CALL 630-350-2200
View All Equipment Auctions OEM & New Equipment
Appraisals Equipment Reconditioning Asset Management Plant Liquidation Financing Centrifuge Parts & Services
Company Overview Meet Our Team Locations & Contact

Explore our extensive equipment marketplace

Discover a wide range of used processing and packaging machinery tailored to meet your industry needs. Use our advanced search features to find the perfect equipment quickly and efficiently.

Recently added products

Clear
https://images.aaronequipment.com/ItemImages/Complete-Plants/Plant-Lines/54263001_aa.jpg
View

Stock No.:

54263001

Used Semi-Automated Mushroom Substrate Processing System for Sale

Used Semi-automated Mushroom Substrate Processing System. Integrates high-performance components to efficiently manage pasteurization, cooling, inoculation, and packaging all within a single vessel. Two jacketed Patterson All-Weld Paddle Mixers (37 cubic feet each) operate simultaneously to blend substrate ingredients uniformly while maintaining controlled processing conditions. Substrate moisture content is controlled using a Water Metering Sensor (FD-Q20C) and circulating pump, which measures amount of water added from a 120-gallon (A.O. Smith) hot water tank into the substrate. The mixers heat the substrate up to 98c through their closed loop hydronic heating jackets. The Reimers (RHC-360) Electric Steam Boiler feeds steam to the Cascade Flow Control Solutions Heat Exchanger (263450-004) which heats the hydronic jacket loop. A steam actuating valve (STERLCO D151-F) modulates steam flow from the boiler, maintaining optimal jacket temperatures and pressure needed to reliably pasteurize substrate. After pasteurization, the substrate is cooled via the jackets which are isolated and chilled through a two-stage Thermaline Heat Exchanger (T8 S-20). The first cooling stage transfers substrate heat to municipal water. The heated municipal water is collected in the 120 gallon water tank for later use in substrate hydration. The second cooling stage uses glycol chilled by a G&D 10 HP (GD-10H-HT) unit to rapidly reduce substrate temperature for inoculation. Inoculation is performed through a hatch under sterile Air Science flow hoods (36" and 24"), providing clean, positive-pressure air to prevent contamination. Substrate packaging takes place at the bottom of each vessel through an 8" pneumatic actuating valve in unicorn bags, long tubes, or by connection to another system. Mixer #2 uses a Spartan Controls automated control package to manage processing parameters like mixing, heating, cooling, and packaging via integrated sensors and pneumatic valves. Mixer #1 is manually operated. Sterile air filters from Davis Controls maintain sterile positive-pressure conditions in the mixers throughout the entire process. The steam and hydronic system include Axiom DMF-300 and CBF-2 chemical dosing units to maintain system pressure, fluid levels, and chemical treatment of jacket water. Supporting components including solenoid valves, expansion tanks, gauges, and pipework in steel, stainless, brass, copper, and PEX ensures durability and resistance to temperature fluctuations. Boiler chemicals in the heating loop and inhibited glycol in the chilling loop protect the system from oxidation. The integrated system enables efficient, scalable, and consistent production of high-quality mushroom substrate with reduced labor cost and precise control over all critical processing parameters.

https://images.aaronequipment.com/ItemImages/Feeders/Rotary-Airlock/B-HT350EX00_54253002_aa.jpeg
Submit Offer $3,750 View

Stock No.:

54253002

VDL Industrial Rotary Airlock (Built 2022) – B-HT350EX00 for Sale

Used VDL Industrial Products Rotary Air lock, Model B-HT350EX00. Driven by 0.37kW / 0.50 HP, 3/60/277/480 volt, 1730/15 rpm motor. Serial# U-221467/B. Built 2022.

https://images.aaronequipment.com/ItemImages/Compressors/Compressor-Air-Dryer/54253006_aa.jpeg
Submit Offer $1,750 View

Stock No.:

