Used Plastics Equipment for Sale
Used plastics equipment includes a wide range of processing systems designed for manufacturing, compounding, forming, and recycling plastic materials. These machines support critical operations such as extrusion, injection molding, pelletizing, size reduction, and film production. Commonly used across plastics manufacturing, packaging, automotive, and recycling industries, plastics equipment enables efficient material processing and consistent product quality. Aaron Equipment offers a large inventory of used plastics equipment in various configurations to meet production requirements, material types, and throughput demands.
Stock No.:
54454001Dusenbery 740AMG Cantilevered Center Surface Slitter Rewinder
Used Dusenbery Duplex Cantilevered Center Surface Slitter Rewinder, Model 740AMG. Maximum untrimmed web width 62". Maximum core length 62". Maximum unwind diameter 40". Unwind & rewind core inside diameter 3" & 6". Maximum roll weight 2700lbs. Max rewind diameter 24" (609mm). Max speed 1000 fpm. Control panel with Allen Bradley SLC 5/04 PLC, A/B DTAM Micro HMI. Serial# 59329. Built 1999. 3/60/460 Volt, 80 Amp. Material last ran flexible package laminations. Slit width 4" minimum. Manual available. Overall dimensions: Slitter 137" x 74" x 82"T, rewinder 114" x 64" x 54"T. Approximately 10,000lbs. This slitter rewinder is commonly used for converting flexible packaging laminations, plastic film, paper, foil, printed webs, label stock, adhesive materials, and other roll goods used in packaging, printing, and industrial web processing applications.
MFR: Dusenberry Engr
Stock No.:
53833001Used Parkinson Model 845 Duplex Slitter Rewinder
Used- Parkinson Duplex Slitter/Rewind, Model 845. 3.94"-63" slit width ranges; 48" unwind diameter; 38" min. core; 72" max. core; 5000 lbs. max roll weight; 0.5-2.5 pounds/linear inch tension control. Winding station: 40" max. winding diameter; 72" shafts max. web; 0.5-2.5 pounds/linear inch tension. Shaftless floor-lift unwind; Allen Bradley PLC; Red Lion 15" touch screen monitor; Yaskawa A100 drives. 20 HP unwinder and winder motors; 15 HP main roll motor. 3/50/400VAC. Built 2017. Previously used for 35-70 micron PVC and PETG heat shrinkable film. With Dalmec shaft remover.
MFR: Parkinson
Stock No.:
53459030Used Coperion ZSK 70 SC Twin Screw Extrusion Line – 800-1,000 kg/hr Polymer Compounding System with Pelletizing Package
Used Coperion ZSK 70 SC Twin Screw Extrusion Line 800-1,000 kg/hr Polymer Compounding System with Pelletizing Package. consisting of: (1) Koch Technik Feeding System & Scholz Dosiertechnik Dosing unit, (1) Coperion ZSK 70 SC Twin Screw Extruder 40:1 L/D (2) 70 mm diameter screws, 40:1 L/D ratio, co-rotating inter-meshing side by side screw design, (9) heated barrels, electrically heated water cooled. Driven by a 250 kw (335.25hp) 400volt drive motor via a Flender gear box, screw speed maximum 200 RPM (1) Die head 26 holes, Frame mounted, Control panel, (2) Coperion ZSB 58 twin screw side feeders, (1) Stainless Steel Water Bath on wheels, (1) Pell-TEC Pelletizer, type SP 300 Easy. New 2011, (1) Vibra Conveyer, WF 814-18DC, New 2009, (1) S+S Metal Separator, (1) Stainless Steel Sifter, (1) Colortronic filling stations incl. scales., (1) Silo, Stainless steel. 20m3. On legs. Part of an auction sale. Available in end of July 2026. Part of an auction event. An additional 18% Buyers Premium will add to the purchasing price.
MFR: Coperion
Stock No.:
54399007Used Coperion Werner & Pfleiderer ZSK 70 F175E Twin Screw Extruder – Co-Rotating High Performance Compounding System
Used- Coperion Werner & Pfleiderer ZSK 70 F175E Twin Screw Extruder, Co-Rotating, (2) 70 mm diameter side by side screws, 23:1 L/D ratio, 6 total barrel sections, (5) heated barrels, electrically heated water cooled. Driven by a 108 kw-330-volt AC drive motor via a PIV gear box. Screw speed maximum 198 RPM. Frame mounted, Control panel. Weight 6.4 tonnes. Extruder: 4600 mm L x 2 mm W x 1700 mm H. Control panel 1250 mm L x 700 mm W x 2150 mm H. Previously used in a compounding. Our Freight Specialists can assist with any customs documents and forms to insure a smooth transition.
