CALL 630-350-2200
View All Equipment Auctions OEM & New Equipment
Appraisals Equipment Reconditioning Asset Management Plant Liquidation Financing Centrifuge Parts & Services
Company Overview Meet Our Team Locations & Contact

Used Fitzpatrick Process Equipment

Aaron Equipment has a large inventory of process equipment built by Fitzpatrick. Aaron's inventory of Crushers, Dryers - Drying Equipment, Machine Tools, Mills, Mixers, and Roll Compactors. If you are looking to buy machinery from Fitzpatrick submit a request for quote online and if you are looking to sell your used Fitzpatrick equipment submit a request online or contact Michael Cohen at 630-238-7480.
Clear
https://images.aaronequipment.com/ItemImages/Mills/Hammer-Mill/Fitzpatrick_53264025_aa.jpg
View

Stock No.:

53264025

Stainless Hammer Mill by Fitzpatrick – Screw Feeder, Mounted on Casters

Used Fitzpatrick Hammer Mill, Swinging Hammers, with Screw Feeder (no name plate). Approximate chamber 11" x 6". Swinging hammers. Motor: 575 volt, 3500 rpm. Includes feed hopper and screw feeder, stainless steel control panel. Mounted on frame with casters. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Fitzpatrick

https://images.aaronequipment.com/ItemImages/Mills/FitzMill/Fitzpatrick-DKASO6_54406001_aa.jpg
View

Stock No.:

54406001

Used Fitzpatrick FitzMill DKASO6 – Stainless Steel Hammer Mill with Screw Feeder & Explosion Proof Motor

Used- Fitzpatrick Fitzmill, Model DKASO6. Stainless steel construction. Screw feeder with hopper. 15 HP explosion proof (XP) motor. Portable base on casters. Includes separate Control panel on casters. Serial# 11497.

MFR: Fitzpatrick

https://images.aaronequipment.com/ItemImages/Roll-Compactors/Roll-Compactors/Fitzpatrick-16Lx20D_51188005_aa.jpg
View

Stock No.:

51188005

Used Fitzpatrick Chilsonator Model 16Lx20D with HAS030 Comminutor Mill – Stainless Steel

Used Fitzpatrick Chilsonator Model 16Lx20D with HAS030 Comminutor Mill, All stainless-steel wetted parts. The Chilsonator uses dual 16" x 20" radial cored rolls with controlled hydraulic pressure and feed augers to compact powders into fees screws for improved flow and reduced dust. These feed screws are then processed by the HAS030 Comminutor Mill, which employs interchangeable screens and a hammer/knife design for precise particle size reduction. This integrated system delivers efficient compaction, milling, and screening for pharmaceutical, chemical, food, and specialty material applications. (A 102-1/2" , 5 DECK SCREENER IS NOT INCLUDED WITH THIS SYSTEM. AARON WILL FACILITATE LOADING INCLUDED IN THE FINAL PRICE). Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Fitzpatrick

https://images.aaronequipment.com/ItemImages/Mills/FitzMill/Fitzpatrick-DKAS012_50366004_aa.jpg
View

Stock No.:

50366004

Used Fitzpatrick FitzMill DKAS012 Stainless Steel Hammer Mill – 25 HP Pharmaceutical & Food Grade Mill

Used Fitzpatrick FitzMill DKAS012 Stainless Steel Hammer Mill 25 HP Pharmaceutical & Food Grade Mill. Chamber: 12.5" wide x 15.37" long, with center screen support bar, screens not included. 32 milling blades, fixed blunt flat-edge/knife edge, reversible. 10" flange inlet. 16" x 19" oval discharge with banding groove, 75.5" above base elevation. Driven by a 25 HP, 3/60/230/460 Volt, 1770 RPM motor. Welded stainless steel portable base frame (4" box tubing), 42"W X 48"L. Serial# 9084.

MFR: Fitzpatrick

https://images.aaronequipment.com/ItemImages/Mills/FitzMill/Fitzpatrick-D_10211226_aa.jpg
View

Stock No.:

10211226

Used Fitzpatrick Fitzmill Model D Comminuting Machine – 3 HP, Stainless Contact, Gravity Fed

Used- Fitzpatrick Fitzmill Comminuting Machine, Model D. Stainless steel material in contact with product. 3HP. Unit is gravity fed with slanted inlet throat with an opening of 4.75"H X 5.75"W. 6" wide milling chamber with a 10" diameter rotor. Mill Rotor: 16 pivoting blades, plain bars 1" wide X 0.25" thick. Bottom discharge hopper with 7.75" flange, 42.25" above base elevation. Portable carbon steel stand with a base area of 42" X 46". 3HP two-speed v-belt drive, 1750 RPM TEFC motor. Supply power: 115/230V, 60Hz, single phase AC. Bottom sizing screens not included.