54253006

Used Quincy Mist Eliminator Air Treatment Unit

Used Quincy Air Treatment Unit - Mist Eliminator. Industrial compressed-air vessel, identified as Unit 3, is a vertical steel separator/filter housing designed for inline air-treatment service within a multi-compressor system. The unit features a bolted top cover with multiple service ports, heavy-duty welded legs, and integrated inlet/outlet connections sized for high-flow compressed-air applications. Internal rated 150 psi at -20 to 300 degrees F. Mounted on (3) legs. National Board & Serial# 890143. Built 2022.

https://images.aaronequipment.com/ItemImages/Compressors/Compressor-Air-Dryer/54253007_aa.jpeg
Submit Offer $1,750 View

Stock No.:

54253007

Quincy Industrial Compressed Air Mist Eliminator Separator

Used Quincy Mist Eliminator Air Treatment Unit. Industrial compressed-air vessel, identified as Unit 3, is a vertical steel separator/filter housing designed for inline air-treatment service within a multi-compressor system. The unit features a bolted top cover with multiple service ports, heavy-duty welded legs, and integrated inlet/outlet connections sized for high-flow compressed-air applications. Internal rated 150 psi at -20 to 300 degrees F. Mounted on (3) legs. National Board & Serial# 890142. Built 2022.

https://images.aaronequipment.com/ItemImages/Plastics-Equipment/Sheet-Extrusion-Lines/54129001_aa.jpg
View

Stock No.:

54129001

PET Sheet Extrusion Line – 48” Wide, 2,000 lbs/hr, OMV D140 Extruder, (Used)

Used- PET Sheet Extrusion Line Capable up to 48" Wide, currently has 32"W Allied Flex-Lip Extrusion Die. 2,000 lbs/hr, OMV D140 Extruder (Used) 350 HP main motor; 30 HP drive system; Rated up to 2,000 lbs/hour (dependent on material and configuration); Multi-zone cooling rolls; Chrome-polished roll stack. OMV Single Screw Extruder, Model D140 6P. 6" diameter. SN 01087; 3/60/480V. Built 2001. With Operating panel, Conveyor, Draw rolls, Temperature control system, Chiller, Vacuum loader, and Winder/accumulator.

https://images.aaronequipment.com/ItemImages/Centrifuges/Decanter/Alfa-Laval-G2-40_54047001_aa.jpg
View

Stock No.:

54047001

Used Alfa Laval Aldec-G2-40 Solid Bowl Decanter Centrifuge – 316SS, 4000 RPM, 40 HP, Wastewater Application

Used Alfa Laval Aldec-G2-40 Solid Bowl Decanter Centrifuge 316SS, 4000 RPM, 30 HP, Wastewater Application. Maximum bowl speed 4000 RPM. Single row of lined cake discharges ports with wear liners, liquid plate dams, base, stainless steel casing, gearbox, Approx 40 HP, 460 Volt Baldor, main drive motor. Frame mounted on (4) legs. Mfg. 2007. Previously used in a wastewater treatment application.

MFR: Alfa Laval

https://images.aaronequipment.com/ItemImages/General-Equipment/General-Equipment/54060001_aa.jpg
View

Stock No.:

54060001

Used HJM Precision Ignition Cartridge Non-Destructive Inspection Machine | PLC Controlled | 3-Axis Robot | Built 2019

Used- HJM Precision, Inc. Ignition Cartridge Non-destructive Inspection Machine. The machine has been designed and manufactured for the purpose of inspecting Ignition Cartridges for leaks. It is controlled by a PLC with an HMI for the operator to move the machine in manual mode for homing, clearing product, cleaning, etc., and to operate the machine in automatic mode. The cartridges are loaded into the machine in an input tray. The cartridges are then placed in test chambers by means of a robot. The chambers are moved to the test position. Covers lower to the top of the test chambers and nozzles extend to the test chambers near the bottom. Three axis robot system consisting of three slides and a gripper. The robot moves in X, Y , and Z directions with X being the length of the machine, Y across the machine, and Z vertical. Four test chamber blocks on the dial plate. Each of the test chamber blocks has four chambers in them. Gilmont flow meters and Hoke needle valves are used to calibrate the machine. New in 2019.

https://images.aaronequipment.com/ItemImages/Mining-Equipment/Specialized-Equipment/54067001_aa.jpg
View

