CALL 630-350-2200
View All Equipment Auctions New Equipment
Appraisals Equipment Reconditioning Asset Management Plant Liquidation Financing Centrifuge Parts & Services
Company Overview Meet Our Team Locations & Contact

Used Alfa Laval Process Equipment

Aaron Equipment has a large inventory of process equipment built by Alfa Laval. Aaron's inventory of Centrifuges, Clean In Place - CIP, Complete Plants, Dryers - Drying Equipment, Evaporators, Filters, General Equipment, Heat Exchangers, Meat Equipment, Packaging Equipment, Pumps, Reactors, Tanks, and Water Treatment Equipment. If you are looking to buy machinery from Alfa Laval submit a request for quote online and if you are looking to sell your used Alfa Laval equipment submit a request online or contact Michael Cohen at 630-238-7480.
Clear
https://images.aaronequipment.com/ItemImages/Centrifuges/Decanter/Alfa-Laval-NX418_53085001_aa.jpg
View

Stock No.:

53085001

Used Alfa Laval Decanter Centrifuge, Model NX418

Used- Alfa Laval NX-418 Solid Bowl Decanter Centrifuge, Stainless Steel, 3 Phase 460 Volt AC, 50/60 Hertz, 10 HP/12 AMP and 40 HP/38 AMP Motors, 3,500 RPM and 1775 RPM. Previously used for urea-based solvents.

MFR: Alfa Laval

https://images.aaronequipment.com/ItemImages/Centrifuges/Decanter/Alfa-Laval-NX314_54626001_aa.jpg
View

Stock No.:

54626001

Used Alfa Laval NX314 Decanter Centrifuge – 14" Stainless Bowl, 88 GPM, Less Than 10 Hours

Used Alfa Laval NX314 Decanter Centrifuge 14" Stainless Bowl, 88 GPM, Less Than 10 Hours. Has stainless steel contact surfaces, 14" bowl, and tungsten carbide hard-surfaced conveyor flights. Maximum bowl speed of 3,250 RPM and hydraulic capacity up to 20 cubic meters/hour (approximately 88 GPM). Driven by a 15 HP motor with VFD. Includes 25 GPM progressive cavity feed pump, planetary gearbox with torque limiter, vibration and over-torque protection, and gravity discharge for separated liquid and solids. Includes NEMA 4 local control panel. Reported less than 10 operating hours. Serial #2929895, built 2018.

MFR: Alfa Laval

https://images.aaronequipment.com/ItemImages/Heat-Exchangers/Plate-Type/Alfa-Laval-TL15-BFG_54660001_aa.jpg
View

Stock No.:

54660001

Unused Alfa Laval TL15-BFG Gasketed Plate Heat Exchanger – 139 Plates

Unused 2022 Alfa Laval Model TL15-BFG gasketed plate heat exchanger with 139 plates and 1,622.1 square feet of heat-transfer area. The unit has a maximum allowable working pressure (MAWP) of 150 PSI at 150F and a minimum design metal temperature (MDMT) of -20F at 150 PSI. It is ASME and National Board stamped, was purchased new, and has never been placed into service. Year 2022. Possible applications include industrial heating, cooling, heat recovery, process temperature control, HVAC, chemical, food and beverage, pharmaceutical, utility, water treatment, and manufacturing processes using compatible liquid products or process fluids.

MFR: Alfa Laval

https://images.aaronequipment.com/ItemImages/Heat-Exchangers/Plate-Type/Alfa-Laval-TL15-BFG_54660002_aa.jpg
View

Stock No.:

54660002

2022 Alfa Laval TL15-BFG Plate Heat Exchanger – Unused

Unused Alfa Laval TL15-BFG gasketed plate heat exchanger was manufactured in 2022 and includes 139 plates measuring 0.4 mm thick. 1622 SQ FT. The unit has a maximum allowable working pressure (MAWP) of 150 PSI at 150F and a minimum design metal temperature (MDMT) of -20F at 150 PSI. It is ASME and National Board stamped, was purchased new, and has never been placed into service. Year 2022. Possible applications include industrial heating, cooling, heat recovery, process temperature control, HVAC, chemical, food and beverage, pharmaceutical, utility, water treatment, and manufacturing processes using compatible liquid products or process fluids.

