Used Plastics Equipment for Sale
Used plastics equipment includes a wide range of processing systems designed for manufacturing, compounding, forming, and recycling plastic materials. These machines support critical operations such as extrusion, injection molding, pelletizing, size reduction, and film production. Commonly used across plastics manufacturing, packaging, automotive, and recycling industries, plastics equipment enables efficient material processing and consistent product quality. Aaron Equipment offers a large inventory of used plastics equipment in various configurations to meet production requirements, material types, and throughput demands.
Stock No.:
54129001PET Sheet Extrusion Line – 48” Wide, 2,000 lbs/hr, OMV D140 Extruder, (Used)
Used- PET Sheet Extrusion Line Capable up to 48" Wide, currently has 32"W Allied Flex-Lip Extrusion Die. 2,000 lbs/hr, OMV D140 Extruder (Used) 350 HP main motor; 30 HP drive system; Rated up to 2,000 lbs/hour (dependent on material and configuration); Multi-zone cooling rolls; Chrome-polished roll stack. OMV Single Screw Extruder, Model D140 6P. 6" diameter. SN 01087; 3/60/480V. Built 2001. With Operating panel, Conveyor, Draw rolls, Temperature control system, Chiller, Vacuum loader, and Winder/accumulator.
Stock No.:
53459033Used THM ZM 1000 Granulating System with Infeed & Discharge Conveyors – Complete Recycling Granulation Line
Used- THM Recycling Solutions GmbH ZM 1000 Granulating unit consisting of the following: (1) THM Inlet Belt conveyer, type FR300/235/215-25-7500, Serial 2023-11252, New 2024, (1) THM Recycling Solutions GmbH Granulator, type ZM 1000, Serial # E-1752, New year 2023, (1) THM outlet Belt conveyer, type FR300/235/215-25-7500, Serial 2023-11253, New year 2024, (1) HAG GmbH Hydraulic Unit, type HA-SNP-P-20-14-0-7.5. 12 BAR, (3) Control and operating panel. Incl. piping and additional infrastructure. Part of an auction sale. Available in end of July 2026. Part of an auction event. An additional 18% Buyers Premium will add to the purchasing price.
Stock No.:
53713029Used Gala MAP 7 Manual Adjustable Pelletizer – 500–6,000 kg/hr, 15kW Motor
Used Gala Manual Adjustable Pelletizer, Model MAP 7. Typical output rate 500 to 6,000 kg/hr. Driven by a 15kW, 3/60/230/460 volt, 1752 rpm motor. Mounted on a stand with wheels. Serial# 10400445.
MFR: Gala
Stock No.:
51065017Used Cumberland Quietizer Model 6 Pelletizer – 10 HP, Industrial Pelletizing Machine
Used- Cumberland Quietizer Pelletizer, Model 6. Approximate 6-5/8" long x 8" diameter. 16 Blade, 8 installed. Driven by a 10 hp, 3/60/230/460 volt, 1745 rpm variable speed gear motor. Approximate 3" diameter rubber roll. Mounted on painted carbon steel frame. Serial# 326050-B-85005.
MFR: Cumberland
Stock No.:
42275063TRIA GRANULATOR XT 100-80
Used- TRIA GRANULATOR XT 100-80 Granulating chamber 40.94" x 31.50" (mm.1.040*800) 75kw drive New rotor, diam 620 mm (24,41") 1.000 mm.wide (40'') N.5 Rotor knifes N.2 Fixed knifes Electrical hopper opening Blower and cyclone Included new electric panel rotor bearings, motor bearings replaced 12 mm dia. screen (or bespoke) constructed in 2004. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible. Has open rotor.
Stock No.:
42373007Used Theysohn TSK 090 Twin Screw Co-Rotating Compounding Line – 90 mm, 36 L/D, 500 kg/hr, Underwater Pelletizer
Used- Theysohn TSK 090, 90 mm Twin Screw Co-Rotating Compounding Line. Plastic compound and masterbatch, PE, PP 500 kg/h. Segmented screw and barrel. 36 LD. Underwater pelletizer. Pellet water cooler and centrifuge dry system. n: 300/1 min. gearbox reduction.