MFR: Werner & Pfleiderer
Stock No.:
51226009Used Mitsui Mike 700L High-Intensity Mixer – 75 HP, 304 Stainless Steel
Used- Mitsui Mike 700 Liter Capacity High Intensity Mixer, 304 Stainless Steel. Approximate 36" diameter x 42" deep jacketed bowl. Jacket rated 5 kg/cm2 (71 psi). Two tier bottom blade, driven by a 75hp, 3/60/208-230/460 volt, 1780 rpm motor. Swing away top cover. Side bottom outlet with plug valve. Mounted on a painted carbon steel base. Serial # FM500684.
MFR: Mitsui Mike
Stock No.:
1015103772" Dusenberry Model 815 Duplex Score Cut Slitter-Rewinder
Used- 72" Dusenberry Model 815 Duplex Score Cut Slitter-Rewinder. Having a 25 hp DC and 15 hp DC dual drive system with score slitting assembly duplex differential center wind. Presently set up for one zone control per winding shaft for maximum 28" diameter rolls on 3" cores. Separate Dusenbery Model 863 AK single station unwind for 40" diameter mill rolls on 3" cores with fife guide edge system..
MFR: Dusenberry Engr
Stock No.:
10755174Used Retech VH34/75 Horizontal Shredder – 75 HP, 34” Feed, Vibratory Conveyor, 2” Screen, Built 2006
Used- Retech Model VH34/75 Horizontal Shredder. 5" x 34" in-feed opening, 16" diameter 44 cutter rotor with a 390 RPM rotor speed. Rotor is belt driven by a 75 HP 460V 1185 RPM motor. Two infeed rollers are powered by approximately 1 Kw SEW Euro drive motors and gearboxes. 41.5" in-feed height. 2" holes screen installed. Gravity discharge. Includes stand-alone starter / control panel and a 30' long vibratory in-feed conveyor. Model VR85/12, Serial# 8809020. No controls for conveyor. Serial# 8810010, Built 2006.
MFR: Retech
Stock No.:
10755184Used Retech / Vecoplan VH34/75 Horizontal Shredder – 75 HP with 30' Vibratory Infeed Conveyor
Used- Retech/Vecoplan Model VH34/75 Horizontal Shredder. 5" x 34" in-feed opening, 16" diameter 44 cutter rotor with a 390 RPM rotor speed. Rotor is belt driven by a 75 HP, 460 Volt, 1185 RPM motor. Two infeed rollers are powered by approximately 1 Kw SEW Eurodrive motors and gearboxes. 41.5" in-feed height. 2" holes screen installed. Gravity discharge. Includes stand-alone starter / control panel and a 30' long vibratory in-feed conveyor. Model VR85/12, S/N 8809020. No controls for conveyor. Built 2006.
MFR: Retech
Stock No.:
49422031Used Conair CW1836 Thin Gauge Sheet Granulator – 75 HP, 18” x 36” Throat, Servo Feed, Built 2019
Used- Conair Thin Gauge Sheet Granulator, Model CW1836. 75 HP motor. 18" x 36" Throat size opening. (5) rotor knives. (2) bed knives. Hydraulic lift for easy screen change. Servo pull rolls for auto feed. Stand alone control panel. 3/60/460V. Built 2019.
MFR: Conair
Stock No.:
76515Used - GEC Dual Turret Winder, Model 123-12638-2, 80” Wide
Used GEC Dual Turret Winder, Model 123-12638-2. Handles rolls approximately 80" wide and up to 18" in diameter, ideal for blown or cast film lines, paper/board lines, and flexible packaging operations requiring continuous wide-web winding. The dual-turret design enables non-stop production by pre-loading new cores while finished rolls discharge, significantly reducing changeover downtime and labor versus single-station winders. Mechanical and structural condition reported as good, subject to buyer inspection; photos and inspection available. A high-value production asset priced well below comparable used high-end winders and a fraction of new equipment at this capability.
MFR: GEC
Stock No.:
10755163Used Davis Standard 9" Extruder, Model 80IN80HT – 32:1 L/D, 900 HP Motor, Built 2001
Used- Davis Standard 9" Extruder, Model 80IN80HT. 32:1 L/D ratio; (7) zone electrically heated, water cooled (closed loop), and vented barrel at a 44" center-line; 10.15:1 Gearbox reduction ratio; Gearbox rated at 1080 HP at a service factor of 1.5; Gearbox is direct driven in a wrap-around manner by a 900 HP Reliance Super RPM D/C motor; Liquid cooling system with heat exchanger for gearbox protection; 16" x 9 1/2" on center feed throat entrance; PSI continuous screen changer w/ stand is mounted on the extruder discharge. 16" x 9.5" feed throat with magnet; 52,000 lbs. extruder weight; 1,000 lbs. motor weight. Rare opportunity to purchase an extruder of this size. Per Davis Standard the thrust bearing rating is actually 1,468,000 pounds or 665,874 kgs. Unit was miss tagged at the factory. Serial# AA454. Built 2001. Last used in the extrusion of PP sheet. SCR and temperature control panel not included.