Stock No.:

54067001

Used Trailerized Silver Refining System | Amprep Maxxi-Cell | Fume Scrubber | Diesel Generator | Mobile Lab

Used Trailerized Silver Refining System | Amprep Maxxi-Cell | Fume Scrubber | Diesel Generator | Mobile Lab. Consisting of: Amprep Silver Maxxi-Cell silver cells; Crystal Washer; Bleed-feed system; Harrington Dual-Stage Fume Scrubber; Atmospheric Evaporator. Powered by a 6068 HF485 diesel engine and a Stamford generator head, rated 37.5 kva (904 hours) 3ph/208V, with stationary magnets and 275 gallon fuel tank. Equipment housed in a trailer w/ hydraulic rams to open sides of trailer in operation.

https://images.aaronequipment.com/ItemImages/Generators/Steam-Turbine/TST-2100LR_54200001_aa.jpg
View

Stock No.:

54200001

Unused Triveni Steam Turbine Generator – Model TST-2100LR, 9.8 MW, 1800 RPM

Unused Triveni Steam Turbine Generator Model TST-2100LR, 9.8 MW, 1800 RPM. 38.57 bar at 395 degrees C (743 degrees F.) inlet, 57 t/h. 0.288 bar at 68.2 degrees C (154.76 degrees F.) exhaust. 19.7 bar at 316.1 degrees C (600.98 degrees F.) bleed. 1800 RPM. Built 2018.

https://images.aaronequipment.com/ItemImages/Centrifuges/Decanter/Dorr-Oliver-12L_54188001_aa.jpg
View

Stock No.:

54188001

Used Dorr Oliver 12L Solid Bowl Decanter Centrifuge – Stainless Steel, 5000 RPM, Reconditioned

Used- Dorr Oliver 12L solid bowl Decanter Centrifuge, Stainless steel construction (product contact areas), max bowl speed 5000 rpm, 2.5" double lead conveyor, centripetal pump liquid discharge, base, stainless steel solids discharge chute, bowl cover, 35:1 ratio cyclo gearbox. 15 hp drive motor (460/3/60), vibration switch, belt guard. (Reported to be reconditioned and unused since)

MFR: Dorr Oliver

https://images.aaronequipment.com/ItemImages/Dryers-Drying-Equipment/Fluid-Bed-Continuous/Carrier-FTDAD-C2460S-6-8-2_54191001_ab.jpg
View

Stock No.:

54191001

Used Carrier Fluid Bed Dryer – Model FTDAD/C2460S, Gas-Fired, 24" x 5.5' Heated Section, Carbon Steel

Used- Carrier Fluid Bed Dryer, Model FTDAD/C2460S. 24" wide x 56 heated section and 2 cooling section. Gas fired. Carbon steel wetted parts. 316 strokes. 890 rpm, 460 volt. Built 2012.

MFR: Carrier

https://images.aaronequipment.com/ItemImages/Mills/Colloid-Mill/Greerco-W250H_54209009_aa.jpeg
View

Stock No.:

54209009

Buy Used Greerco W250H – High-Shear Emulsifier for Pharma, Food & Chemical Use

Used Greerco Model W250H Portable Colloid Mill, Stainless Steel. Designed for high-shear emulsifying, dispersing, and homogenizing of liquid and semi-solid products in pharmaceutical, cosmetic, food, and chemical applications. All product-contact parts are stainless steel for sanitary processing and corrosion resistance. Equipped with a 2 HP explosion-proof motor, the W250H offers reliable performance in environments requiring hazardous-duty equipment, while its portable frame enables easy movement across production areas for flexible, small-scale processing. Manufactured in 1998, Serial No. 3-04342.

