Used Aaron Process Mixers

Stock# 11252086

Used Aaron Process Vacuum Dryer with Cored Shafts and Jacketed Trough. All Stainless Steel construction, 200 gallon capacity. All parts are insulated and sheathed with 304 Stainless Steel and polished to 150 - 180 grit finish. Mixing/drying chamber includes vacuum cover and is jacketed. Rated for 200 PSI at 450 degree F / -20 degree F. ASME code constructed. Mixing chamber measures 48" x 40" x 44" deep and includes (2) 6" diameter flanged discharges with ball valves. Blades are overlapping double nobben blades and driven by 125 hp motor thru heavy duty gearbox. Previously used in clean room type environment. Complete with control panel and unitized on heavy duty frame. Includes main control panel, power panel with starters and VFD's, steam-to-water heat exchanger for heating of jacket and hydraulic pump/reservoir for opening vessel lid. Also includes top mounted, stainless steel Mikro Pulsaire dust collector. Model 10-2-FV TR, rated for 11. Mfg 2000.

Stock# 40425019

Used Aaron Process 100 Cubic Foot Ribbon Blender, Stainless Steel Construction. Approximately 46" wide x 94" long trough, double ribbon, outboard roller bearings, packing gland seals. 10" Center bottom outlet with pneumatic slide gate valve. Chain and sprocket driven by 30 hp, 220/440 volt motor drive. Mounted on legs. Serial# 121000301114IMB.

Stock# 52879001

Used Aaron Process 1 Gallon Lab Sigma Blade Mixer. Model LNG-1. 304 Stainless Steel bowl measures 7" wide x 9-3/8" long x 8-3/4" deep. Vacuum rated. Top Cover with (2) 2" sight glasses. Jacketed 14.7 psig at 400 degree F. Manual tilt with handle. 2 hp DC motor, 180 volt, 1750 rpm, 9.4 amps. TEFC. 25/1 gearbox ratio. Includes control panel. Speed control with readout, start/stop and E-Stop.

Stock# 53009001

Used Aaron Laboratory Sigma Blade Mixer, 1 Quart (.25 Gallon) Working Capacity, Stainless Steel. 1-1/2 Quart total capacity. Jacketed chamber approximate 5.75" x 4", vacuum rate. Stainless steel construction with stainless steel blades. Sigma blades driven by 3/4hp, 90 volt, 1750 rpm DC gear motor, 25:1 ratio. Has Bronco II adjustable speed controller. Hand tilt, vacuum cover. Mounted on a base.

Stock# 53653001

Used Aaron Process Double Spiral Ribbon Blender, Model NR-24, 304 Stainless Steel. Working capacity 24 cubic feet, full capacity 28 cubic feet. Consisting of 26" wide x 66" long x 30" deep non-jacketed trough. Approximate 3-1/2" diameter, inner ribbon 2" wide x 1/4" thick, outer 1" wide x 3/8" thick, welded to 3/8" thick support bars. Driven by a 7.5 hp, 3/60/230/460 volt, 1770 rpm motor, thru a Dodge torque arm reducer, 24.38 to 1 ratio. Has outboard roller bearings, standard packing glands, (1) piece top clamp down cover with hinged access door, and safety grate. 6" Center bottom outlet. Control panel with Automation direct HMI, Koyo Direct Logic 205 PLC. Mounted on painted carbon steel legs. Serial# 73237NR.