Used Packaging Equipment for Sale
Used packaging equipment includes the machinery used to fill, seal, label, wrap, cart, inspect, and prepare products for shipment across a wide range of industries. These systems are used in food and beverage, pharmaceutical, cosmetic, chemical, and consumer goods manufacturing where speed, accuracy, and repeatability are critical. Aaron Kendall Packaging Equipment (AEK) offers used packaging equipment for sale in many configurations, from standalone fillers and labelers to complete packaging lines. Browse available inventory below or review specific packaging equipment types to find equipment that fits your production requirements.
AEK Packaging Equipment combines the expertise, financial resources and global reach of Aaron Equipment Company Inc. and Kendell Equipment.
Stock No.:
73178001Used ELF Machinery 6-Spindle Capper – Model ACT 600L for Sale
Used- ELF Machinery 6 Spindle Capper, Model ACT 600L. 6 tightening quills; Stainless steel construction; 24" gripping belt; 6" belt width opening; adjustable angle cap chute. All quills move independently from center line.
MFR: ELF
Stock No.:
72308001Buy Used Elliott Hot Melt Case Sealer – Top Sealing with Case Elevator & Indexer
Used- Elliott Hot Melt Top Only Case Sealer, Model 76-10 Custom. Nordson Problue glue system, Saturn right angle nozzles, infeed end of the machine is fitted with a case elevator, case infeed indexer, and case pusher. Was set up for bag-in-box sealing. Rated at 1,400 CPH. OSHA guarding and door interlocks. Integral PLC control panel (located on left side of machine). 460 volt/3-phase/60 hz.
MFR: Elliott
Stock No.:
701930463. High-Capacity Elmar 36-Head Filler & 16-Head Zalkin Capper for PET Bottles – For Sale
Used Elmar 36 Station Filler Turret with Fowler Zalkin 16 Head Pick and Place" Capping Turret complete with Infeed Timing Screw, Infeed Starwheel, Intermediate Transfer Starwheel and Discharge Starwheel all mounted on a Monoblock Main Base with the following: 3-3/4" Diameter Super Extended Cylinders (max fill range 67 fluid ounces); 3-3/4" Diameter Stainless Steel "Dome Style" Pistons with PTFE Wear Rings and 0" Ring; Motorized Volume Adjustment; Adjustable Container Rails with Replaceable UHMW Wear Surface; Quick Change Feed Screw Toolless; Change Parts Toolless; Powered Bowl Height Adjustment (3-15/16" to 9-15/16"), for Instant Height Change-Over; Central Lubrication Cluster - Lincoln Automatic Lubrication System (manual pump); Complete Electronic Control System with A-B 5/05 PLC and Operator Station with Allen-Bradley InverterDrive System , 480V/3PH/60HZ; The Elmar Industries Inc. Filler Control system is a programmable logic controller (PLC) based control system. The basic unit controls filler speed, fill volume and the No Container No Filler (NCNF) trip mechanism. Fowler/Zalkin 16-head "Pick and Place" Capping Turret (PCD 498 mm) to mount on a Elmar filler Monoblock. This turret is equipped for the application of 63 mm, screw-on closures to PET bottles, at a rate of applied closures per minute. This machine is equipped as follows: Set of Sixteen (16) Zalkin BH-3 Hysteresis magnetic clutch heads for screw-on closures requiring an application torque of 12 to 36 inch pounds +-10%; Heads are equipped for use with quick change chucks for cap handling and application; Set of Sixteen (16) quick change chucks for the 63 mm screw-on closure. Quick change chucks use a ball and ring assembly for quick release from, and remounting to, the capping head; Telescoping cap chute suitable for the 63 mm closures and suitable for mating with "Nose Over' chute; Cap chute steam cloud box (15" x 3' x 4 long) and cap transfer steam manifold, supplied to heat cap prior to application; Quick Change "Peg & Ring" cap transfer system for smooth closure pick-off from the discharge of the cap chute and transfer to the capping heads. Transfer system is equipped with quick change quick release features to allow for no tools change-over. Transfer system includes sensors for no bottle/no cap control.; Self-contained elevating system for adjusting height of capping turret as required by differing heights of containers. Safeties are included to prevent travel beyond machine limits. Minimum 4", maximum 12" height of container.
MFR: Elmar
Stock No.:
73522001Emplex MPS7503 Continuous Band Sealer with Gas Flush – Used Equipment for Sale
Used- Emplex Bag And Pouch Sealing Systems with: Emplex Pouch Sealer, Model MPS7503. Variable speed up to 800" per minute. Approximate 3/4" seal. With Gas Flush. Temperature range 0 to 392 degrees F. Belt Dimensions: Length: 78 inches Width: 6 inches. Manual crank height adjustment. HMI. Serial No: I10L3. Overall dimensions: Length: 95 inches Width: 32 inches Height: 64 inches. Electrical Requirements: 115 Volts, 60 Hertz, 1 Phase, 12 Amps.