MFR: Greerco

Recently reduced items

https://images.aaronequipment.com/ItemImages/Mixers/Paddle-Mixer/Paul-O-Abbe_52919007_aa.jpeg
Submit Offer $5,190 View

Stock No.:

52919007

Used Paul O Abbe Stainless Steel Fluidizer – 0.7 Cu Ft for Sale

Used- Paul O Abbe Fluidizer, Stainless Steel. Approximate 0.7 cubic feet, 20 liter. Non jacketed trough, 16" wide x 18-1/2" long x 18-1/2" deep. (2) 1-1/2" diameter x 15" long shafts, each have (14) 3" long x 3" wide x 1/8" thick paddles on 1/2" diameter posts. Driven by (2) .33hp, 3/60/230/460 volt, 1700rpm motors, through a reducer 8:1. Bottom bombay doors. 9-1/2" Diameter bottom discharge, 20" discharge height. Includes mounted control panel. Mounted on (4) casters. Serial# A45254.

MFR: Paul O Abbe

https://images.aaronequipment.com/ItemImages/Mills/Hammer-Mill/Quadro-196_50647001_aa.jpg
View

Stock No.:

50647001

Used - Quadro Comil Model 196, 304/316 Stainless Steel, 8,000 Lbs/Hr Capacity, 10 HP

Used- Quadro Comil, Model 196, 304 Stainless Steel. Approximate capacity up to 8,000 pounds an hour. 8" diameter top feed, 12" diameter bottom discharge. 12' dia x 12' dia housing. Requires (missing) impeller and impeller hardware. Housing 304 stainless steel, shaft and discharge chute 316 stainless steel. Driven by a 10 hp, 3/60/208-230/460 Volt, 1750 rpm motor. Serial# 0387.

MFR: Quadro

https://images.aaronequipment.com/ItemImages/Dryers-Drying-Equipment/Rotary-Hot-Air/Summerlot_52919005_aa.jpeg
View

Stock No.:

52919005

Used Summerlot Engineered Products Dryer – 316 Stainless Steel

Used- Summerlot Engineered Products Dryer, 316 Stainless Steel. Cantilevered S/C. 12" long x 6" wide feed hopper, with a 3-3/4" diameter x 48" long screw, 3/4" pitch. Driven by a 1hp, 3/60/208-230/460 volt, 1755 rpm motor. Approximately 10" diameter x 136" long dryer vessel, with (4) fixed baffles. Driven by a 2hp, 3/60/230/460 volt, 1140 rpm motor through reducer, 5.76:1. Approximate 8" diameter discharge with a Flowseal valve. 36" Discharge height. Serial# 88211.

MFR: Summerlot

https://images.aaronequipment.com/ItemImages/Tanks/Stainless-1000-4999-Gal/54567010_aa.jpeg
View

Stock No.:

54567010

Used Paul Mueller 1,500 Gallon 304 Stainless Steel Tank

Used Paul Mueller Company stainless steel pressure vessel, Type 304 stainless steel construction, 76" diameter x Height 170" to top mixer. 145" to top hatch, Top hatch 24" diameter x Legs 56" x 56". Serial# 106184-1, built 1992. Vessel manufactured to DIN Part RT4 pressure vessel standards. Unit designed for heat transfer service with heating surface (exact area not legible). Tank is rated Atmospheric.

Explore our guides.

Enhance your equipment knowledge with our resources.

August 20, 2026

Guide to Equipment Photography for Faster Sales

Learn equipment photography tips that can help sell used machinery faster, including 360° photos, clean backgrounds, spec tags, lighting, and image quality.

Blog Used Equipment

April 7, 2026

Everything You Should Know Before Buying Used Cannabis Equipment

The cannabis industry has been booming, and with this growth comes the need for efficient and cost-effective manufacturing solutions.

Cannabis Industry Blog

April 7, 2026

Everything You Should Know Before Buying A Used Stainless Steel Tank

What do you need to know before buying a stainless-steel tank?

Tanks Blog

Sell Equipment

Have surplus equipment? We offer flexible options including direct purchase, consignment, or listing on our marketplace — all backed by trusted professionals.

Learn about selling

Buy Used Equipment

Discover one of the world’s largest inventories of used processing and packaging equipment — ready to ship and backed by decades of industry expertise.

Browse all equipment

Auctions

Join global buyers and sellers at AIS-hosted auctions featuring top-quality surplus equipment from leading facilities around the world.

View current auctions