MFR: Theysohn
Stock No.:
43504003Used Conair Insulated Drying Hopper – 100 Cu. Ft. Capacity, Screw Conveyor & Controls
Used- Conair Insulated Drying Hopper. Approximate working capacity 100 cubic feet. Mounted on a stand. Includes magnet on the discharge, and screw conveyor with controls.
MFR: Conair
Stock No.:
44882019Used 15 HP Gear Pump – Model LS56/56 | High-Performance Pump for Extrusion Applications
Used 15 HP gear pump, model LS56/56. Previously used on 4.5" Davis Standard extruder.
Stock No.:
10755169Used Vecoplan/Cumberland Shredding Package – RG62/150UXL Shredder, 1462 Granulator, 48” Infeed Conveyor, Controls
Used- Vecoplan/Cumberland Shredding Package. Includes Vecoplan model RG62/150UXL single shaft shredder. Serial# 10118010, built 2007. 20? diameter rotor with seventy-four (74) 40mm cutters. Single counter knife. Powered by a 150 HP (111.86 KW) VEM 460-volt motor through a PGR Drive Technologies type PH 72 DH gearbox. 63? x 80? hopper opening. Hydraulic horizontal ram with 5.9 KW (7.5 HP) hydraulic package. Shredder is mounted on a 37 " tall riser base. 2" holes in installed screen. Includes spare screens with 2" holes; Shredder gravity discharges into a Cumberland Model 1462 granulator. S/N 84550-07001. Granulator has 14" x 62" throat opening with a five (5) knife high shear/ twin shear open rotor. Two (2) bed knives. Rotor is belt driven by a nominal 100 HP motor (tag missing). Includes 5 HP hydraulic package with v-track and hydraulic cylinder to move the granulator out of production area for servicing. Manufactured 2007. 460/3/60; Lenco model NS-FTFSB-48332 48" wide in-feed conveyor, S/N S23197-001. Unit has a 48" wide belt with 12" high sides. Entrance to the conveyor is a 48" long horizontal section which transfers into a 332" long incline section at an 18.8-degree incline. Conveyor discharges at a height of 137". Belt is driven by a 1 HP inverter duty motor. Conveyor is set up for 30 FPM. Manufactured in 2020. Conveyor is disassembled and skidded for shipment; Free standing OEM panel with Allen Bradley HMI. Panel controls shredder and granulator. 480/3/60. 319 FLA.
MFR: Vecoplan
Stock No.:
10755172Used Rosenthal 36" Servo-Driven Sheeter – Model WM3HUJEAAAPLCC-24, Integral Unwind, 750 lb Capacity, AB Controls
Used- Rosenthal Model WM3HUJEAAAPLCC-24, 36" Sheeter. Integral unwind with 3" air shaft, 6" chucks, brake, and dancer. Unwind rated at 750-pound capacity. Allen Bradley Panel View 300 PLC control. Servo driven. Integral variable speed belt run off table. Caster mounted. Locking feet. 240v. Serial# 81227.
MFR: Rosenthal
Stock No.:
10755180Used Boston Matthews Belt Puller – 3” x 23”, 1HP DC Motor, Adjustable Height, Air Pinch
Used- Boston Mathews Belt Puller. 3" Wide x 23" Long. 1HP 180V 1,750 RPM DC motor into a gearbox with an air operated belt pinch mounted on an adjustable height pad. No speed control is included.
MFR: Boston Mathews
Stock No.:
10755138Used EDI 89" Ultraflex H75 Sheet Extrusion Die – Precision Industrial Die
Used- EDI 89" Ultraflex H75 Sheet Extrusion Die. 000-.075 Lip Opening with .300 Lip Length. All Flow Surfaces Ultrachrome II Plated .001-.0015 Thick. 480 Volt Single Phase Operation. 9 Zones with a total of (14) 500 Watt Heaters. Horizontal Position Die Operation. Upper & Lower Body Compound Angle Upper Body. Lower Body Extra Thick End Plate. Lower Body is Drilled and Tapped 3/8-16" (8) Positions. 1.5" on Center on Both Ends of the Lower Body for Optional Deckeling. Mfg. 2000.