MFR: Emplex
Stock No.:
73725001Used EndFlex PopLok AHL-110 Automatic Fold & Tuck Tray Erector – Glue-Free Corrugated & Chipboard Tray Former
Used- EndFlex PopLok Automatic Fold and Tuck Tray Erector, Model AHL-110, Serial # 23751. Designed to automatically form self-locking corrugated or chipboard trays without glue, tape, mandrels, or forming tooling. Equipped with easy-load blank magazine, vacuum cup blank transfer, pneumatically controlled tucker bars, automatic tray discharge, color touchscreen HMI, Omron PLC, SMC pneumatic components, Venturi vacuum system, interlocked safety doors, NEMA 4 electrical enclosures, heavy-duty welded steel frame, and 24 VDC controls. Handles standard trays without lids from 8" to 21" long x 5" to 15" wide x 2" to 5" deep and trays with lids from 8" to 21" long x 5" to 10.5" wide x 2" to 5" deep. Electrical: 120 VAC, single phase, 60 Hz, 5 amps. Air: 30 SCFM at 80 psi. Suitable for forming self-locking corrugated and chipboard display, shipping, food, retail, and product trays with or without lids.
Stock No.:
73604001Paxiom Endflex BOXXER KARTNR Small Footprint Automatic Cartoner
Used Endflex (Paxiom) Small Footprint Vertical Cartoner, Model BOXXER KARTNR. Capable of speeds up to 60 CPM (depending on application). Size range: 1" (25mm) to 4.5" (114mm) length x 1" (25mm) to 4.5" (114mm) x 2.36" (60mm) to 5" (127mm) carton height. Set up for auto bottom cartons, has automatic bottle dropper and set up for tuck top style cartons. Control panel with Omron PLC, Weintek HMI.
MFR: Paxiom
Stock No.:
73604002Used Boxxer T-18 Automatic Case Forming and Sealing System – 18 CPM
Used- Endflex Boxxer T series Automatic Case Erector, Manual Loader and Automatic Case Taping System, Model T-18. Capable of speeds up to 18 CPM (depending on application). Approximate case size range: 9.5" to 20" long x 7.5" to 16" wide x 5" to 16" diagonal. Automatic Case Erector and bottom taper, Boxx Pack Manual Packing system and EZ-Tape Case Sealer. Control panel with Weintek HMI, Omron Sysmac CP1L PLC. Serial# 18498. 1/60/120 Volt, 7 Amp.
MFR: Paxiom
Stock No.:
73604003Endflex Boxxer T Series T-18 Case Erector with Manual Load & EZ-Tape Sealer
Used- Endflex Boxxer Model T-18 T-series Automatic Case Erector, Manual Loader and Automatic Case Taping System, . Capable of speeds up to 18 CPM (depending on application). Approximate case size range: 9.5" to 20" long x 7.5" to 16" wide x 5" to 16" diagonal. Automatic Case Erector and bottom taper, Boxx Pack Manual Packing system and EZ-Tape Case Sealer. Control panel with Weintek HMI, Omron Sysmac CP1L PLC. Serial# 18498. 1/60/120 Volt, 7 Amp.
MFR: Paxiom
Stock No.:
72834007Pre-Owned Enflex Model F11DX Horizontal Form Fill Seal Machine
Used- Enflex Model F11DX Duplex Horizontal Form and Fill Seal Machine. Capable of speeds up to 220 pouches per minute (depending on application). Pouch size range: 40mm - 70mm (Width) x 40mm - 130mm (Length). Includes Ivek Rotary positive displacement pump with dual nozzles for tandem pouches. Max volume per pouch: 30cc, Max film reel diameter: 450mm. Omron CQM1H-CPU51 PLC, Enflex/Fuji Electric HMI, Keyence MS-H150 drive. Includes Markem smart date coder. Registration. Seal bars: 1st (bottom)- 5-3/8" long, 2nd (side)- 5-1/2", 3rd (top)- 5-3/8", 4th (cutting) 3-1/4". Last used in pharmaceutical ointment application.
Stock No.:
73407001Used Enflex Model F14 Small Footprint Horizontal Form Fill Seal (HFFS) Pouch Machine with Towelette Feeder
Used- Enflex Model F14 Small Footprint Horizontal Form Fill Seal Pouch Machine with Towelette Feeder. Capable of speeds up to 80 indexes per minute (depending on application).Has a pouch size range: ange: 50mm-140mm x 70mm - 200mm. Equipped with towellet feeder Last used in pharmaceutical operation. CE Certified. 3/60/220V.
