (14) 3" long x 3" wide x 1/8" thick paddles on 1/2" diameter posts. Driven by (2) .33hp, 3/60/230/460 volt, 1700rpm motors, through a reducer 8:1. Bottom bombay doors. 9-1/2" Diameter bottom discharge, 20" discharge height. Includes mounted control panel. Mounted on (4) casters. Serial# A45254.
MFR: Paul O Abbe
Stock No.:
50647001Used- Quadro Comil, Model 196, 304 Stainless Steel. Approximate capacity up to 8,000 pounds an hour. 8" diameter top feed, 12" diameter bottom discharge. 12' dia x 12' dia housing. Requires (missing) impeller and impeller hardware. Housing 304 stainless steel, shaft and discharge chute 316 stainless steel. Driven by a 10 hp, 3/60/208-230/460 Volt, 1750 rpm motor. Serial# 0387.
MFR: Quadro
Stock No.:
52919005Used- Summerlot Engineered Products Dryer, 316 Stainless Steel. Cantilevered S/C. 12" long x 6" wide feed hopper, with a 3-3/4" diameter x 48" long screw, 3/4" pitch. Driven by a 1hp, 3/60/208-230/460 volt, 1755 rpm motor. Approximately 10" diameter x 136" long dryer vessel, with (4) fixed baffles. Driven by a 2hp, 3/60/230/460 volt, 1140 rpm motor through reducer, 5.76:1. Approximate 8" diameter discharge with a Flowseal valve. 36" Discharge height. Serial# 88211.
MFR: Summerlot
Stock No.:
50028005Unused- JBT Foodtech FORMCOOK Progrill Contact Cooker. Model PB-1542 Electric ProBake. With 10 Degree Incline and Top Belt. Overall Belt Width 60". Usable Belt Width 59", Cooking Length 13.78'. Seven Lower Electric Platens, Upper and Lower Teflon Style Belting. Electrical Specifications 460/3/60 (110/1/60), Electric Drive, Basic Belt Cleaning System, Digital Read-out System, 12" Out-feed Conveyor, Standard Exhaust Fan. Controllogix Processor disconnects on all motors. HMI Screen A. Platens 3/60/460 / 1/60/110 Electric Drive.
Explore our guides.
Enhance your equipment knowledge with our resources.
August 20, 2026
Guide to Equipment Photography for Faster Sales
Learn equipment photography tips that can help sell used machinery faster, including 360° photos, clean backgrounds, spec tags, lighting, and image quality.
April 7, 2026
Everything You Should Know Before Buying Used Cannabis Equipment
The cannabis industry has been booming, and with this growth comes the need for efficient and cost-effective manufacturing solutions.
April 7, 2026
Everything You Should Know Before Buying A Used Stainless Steel Tank
What do you need to know before buying a stainless-steel tank?
Sell Equipment
Have surplus equipment? We offer flexible options including direct purchase, consignment, or listing on our marketplace — all backed by trusted professionals.
Buy Used Equipment
Discover one of the world’s largest inventories of used processing and packaging equipment — ready to ship and backed by decades of industry expertise.
Auctions
Join global buyers and sellers at AIS-hosted auctions featuring top-quality surplus equipment from leading facilities around the world.