Used IMA Packaging Equipment

Stock# 70368002

Used- IMA BFB Model CPV15 Automatic Top Load Case Erector Packer and Sealer. Capable of speeds up to 15 cases per minute (depending on application). Has a case size range: 190mm - 600mm (Length) x 80mm - 400mm (Width) and 100mm - 350mm (Depth/Height). Equipped with Allen Bradley PLC controls and Allen Bradley PanelView Plus 1000. Has pressure sensitive top and bottom tape heads for case sealing. Last used in pharmaceutical packaging operation.. Elec: 3/60/480V. 38 amps.

Stock# 70970344

Used- IMA Model Precisa 120 Tablet/Capsule Checkweigher. Machine is rated at up to 120,000 capsules per hour. Capsule size range from 40 mg to 200 mg with +/- 2 mg accuracies. Is of stainless steel construction with 12 lane counting configuration. Now tooled for #4 capsule size. Rear-mounted dOKI Microline 280 (9 pin printer) Hata printer. Has Omron Sysmac CQM! Plc controller. 3/60/208V 18 amps. Serial PA 1042. This machine was used to weigh diphedryl capsules.

Stock# 72535003

Used- IMA (BFB) Model CP18BA Automatic Case Erector Packer and Sealer. Capable of speeds up to 8 cases per minute (depending on application and collation). Has a case size range: 220mm - 600mm (8.66 - 23.62") length x 120mm - 400mm (4.72 - 15.75") width x 120mm - 350mm (4.72" - 13.78") depth. Seal bar 22" long. Has pre-folded leaflet inserter, tape sealing head, Optel OP300 vision system. Allen Bradley Compactlogix L35E PLC, A/B panelview plus 1000 HMI, A/B powerflex 40. 3/60480 Volt. Last used in pharmaceutical packaging operation.

Stock# 72825001

Used-IMA (Zanasi) Model Z40F Capsule Filler. Capable of speeds up to 40,000 capsules per hour. Has a capsule size range: 000 - 5, supro A-E, DB, DBAA. Currently set up for size 00 and 0 capsules. Stainless steel construction. Air requirements 100 dm3/min - 6 bar. 3/60/230V. Last used on supplements.

Stock# 73003001

Used- IME Innovative Machine Engineering Model 2101 8-Head Semi Automatic Inline Pressure Filler. Stainless Steel Construction. (8) Nozzles 5/8" diameter. Adjustable centers. Manual adjust nozzle height, approximate 1" min to 9" max. Includes Thomsen model 49921-GA centrifugal pump, 1/2hp motor. Holding tank, approximate 32-3/4" x 10-1/4" x 18" deep. Mounted on stainless steel frame with adjustable feet. Serial# 0806172. 1/60/110 Volt. Last running 4oz bottles of compressor & air tool lubricant.

Stock# 73288001

Used- IMA Swiftpack Complete Solid Dose Bottle Line. Line consists of a Kaps-All Model AU-6C automatic bottle unscrambler with ionized air cleaner, Thermo Ramsey Model Versa RX checkweigher for empty bottles, IMA Model B12 electronic track counter, Themor Ramsey model Versa RX checkweigher with reject, Pharmafill Model CS-2 twin head cottoner with pin indexing, Bellatrx Model SCC chuck capper with cap elevator and sorter (changeparts for 33mm and 38mm caps), Enercon Compak 3200 water cooled induction sealer, Filamatic Model CAL-2-CT Cap retorquer into an Arrowhead 36" accumulation table. All interconnecting conveyor is included.