MFR: EDI
Types of Used Plastics Equipment Available
Aaron Equipment offers a wide selection of used plastics equipment designed to support extrusion, molding, compounding, pelletizing, and recycling processes across a variety of polymer materials and production requirements:
Single Screw Extruders – Widely used extrusion systems for processing thermoplastics into film, sheet, pipe, and profile products.
Twin Screw Co-Rotate Extruders – High-performance compounding extruders designed for precise mixing, blending, and material modification.
Injection Molders – Horizontal – Standard molding machines used for high-volume production of plastic parts with consistent precision.
Pelletizing Machinery – Strand Pelletizers – Systems used to cut extruded plastic strands into uniform pellets for downstream processing or sale.
Size Reduction – Grinders and Granulators – Equipment designed to reduce scrap plastic into reusable material for recycling and reprocessing.
Blown Film Lines – Complete systems for producing plastic films used in packaging, bags, and flexible materials.
Plastics Equipment Applications & Industry Uses
Used plastics equipment supports a wide range of manufacturing and recycling operations where plastic materials must be formed, processed, or reconditioned. Common applications include:
Packaging Manufacturing: Production of films, bags, containers, and flexible packaging materials
Automotive & Industrial: Molding and extrusion of durable plastic components and parts
Recycling Operations: Size reduction, washing, and pelletizing of post-industrial and post-consumer plasticsConstruction Materials: Production of pipe, profiles, insulation, and structural components
Consumer Goods: High-volume manufacturing of plastic products and housings
These systems play a critical role in maintaining material consistency, throughput efficiency, and product quality across plastics processing operations.
Used Plastics Equipment Buying Considerations
When selecting used plastics equipment, it is important to evaluate both process requirements and equipment condition:
Material Compatibility: Ensure equipment supports specific polymers such as PE, PP, PVC, PET, or engineered resins
Process Type: Determine whether extrusion, molding, pelletizing, or recycling systems are required
Throughput & Output Capacity: Match machine performance with production targets
Screw & Barrel Design: Critical for mixing efficiency, melt quality, and product consistency
Control Systems & Automation: Evaluate PLC systems, controls, and integration capabilities
Condition & Maintenance History: Review wear components, rebuild status, and prior application.
Why Buy Used Plastics Equipment
Buying used plastics equipment provides a cost-effective solution for expanding production capacity or upgrading existing processing lines. Used systems reduce capital investment while offering proven, industrial-grade performance. Many machines are available for immediate shipment, helping facilities avoid long lead times and maintain production schedules.
With access to a wide range of equipment types and manufacturers, Aaron Equipment helps processors find reliable plastics machinery tailored to their specific operational needs.
Sell Your Used Plastics Equipment
Aaron Equipment actively purchases surplus plastics equipment, including extrusion systems, injection molding machines, and recycling lines. Whether you are upgrading equipment or liquidating assets, our team can help maximize equipment value.
Plastics equipment is used to process, form, and recycle plastic materials through operations such as extrusion, injection molding, pelletizing, and size reduction. These systems are essential in manufacturing and recycling environments.
Common types include extruders, injection molding machines, pelletizers, shredders, grinders, and film production lines. Each type supports a specific stage of plastics processing or recycling.
Choosing the right equipment depends on material type, production volume, and process requirements. Evaluating machine configuration, throughput, and compatibility with existing systems is critical.
Yes. Many plastics machines are built for long service life and can remain highly reliable when properly maintained, inspected, or refurbished prior to purchase.
Plastic recycling systems typically include shredders, grinders, wash lines, and pelletizers that convert scrap plastic into reusable raw material for reprocessing.