MFR: Fitzpatrick

https://images.aaronequipment.com/ItemImages/Roll-Compactors/Roll-Compactors/Fitzpatrick-4L-x-10D_49227002_aa.jpg
View

Stock No.:

49227002

Used Fitzpatrick Chilsonator – Model 4L x 10D, 10" x 4" Stainless Steel Rolls, 50–100 kg/hr Capacity

Used Fitzpatrick Chilsonator Model 4L x 10D, 10" x 4" Stainless Steel Rolls, 50100 kg/hr Capacity. Dependent on density of product and roll pressure and screw speed is 50 to 100 kg/hr. (110 to 220 lbs./hr).

MFR: Fitzpatrick

https://images.aaronequipment.com/ItemImages/Mills/FitzMill/Fitzpatrick-D_54429001_aa.jpg
View

Stock No.:

54429001

Used Fitzpatrick Fitzmill Model D Hammer Mill on Mobile Frame with 7.5 HP Motor

Used Fitzpatrick Fitzmill, Model D,. Stationary knives, reversible blade assembly with knives. pan fed, variable speed. Mounted on a frame with casters. Driven by a 7.5 hp, 3/60/130-460V, 1740 rpm motor. Approximate OAD 59" x 26" x 58".

MFR: Fitzpatrick

https://images.aaronequipment.com/ItemImages/Mills/Hammer-Mill/Fitzpatrick-D_409351_aa.jpg
View

Stock No.:

409351

Used Fitzpatrick Fitz-Mill Model D Hammer Mill with VFD Control

Used Fitzpatrick Fitz-Mill Model D Hammer Mill with VFD Control. 5" x 6" feed throat with top hopper. Approximately 12" diameter cutting chamber. (16) 4" long x 1" wide x 1/4" thick fixed blades. Driven by a 7-1/2hp 3/60/220/440 Volt 1750 rpm motor. Includes control panel with GS2 AC Drive. Mounted on a carbon steel frame.

MFR: Fitzpatrick

https://images.aaronequipment.com/ItemImages/Mills/FitzMill/Fitzpatrick-DAS06_11059358_aa.jpg
View

Stock No.:

11059358

Used Fitzpatrick DAS06 FitzMill Hammer/Knife Mill – Explosion Proof (XP) Motor

Used- Fitzpatrick DAS06 Fitzmill Hammer/Knife Mill. Stainless Steel; Pan Feed; Driven by 7.5 HP, 230/460V, 1740 rpm Explosion Proof (XP) motor. Serial# 10321. Mounted on stainless steel cart with wheels.

MFR: Fitzpatrick

https://images.aaronequipment.com/ItemImages/Mills/FitzMill/Fitzpatrick-M5A_11059359_aa.jpg
View

Stock No.:

11059359

Used Fitzpatrick Fitzmill Hammer Mill, Model M5A

Used- Fitzpatrick Fitzmill Hammer Mill, Model M5A. Vari-speed drive. Serial# 1987. Last used in sanitary pharmaceutical plant.

MFR: Fitzpatrick

https://images.aaronequipment.com/ItemImages/Mills/FitzMill/Fitzpatrick-D6-PCS-040_53778001_aa.jpg
View

Stock No.:

53778001

Used Fitzpatrick Fitzmill VFS-D6A Hammer Mill for Sale – 1000 kg/hr

Used- Fitzpatrick Fitzmill, Model VFS-D6A-PCS-LB / VFS D6-PCS-0401 Hammer Mill. Throughput rates of 200 - 1,000 kg/hr (depending on product). 10" gravity Feed hopper with 3" diameter x 18" long metering screw. 6" wide x 10" diameter Chamber with (16) 4" long x 1" wide x 3/16" thick blades on a fixed blade rotor. Direct drive. XP Controls, Allen Bradley SLC 5/03 PLC, A/B HMI, A/B Powerflex 70 drive. Stainless steel construction. Mounted on casters. Serial# 11839.

MFR: Fitzpatrick

Sell Equipment

Have surplus equipment? We offer flexible options including direct purchase, consignment, or listing on our marketplace — all backed by trusted professionals.

Learn about selling

Buy Used Equipment

Discover one of the world’s largest inventories of used processing and packaging equipment — ready to ship and backed by decades of industry expertise.

Browse all equipment

Auctions

Join global buyers and sellers at AIS-hosted auctions featuring top-quality surplus equipment from leading facilities around the world.

View current auctions