Stock No.:
73425001Used E-Pak Model 3 Automatic Spindle Capper with Elevator & Sorter
Used- E-Pak Model 3 Spindle Automatic Inline Quill Capper with Integrated Cap Elevator / Sorter. Capable of speeds up to 120 Caps per minute. Container range: 2" - 14" (height) , up to 5.5" maximum diameter. Overall cap size range: 26mm - 110mm diameter, feeder and cap chute last ran 110mm caps and will require change parts for other cap sizes. Has dual belt container grippers, C-Frame design, inclined cap sorter/elevator and floor hopper. 1/60/115V.
MFR: E-Pak Machinery
Stock No.:
73641012Used E-Pak 16 Head Automatic Inline Liquid Filler Microprocessor Controlled
Used ELF E-Pak 16 Head Inline Gravity Pressure Liquid Filler. Has KAPPS-ALL filler heads. Fully automatic, Microprocessor-controlled, Straight-line filler. Approximate OAD 60"x 50"x 80".
MFR: E-Pak Machinery
Types of Used Packaging Equipment Available
Aaron Equipment offers a broad range of used packaging equipment designed for different container types, product formats, and line speeds:
Fillers Liquid Monoblock – Integrated filling and capping systems designed for efficient handling of liquid products in compact packaging lines.
Form and Fill Vertical Auger Fillers – Vertical packaging systems commonly used for powders and granular products requiring consistent fill weights.
Form and Fill Horizontal Pre Made Bags – Machines built to fill and seal premade pouches for flexible packaging applications.
Labelers Pressure Sensitive Print & Apply – Automated labeling systems used to apply variable product, case, or shipping labels at production speeds.
Shrink Equipment Shrink Tunnels – Heat tunnel systems used to shrink film tightly around packaged products for bundling or tamper evidence.
Wrappers Horizontal Flow – High-speed wrappers designed for flow wrapping individual products in film for retail or distribution packaging.
Packaging Equipment Applications & Industry Uses
Used packaging equipment supports end-of-line and primary packaging operations where products must be filled, counted, labeled, inspected, wrapped, or case packed efficiently. These systems are widely used in food processing, nutraceutical and pharmaceutical manufacturing, personal care production, chemicals, and general industrial packaging. Typical applications include pouch filling, bottle filling, cartoning, shrink wrapping, coding, metal detection, and pallet-ready case packaging for finished goods.
Used Packaging Equipment Buying Considerations
When selecting used packaging equipment, evaluate the line requirements as well as the machine condition:
Package Format: Confirm the equipment matches your container style, pouch format, carton size, or film type.
Throughput Requirements: Make sure the machine speed aligns with your target production volume.
Product Characteristics: Consider whether you are packaging liquids, powders, tablets, granules, or solids.
Integration & Controls: Review compatibility with existing conveyors, coders, inspection systems, and plant automation.
Condition & Change Parts: Inspect wear items, available tooling, change parts, and maintenance history when available.
Why Buy Used Packaging Equipment
Buying used packaging equipment can lower capital costs while providing access to proven machinery for filling, labeling, wrapping, and case handling operations. Many systems are available for immediate shipment, which can help reduce downtime and avoid long OEM lead times. Used packaging equipment also gives processors flexibility when expanding a line, replacing a machine, or adding capacity without the expense of buying new.
Sell Your Used Packaging Equipment
Aaron Equipment purchases surplus and used packaging equipment, including fillers, labelers, wrappers, cartoners, and complete packaging lines. If you are upgrading equipment, consolidating lines, or liquidating plant assets, our team can assist with buyouts or consignment opportunities.
Packaging equipment refers to industrial machinery used to prepare products for sale, shipment, or storage. This includes systems for filling, sealing, labeling, coding, wrapping, cartoning, case packing, and inspection. Used packaging equipment helps manufacturers support production needs while reducing upfront capital investment.
Common types of used packaging equipment include fillers, cappers, cartoners, labelers, wrappers, shrink systems, checkweighers, metal detectors, conveyors, and complete packaging lines. Each type is designed for specific product formats, packaging materials, and production speeds.
Choosing the right packaging equipment depends on your product type, container or package style, target throughput, and level of automation. It is also important to evaluate line integration, available change parts, and machine condition to ensure the equipment fits your process and packaging goals.
Yes. Aaron Equipment purchases used packaging equipment across a wide range of categories, from individual machines to complete packaging lines. If you have surplus packaging machinery available, our team can review the equipment and discuss buyout or consignment options.
The cost of used packaging equipment depends on the machine type, manufacturer, speed, configuration, age, and overall condition. Standalone units and complete automated lines can vary widely in price. Contacting a sales representative can help identify available options based on your budget and application.