MFR: Davis Standard
Stock No.:
52102001Industrial Twin Screw Extruder – Krauss Maffei Model KMD90, Electrically Heated, Oil Cooled Barrel
Used- 90mm Krauss Maffei Model KMD90 Counter-Rotating Twin Screw Extruder, 20:1 L/D. Has electrically heated oil cooled barrel. Driven by 40HP DC motor with SCR control. Includes temperature control panel.
MFR: Krauss Maffei
Types of Used Plastics Equipment Available
Aaron Equipment offers a wide selection of used plastics equipment designed to support extrusion, molding, compounding, pelletizing, and recycling processes across a variety of polymer materials and production requirements:
Single Screw Extruders – Widely used extrusion systems for processing thermoplastics into film, sheet, pipe, and profile products.
Twin Screw Co-Rotate Extruders – High-performance compounding extruders designed for precise mixing, blending, and material modification.
Injection Molders – Horizontal – Standard molding machines used for high-volume production of plastic parts with consistent precision.
Pelletizing Machinery – Strand Pelletizers – Systems used to cut extruded plastic strands into uniform pellets for downstream processing or sale.
Size Reduction – Grinders and Granulators – Equipment designed to reduce scrap plastic into reusable material for recycling and reprocessing.
Blown Film Lines – Complete systems for producing plastic films used in packaging, bags, and flexible materials.
Plastics Equipment Applications & Industry Uses
Used plastics equipment supports a wide range of manufacturing and recycling operations where plastic materials must be formed, processed, or reconditioned. Common applications include:
Packaging Manufacturing: Production of films, bags, containers, and flexible packaging materials
Automotive & Industrial: Molding and extrusion of durable plastic components and parts
Recycling Operations: Size reduction, washing, and pelletizing of post-industrial and post-consumer plasticsConstruction Materials: Production of pipe, profiles, insulation, and structural components
Consumer Goods: High-volume manufacturing of plastic products and housings
These systems play a critical role in maintaining material consistency, throughput efficiency, and product quality across plastics processing operations.
Used Plastics Equipment Buying Considerations
When selecting used plastics equipment, it is important to evaluate both process requirements and equipment condition:
Material Compatibility: Ensure equipment supports specific polymers such as PE, PP, PVC, PET, or engineered resins
Process Type: Determine whether extrusion, molding, pelletizing, or recycling systems are required
Throughput & Output Capacity: Match machine performance with production targets
Screw & Barrel Design: Critical for mixing efficiency, melt quality, and product consistency
Control Systems & Automation: Evaluate PLC systems, controls, and integration capabilities
Condition & Maintenance History: Review wear components, rebuild status, and prior application.
Why Buy Used Plastics Equipment
Buying used plastics equipment provides a cost-effective solution for expanding production capacity or upgrading existing processing lines. Used systems reduce capital investment while offering proven, industrial-grade performance. Many machines are available for immediate shipment, helping facilities avoid long lead times and maintain production schedules.
With access to a wide range of equipment types and manufacturers, Aaron Equipment helps processors find reliable plastics machinery tailored to their specific operational needs.
Sell Your Used Plastics Equipment
Aaron Equipment actively purchases surplus plastics equipment, including extrusion systems, injection molding machines, and recycling lines. Whether you are upgrading equipment or liquidating assets, our team can help maximize equipment value.
Plastics equipment is used to process, form, and recycle plastic materials through operations such as extrusion, injection molding, pelletizing, and size reduction. These systems are essential in manufacturing and recycling environments.
Common types include extruders, injection molding machines, pelletizers, shredders, grinders, and film production lines. Each type supports a specific stage of plastics processing or recycling.
Choosing the right equipment depends on material type, production volume, and process requirements. Evaluating machine configuration, throughput, and compatibility with existing systems is critical.
Yes. Many plastics machines are built for long service life and can remain highly reliable when properly maintained, inspected, or refurbished prior to purchase.
Plastic recycling systems typically include shredders, grinders, wash lines, and pelletizers that convert scrap plastic into reusable raw material for reprocessing.