Used Dryers and Drying Equipment for Sale
Used dryers and drying equipment are industrial systems designed to remove moisture from solids, powders, slurries, or liquids through thermal, mechanical, or vacuum-based processes. These systems are widely used in chemical processing, food production, pharmaceuticals, minerals, and environmental applications where moisture control is critical to product quality and stability. Dryers support processes such as evaporation, dehydration, and solvent removal across a wide range of materials. Aaron Equipment offers used dryers and drying equipment for sale in various configurations to meet specific process requirements, capacities, and operating conditions. Browse available inventory below or explore dryer types to find equipment aligned with your application.
Stock No.:
11453451Used Gruenberg Model T18HS74.35SS Stainless Steel Industrial Oven – 74 Cu. Ft. Capacity
Used (1) Gruenberg Model T18HS74.35SS Stainless Steel Industrial Oven. Approximately 74 cubic foot capacity. Single door, steam heated. 34,500 btu input. 55 Degrees C temp limit. 3/60/460 volt. Serial# 0707000021.
Stock No.:
11453452Used Gruenberg T18HS74.35SS Industrial Steam-Heated Oven – 74 Cu. Ft.
Used (1) Gruenberg Oven, Model T18HS74.35SS, Stainless Steel Construction. Approximately 74 cu ft capacity. Single door, steam heated. 34,500 btu input. 55 Degrees C temp limit. 3/60/460 volt. Serial# 27722.
Stock No.:
10128104Used Fluid Air Magnaflo Magnacoater 0020P | Fluid Bed Dryer Granulator & Wurster Coater
Used- Fluid Air model 0020P Magnaflo Magnacoater fluidized bed dryer, granulator, coater system. This lab to pilot scale system can do Wurster coating. It is constructed of stainless steel. It has a 46 liter total volume bowl and has a 34 liter max granulating capacity and a 31 liter max coating capacity. this unit is mounted on casters for portability. 230 vac 3 ph power required. Serial number 10200. Overall dimensions are 90" wide by 38" deep by 79" tall.
MFR: Fluid Air
Stock No.:
46981001Used Fluid Air Fluid Bed Dryer Granulator
Used- Fluid Air Fluid Bed Dryer Granulator, Model 0020. 316 Stainless steel product contact parts, currently set up with dryer chamber, chamber designed to handle Wurster coating with change parts, electrically heated with 12 kw heater, blower, with on board plc controls with HMI interface, 575 volt. Serial # 10169. Built 1999.
MFR: Fluid Air
Stock No.:
52380001Spray Drying Plant Rica-Tec(Anhydro) Used
Used- Rica-Tec(Anhydro) Spray Drying Plant consisting of (1) Rica Tec(Anhydro) Spray Drying tower, 304 Stainless steel. Centrifugal Atomizer, type 18D-320-FH 150,. (XXXX kg /hr.), Output powder capacity 1-1.2 tonnes/hr. (4) Stainless steel cyclones, (1) Heating system steam/electrical, (1) Blower for air supply, 4500 kgs, (1) Heat recovery system, (1) Blower for exhaust, 6000 kgs, (1) Rica Tec (Anhydro) Fluid Bed Dryer, Capacity 2 tonnes/hr. Stainless steel, (1) 2-Deck Screen/Sifter, Stainless steel. (1) Bag filter. Controls. Complete with sensors, valves, pumps, I-beam structure, stairways, additional infrastructure and support. New 1994. Previously used in a Soya oil powder application. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
MFR: Anhydro
Stock No.:
53036001Used Anhydro Spray Dryer, Type 111 AK Series | 66–132 lbs/hr | 304 Stainless Steel | Cyclone, Slurry Tank, Pump & Controls | Ceramic Application | Built 1995
Used- Anhydro Spray Dryer, type 111 AK Series. Capacity 66-132 lbs/hr. (30-60 kgs/hr.) end product. 304 stainless steel on product contact parts, fluid atomizer type nozzle. Incl. (1) Cyclone, (1) 115-liter (30-Gallon) slurry tank with agitator, (1) Seepex Model 006- 12 Progressive cavity pump, (1) Electric burner, (1) Control Panel. Complete with mezzanine and additional infrastructure. Previously used in a ceramic application. New 1995. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
MFR: Anhydro
Stock No.:
53719003Used Labtex ESTDi Spray Dryer | 3000W Heater | Stainless Atomizer | Built 2018
Used Labtex ESTDi Spray Dryer | 3000W Heater | Stainless Atomizer | Built 2018. Components include: Main drying chamber; Stainless steel atomizer .5mm jet nozzle assembly; Inlet air filter; Peristaltic pump; Blower; Heater; Compressor: U-bend; Conveying tube; Cyclone; Control panel; Additional ancillary equipment/parts. 3000 W max. heater power; 19.8 Ft/s max. blower speed; .515 gal/hr max. pump speed; 41-90 degrees F min/max. ambient temperature; Ambient to 392 degrees F temperature range.1/50-60/220-240V. Built 2018. Previously used for SiO/TiO2.