MFR: Alfa Laval

https://images.aaronequipment.com/ItemImages/Heat-Exchangers/Plate-Type/Alfa-Laval-TL15-BFG_54660003_aa.jpg
View

Stock No.:

54660003

Alfa Laval TL15-BFG Gasketed Plate Heat Exchanger – Never Used

Never placed into service, this 2022 Alfa Laval Model TL15-BFG gasketed plate heat exchanger provides 1,622.1 square feet of heat-transfer area. The unit has a maximum allowable working pressure (MAWP) of 150 PSI at 150F and a minimum design metal temperature (MDMT) of -20F at 150 PSI. It is ASME and National Board stamped, was purchased new, and has never been placed into service. Year 2022. Possible applications include industrial heating, cooling, heat recovery, process temperature control, HVAC, chemical, food and beverage, pharmaceutical, utility, water treatment, and manufacturing processes using compatible liquid products or process fluids.

MFR: Alfa Laval

https://images.aaronequipment.com/ItemImages/Heat-Exchangers/Plate-Type/Alfa-Laval-TL15-BFG_54660004_aa.jpg
View

Stock No.:

54660004

Unused 2022 Alfa Laval TL15-BFG Plate Heat Exchanger

Available unused, this Alfa Laval Model TL15-BFG plate heat exchanger features 139 gasketed plates and was purchased new in 2022. 1622 square foot. The unit has a maximum allowable working pressure (MAWP) of 150 PSI at 150F and a minimum design metal temperature (MDMT) of -20F at 150 PSI. It is ASME and National Board stamped, was purchased new, and has never been placed into service. Year 2022. Possible applications include industrial heating, cooling, heat recovery, process temperature control, HVAC, chemical, food and beverage, pharmaceutical, utility, water treatment, and manufacturing processes using compatible liquid products or process fluids.

MFR: Alfa Laval

https://images.aaronequipment.com/ItemImages/Heat-Exchangers/Plate-Type/Alfa-Laval-TL15-BFG_54660005_aa.jpg
View

Stock No.:

54660005

Alfa Laval TL15-BFG 139-Plate Heat Exchanger – 2022

2022 Alfa Laval TL15-BFG is an unused gasketed plate heat exchanger equipped with 139 plates and rated for a 150 PSI maximum allowable working pressure. 1622 square foot. The unit has a maximum allowable working pressure (MAWP) of 150 PSI at 150F and a minimum design metal temperature (MDMT) of -20F at 150 PSI. It is ASME and National Board stamped, was purchased new, and has never been placed into service. Year 2022. Possible applications include industrial heating, cooling, heat recovery, process temperature control, HVAC, chemical, food and beverage, pharmaceutical, utility, water treatment, and manufacturing processes using compatible liquid products or process fluids.

MFR: Alfa Laval

https://images.aaronequipment.com/ItemImages/Heat-Exchangers/Plate-Type/Alfa-Laval-TL15-BFG_54660006_aa.jpg
View

Stock No.:

54660006

Never-Used Alfa Laval TL15-BFG Gasketed Plate Heat Exchanger

Purchased new and never put into operation, this Alfa Laval Model TL15-BFG gasketed plate heat exchanger is a 2022 unit with 139 plates. 1622 square foot. The unit has a maximum allowable working pressure (MAWP) of 150 PSI at 150F and a minimum design metal temperature (MDMT) of -20F at 150 PSI. It is ASME and National Board stamped, was purchased new, and has never been placed into service. Year 2022. Possible applications include industrial heating, cooling, heat recovery, process temperature control, HVAC, chemical, food and beverage, pharmaceutical, utility, water treatment, and manufacturing processes using compatible liquid products or process fluids.