Stock No.:
53937001Used Niro Mobile Minor Spray Dryer – Stainless Steel | With Atomizer | Serial #1952
Used Niro Mobile Minor Type HT Portable Spray Dryer, Stainless Steel. Approximate 32" diameter x 24" straight side. Drying capacity approximate 2.2-15.4 lbs (1-7 kilos) an hour. Electrically heated, temperature approximately up to 350 degrees C. Top entering Niro rotary atomizer, air driven. Includes cyclone, control panel. Center bottom outlet. On wheels. Serial# 1952.
MFR: Niro
Stock No.:
54039001Used Aeromatic Aeroglide C1 120-65 RGC Fluid Bed Dryer – 5,000 lbs/hr, Stainless Steel, Natural Gas, Built 2005
Used- Aeromatic Aeroglide Dryer, Model C1 120-65 RGC. Up to 5000 lbs/hr (dependent on product); Drying Bed Area 350 sq. ft. drying area; 140 sq. ft. cooling bed area; 9'9" bed width; 152.4mm (6") max. first stage bed depth; 152.4mm (6") max. second stage (cooling) bed depth; Food grade 304 stainless steel construction; Natural gas fueled. 3/60/460V. SN 05153-02. Built 2005.
MFR: Aeromatic
Types of Used Dryers Available
Aaron Equipment offers a range of used dryers and drying equipment designed to support moisture removal, thermal processing, and material conditioning applications:
Rotary Vacuum Dryers – Enclosed systems that operate under vacuum to dry heat-sensitive or solvent-based materials at lower temperatures.
Fluid Bed Dryers – Systems that suspend particles in heated air for efficient and uniform drying of powders and granules.
Spray Dryers – Continuous systems that convert liquid feed into dry powder by atomizing into a heated drying chamber.
Drum Dryers – Rotating drum systems used for drying slurries and viscous materials into flakes or powders.
Belt Dryers – Continuous dryers that move material across a conveyor belt for controlled, uniform drying.
Freeze Dryers & Lyophilizer Dryers – Low-temperature vacuum systems that remove moisture through sublimation, preserving sensitive materials.
Dryer Applications & Industry Uses
Used dryers and drying equipment are essential across industries where moisture removal and product stability are critical. Common applications include:
Chemical Processing: Drying powders, crystals, and intermediates
Food & Beverage: Dehydration of ingredients, powders, and finished products
Pharmaceutical Manufacturing: Drying active ingredients and formulations under controlled conditions
Minerals & Materials: Drying bulk solids, ores, and aggregates
Environmental & Waste Processing: Sludge drying and waste volume reductio
These systems improve product shelf life, reduce transportation costs, and ensure consistent material properties.
Used Dryer Buying Considerations
When selecting used dryers and drying equipment, it is important to evaluate both process requirements and equipment condition:
Material Characteristics: Moisture content, particle size, and heat sensitivity
Drying Method: Vacuum, convection, conduction, or spray drying depending on application
Throughput Capacity: Match system output with production requirements
Temperature Requirements: Ensure compatibility with material stability limits
Energy Efficiency: Evaluate operating costs and heat utilization
Condition & Maintenance History: Review wear components, seals, and prior usage
Why Buy Used Dryers and Drying Equipment
Buying used dryers and drying equipment provides a cost-effective solution for expanding processing capacity without the long lead times of new systems. Used equipment offers proven performance and is often available for immediate shipment, helping facilities maintain production schedules and reduce capital investment.
Aaron Equipment sources high-quality dryers from leading manufacturers, providing reliable solutions for demanding industrial drying applications.
Sell Your Used Dryers
Aaron Equipment actively purchases surplus dryers and drying systems across all configurations. Whether upgrading equipment or liquidating assets, our team can help maximize value.
Industrial drying equipment is used to remove moisture from materials such as powders, solids, or liquids using heat, air, or vacuum processes to improve stability and usability.
Common types include rotary dryers, fluid bed dryers, spray dryers, drum dryers, belt dryers, and freeze dryers, each designed for specific materials and drying methods.
Choosing the right dryer depends on material properties, moisture content, temperature sensitivity, and required throughput. The drying method and system design are critical factors.
Yes. Used dryers are built for long service life and can remain highly reliable when properly maintained, inspected, and refurbished if necessary.
Drying equipment is used in chemical processing, food production, pharmaceuticals, minerals, and environmental industries where moisture removal is essential.