MFR: Alfa Laval

https://images.aaronequipment.com/ItemImages/Heat-Exchangers/Plate-Type/Alfa-Laval-TL15-BFG_54660007_aa.jpg
View

Stock No.:

54660007

2022 Alfa Laval TL15-BFG 139-Plate Gasketed Heat Exchanger

Offered in unused condition, this 2022 Alfa Laval TL15-BFG gasketed plate heat exchanger has 139 plates providing 1,622.1 square feet of transfer area. The unit has a maximum allowable working pressure (MAWP) of 150 PSI at 150F and a minimum design metal temperature (MDMT) of -20F at 150 PSI. It is ASME and National Board stamped, was purchased new, and has never been placed into service. Year 2022. Possible applications include industrial heating, cooling, heat recovery, process temperature control, HVAC, chemical, food and beverage, pharmaceutical, utility, water treatment, and manufacturing processes using compatible liquid products or process fluids.

MFR: Alfa Laval

https://images.aaronequipment.com/ItemImages/Heat-Exchangers/Plate-Type/Alfa-Laval-TL15-BFG_54660008_aa.jpg
View

Stock No.:

54660008

Unused Alfa Laval TL15-BFG 1,622 Sq. Ft. Plate Heat Exchanger

This unused 2022 Alfa Laval Model TL15-BFG heat exchanger uses a gasketed plate design with 139 plates and 1,622.1 square feet of heat-transfer surface. The unit has a maximum allowable working pressure (MAWP) of 150 PSI at 150F and a minimum design metal temperature (MDMT) of -20F at 150 PSI. It is ASME and National Board stamped, was purchased new, and has never been placed into service. Year 2022. Possible applications include industrial heating, cooling, heat recovery, process temperature control, HVAC, chemical, food and beverage, pharmaceutical, utility, water treatment, and manufacturing processes using compatible liquid products or process fluids.

MFR: Alfa Laval

https://images.aaronequipment.com/ItemImages/Heat-Exchangers/Plate-Type/Alfa-Laval-TL15-BFG_54660009_ae.jpg
View

Stock No.:

54660009

Alfa Laval TL15-BFG Gasketed Heat Exchanger – 139 Plates, 2022

Manufactured in 2022, this unused Alfa Laval TL15-BFG gasketed plate heat exchanger is configured with 139 plates at 0.4 mm thickness. 1622 square foot. The unit has a maximum allowable working pressure (MAWP) of 150 PSI at 150F and a minimum design metal temperature (MDMT) of -20F at 150 PSI. It is ASME and National Board stamped, was purchased new, and has never been placed into service. Year 2022. Possible applications include industrial heating, cooling, heat recovery, process temperature control, HVAC, chemical, food and beverage, pharmaceutical, utility, water treatment, and manufacturing processes using compatible liquid products or process fluids.

MFR: Alfa Laval

https://images.aaronequipment.com/ItemImages/Heat-Exchangers/Plate-Type/Alfa-Laval-TL15-BFG_54660010_aa.jpg
View

Stock No.:

54660010

2022 Alfa Laval TL15-BFG 1,622.1 Sq. Ft. Heat Exchanger

This Alfa Laval Model TL15-BFG is a 2022 unused plate heat exchanger with a gasketed 139-plate configuration and 1,622.1 square feet of heat-transfer area. The unit has a maximum allowable working pressure (MAWP) of 150 PSI at 150F and a minimum design metal temperature (MDMT) of -20F at 150 PSI. It is ASME and National Board stamped, was purchased new, and has never been placed into service. Year 2022. Possible applications include industrial heating, cooling, heat recovery, process temperature control, HVAC, chemical, food and beverage, pharmaceutical, utility, water treatment, and manufacturing processes using compatible liquid products or process fluids.

MFR: Alfa Laval

Sell Equipment

Have surplus equipment? We offer flexible options including direct purchase, consignment, or listing on our marketplace — all backed by trusted professionals.

Learn about selling

Buy Used Equipment

Discover one of the world’s largest inventories of used processing and packaging equipment — ready to ship and backed by decades of industry expertise.

Browse all equipment

Auctions

Join global buyers and sellers at AIS-hosted auctions featuring top-quality surplus equipment from leading facilities around the world.

View current auctions